Package-X Combined pkg of 5 Nos of Augmentation Works and Balance portion of works pertaining to work of construction of 1 No of 110 KV Terminal Bay in Hassan Zone on PTK Basis

Karnataka Power Transmission Corporation Limited

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3726

Combined Package for, Work-A: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Karaya Sub station in Belthangady Taluka , Dakshina Kannada District Work-B: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Konaje Sub station in Ullala Taluka , Dakshina Kannada District Work-C: Providing additional 1X20 MVA , 110/33 kV Transformer and 33 kV bay at 110/33/11 kV Nittur Sub Station in Udupi Taluka & District Work-D: Creation of 33 kV Reference by providing 2X20 MVA , 110/33 kV Power Transformer along with 33 kV Terminal Bays at 110 kV Karkala Sub Station in Karakala Taluka , Udupi District Work E- Replacement of 2X10 MVA, 110/11 kV Power Transformers by 2X20 MVA 110/11 kV Power Transformer along with providing additional 11 kV Switchgear and replacement of indoor type old, retrofitted 11 kV switchgear by new 11 kV MCVCB outdoor Switchgear at 110 kV Halady Sub Station in Kundapura Taluka, Udupi District Work F- Balance portion of works pertaining to work of construction of 1 No of 110 KV Terminal Bay for the 110 kV Karaya Line at the existing 110/33/11 KV Sub Station at Puttur in Puttur Taluka, Dakishna Kannada District. on Partial Turnkey Basis, including Supply of all Materials/Equipments(Excluding supply of 11kV Switchgear) and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning

TECHNO - COMMERCIAL SHEETS

NOTE* For detailed scope of the work please refer Bid Documents.

BIDDERS TO READ CAREFULLY

THE FOLLOWING DOCUMENTS [DULY SIGNED BY AUTHORISED PERSON, WHEREVER NECESSARY] ARE TO BE UPLOADED AND BANK GUARANTEE/INSURANCE SURETY BOND TOWARDS EMD OVER AND ABOVE RS.1.00LAKH AS PER ANNEXURE-II OF THE BID DOCUMENT SHALL BE SENT IN ORIGINAL TO CGM(Tech), KPTCL, BENGALURU SO AS TO REACH THIS OFFICE AFTER THE LAST DATE OF SUBMISSION OF BID AND ON OR BEFORE THE DATE & TIME NOTIFIED FOR OPENING OF TECHNO COMMERCIAL BIDS, FAILING WHICH THE BID WILL NOT BE OPENED. 1) NO DEVIATION CERTIFICATE (SCHEDULE-16). 2) EMD/BID SECURITY AS DETAILED IN CLAUSE NO. 13 of ITT. 3) BANK GUARANTEE issued either by a Nationalized/Scheduled Bank OR INSURANCE SURETY BOND issued by Insurance Company authorized by Insurance Regulatory and Development Authority of India (IRDA) TOWARDS BALANCE EMD/BID SECURITY. (For the balance EMD above Rs. 1.00 Lakhs) (SCHEDULE-17) - as detailed in Clause No. 13 of ITT-The Bidder shall scan the Bank Guarantee/INSURANCE SURETY BOND towards EMD and upload the same in the prescribed format in the slot specified for “EMD and Tender Fee Payments” in the KPP portal to enable the owner for verification of EMD BG/ISB at the time of opening of Techno Commercial Bid, failing which the offer will be rejected. 4) LETTER OF UNDERTAKING (SCHEDULE-18). 5) CONSORTIUM AGREEMENT (IF APPLICABLE-SCHEDULE-19) 6) POWER OF ATTORNEY (SCHEDULE- 20). 7) ANY OTHER AGREEMENTS /UNDERTAKINGS/SELF DECLARATIONS SPECIFIED IN THE TENDER.

