MAINTENANCE, REPAIR AND REPLACEMENT OF DEFECTIVE ITEMS OF STREET LIGHTS, SECURITY LIGHTS, HIGH BAY LIGHTS, HIGH MAST LIGHTS, SOLAR LIGHTS AND MISC ITEMS AT TECH AREA, OMQ AREA, NP AREA AND WSA AT 2 WG AF STATION PUNE

Amount

M & L for general complaint such as repairing to cable joint /loose connection for any type of fitting will not be included for copper flexible wire of size 23/.0076 for connceting the light to conductor and PVC tape to taping the joint properly shall be included in the rate quoted by the tenderer.

Taking down LED Solar street light all in one , Cleaning/Washing dust from Solar panel, repairing to cable connection /loose connection, checking to battery & topup to distil water including testing complete all as specified and directed.

Taking down old unserviceable old light fitting and S&F post top LED light fitting made in die cast aluminium with glare free indirect lighting uniform distribution and IP65 protection 35 Watt with fixing arrengement like. suitable size GI pipe, flanged stand fixed in PCC with nut bolt fastner etc. complete all as specified and directed. Make: Havells Cat part No. RUBYPT35WLED757PSYMTOPCHPLLEDPCR35W , Product type LED 35W or any other equivalent make with similar specification

Taking down old unserviceable light fitting and S&F LED light fitting, 5700 K, minimum 100 lumen/watt with Aluminium pressure die cast housing with toughened glass with fixture & LED lamp conforms to LM-79 & LM-80 respectively with high spread using high quality lenses & reflector, wide beam angle more than 120°, having accessible driver compartment with constant current driver with effeciency >90% and IP 65 protection, short circuit protection, under voltage protection and Over voltage protection upto 300 V, isolation upto 1.5 kV, impact resistance of IK07 with surge protection upto 5 KV and LED life minimum 50,000 operating hours.

LED street light 35 Watt

LED street light 45 Watt

LED street light 60 Watt

LED street light 70 Watt

LED flood light 160 Watt

LED flood light 180 Watt

LED flood light 200 Watt

Taking down old unserviceable driver from LED light fitting and S&F LED outdoor driver with all electrical connection as per existing make complete all as specified and directed. Make: Cropmton / Bajaj/ Havells/ Wipro/HPL

for LED light fitting bollard 9 W

for LED light fitting 15-30 Watt

for LED light fitting 40-60 Watt

for LED light fitting 72 Watts

for LED light fitting 100 Watts

M&L for servicing of High mast light driving mechanism by checking all electrical and mechanical component, chain, pulely, rope, motor etc and greasing oiling of chain, motor, pulley etc and servicing of motor, control panel, auxiliary contacts, replacement of u/s items i.e toggle switch, indicator light, control wiring complete all as specified and directed. Note: 1.Cost of material and labour of oiling and greasing, suitable auxillary contacts along with checking of all electrical components must be included in the quoted rate. 2. Cost of spare parts other than mentioned in Note 1. will be measured and paid separately.

Material and labour for rewinding of Highmast motor of 3HP capacity using same size and gauge of copper wire and same number of turns complete with insulation and varnishing complete all as specified and directed.

Material and labour for rewinding of Highmast motor of 5HP capacity using same size and gauge of copper wire and same number of turns complete with insulation and varnishing complete all as specified and directed.

Material and labour for gear oil suitable for gear box of highmast complete all as specified and directed.

Material and labour for repairs to gear box including replacement of worn out driving/ driven gears, bearings, gear keys, gasket oil seals suitable for Highmast consisting of 3 HP motor and refixing it at the same location complete all as specified and directed.

Material and labour for repairs to gear box including replacement of worn out driving/ driven gears, bearings, gear keys, gasket oil seals suitable for Highmast consisting of 5 HP motor and refixing it at the same location complete all as specified and directed.

Taking down old rusted wire rope and supply and fix 10mm steel wire rope suitable for highmast complete all as specified and directed.

