PROVN OF KLP- FOR FD WKSP COY AT FARIDKOT MIL STN UNDER GE FARIDKOT

Amount

NOTE:- (Applicable for all parts/items/):- The bidders/contractors are advised to read tender document, all drawings & all corrigendum/ amendments and General conditions of contracts before entry/quoting the rates.

Lump sum price worked out by the tenderer for BUILDING WORKS as listed in Schedule ‘A’ Part-I(Ref pre-priced schedule attached separately)

Lump sum price worked out by the tenderer for INTERNAL ELECTRIFICATION WORKS as listed in Schedule ‘A’ Part-II(Ref pre-priced schedule attached separately)

Lump sum price worked out by the tenderer for INTERNAL WATER SUPPLY WORKS as listed in Schedule ‘A’ Part-III(Ref pre-priced schedule attached separately)

Lump sum price worked out by the tenderer for ROAD, PATH, CULVERT AND HARD STANDING WORKS as listed in Schedule ‘A’ Part-IV(Ref pre-priced schedule attached separately)

Lump sum price worked out by the tenderer for AREA DRAINAGE WORKS as listed in Schedule ‘A’ Part-V(Ref pre-priced schedule attached separately)

Lump sum price worked out by the tenderer for SEWAGE DISPOSAL WORKS as listed in Schedule ‘A’ Part-VI(Ref pre-priced schedule attached separately)

Lump sum price worked out by the tenderer for SECURITY WALL, FENCING AND GATE WORKS as listed in Schedule ‘A’ Part-VII(Ref pre-priced schedule attached separately)

Lump sum price worked out by the tenderer for EXTERNAL WATER SUPPLY WORKS as listed in Schedule ‘A’ Part-VIII(Ref pre-priced schedule attached separately)

Lump sum price worked out by the tenderer for EXTERNAL ELECTRIFICATION as listed in Schedule ‘A’ Part-IX(Ref pre-priced schedule attached separately)

Lump sum price worked out by the tenderer for HOT WATER SUPPLY, SUMMER APPLIANCES AND AIR CONDITIONING WORKS as listed in Schedule ‘A’ Part-X(Ref pre-priced schedule attached separately)

Lump sum price worked out by the tenderer for SITE CLEARANCE, EXCAVATION AND EARTH WORKS as listed in Schedule ‘A’ Part-XI(Ref pre-priced schedule attached separately)

Lump sum price worked out by the tenderer for DEMOLITION as listed in Schedule ‘A’ Part-XII(Ref pre-priced schedule attached separately)

Schedule 'A' Part-XIII(ARBORICULTURE)

Supply and stacking of good earth at site brought from outside MD land including royalty and carriage for all leads and lifts all as specified and directed by Engineer-in-Charge. Note :- For the purpose of payment the stack measurement shall be reduced by 20% for voids complete all as specified and directed

Supply and stacking of well decomposed Cow dung/ meegni manure including royalty, loading, unloading, transportation and stacking etc. at site. Note:- For the purpose of payment the stack measurement shall be reduced by 10% for voids.( 338 Cum for Lawns and 49 Cum for trees and shrubs)

Supply only liquid form chlorophyriphos 20 % EC conforming to IS: 8944 complete all as specified and directed.

Supply and stacking of Regent/ DCM agronil to improve the soil quality complete all as specified and directed.

Supply and stacking of gypsum 50 kg bag complete all as specified and directed.

PITS FOR TREES :Preparation of pit for trees by excavating in ordinary soft/ loose soil of size 60 cm X 60 cm X 60 cm deep, getting out, returning , filling in the same with the excavated earth (after removal of rubbish) mixed with manure in the ratio of 2:1 by volume (2 part of stacked volume of earth after reduction by 20% and 1 part of stacked volume of manure after reduction by 10%) flooding with water, dressing and removing surplus soil to a distance not exceeding 50 m including spreading & levelling complete all as specified and directed. Note- (i) Cost of manure, Pesticide or extra good earth if needed to be paid for separately.

Supplying & Planting of "Neem" trees as approved by GE of 2 to 3 feet height in 10" to 12" poly bag in pits (Holes) as prepared here-in -before and complete maintenance of trees during currency of contract including mortality replacement with same height of plant complete all as specified and directed

Supplying & Planting of "Drum Stick" trees as approved by GE of 2 to 3 feet height in 10" to 12" poly bag in pits (Holes) as prepared here-in -before and complete maintenance of trees during currency of contract including mortality replacement with same height of plant complete all as specified and directed

Supplying & Planting of "Mango" trees as approved by GE of 2 to 3 feet height in 10" to 12" poly bag in pits (Holes) as prepared here-in -before and complete maintenance of trees during currency of contract including mortality replacement with same height of plant complete all as specified and directed

Supplying & Planting of "Lemon" trees as approved by GE of 2 to 3 feet height in 10" to 12" poly bag in pits (Holes) as prepared here-in -before and complete maintenance of trees during currency of contract including mortality replacement with same height of plant complete all as specified and directed