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

BID PROPOSAL SHEET

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3726

Combined Package for, Work-A: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Karaya Sub station in Belthangady Taluka , Dakshina Kannada District Work-B: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Konaje Sub station in Ullala Taluka , Dakshina Kannada District Work-C: Providing additional 1X20 MVA , 110/33 kV Transformer and 33 kV bay at 110/33/11 kV Nittur Sub Station in Udupi Taluka & District Work-D: Creation of 33 kV Reference by providing 2X20 MVA , 110/33 kV Power Transformer along with 33 kV Terminal Bays at 110 kV Karkala Sub Station in Karakala Taluka , Udupi District Work E- Replacement of 2X10 MVA, 110/11 kV Power Transformers by 2X20 MVA 110/11 kV Power Transformer along with providing additional 11 kV Switchgear and replacement of indoor type old, retrofitted 11 kV switchgear by new 11 kV MCVCB outdoor Switchgear at 110 kV Halady Sub Station in Kundapura Taluka, Udupi District Work F- Balance portion of works pertaining to work of construction of 1 No of 110 KV Terminal Bay for the 110 kV Karaya Line at the existing 110/33/11 KV Sub Station at Puttur in Puttur Taluka, Dakishna Kannada District. on Partial Turnkey Basis, including Supply of all Materials/Equipments(Excluding supply of 11kV Switchgear) and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning

Bidder's Name & Address alongwith GSTIN no. :

Bid Proposal Reference :

Person to be contacted :

E-Mail Address:

The Chief General Manager(Tech)

Corporate Office, KPTCL,

Indhana Bhavan, Bangalore - 560 009.

Combined Package for, Work-A: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Karaya Sub station in Belthangady Taluka , Dakshina Kannada District Work-B: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Konaje Sub station in Ullala Taluka , Dakshina Kannada District Work-C: Providing additional 1X20 MVA , 110/33 kV Transformer and 33 kV bay at 110/33/11 kV Nittur Sub Station in Udupi Taluka & District Work-D: Creation of 33 kV Reference by providing 2X20 MVA , 110/33 kV Power Transformer along with 33 kV Terminal Bays at 110 kV Karkala Sub Station in Karakala Taluka , Udupi District Work E- Replacement of 2X10 MVA, 110/11 kV Power Transformers by 2X20 MVA 110/11 kV Power Transformer along with providing additional 11 kV Switchgear and replacement of indoor type old, retrofitted 11 kV switchgear by new 11 kV MCVCB outdoor Switchgear at 110 kV Halady Sub Station in Kundapura Taluka, Udupi District Work F- Balance portion of works pertaining to work of construction of 1 No of 110 KV Terminal Bay for the 110 kV Karaya Line at the existing 110/33/11 KV Sub Station at Puttur in Puttur Taluka, Dakishna Kannada District. on Partial Turnkey Basis, including Supply of all Materials/Equipments(Excluding supply of 11kV Switchgear) and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning

a) * We have submitted bid as individual Bidder. (Indicate Name of the Individual Bidder)

b) * We have submitted bid in Consortium with the following Bidders. (Key in Consortium)

Name of the Consortium Partner Scope / Participation of each Consortium Partner

(* Fill-up whichever is applicable)

1 We, the undersigned Bidder, having read and examined in detail the specifications and all the Bidding documents of the said work and hereby propose to design, manufacture/fabricate, shop test, supply on FOR site basis, and carry out the erection, testing and commissioning including civil, structural and architectural works for

Combined Package for, Work-A: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Karaya Sub station in Belthangady Taluka , Dakshina Kannada District Work-B: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Konaje Sub station in Ullala Taluka , Dakshina Kannada District Work-C: Providing additional 1X20 MVA , 110/33 kV Transformer and 33 kV bay at 110/33/11 kV Nittur Sub Station in Udupi Taluka & District Work-D: Creation of 33 kV Reference by providing 2X20 MVA , 110/33 kV Power Transformer along with 33 kV Terminal Bays at 110 kV Karkala Sub Station in Karakala Taluka , Udupi District Work E- Replacement of 2X10 MVA, 110/11 kV Power Transformers by 2X20 MVA 110/11 kV Power Transformer along with providing additional 11 kV Switchgear and replacement of indoor type old, retrofitted 11 kV switchgear by new 11 kV MCVCB outdoor Switchgear at 110 kV Halady Sub Station in Kundapura Taluka, Udupi District Work F- Balance portion of works pertaining to work of construction of 1 No of 110 KV Terminal Bay for the 110 kV Karaya Line at the existing 110/33/11 KV Sub Station at Puttur in Puttur Taluka, Dakishna Kannada District. on Partial Turnkey Basis, including Supply of all Materials/Equipments(Excluding supply of 11kV Switchgear) and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning

