WBPWDTE/EE/BED/NIQ_07/Q of 2025-26

Amount

Distribution wiring in 1.1 KV grade 3x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire partly in 20mm size PVC rigidconduit 'FR' (Precision make) [for ceiling portion only] and in19mm bore, 3mm thick polythene pipe [for horizontal &vertical run embedded in wall] to light / Fan / Call bell point as per GS withfollowing average run. 10 Mtr

Distn. wiring in 3 X 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 5A 3 pin plug point as per GS. On Board

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire of the following sizes in the 19mm dia 3 m thick polythene pipe as per GS. 3 x (1.5 sqmm)

2x(2.5 sqmm)+1x(1.5 sqmm)

2x (6 sqmm) + 1x (4 sqmm)

Supplying & Fixing sheet metal inspection box (16 SWG) of the following sizes(in mm ) flushed in wall including S&F bakelite/perpex top cover as per GS 175 x 100 x 65

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall as per GS. 2+12 Way[ Legrand/ L&T/ABB ]

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall as per GS.( Make - Legrand/ L&T/ABB) 4Way

Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall as per GS( Legrand/ L&T/ABB) 6Way ( Up to 160 A )

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection as perGS [Make-Legrand/ L&T/ABB ] 40 A DP

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connectionas per GS [Make-Legrand/ L&T/ABB ] 6-32 SP

Supplying and fixing 415 V Four Pole MCCB of Breaking capacity 25kA/35kA in existing Vertical DBs including necessary connection as per GS [Make-Legrand/ L&T/ABB ] . 160 A FP

Supplying and fixing 415V, TPN on load front operated Changeover switch with Sheet Steel enclosure on angle iron frame on wall with nuts bolts etc as per GS [Make-Legrand/ L&T/ABB ] ]. 160A

Supplying and fixing 415V, TPN SFU with sheet steel enclosure on angle iron frame on wall as per GS.[Make-Legrand/ L&T/ABB ] . 160A

Supply of 4/3.5 Core XLPE Insulated & Sheathed Armoured Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes [ Make RR Kabel/ Hasvells / Polycab or asper direction EIC. 2 Core 10 Sq. mm

4Core 25 Sq. mm

4 Core95 Sq. mm

Laying of cable after cutting floor/pavement/wall as per GS for the following Sizes. 2.5 to 35 Sq. mm

35 to 95 Sq. mm

Supplying and fixing compression type gland and finishing those for following XLPE / PVC armoured cable (2/4 / 3.5)Core as per GS. 2 Core 10 Sq. mm

4Core 25 Sq. mm

4Core 95 Sq. mm

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings as per GS 50mm dia

Supply & Fixing 240 V,2 nos 2 nos 6A, plug socket with separate 6 A Piano key type switch on sheet metal switch board embedded in wall as per GS

Supply & Fixing 240 V, 4 nos. 6A, plug socket with separate 4nos. 6 A Piano key type switch, indicator & 16A switch type SP MCB as per GS.

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch on sheet metal switch board embedded in wall as per GS

Fixing only single/twin fluorescent light fitting in the ceiling fixed with “L” type MS clamp as per GS

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit as per GS

Supply & Fixing angular batten holder (Anchor) on 75mm dia PVCround block / round bakelite on wall/ceiling as per GS

S&D Single tube light fitting (Make: Crompton, Cat. No.: IGP161LT8-16 1 x T8 with 2 nos LTT8-16 LED tube light or equivalent model no. of Philips/ Wipro/Magik) complete with all accessories on wall/ceiling incl.

S&D Double LED tube light fitting (Make: Crompton, Cat. No.: IGP162LT8-16 1 x T8 with 2 nos LTT8-16 LED tube light or equivalent model no. of Philips/Wipro/Magik) complete with all accessories on wall/ceiling incl.