Supplying & Planting of "Sheesham" trees as approved by GE of 2 to 3 feet height in 10" to 12" poly bag in pits (Holes) as prepared here-in -before and complete maintenance of trees during currency of contract including mortality replacement with same height of plant complete all as specified and directed

Supplying & Planting of "Amla" trees as approved by GE of 2 to 3 feet height in 10" to 12" poly bag in pits (Holes) as prepared here-in -before and complete maintenance of trees during currency of contract including mortality replacement with same height of plant complete all as specified and directed

Supplying & Planting of "Guava" trees as approved by GE of 2 to 3 feet height in 10" to 12" poly bag in pits (Holes) as prepared here-in -before and complete maintenance of trees during currency of contract including mortality replacement with same height of plant complete all as specified and directed

Supplying & Planting of "Pomegranate" trees as approved by GE of 2 to 3 feet height in 10" to 12" poly bag in pits (Holes) as prepared here-in -before and complete maintenance of trees during currency of contract including mortality replacement with same height of plant complete all as specified.

Supplying & Planting of "Bel" trees as approved by GE of 2 to 3 feet height in 10" to 12" poly bag in pits (Holes) as prepared here-in -before and complete maintenance of trees during currency of contract including mortality replacement with same height of plant complete all as specified and directed

Supplying & Planting of "Keenu" trees as approved by GE of 2 to 3 feet height in 10" to 12" poly bag in pits (Holes) as prepared here-in -before and complete maintenance of trees during currency of contract including mortality replacement with same height of plant complete all as specified and directed

Supplying & Planting of "Dek" trees as approved by GE of 2 to 3 feet height in 10" to 12" poly bag in pits (Holes) as prepared here-in -before and complete maintenance of trees during currency of contract including mortality replacement with same height of plant complete all as specified and directed.

Supplying & Planting of "Gulmohar" trees as approved by GE of 2 to 3 feet height in 10" to 12" poly bag in pits (Holes) as prepared here-in -before and complete maintenance of trees during currency of contract including mortality replacement with same height of plant complete all as specified and directed

Supplying & Planting of "Jamun" trees as approved by GE of 2 to 3 feet height in 10" to 12" poly bag in pits (Holes) as prepared here-in -before and complete maintenance of trees during currency of contract including mortality replacement with same height of plant complete all as specified and directed

Supplying & Planting of "Amaltas" trees as approved by GE of 2 to 3 feet height in 10" to 12" poly bag in pits (Holes) as prepared here-in -before and complete maintenance of trees during currency of contract including mortality replacement with same height of plant complete all as specified and directed

Supplying & Planting of "Pipal" trees as approved by GE of 2 to 3 feet height in 10" to 12" poly bag in pits (Holes) as prepared here-in -before and complete maintenance of trees during currency of contract including mortality replacement with same height of plant complete all as specified and directed

PITS FOR SHRUBS : Preparation of pit for shrubs by excavating in ordinary soft/ loose soil of size 30 cm X 30 cm X 45 cm deep, getting out, returning , filling in the same with the excavated earth (after removal of rubbish) mixed with manure in the ratio of 3:1 by volume (3 part of stacked volume of earth after reduction by 20% and 1 part of stacked volume of manure after reduction by 10%) flooding with water, dressing and removing surplus soil to a distance not exceeding 50 m including spreading & levelling complete all as specified and directed Note- (i) Cost of manure, Pesticide or extra good earth if needed to be paid for separately.

Supplying & Planting of "Ashoka Regional" shrubs as approved by GE of 1 to 1.50 feet height in poly bag in pits (Holes) as prepared here-in -before and complete maintenance of trees during currency of contract including mortality replacement with same height of plant complete all as specified and directed

Supplying & Planting of "Bougen Villa" shrubs as approved by GE of 1 to 1.50 feet height in poly bag in pits (Holes) as prepared here-in -before and complete maintenance of trees during currency of contract including mortality replacement with same height of plant complete all as specified and directed

Supplying & Planting of "Benjamin" shrubs as approved by GE of 1 to 1.50 feet height in poly bag in pits (Holes) as prepared here-in -before and complete maintenance of trees during currency of contract including mortality replacement with same height of plant complete all as specified and directed.

Supplying & Planting of "More Pankh" shrubs as approved by GE of 1 to 1.50 feet height in poly bag in pits (Holes) as prepared here-in -before and complete maintenance of trees during currency of contract including mortality replacement with same height of plant complete all as specified and directed

Supplying & Planting of "Hedge" shrubs as approved by GE of 1 to 1.50 feet height in poly bag in pits (Holes) as prepared here-in -before and complete maintenance of trees during currency of contract including mortality replacement with same height of plant complete all as specified and directed

TREE GUARDS :Supplying & fixing of tree guards 60 CM in plan and 1.5 meters high from ground level made of 30 mm X 30 mm X 3 mm angel iron frame and 30 mm X 3 mm flat iron welded wire mesh of size 32 mm X 32 mm X 3 mm and vertical angle with shoe shall be embedded in the round firmly tree guard as shown in drawing (Drawing No : CWE/SGNR/SD/158/15 Sheet-1/1 revised dated 13 Sep 2019) with number plate and writing name of tree complete all as specified and directed Note: Tree guard shall be painted two coat of synthetic enamel paint over of red oxide primer complete in all respect.