S&F in replacement of old unserviceable power contactor 25 Amps, AC3, 3 pole operating voltage 415 V AC Capacity complete all as specified and directed. Make : Havells/Bajaj/HPL

S&F in replacement of old unserviceable over load relay of capacity 25 amps complete all as specified and directed. Make : Havells/Bajaj/Crompton or any other equivalent make of same specification.

S&F in replacement of old unserviceable push button in highmast panel complete all as specified and directed.

Material and labour for painting to existing steel tubular poles 9/11 mtr long including cross arms, looping box, GI pipe bracket, clamps etc. with two coat of aluminium paint including preparation of surfaces and feeder name and pole number with zebra type painting upto height of 6 feet from bottom with alternate patch of size 1 foot of white and light blue paint complete all as specified and directed.

Provn of service for cable fault location for LT UG cable XLPE insulated 1100 volts of any size with fault detector machine complete allas specified and directed

Material and labour for straight through jointing kits heat shrinkable type LT UG XLPE cable, 1100 volts heavy duty armoured sheathed including excavation in any strata, taking out cable, and making good disturbed surface after relaying the cable making joints suitable for aluminium conductor of size given below all as specified and directed. [Make : MS Seal / Raychem / Denson]

10 sqmm 2 core

25-50 sqmm 4 core

Taking out of old u/s pole and Supplying and erecting (in true vertical position) steel tubular swaged poles complete with cast iron base plate finial taper plug, bolts nuts and screws all as specified of type 410-SP-31 (9.0 mtr length) complete all as specifed in IS 2713 (part-II) 1980 including one coat of red oxide primer and two coats of aluminium paint to exposed surfaces and with black bituminous paint for embedded portion of pole complete all as specified and directed.

Taking down old unserviceable rusted street light bracket along with the unserviceable fitting attacheds to the bracket and deposit it to the MES store. Supply and fix of steel tubular pole cap using suitable nut bolts and washer suitable for 6/7/9/11 meter pole complete all as specified and directed.

M&L for cement concrete (1:3:6) type C2 in foundation filling and mass concrete using 40mm graded stone agg for pole/stay foundation etc complete all as specified and directed.

M&L for cement concrete (1:2:4) type B1 in foundation filling and mass concrete and coping of poles incl necessary form work using 20 mm graded stone aggregate etc complete all as specified and directed.

Supply, laying, jointing, testing and commissioning of LT under ground cable 1100 volts grade XLPE (cross linked polythene ) armoured with galvanised round steel wire or steel strip , electric power cable heavy duty, with multi stranded aluminium conductor, laid in trenches, ducts fix on walls/poles with proper size saddles and clamp laid under roads/path/ drain /culverts or enclosed in GI pipe/ fix complete all as specified , for following size:-

25 Sqm 3.5 core

16 Sqm 4 core

16 Sqm 2 core

Supply , laying , jointing of aluminium service wire pvc insulated 1.5 sqmm 2 core laid in trenches, ducts fix on walls/poles with proper size saddles and clamp complete all as specified and directed.

Supply , laying , jointing of aluminium service wire pvc insulated 2.5 sqmm 2 core laid in trenches, ducts fix on walls/poles with proper size saddles and clamp complete all as specified and directed.

Supply , laying , jointing of aluminium service wire pvc insulated 4.0 sqmm 2 core laid in trenches, ducts fix on walls/poles with proper size saddles and clamp complete all as specified and directed.

Excavation in trenches not exc 1.5 m wide and not exc 1.5 m in depth and getting it out for laying of cable / pole etc. complete all as specified and directed.

Soft/loose soil

Hard/dense soil

Returning/ Refilling of excavated soil including spreading levelling and well ramming in layers for any type of soil complete all as specified and directed.

Removing the surplus spoil to a distance not exceeding 50 mtrs from the starting point and depositing at a height not exceeding 1.5 m above ground level complete all as specified and directed.

Material and labour for stone dust sand cushioning to under ground cable, provided with a layer 8 cm before and 15 cm after laying and stretching jointing and testing the cable complete all as specified and directed. [Note : Measuremenet will be done after punning]

Supplying and laying un-reinforced precast concrete cable cover, class I, flat, size 250mm x 150mm x 40mm for cable protection complete all as specified and directed.