S&F 10 watt LED Light (Make Philips/Crompton / Wipro)

Supplying & Fixing MS fan clam of two piece type to be fixed on 80 mm dia GI pipe with suitable clamp and nut, bolts washers as per direction of EIC

Supply & Fixing Socket type fan regulator (Step type)(Brand approved by EIC) on existing sheet metal switch board as per GS

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc as per GS

Supply and Fixing 12'' exhaust fan after making holes in wall including Supply & Fixing GI sheet (20SWG) metal Cowl with MS flat iron frame & GI wire mesh on wall as per GS (12")

Supply of ceiling fans complete with all accessories having the following Model / Cat No. ( Make -Crompton Greaves/Usha/Orient )

S & Erection of mini pole of size 6 ft. long approx 80 mm. dia seamless pipe Class - B , on the roof of the Bldg. By S& providing M.S. plate incl. Rose type arrangement near base plate for smooth cable entry position and making C.C. muffing of size 450 x 450 x 600 mm. hight with cement mortor mixture ( 6 : 3 : 1 ) incl. neet cement finish before cheaping properly the existing roof incl. S& providing earth bold after drilling holl etc. as per direction of E.I.C.

S&F cylindrical type pole head suitable for 80 mm. dia seamless pipe and should be waterproof & fabricated from steel member steel pipe. The cylindrical portion of the pole head which sleeve over the pole shall have a length of 40 cm. ( 18" ) approx. Incl. making 225 mm. dia ( 9" ) cable terminal box. The above terminal box welded with sleeve incl. S&F 1 No. 4 way bakelite terminal AC/DC make & 1 No. 15 Amp. fuse base & bridge inside the cylindrical portion of the header assembly as per direction of E.I.C.

S&F 50 mm. dia 1.5 mtr. long detachable type Single arm bracket, suitable for pole head. The arm bracket shall be properly welded with 15 mm. thick stifner plate of pole sleeve for strengthening incl. properly fixing arrangement with the pole by bolts, nuts and washer as per direction of EIC

Inter connection of LED light fittings by 2 x 1.5 Sq. mm. PVC insulated copper wire from pole loop box with best quality PVC pipes as per direction of EIC

Supply & Fixing of 240V, 90 Watt Fittings [ Cat No. CRP-411-90-57-HL2-GL-NSG]

Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint Upto 9.0 mtr. long pole 1st coat of aluminium paint over 1 coat of RO priming and 2nd coat of aluminium paint over 1st coat as per GS

Timer Panel:Supplying and fixing (2+12)way Legrand DB enclosure for housing the following A) One no.single dial digital timer (Legrand) B)One no. FP pole, conctractor 40 AMP,(LEGRAND) C) One no. FP 63A MCB (Legrand) D) One no. auto/manual Toggel Switch and other required material The complete arrangement must be wiring by PVC insulated Cu wire as per GS

SITC of Steel lettering acrylic signages made of 22 SWG stainless steel enclosed except the facia. The facia should be made of acrylic. provision should be as such that Inside each letterHeat sinkable LED lights will glow throughout the letter. S/F of 15'x6'x10" ACP sheet of 4mm thickness fixed on iron frame, on which the letters will be fixed. Installation of the above mention board by expert labour above the main gate makig arrangement for holding the board by 1.5" iron angle. Making scrapholding arrangement for fixing the board above the gate approx height 20 Ft .incl S&F 32 mm steel channel on complete edge . The letter will be fixed on the board by steel nut bolt etc. Additional arrangement to support the board by iron structure grouted on the gate slab and internal wiring connection as per direction of E.I.C

Excavation of soil for installation of Earth Electrode and filling & ramming as per GS For Morum Soil

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. Long With TATA-Medium GI pipe as per GS

Connecting the equipments to earth busbar including S & F Solid GI (Hot Dip) wire of size as below as per GS 4SWG

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall as per GS

M/S S. CHATTERJEE (BID ID -6497332)

DURGAPUR POWER (BID ID -6546556)

MODERN ELECTRIC (BID ID -6496632)