Schedule 'A' Part-XIV(EOT CRANE)

Design, manufacture, supply, erection, installation, testing & commissioning of double girder type of length approximately 45 metres, electric operated 2 Nos of cranes situated on two separate cross travel girders having working capacity of 2 Tons and 5 Tons, cross span of 11 meters, 7 meters lift, designing for the parameters as specified and complete with all accessories as specified and as directed. Note: (a) The crane shall be designed taking the combination of all parameters of both cranes. (b) Two separate cross travel and one long travel mechanism shall be considered. Note: (a) The scope of works shall be inclusive of designing and provisioning of long girders.

Design, manufacture, supply, erection, installation, testing & commissioning of double girder type of length approximately 45 metres, electric operated 2 Nos of cranes situated on two separate cross travel girders having working capacity of 2 Tons and 5 Tons, cross span of 18 meters, 7 meters lift, designing for the parameters as specified and complete with all accessories as specified and as directed. Note: (a) The crane shall be designed taking the combination of all parameters of both cranes. (b) Two separate cross travel and one long travel mechanism shall be considered. Note: (a) The scope of works shall be inclusive of designing and provisioning of long girders.

Schedule 'A' Part-XV(MISCELLANEOUS PARTS)

S & F factory made precast cover slab made of steel fibre reinforced concrete (SFRC), medium duty, 100 kN breaking load in any shape and size (square/ rectangular/circular), 75 mm thickness, minimum M30 grade of concrete, conforming to IS 12592: 2002 complete all as specified and as directed.

S & F class SN 8 structured wall polyethylene piping system (pipe with online coupler and elastomeric rubber ring) with hollow annular profiled outer surface and a smooth inner surface (double wall corrugated) for non-pressure underground drainage and Sewerage application, Type B, Nominal Size (DN/ID) 150, made of polyethylene (PE) material conforming to per IS 16098 (Part 2):2013 and to be transported, handled, installed and jointed as per Annex A of IS 16098 (Part 2):2013 complete all as specified and as directed.

S & F class SN 8 structured wall polyethylene piping system (pipe with online coupler and elastomeric rubber ring) with hollow annular profiled outer surface and a smooth inner surface (double wall corrugated) for non-pressure underground drainage and Sewerage application, Type B, Nominal Size (DN/ID) 200, made of polyethylene (PE) material conforming to per IS 16098 (Part 2):2013 and to be transported, handled, installed and jointed as per Annex A of IS 16098 (Part 2):2013 complete all as specified and as directed.

Dismantling of rolling shutter complete all as specified and as directed.

Taking down stop cock, bib tap, stop valve etc. complete all as specified and as directed.

M & L for forming embankments using earth brought from outside MD land including raising (or lowering) earth, spreading in layers not exceeding 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc., not exceeding 1.5 m high from base complete all as specified and as directed.

M & L for forming 12 mm thick expansion joints in 75 mm thick slab filled with pre-formed bituminous filler and top 30 mm primed and sealed with sealing compound, Grade ‘A’ complete all as specified and as directed.

M & L for earthing complete with galvanised steel plate earth electrode 600 mm X 600 mm X 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to earthing lead of 32 mm X 6 mm galvanised mild steel strip by means of bolts, nuts, check nuts and washers of galvanised iron from earth plate to test point upto 7.5 metre including all as shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete chamber in cement concrete M15 (Nominal Mix) using 20 mm nominal size coarse aggregate, precast RCC cover slab in cement concrete M15 (Nominal mix) using 20 mm nominal size coarse aggregate of size 40 cm X 40 cm X 5 cm reinforced with 8 mm dia TMT bars @ 150 mm c/c both ways with one handle for lifting made out of 8 mm dia bar, GI funnel, GI wire mesh filter, 20 mm dia GI pipe medium grade for watering, 40 mm dia GI pipe medium grade for protection of earthing lead, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil/ strata and testing complete all as specified and as directed.

M & L for earthing complete with galvanised steel plate earth electrode 600 mm X 600 mm X 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to earthing lead of 4.0 mm dia galvanised mild steel wire by means of bolts, nuts, check nuts and washers of galvanised iron from earth plate to test point upto 7.5 metre including all as shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete chamber in cement concrete M15 (Nominal Mix) using 20 mm nominal size coarse aggregate, precast RCC cover slab in cement concrete M15 (Nominal mix) using 20 mm nominal size coarse aggregate of size 40 cm X 40 cm X 5 cm reinforced with 8 mm dia TMT bars @ 150 mm c/c both ways with one handle for lifting made out of 8 mm dia bar, GI funnel, GI wire mesh filter, 20 mm dia GI pipe medium grade for watering, 20 mm dia GI pipe medium grade for protection of earthing lead, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil/ strata and testing complete all as specified and as directed.

