(Mahapour Nidhi) Construction of Boundary Wall Work at Side of Medical College Ground Ward No.57 Zone No.13 File No.35/26X3/3.

15.6 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in charge. 15.6.2 In cement mortar

15.8 Demolishing stone masonry manually /by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50meters lead as per direction of Engineer-in-charge: 15.8.2 In cement mortar

Earth work in excavation for foundation, trenches for pipes /cables or drains etc. by mechanical means / manual means (exceeding 30cm in depth.) including ramming of bottom, dressing of sides, disposal of excavated earth including of all lift and lead upto 50m. Disposed earth to be levelled and neatly dressed. All kinds of soil

4.1 Providingand laying inpositioncement concreteof specifiedgrade excluding thecost of centeringandshutteringAllworkup toplinth level. 4.1.7 Cement concrete grade M-7.5 (Nominal Mix) with 4 0mm maximum size of stone aggregate

Random rubble masonry with hard stone in foundation and plinthwith Cement mortar 1:6 (1 cement : 6 coarse sand)

4.14 Providing and laying damp-proof course 50mm thick with cement Cement concrete grade M-15 (Nominal Mix) with 20mm maximum size of stone aggregate

Brick work with well burnt chimney bricks in bulls patent trench kiln manufactured by ghol process,crushing strength not less than 40kg /sqcm and water absorption not more than 15% in foundation and plinth. Cement mortar 1:6 (1 cement : 6 coarse sand

Steel work in built up M.S. tubular section (round, square or rectangular Hollow tube etc.) trusses/frame work etc./ railing work etc. including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete. Hot finished welded type tubes.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete:

12 mm cement plaster of mix : 1:6 (1 cement: 6 sand)

Providing and applying 1.0 mm thick white cement based wall putty of best quality, over plastered surface to prepare the surface even and smooth complete.

Finishing walls with water proofing cement paint of required shade New work (Two or more coats applied @ 3.84 kg/10 sqm).

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level: Cement concrete grade M-20 (Nominal Mix) with 20mm maximum size of stone aggregate.

Please Enable Macros to View BoQ information