2 PRICES AND VALIDITY :

2.1 We declare that the Prices stated in our Proposal are in accordance with subject Bid Documents (including Clause No.40 of "Conditions of Contract (CC)" & Clause No.12 of Instruction to Tenderers (ITT) of Bid Documents. We further declare that all Ex-works price/CIF components of Spares, Maintenance and Testing Equipments and other charges viz., Freight and Insurance, Type Test charges and other charges stated in our proposal shall be as per the Tender conditions. All the Price and other terms and conditions of this Proposal are valid during the Performance of the Contract.

2.2 All Duties, such as Custom Duties on imports, Levies, Surcharge/Cess etc., if any applicable on the transaction excluding GST are included in the Bid Price and shall be to Our account and the Owner is not having any liability whatsoever on this account, whatever may be the contrary elsewhere in the Bid documents. However the component of Duties included in the Bid Price are separately indicated in Schedule - 2 for TDS purpose. We further confirm that our Bid Prices as quoted in Schedule-I, include all import Duties and levies including Licence fees lawfully payable by us on imported items and all other Duties and Levies applicable on Bought-out Components, Materials, Equipment and other items and confirm that any such Duties and Levies additionally payable shall be to our account. We further confirm that, no Sales Tax in any form shall be payable by Owner either for Bought-out items which are despatched by our Sub-Suppliers directly to the Project Site or for items Supplied directly by us. We confirm that, the Prices quoted by us are excluding GST.

2.3 We declare that we have noted and considered Clause No.39 of Conditions of Contract (CC ), Clause No. 11.11 of Instruction to Tenderers(ITT) of Bid Documents regarding Taxes and Duties and quoted our Prices accordingly. We further agree for TDS as per Statutory stipulations.

2.4 The Bid Prices, the Price components of the various items in our Scope of Supply, Erection including Testing & Commisisoning, Civil and Mandatory spares is quoted in Itemwise Financial Bid in KPP Portal for this proposal..

3 CONSTRUCTION OF THE CONTRACT : We, declare that we are making the Offer on the basis of Single Contract for the entire Scope of the Package in accordance with Clause No.26.2 of Instruction to Tenderers (ITT) of Bid Document.

4 We having studied Clause No.39 of Conditions of Contract (CC ), Clause No. 11.11 of Instruction to Tenderers(ITT) of Bid Documents , relating to Tax and we hereby, declare that if any income-tax, surcharge on income tax or any other corporate tax is attracted under the law, we agree to pay the same.

5 Bid Security/ EMD : We have enclosed a Bid Security through e-Payment mode for a sum of Rs.1.00Lakhs and remaining amount of Rs47.09 Lakhs ( above Rs.1.00 Lakhs) in the form of Insurance Surety Bond (ISB) issued by Insurance Company authorized by Insurance Regulatory and Development Authority of India (IRDA) OR in the form of Bank Guarantee in original valid for a period of 225 days from last date of bid submission and liable to be forfeited in accordance with Bid Documents. (Mode of Payment towards EMD is as detailed in CLAUSE NO. 13 of ITT & Clause No. 5 of NIT)

We have also ensured that the above Bid Guarantee furnished by us is in line with the Bid Documents and complete in respect of following :

1. Value of Non judicial Stamp Paper purchased in the name of executing Bank is as per Stamp Act.

2. Power of Attorney Number and Date as well as Signature and Full Name and Designation of Executant along with Bank's Stamp are there.