Taking out the old one and Supply, Install, Test and Commissioning of Feeder pillar box out door type fabricated out of 3 mm thick CRCA sheet double door, of size 500x500x300 mm with neutral link/busbar complete with powder coating with seven tank process mounted on M.S angle Iron frame, duly grouted with PCC reqd. with all electrical connection complete all as directed including following:- (a) S&F MCCB TP 100 Amps 35 KA Ics=100% of Icu , Fixed thermal and fixed magnetic setting -1 Nos ( Haveles Cat part No: IHLFT0100#) (b) S&F Street light Astro mini digital timer, single phase, Base DIN -1 Nos (L&T Cat part No: T2DDT7) (c) S&F contactor 3P, 70 Amps, AC3 Make: L&T, ML-4 -1 Nos (Cat Part No: L&T Cat Part No. SS 90910)

S&F in repair of street light timer, astro mini type for lighting control based on sunrise/ sunset timing by lattitude/ longitude settings time switch 110-240 V AC 1 phase , base /DIN complete all as specified and directed. Make: L&T / Havells/ hager

S&F in replacement of old unserviceable power contactor ML-4, 70 Amps, AC3, 3 pole operating voltage 415 V AC Capacity. Make :- L&T Cat Part No. SS 90910/ Siemens / GI.

S&F in replacement of old unserviceable power contactor ML-3, 40 Amps, AC3, 3 Pole, operating voltage 415 V AC Capacity. Make :- L&T Cat Part No. SS 90721 / Siemens / GI.

Taking down of old u/s and S&F MCCB, 3 Pole, 100 Amps, 415 V AC, 25 kA breaking capacity, Ics=50% Icu with spread terminals with all electrical connection complete all as specified and directed.

Material and labour in replacement of single phase thermoplastic junction box with Aluminium bus bar for phase and neutral along with MCB SP 6 Amps complete all as specified and directed.

Material and labour for repair of metallic junction boxes by using arc/gas welding also supply and fixing new hinges for door of panels/junction boxes, supply and fixing of panel door locks of same existing specification . Also painting of panel with one coat of aluminium paint of same existing color complete all as specified and directed.

Supply and fix Aluminium Lugs of 10 sqmm complete all as specified and directed.

Supply and fix Aluminium Lugs of 16 sqmm complete all as specified and directed.

Supply and fix Aluminium Lugs of 25 sqmm complete all as specified and directed.

Supply and fix Aluminium Lugs of 35 sqmm complete all as specified and directed.

Supply and fix Aluminium Lugs of 50 sqmm complete all as specified and directed.

S&F in repair of multi core flexible copper conductor PVC insulated and sheathed cable, 1100 Volts, 1.5 sqmm, 3 core between cable loops box to street light fitting, cable should be tied with the pole using cable ties complete all as specified and directed.

Taking out the old one and S&F 40 mm light grade GI pipe Bracket for street light (not less than 1.5 mtr long) and two Nos of mild steel clamp & made out of 32 x 3 mm flat iron complete with bolts and nuts and suitable size washers complete all as specified and directed.

S&F in replacement of old unserviceable 30 W Solar Street Light ALL in ONE type with 120 lm/W , Mppt charge controller, LiFe Pol4 battery. With 1 year warranty on whole product complete all as specified and directed.

Supply and fix GI Pipe Light grade with all connected accessories of sizes 40 mm complete all as specified and directed.

Note (for Ser Item No. 1.00 to 48.00) :- (a) Contractor shall provide ladder for repairing of street light and hangar light fittings. (b) Contactor shall provide 1 electrician and 2 helper daily for Attending /repairing street light/ Hangar light fittings. (c) Non attending complaints after 8 hrs @ Rs-500.00/day shall be recovered from the contractor. (d) Rate quoted shall be inclusive for repairing hangar lights and street lights up to 11 Mtr height.

Maruti Abhiyantriki

Rama Electricals