Supply and erect factory made 7 meter long hot dip galvanized (as per relevant IS with average coating thickness 65 micron) octagonal poles conform to IS-2062/ BSEN 10025 with 155 mm dia at bottom and 70 mm dia at top A/F made up of 3 mm thick HT sheet along with foundation type base plate of size 250 mm X 250 mm X 16 mm, foundation bolt 4 Nos of M20 X 600 mm high 'J' type EN8 grade, including 1 meter long hot dip galvanized single arm (swan neck) bracket made up of 40 NB dia GI pipe and including excavation, earth work, PCC (1:2:4) type B1 for foundation and grouting the bolts as per manufacturer’s instructions including marking pole number in letters & figures of size not less than 10 cm height with red colour enamel paint complete all as specified and as directed. Note: - (i) Srl number will be issued by Engineer-in-Charge.

S & F hot pressed moulded SMC (sheet moulding compound) junction box of inside dimension 250 mm X 200 mm X 100 mm including 2 Nos aluminium stud terminal of suitable size and 1 No MCB SP 6 amp and fixed on pole with clamps, bolts and nuts complete all as specified and as directed.

Supplying, installing, testing and commissioning factory made, CPRI approved, outdoor type, floor mounting LT panel board of adequate size, made of cold rolled close annealed sheet of 3 mm thick with 50 mm X 50 mm X 6 mm angle iron frame works, powder coated, dust & vermin proof, front and rear openable, double doors, compartmentalized, Form 4b construction, conforming to IS/IEC 60947 : PART 1 : 2007, locking arrangements, suitable for 3 phase 4 wire 415 V, 50 Hz with 600 Amps rated aluminium busbar fully insulated with class F materials and nuts, bolts, washers for connection including wiring with single core PVC power cable of suitable size and including mounting on angle iron frame made using angle iron 50 mm X 50 mm X 6 mm complete all as specified and as directed. and shall be comprising the followings: - (A) 600 Amps rated aluminium busbar fully insulated with class F materials and nuts, bolts, washers for connection – 4 Nos (B) Wiring with single core PVC, copper power cable of suitable size (C) Incoming: (a) MCCB rated current (In): 400 A, Icu: 36 kA, Ics: 100% of Icu, Uimp: 8 kV, Ui: 690 V, IP40, adjustable thermal (80% to 100%) and adjustable magnetic (5-10 times) setting, four pole, for 415 V, 50 Hz AC supply: -1 No (D) Outgoing: (a) MCCB rated current (In): 250 A, Icu: 25 kA, Ics: 100% of Icu, Uimp: 8 kV, Ui: 690 V, IP40, adjustable thermal (80% to 100%) and adjustable magnetic (5-10 times) setting, four pole, for 415 V, 50 Hz AC supply: -1 No (b) MCCB rated current (In): 200 A, Icu: 25 kA, Ics: 100% of Icu, Uimp: 8 kV, Ui: 690 V, IP40, adjustable thermal (80% to 100%) and adjustable magnetic (5-10 times) setting, four pole, for 415 V, 50 Hz AC supply: -1 No

Supplying, installing, testing and commissioning factory made, CPRI approved, outdoor type, floor mounting LT panel board of adequate size, made of cold rolled close annealed sheet of 3 mm thick with 50 mm X 50 mm X 6 mm angle iron frame works, powder coated, dust & vermin proof, front and rear openable, double doors, compartmentalized, Form 4b construction, conforming to IS/IEC 60947 : PART 1 : 2007, locking arrangements, suitable for 3 phase 4 wire 415 V, 50 Hz with 400 Amps rated aluminium busbar fully insulated with class F materials and nuts, bolts, washers for connection including wiring with single core PVC power cable of suitable size and including mounting on angle iron frame made using angle iron 50 mm X 50 mm X 6 mm complete all as specified and as directed. and shall be comprising the followings: - (A) 400 Amps rated aluminium busbar fully insulated with class F materials and nuts, bolts, washers for connection – 4 Nos (B) Wiring with single core PVC, copper power cable of suitable size (C) Incoming: (a) MCCB rated current (In): 250 A, Icu: 36 kA, Ics: 100% of Icu, Uimp: 8 kV, Ui: 690 V, IP40, adjustable thermal (80% to 100%) and adjustable magnetic (5-10 times) setting, four pole, for 415 V, 50 Hz AC supply: -1 No (D) Outgoing: (a) MCCB rated current (In): 160 A, Icu: 36 kA, Ics: 100% of Icu, Uimp: 8 kV, Ui: 690 V, IP40, adjustable thermal (80% to 100%) and adjustable magnetic (5-10 times) setting, four pole, for 415 V, 50 Hz AC supply: -1 No (b) MCCB rated current (In): 40 A, Icu: 16 kA, Ics: 100% of Icu, Uimp: 8 kV, Ui: 690 V, IP40, adjustable thermal (80% to 100%) and adjustable magnetic (5-10 times) setting, four pole, for 415 V, 50 Hz AC supply: -3 Nos