3. Signature, Full Name, Designation and address of Witness are there.

4. Completed Mailing address of the Head Office of the Bank is indicated.

6.1 We declare that the Works shall be performed strictly in accordance with the Specifications and Documents except for the variations and Deviations, all of which have been detailed out exhaustively in the following Schedules, irrespective of whatever has been stated to the contrary anywhere else in our Proposal.

a Commercial Deviations Schedule Schedule - 5

b Technical Deviations Schedule Schedule - 6

6.2 We further confirm that Specified Stipulation of following Clauses are acceptable to us and No Deviation / Exceptions are taken on any account whatsoever in the following Clauses.

a. Terms of payment Clause No. 37 of Section-5,Conditions of Contract (CC) and Clause No.8 of Special Conditions of Contrac (SCC)

b. EMD/Bid Security Clause No. 6, Section :1, Invitation for Tenders (IFT) and Clause No. 13, Section :2, Instruction to Tenderer (ITT)

c. Contract Performance Guarantee Clause No. 29 of Section:2, Instruction to Tenderers (ITT).

d. Penalty for delay Clause No. 41 of Section-5 : Conditions of Contract (CC).

e. Price Basis/ Price adjustment Clause No. 40 of Section-5 :Conditions of Contract (CC).

f. Defects Liability Period/Guarantee Clause No. 10 of Section-5 Special Conditions of Contract (SCC)

g. Work Schedule Clause No.17 of Section:5 Conditions of Contract (CC)

h. Taxes and Duties Clause No. 11.11 of Section-2: Instruction to Tenderers (ITT).

Further, we agree that additional conditions, if any, found in the Proposal Documents other than those stated in Deviation Schedules, save that pertaining to any rebates offered, shall not be given effect to.

7 PERFORMANCE GUARANTEE ; We declare that the ratings and performance figures of the equipment to be supplied and erected by us are guaranteed. The Guaranteed particulas of different equiment in our Scope are enclosed in Data Requirement Sheets.

8 BID PRICING : We further, declare that the Prices stated in our Proposal are in accordance with your ITT & SCC & all other relevant clauses of Bid Documents.

9 PRICE ADJUSTMENT : We declare that the Prices quoted by us are in accordance Clause No. 40 of Section-5 :Conditions of Contract (CC)

10 SPECIAL TOOLS AND TACKLES : We have given a list of Special Tools and Tackles in Schedule - 7 and Prices thereof are included in our lumpsum Bid Price. We further agree that any items of Special Tools and Tackles, though not included in the aforesaid list, but required for effective Erection, Testing, Commissioning & Operation of the Equipments of Substations & Transmission lines shall also be furnished by us, at no extra cost to you.

11 ADDITIONAL INFORMATION : In addition to the information called for in these Proposal Sheets, we have included with this Proposal, additional information as listed in Schedule - 8. We further confirm that such additional information does not imply any additional deviation beyond those covered in Schedule - 5 & 6 and in case of any contraction between these additional information and other provisions of Bid, the later will prevail.

12 QUALIFICATION DATA : We confirm having submitted the Qualification Data, as required by you in your Bid Documents in e-Procurement Portal along with this Proposal. Further we have filled in the information for Qualification Requirements in Schedule 9. In case you require any further information in this regard, We agree to furnish the same in time.

13 WORK SCHEDULE : If this Proposal is accepted by you, we agree to submit Engineering Data, Provide Services and complete the entire Work from time to time, in accordance with Schedules indicated in the Proposal. We fully understand that the Time Schedule stipulated in this Proposal is the essence of the Contract, if awarded. The completion schedule of the various Major Key Phases of the Work is indicated in Schedule - 11.

14 CONTRACT PERFORMANCE GUARANTEE ; We further agree that if our Proposal is accepted, we shall provide an irrecoverable Contract Performance Guarantee, of value equivalent to Five percent (5%) of the Amount Put to Tender (Excluding GST) plus additional security for unbalanced tenders in accordance with Clause 29 of Instructions To Tenderers (ITT) of the tender valid up to the end of ninety (90) days after the end of the Contract Guarantee Period mandatorily in the form of Insurance Surety Bonds (ISBs) issued by Insurance Company authorized by Insurance Regulatory and Development Authority of India (IRDA) (OR) in the form of electronic Bank Guarantee (e-BG) from the Banks which are integrated with KPP Portal in the form attached as Annexure-III (Section 4: Formats of Annexures) in your favour in accordance with Clause 25.5 of ITT and Clause 43 of the CC (Conditions of Contract), as per the format given in Section 4 and enter into a formal agreement with you within Twenty (20) days from the date of issue of Letter of Intent to Award the Contract.

15 We, the partners of the Consortium whose Signatures are appended below, shall be liable jointly and severally for the execution of the Contract(s), in the event of Award, in accordance with the terms of Contract(s). The Lead Partner for this Bid - M/s .................................................................................... on behalf of the Consortium, is submitting the Bid. The Power of Attorney in favour of M/s .......................................................................................is enclosed.

16 BID PRICE : We declare that our lumpsum Price for the entire scope of work specified in the specifications and documents, shall be as indicated in Schedule - 1.

17 CHECK LIST : We have included a Checklist duly filled in Schedule 22

18 We, hereby, declare that only the Persons or Firms interested in this Proposal are named herein as Principals and that no other Persons are interested in the Proposal or in the Contract to be entered into, if we are awarded the Contract, and that this proposal is made without any connection with any other Person, Firm or Party likewise submitting a Proposal and that this Proposal is in all respect for and in good faith, without collusion or fraud.

19 We declare, in case our bid is accepted, that until a formal Contract is prepared & executed, this bid together with your written letter of acceptance thereof and your notification of award /Letter of Intent to Award the Contract shall constitute a binding contract between us. We further understand that you are not bound to accept the lowest or any bid you may receive.

Thanking you, we remain,

Yours faithfully,

Place Printed Name

Business Address Country of Incorporation (State or Province to be indicated)

Name and Address Principal Officer

Karnataka Power Transmission Corporation Limited

SHEET FOR TECHNO COMMERCIAL OPENING (Unpriced)

Combined Package for, Work-A: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Karaya Sub station in Belthangady Taluka , Dakshina Kannada District Work-B: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Konaje Sub station in Ullala Taluka , Dakshina Kannada District Work-C: Providing additional 1X20 MVA , 110/33 kV Transformer and 33 kV bay at 110/33/11 kV Nittur Sub Station in Udupi Taluka & District Work-D: Creation of 33 kV Reference by providing 2X20 MVA , 110/33 kV Power Transformer along with 33 kV Terminal Bays at 110 kV Karkala Sub Station in Karakala Taluka , Udupi District Work E- Replacement of 2X10 MVA, 110/11 kV Power Transformers by 2X20 MVA 110/11 kV Power Transformer along with providing additional 11 kV Switchgear and replacement of indoor type old, retrofitted 11 kV switchgear by new 11 kV MCVCB outdoor Switchgear at 110 kV Halady Sub Station in Kundapura Taluka, Udupi District Work F- Balance portion of works pertaining to work of construction of 1 No of 110 KV Terminal Bay for the 110 kV Karaya Line at the existing 110/33/11 KV Sub Station at Puttur in Puttur Taluka, Dakishna Kannada District. on Partial Turnkey Basis, including Supply of all Materials/Equipments(Excluding supply of 11kV Switchgear) and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3726

FILL ONLY IN LIGHT BLUE COLOURED CELLS.

Bidder's Name & Address alongwith GSTIN no. : To,

The Chief General Manager(Tech), Corporate Office, KPTCL, Indhana Bhavan, BANGALORE - 560009

We declare that in terms of Clause No. 11 of ITT, Bid documents, the following are our lumpsum price in Rupees for the entire scope of work as specified in the Specifications and Documents.( Inclusive of all Taxes (Excluding GST) & Duties).

Total Lumpsum Price : ( In Figures) Note: Fill as "YES" against this column in case Prices are indicated in the Item-Wise Percentage Wise Bid Financial Offer in figures

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 2 (1 of 2)-SUMMARY OF PRICE COMPONENTS

SHEET FOR TECHNO COMMERCIAL OPENING (Unpriced)