Supplying, installing, testing and commissioning factory made, CPRI approved, outdoor type, floor mounting LT panel board of adequate size, made of cold rolled close annealed sheet of 3 mm thick with 50 mm X 50 mm X 6 mm angle iron frame works, powder coated, dust & vermin proof, front and rear openable, double doors, compartmentalized, Form 4b construction, conforming to IS/IEC 60947 : PART 1 : 2007, locking arrangements, suitable for 3 phase 4 wire 415 V, 50 Hz with 300 Amps rated aluminium busbar fully insulated with class F materials and nuts, bolts, washers for connection including wiring with single core PVC power cable of suitable size and including mounting on angle iron frame made using angle iron 50 mm X 50 mm X 6 mm complete all as specified and as directed. and shall be comprising the followings: - (A) 300 Amps rated aluminium busbar fully insulated with class F materials and nuts, bolts, washers for connection – 4 Nos (B) Wiring with single core PVC, copper power cable of suitable size (C) Incoming: (a) MCCB rated current (In): 200 A, Icu: 36 kA, Ics: 100% of Icu, Uimp: 8 kV, Ui: 690 V, IP40, adjustable thermal (80% to 100%) and adjustable magnetic (5-10 times) setting, four pole, for 415 V, 50 Hz AC supply: -1 No (D) Outgoing: (a) MCCB rated current (In): 100 A, Icu: 16 kA, Ics: 100% of Icu, Uimp: 8 kV, Ui: 690 V, IP40, adjustable thermal (80% to 100%) and adjustable magnetic (5-10 times) setting, four pole, for 415 V, 50 Hz AC supply: -2 Nos (b) MCCB rated current (In): 40 A, Icu: 16 kA, Ics: 100% of Icu, Uimp: 8 kV, Ui: 690 V, IP40, adjustable thermal (80% to 100%) and adjustable magnetic (5-10 times) setting, four pole, for 415 V, 50 Hz AC supply: -3 Nos

S & F two core flat, FR-LSH cables for outdoor use, PVC insulation of type C and having PVC sheath of type ST2, 2.5 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor for fittings complete all as specified and as directed.

M & L for auguring under road, pavement, hard standing, railway lines by trenchless technology using latest boring technique and necessary machine for insertion of GI/CI/PP-R/PVC pipe of any dia/ bore/size complete all as specified and as directed.

M & L for non-rising stem type sluice valves having double flanged for connections of nominal pressure (PN 1.0) as per IS 14846: 2000 of preferred materials, nominal size 100 mm including nuts, bolts, packing sheets etc. complete all as specified and as directed.

M & L for non-rising stem type sluice valves having double flanged for connections of nominal pressure (PN 1.0) as per IS 14846: 2000 of preferred materials, nominal size 80 mm including nuts, bolts, packing sheets etc. complete all as specified and as directed.

Supplying, laying, connecting, jointing and testing in trenches 100 mm nominal dia ductile iron pressure pipe for water mains, centrifugally cast, spigot and socket ends (for push on joints), class K7 in any length with external protection of Metallic zinc with finishing layer of bituminous paint and internal linings of Portland cement (with or without additives) mortar with seal coat, all as per IS 8329: 2000 and including materials and jointing with rubber gasket for WA type of application and hardness class 50 for bulb and hardness class 80 for heel all as per IS 5382: 2018 and IS 12820: 2004 complete all as specified and as directed.

Supplying, laying, connecting, jointing and testing in trenches 80 mm nominal dia ductile iron pressure pipe for water mains, centrifugally cast, spigot and socket ends (for push on joints), class K7 in any length with external protection of Metallic zinc with finishing layer of bituminous paint and internal linings of Portland cement (with or without additives) mortar with seal coat, all as per IS 8329: 2000 and including materials and jointing with rubber gasket for WA type of application and hardness class 50 for bulb and hardness class 80 for heel all as per IS 5382: 2018 and IS 12820: 2004 complete all as specified and as directed.

M & L for construction of new valve pit/chamber of size 1050 mm (Length) X 1050 mm (Breadth) X 1050 mm (depth) including necessary earth work in any type of soil, PCC foundation M7.5(Nominal Mix) using 40 mm nominal size graded crushed stone aggregate as in base concrete, brick work with sub class 'B' bricks, non-modular sizes as per IS 1077: 1992, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6, cement plaster 20 mm thick internally in two coats of (15 mm and 5 mm) in cement mortar 1:4, 3 mm thick mild steel sheet of any grade and designation as per IS 513: 2008 and IS 10748: 2004 welded with angle iron (40 mm X 40 mm X 6 mm) frame of structural steel, frame welded with angle iron (50 mm X 50 mm X 6 mm) frame of structural steel, welded to flat iron of size 150 mm X 50 mm X 6 mm of structural steel, fixed with bolt of 16 mm dia anchored with plate of size 100 mm X 100 mm X 3 mm of structural steel, bolt and anchored plate embedded in 250 mm thick PCC coping in M15(Nominal Mix) using 20 mm nominal size graded crushed stone aggregate, mild steel handle, grade E165 as per IS 15911: 2010 for structural steel with necessary, welding, riveting, bolting including painting exposed steel surfaces with two coats of bituminous paint and embedded surfaces of steel with two coats of tar, finishing exposed faces of concrete surfaces and plaster surfaces with three coats of white wash and all as per drawing No. BTD-811 Sheet Nos 1/2 and 2/2 of HQ CE Bathinda Zone complete all as specified and as directed.