Combined Package for, Work-A: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Karaya Sub station in Belthangady Taluka , Dakshina Kannada District Work-B: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Konaje Sub station in Ullala Taluka , Dakshina Kannada District Work-C: Providing additional 1X20 MVA , 110/33 kV Transformer and 33 kV bay at 110/33/11 kV Nittur Sub Station in Udupi Taluka & District Work-D: Creation of 33 kV Reference by providing 2X20 MVA , 110/33 kV Power Transformer along with 33 kV Terminal Bays at 110 kV Karkala Sub Station in Karakala Taluka , Udupi District Work E- Replacement of 2X10 MVA, 110/11 kV Power Transformers by 2X20 MVA 110/11 kV Power Transformer along with providing additional 11 kV Switchgear and replacement of indoor type old, retrofitted 11 kV switchgear by new 11 kV MCVCB outdoor Switchgear at 110 kV Halady Sub Station in Kundapura Taluka, Udupi District Work F- Balance portion of works pertaining to work of construction of 1 No of 110 KV Terminal Bay for the 110 kV Karaya Line at the existing 110/33/11 KV Sub Station at Puttur in Puttur Taluka, Dakishna Kannada District. on Partial Turnkey Basis, including Supply of all Materials/Equipments(Excluding supply of 11kV Switchgear) and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3726

FILL ONLY IN LIGHT BLUE COLOURED CELLS.

Summary of Price Components

Bidder's Name & Address alongwith GSTIN no. : To,

The Chief General Manager(Tech), Corporate Office, KPTCL, Indhana Bhavan, BANGALORE - 560009

Summary price components for identified in accompanying specifications

( Name of the Work) as per the scope identified in accompanying specifications.

Sl no Description Amount in Rs. (Fill as "YES" against the above Price columns in case Prices are indicated in the Price templates)

A Material / Equipment Price (including Packing & Forwarding charges) in the Scope of the Contractor

i) Ex-works including all taxes & duties [As per schedules -

ii) Freight and Insurance Charges (Not Applicable) [As per schedules - 3A(i) for Station & 3B(i) for Line]

iii) Total FOR site price (i+ii)

B Mandatory spares price (including packing & forwarding charges)

i) Ex-works including all taxes & duties

ii) Freight and Insurance Charges(Not Applicable) (As per schedule -4)

iii)Total FOR site price (i + ii)

C Supply portion total FORD price [A+B]

D Erection portion:

i) Total charges for Erection, Testing & Commissioning of all Supply items [as per schedules-

ii) Total charges for entire civil works [ as per Schedules-

iii) Total civil works, erection, Testing and commisioning charges (i)+(ii)

E Total Bid Price = C+D(iii) In figures : Rs.

Total Bid Price in Figures : Rs.

Total Bid Price in words : Rupees

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 2 ( 2 of 2 ) - TAXES(Excluding GST), DUTIES & OTHER LEVIES

SHEET FOR TECHNO COMMERCIAL OPENING (Unpriced)

Combined Package for, Work-A: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Karaya Sub station in Belthangady Taluka , Dakshina Kannada District Work-B: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Konaje Sub station in Ullala Taluka , Dakshina Kannada District Work-C: Providing additional 1X20 MVA , 110/33 kV Transformer and 33 kV bay at 110/33/11 kV Nittur Sub Station in Udupi Taluka & District Work-D: Creation of 33 kV Reference by providing 2X20 MVA , 110/33 kV Power Transformer along with 33 kV Terminal Bays at 110 kV Karkala Sub Station in Karakala Taluka , Udupi District Work E- Replacement of 2X10 MVA, 110/11 kV Power Transformers by 2X20 MVA 110/11 kV Power Transformer along with providing additional 11 kV Switchgear and replacement of indoor type old, retrofitted 11 kV switchgear by new 11 kV MCVCB outdoor Switchgear at 110 kV Halady Sub Station in Kundapura Taluka, Udupi District Work F- Balance portion of works pertaining to work of construction of 1 No of 110 KV Terminal Bay for the 110 kV Karaya Line at the existing 110/33/11 KV Sub Station at Puttur in Puttur Taluka, Dakishna Kannada District. on Partial Turnkey Basis, including Supply of all Materials/Equipments(Excluding supply of 11kV Switchgear) and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3726

Fill IN LIGHT BLUE COLOURED CELLS.