M & L for construction of new valve pit/chamber of size 450 mm (Length) X 450 mm (Breadth) X 450 mm (depth) including necessary earth work in any type of soil, PCC foundation M7.5(Nominal Mix) using 40 mm nominal size graded crushed stone aggregate as in base concrete, brick work with sub class 'B' bricks, non-modular sizes as per IS 1077: 1992, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6, cement plaster 20 mm thick internally in two coats of (15 mm and 5 mm) in cement mortar 1:4, 3 mm thick mild steel sheet of any grade and designation as per IS 513: 2008 and IS 10748: 2004 welded with angle iron (40 mm X 40 mm X 6 mm) frame of structural steel, frame welded with angle iron (50 mm X 50 mm X 6 mm) frame of structural steel, welded to flat iron of size 150 mm X 50 mm X 6 mm of structural steel, fixed with bolt of 16 mm dia anchored with plate of size 100 mm X 100 mm X 3 mm of structural steel, bolt and anchored plate embedded in 250 mm thick PCC coping in M15(Nominal Mix) using 20 mm nominal size graded crushed stone aggregate, mild steel handle, grade E165 as per IS 15911: 2010 for structural steel with necessary, welding, riveting, bolting including painting exposed steel surfaces with two coats of bituminous paint and embedded surfaces of steel with two coats of tar, finishing exposed faces of concrete surfaces and plaster surfaces with three coats of white wash and all as per drawing No. BTD-811 Sheet Nos 1/2 and 2/2 of HQ CE Bathinda Zone complete all as specified and as directed.

Supplying, laying, connecting, jointing and testing in trenches ductile iron fittings (special castings) (class K12 as per IS 9523: 2000) for ductile iron pressure pipe for water mains upto 250 mm nominal dia (spigot and socket and flange ends (for push on joints and flanged joints) with external coatings of Metallic zinc with finishing layer of bituminous paint and internal linings of Portland cement (with or without additives) mortar with seal coat, all as per IS 9523: 2000 and including materials and jointing with rubber gasket for WA type of application and hardness class 50 for bulb and hardness class 80 for heel all as per IS 5382: 2018 and IS 12820: 2004 for push on joints and rubber gasket as per IS 638: 1979 for flanged joints complete all as specified and as directed.

S & F double door MCB Distribution board of sheet metal enclosure, single pole and neutral, 6 way with 200 Amps rated bus bar, 240 volt, IP42 protection grade and fixed with PVC plug and screws and grouted in wall with M15 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate complete all as specified and as directed.

S & F TPN distribution board 4 way vertical type double door made out of CRCA mild steel sheet surface with insulated material like polyester or with powder coating flush/surface mounting with copper busbar of suitable rating, with neutral bar and earth bar and cable tie for cable management, IP54 Protection and provision and including MCCB 4 pole upto 160 Amp,16KA as incomer and provision for MCBs as outgoing, dust and vermin proof complete as per IEC61439-3 complete all as specified and as directed. Note: MCBs for outgoing shall be measured and paid separately.

S & F modular blanking plate 1 module complete all as specified and as directed.

S & F LED bulb, System Wattage: 9 Watt, Rated Voltage: 230 Volt, Frequency: 50 Hertz, Operating Voltage Range: 170 to 270 Volt, System Current (mA): < 46, Power Factor: ≥ 0.98, System Lumen Efficacy (lumens/watt or lumens): 100, Total Harmonic Distortion (THD): ≤ 30 %, Color Rendering Index (CRI): ≥ 80, Driver Efficiency: ≥ 85 %, Ingress Protection: IP20, Correlated Color Temperature (CCT) (As per ANSI): 6500⁰ Kelvin, Mounting/Holder Type/Base cap: B22d, System Protections: Open & Short circuit protection, reverse polarity protection, surge protection of 2.5KV internal, Certification Standards: LM80, Conformity to Indian Standard: IS:16102 part I and Part II latest complete all as specified and as directed.

S & F LED bulb, System Wattage: 0.5 Watt, Rated Voltage: 230 Volt, Frequency: 50 Hertz, Operating Voltage Range: 170 to 270 Volt, System Current (mA): < 46, Power Factor: ≥ 0.98, System Lumen Efficacy (lumens/watt or lumens): 100, Total Harmonic Distortion (THD): ≤ 30 %, Color Rendering Index (CRI): ≥ 80, Driver Efficiency: ≥ 85 %, Ingress Protection: IP20, Correlated Color Temperature (CCT) (As per ANSI): 6500⁰ Kelvin, Mounting/Holder Type/Base cap: B22d, System Protections: Open & Short circuit protection, reverse polarity protection, surge protection of 2.5KV internal, Certification Standards: LM80, Conformity to Indian Standard: IS:16102 part I and Part II latest complete all as specified and as directed.

S & F including testing LED high bay 50 watt luminaire with aluminium die cast housing with mechanical mechanism for mounting, with driver complete suitable for fixation on wall/roof/railings with robust body, corrosion resistant, superior finish. The system wattage of fitting should not be more than 50 watt ± 10%, having surge protection of minimum 4kV internal, power factor more than 0.95, corelated colour temperature should 5700⁰-6500⁰ Kelvin, total hormonic distortion (THD) should not be more than 10%, lumen efficacy should not be less than 130 lumens per watt, total input voltage range 140-270V AC, colour rendering Index should not be less than 70, IP65 protection level complete all as specified and directed. Note: - (i) Cost of mechanical mountings and holders for lights, nut & bolts are inclusive in this item.

S & F including testing LED high bay 150 watt luminaire with aluminium die cast housing with mechanical mechanism for mounting, with driver complete suitable for fixation on wall/roof/railings with robust body, corrosion resistant, superior finish. The system wattage of fitting should not be more than 150 watt ± 10%, having surge protection of minimum 4kV internal, power factor more than 0.95, corelated colour temperature should 5700⁰-6500⁰ Kelvin, total hormonic distortion (THD) should not be more than 10%, lumen efficacy should not be less than 130 lumens per watt, total input voltage range 140-270V AC, colour rendering Index should not be less than 70, IP65 protection level complete all as specified and directed. Note: - (i) Cost of mechanical mountings and holders for lights, nut & bolts are inclusive in this item.

S & F telephone socket outlet complete all as specified and as directed.

S & F 1 pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/ recessed steel/ PVC conduit complete all as specified and as directed.

S & F television antenna socket outlet complete all as specified and as directed.

S & F co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit complete all as specified and as directed.

S & F 15 mm nominal size, nonrising spindle type fancy angle stop valves, two ways in double control with wall flange, made of cast brass including knob, knob components, divertor & components, nickel-chromium plated finish complete all as specified and as directed.

S & F single lever concealed divertor including bath spout and shower complete all as specified and as directed.

S & F central hole basin mixer with regular spout with popup waste system with braided boses as per catalogue No. SKU: QQT-CHR-7169B of Jaquar or equivalent of Make as mentioned under Appendix “B” of Particular Specifications complete all as specified and as directed.

S & F health faucet with jet spray, 1.5 metre long, cast copper alloy, nickel chromium plated finish, 15 mm bore, 100 mm long with 1.5 metre long stainless steel shower hose and mounting device attached to wall complete all as specified and as directed.

Supplying, installing, testing and commissioning automatic, servo controlled, indoor type, automatic voltage stabilizer of capacity 1 kVA, single phase, IP55 protection, copper wound, naturally air cooled type, insulation class H, designed for input voltage of 160 V to 270 V and output voltage of 230 V ± 1%, voltage correction rate of 15 V per second, metallic body with lifting hook duly power coated, LCD display for Input and Output Voltage, frequency, current, Time Delay and Mains ON with under and over voltage protection, short circuit protection, surge protection all as per IS 8448: 1989 complete all as specified and as directed.

Supplying, installing, testing and commissioning automatic, servo controlled, indoor type, automatic voltage stabilizer of capacity 5 kVA, single phase, IP55 protection, copper wound, naturally air cooled type, insulation class H, designed for input voltage of 160 V to 270 V and output voltage of 230 V ± 1%, voltage correction rate of 15 V per second, metallic body with lifting hook duly power coated, LCD display for Input and Output Voltage, frequency, current, Time Delay and Mains ON with under and over voltage protection, short circuit protection, surge protection all as per IS 8448: 1989 complete all as specified and as directed.

S & F evaporative air coolers (desert coolers) as per IS 3315: 2019, minimum air capacities 6000 cum per hour, sump tank capacity 120 litres, cooling efficiency not less than 65%, maximum power consumption 400 watts, plastic body, noise level not more than 65 dBA at 1 m distance complete all as specified and as directed.

Supplying, installing, testing and commissioning air cooled split unit air conditioner with indoor unit (IDU), outdoor unit (ODU) of capacity 2.0 TR, single phase, input voltage 170 to 270 V AC, 50 Hz, surface / concealed coper Refrigerant piping with insulation (EP Foam pipe section) up to 5 metre (IDU to ODU), copper power cable up to 4 metre, PVC Insulation, FR-LSH copper wire, complete with inverter, twin rotary compressor, cordless remote control unit and with inbuilt air ioniser and Plasma filter for better indoor air quality with BEE 5 star rating complete all as specified and as directed.

Supplying, installing, testing and commissioning refrigerator, electric driven (single phase), frost-free, double door, auto defrost to stop Ice built-up, automatic adjustment of speed in response to cooling demand, capacity upto 360 litres (nearest available). BEE 5 star rated complete with all accessories such as mounted trolley, complete all as specified and as directed.

Supplying, installing, testing and commissioning refrigerator, electric driven (single phase), frost-free, single door, auto defrost to stop Ice built-up, automatic adjustment of speed in response to cooling demand, capacity upto 195 litres (nearest available). BEE 5 star rated complete with all accessories such as mounted trolley, complete all as specified and as directed.

Supply, installation, testing & commissioning of double cylinder air compressor capacity 3 HP, 3 Phase, air displacement 250 LPM, compressor speed 925 rpm complete all as specified and as directed.

Supply, installation, testing & commissioning of 5 HP, 3 Phase, vehicle washing motor, compressor with all accessories complete all as specified and as directed.

Supplying, fixing, testing and commissioning of Horizontal Hydro-pneumatic system of material SS304, comprising of 2 Nos ( 1 working and 1 standby) electrical driven pump of capacity 1 LPS at 30 meter head (minimum 1.25 HP) with all accessories coupled to motor suitable for operation on 415 / 440 volts, three phase, 2900 RPM including with motor with 60 Liters of pressure vessel having 1 working and 1 standby option mounted on the same skid (base frame) along with control panel complete all as specified and as directed.

Supply and fix punched tape concertina coil made out of cold drawn unalloyed steel wires of dia 2.6 mm having minimum tensile strength of 1670 N per sqmm as per IS 4454 (Part- 1): 2001 with hot dip galvanized as per practice recommended in IS: 2629 and the coatings shall conform to heavily coated hard variety as per table I of IS: 4826 (weight of Zinc coating 230 gram per sqm minimum) and steel strip of size 19 mm X 0.5 mm with hardness of 137 to 187 VPN and zinc coating of 18 to 20 microns, minimum 610 mm dia of coil when closed, (9 kg ± 5 %) weight of coil with 50 turns & 129 Nos clips (without handles and spikes) and minimum 580 mm dia when opened upto 6 metres, stretched to 6 metres for 50 turns during installations complete all as specified and as directed.

S & F PVC-U, type A as per IS 13592: 2013, plain pipes, 110 mm dia, in any length as weep holes fixed to walls complete all as specified and as directed.

Supply, installing, commissioning and testing of washing machine with washer extractor of capacity 28 kg to 30 kg (dry weight per washing cycle) front loading electrically driven including water connection from PVC tank to washing machine as per requirement and drain out pipe from machine to drain complete all as specified and as directed and comprising of following specifications/ accessories/capacity/size and material shall be as per OEM/Manufacturer recommendations: - (i) Industrial washer extractor. (ii)Outer drum/ Inner basket/ outer basket made out of high grade stainless steel sheet of SS304 grade with perforation. (iii) Front loading and unloading open pocket. (iv) Forward and reverse basket rotation. (v) 01 No Heavy duty high spin single phase motor, variable frequency drive type of suitable capacity and 01 Nos driver motor three phase 415 volts variable frequency drive type of suitable capacity. (vi) Suspension with shock absorber and springs. (vii) Fully programmable microprocessor and auto balance while extraction. (viii) Manual dosage of powder detergent. (ix) Door limits electric inter locking and emergency stop for safety and trouble free and operation both manual and auto lock. (x) Aluminium casted pulley and belt. (xi) Main body of full stainless steel 304 grade. (xii) Heater of suitable KW. (xiii) PCC foundation as required shall be as per manufacturers recommendation NOTE: - (a) Contractor shall submit necessary company test certificate and purchase voucher and warranty cards as per recommendation by vender. (b) Testing and commissioning shall be carried out by authorized rep of the firm/company for which no extra payment shall be made.

Supply, installing, commissioning and testing of drying tumbler electrically heated suitable for washing machine as per above item having loading capacity of 28 KG to 30 KG per charge Fin type Electric Heater of 24 Kw made out of SS pipe, front loading type, Auto Timed, Auto reveres, Microprocessor controlled with electric motor and electric panel complete. Fully die pressed door, inner basket stainless steel basket of min 503 litre volume, outer body mild steel sheet insulated with glass wool complete all as specified and directed. Note: - (a) The Contractor shall submit necessary company test certificate and purchase voucher and warranty cards as per recommended by vender. (b) Testing and commissioning shall be carried out by authorized rep of the firm/ company for which no extra payment shall be made.

S & F in integrated type Heat Pump water heater with following components including installation testing and commissioning Outdoor Air cooled Integrated or split type Heat Pump with recirculation mode having minimum compressor capacity 3 HP, hermetically sealed with environment friendly refrigerant. At Rated heating Capacity, the heat pump must be able to deliver hot water at 65˚C (outlet temperature), at the rate not less than 120 litre per hour at minimum water inlet temperature of 4˚C and outlet temperature of 60˚C, and minimum 300 litre per hour in hybrid mode. At Rated heating Capacity, the heat pump must be able to deliver hot water at 65˚C (outlet temperature), at the rate not less than 120 litre per hour at minimum water inlet temperature of 4˚C and outlet temperature of 60˚C, and minimum 300 litre per hour in hybrid mode. The ratio of Rated output heating capacity to Rated Input Power should be such that COP of the machine is not less than 3.0 and must have Back-up heater power of not less than 12 kW and rated power input of not more than 2.5 kW. The heat pump shall have water storage tank of capacity (having internal glass lining) not less than 450 litre. NOTE: (a) Heat pump should have all the safety protections like high/low voltage, high temperature, refrigerant leak, compressor overheat protection with operational noise level not more than 60 dbA. (b) Heat pump should have a user friendly control panel to set the desired temperature with display of the actual temp also with flexibility of installing the same 15-30 m away from the heat pump.

NAND LAL PURI AND SONS PRIVATE LIMITED (BID ID -3258914)

Dasmesh Buildcon (BID ID -3258430)

A.V BUILDERS (BID ID -3258152)