Bidder's Name & Address alongwith GSTIN no. : To,

The Chief General Manager(Tech), Corporate Office, KPTCL, Indhana Bhavan, BANGALORE - 560009

Estimates of Indian Taxes (Excluding GST), Duties and Levies included in the Total Bid Price are as follows:

SL. No. Description of Applicable Tax (Excluding GST) / Duty / Levy

Rate of Tax (Excluding GST)/ Duty / Levy Amount of Taxes (Excluding GST) / Duties in Rupees Rate of Tax (Excluding GST) / Duty / Levy Amount of Taxes (Excluding GST)/ Duties in Rupees

1 SGST/UTGST Applicable taxes (Excluding GST), duties & levies prevailing as on the last date of bid submission shall be quoted

i. Supply Portion

ii. Erection Portion

iii. Civil Portion

i. Supply Portion

ii. Erection Portion

iii. Civil Portion

i. Supply Portion

ii. Erection Portion

iii. Civil Portion

6 Building and other construction workers welfare Cess for Supply, Erection and Civil Portion works

8 a. Applicable Customs Duty (*) (Bidders shall also clearly indicate the breakup of Customs duty such as BCD, Cess,etc.,)

b. If there is any existing Treaty between India and the country from where the goods required for this project are proposed to be imported, then copy of the treaty shall be uploaded.

9 Other Taxes & duties if any (Specify) **

10 Other Taxes & duties if any (Specify) **

11 Total (Sum of 1 to 10)

(*) In case of CIF portion of Supply.

** Please Specify the nature of the other Taxes (Excluding GST) along with the details in the "Rate" Column.

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 2A : SCHEDULE OF DISCOUNT

SHEET FOR TECHNOCOMMERCIAL OPENING (UN - PRICED)

Combined Package for, Work-A: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Karaya Sub station in Belthangady Taluka , Dakshina Kannada District Work-B: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Konaje Sub station in Ullala Taluka , Dakshina Kannada District Work-C: Providing additional 1X20 MVA , 110/33 kV Transformer and 33 kV bay at 110/33/11 kV Nittur Sub Station in Udupi Taluka & District Work-D: Creation of 33 kV Reference by providing 2X20 MVA , 110/33 kV Power Transformer along with 33 kV Terminal Bays at 110 kV Karkala Sub Station in Karakala Taluka , Udupi District Work E- Replacement of 2X10 MVA, 110/11 kV Power Transformers by 2X20 MVA 110/11 kV Power Transformer along with providing additional 11 kV Switchgear and replacement of indoor type old, retrofitted 11 kV switchgear by new 11 kV MCVCB outdoor Switchgear at 110 kV Halady Sub Station in Kundapura Taluka, Udupi District Work F- Balance portion of works pertaining to work of construction of 1 No of 110 KV Terminal Bay for the 110 kV Karaya Line at the existing 110/33/11 KV Sub Station at Puttur in Puttur Taluka, Dakishna Kannada District. on Partial Turnkey Basis, including Supply of all Materials/Equipments(Excluding supply of 11kV Switchgear) and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3726

FILL ONLY IN LIGHT BLUE COLOURED CELLS.

Bidder's Name & Address alongwith GSTIN no. : To,

The Chief General Manager(Tech), Corporate Office, KPTCL, Indhana Bhavan, BANGALORE - 560009

We hereby offer an unconditional discount on our quoted price in Schedule 2 (1 of2) as under. Any discounts offered anywere else in Bid shall not be considered.

Sl.No Nature of Discount

Percentage of discount Amount (in Rs.) (Fill in as 'YES' in case Prices are indicated in the Item-Wise Bid Financial Offer) Remarks

I Supply Schedules a) Ex-works prices

b) Freight & Insurance (Not Applicable)

II Erection Schedules

III Civil Works Schedules

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE- 2 B - STATEMENT OF COMMERCIAL TERMS AND CONDITIONS

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3726

Combined Package for, Work-A: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Karaya Sub station in Belthangady Taluka , Dakshina Kannada District Work-B: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Konaje Sub station in Ullala Taluka , Dakshina Kannada District Work-C: Providing additional 1X20 MVA , 110/33 kV Transformer and 33 kV bay at 110/33/11 kV Nittur Sub Station in Udupi Taluka & District Work-D: Creation of 33 kV Reference by providing 2X20 MVA , 110/33 kV Power Transformer along with 33 kV Terminal Bays at 110 kV Karkala Sub Station in Karakala Taluka , Udupi District Work E- Replacement of 2X10 MVA, 110/11 kV Power Transformers by 2X20 MVA 110/11 kV Power Transformer along with providing additional 11 kV Switchgear and replacement of indoor type old, retrofitted 11 kV switchgear by new 11 kV MCVCB outdoor Switchgear at 110 kV Halady Sub Station in Kundapura Taluka, Udupi District Work F- Balance portion of works pertaining to work of construction of 1 No of 110 KV Terminal Bay for the 110 kV Karaya Line at the existing 110/33/11 KV Sub Station at Puttur in Puttur Taluka, Dakishna Kannada District. on Partial Turnkey Basis, including Supply of all Materials/Equipments(Excluding supply of 11kV Switchgear) and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning

Details of payments made in the form of Credit card/Debit card/NEFT/RTGS/OTC (over the counter) as per the tender conditions should be keyed in against column no. 3 (a) . BG Amount, BG No. and date, Name and address of the bank issuing the BG, validity of the BG should be keyed in against column no. 3 (b) .

FILL ONLY IN LIGHT BLUE COLOURED CELLS.

Bidder's Name & Address alongwith GSTIN no. : To,

The Chief General Manager(Tech), Corporate Office, KPTCL, Indhana Bhavan, BANGALORE - 560009

STATEMENT OF COMMERCIAL TERMS AND CONDITIONS

Sl. No. Particulars Details

1 Bid proposal form Uploaded.

2 No deviation certificate Uploaded.

3. a). EMD / Bid Security Bids shall be accompanied by bid security (EMD); 1) Up to Rs.1.00Lakh The following modes of payment will be provided as a part of e-Payment services. • Credit Card/Debit Card • Net Banking • NEFT/RTGS • Over-the-Counter (OTC) • IMPS For further detail regarding mode of e-payment of EMD in e-procurement platform, contact e-procurement cell, Government of Karnataka.

b). EMD amount above Rs.1.00Lakh by Bank Guarantee/Insurance Surety Bond (ISB)

4 Validity of the Bid.

5 Qualifying Requirements.

6 Financial capability

8 Taxes & Duties.

9 Completion Schedule

10 Defects Liability Period/Guarantee

11 Payment Terms

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 3A(i) - Price Breakup for - Supply portion

SHEET FOR TECHNO COMMERCIAL OPENING (Unpriced)

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3726

Combined Package for, Work-A: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Karaya Sub station in Belthangady Taluka , Dakshina Kannada District Work-B: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Konaje Sub station in Ullala Taluka , Dakshina Kannada District Work-C: Providing additional 1X20 MVA , 110/33 kV Transformer and 33 kV bay at 110/33/11 kV Nittur Sub Station in Udupi Taluka & District Work-D: Creation of 33 kV Reference by providing 2X20 MVA , 110/33 kV Power Transformer along with 33 kV Terminal Bays at 110 kV Karkala Sub Station in Karakala Taluka , Udupi District Work E- Replacement of 2X10 MVA, 110/11 kV Power Transformers by 2X20 MVA 110/11 kV Power Transformer along with providing additional 11 kV Switchgear and replacement of indoor type old, retrofitted 11 kV switchgear by new 11 kV MCVCB outdoor Switchgear at 110 kV Halady Sub Station in Kundapura Taluka, Udupi District Work F- Balance portion of works pertaining to work of construction of 1 No of 110 KV Terminal Bay for the 110 kV Karaya Line at the existing 110/33/11 KV Sub Station at Puttur in Puttur Taluka, Dakishna Kannada District. on Partial Turnkey Basis, including Supply of all Materials/Equipments(Excluding supply of 11kV Switchgear) and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning

Bidder's Name & Address alongwith GSTIN no. :

The Chief General Manager(Tech), Corporate Office, KPTCL, Indhana Bhavan, BANGALORE - 560009

BIDDERS SHALL FILL ONLY IN THE LIGHT BLUE COLOURED CELLS.

SUPPLY PORTION: Unit Quantity (With ASL) TOTAL Indicate whether "Own manufactured Iem" or "Bought Out Item" Indicate country of Origin

Sl No. Name of the Equipment/Materials Work-A 110 kV Karaya Sub station 1X20 , 110/11 kV Trf Work-B 110 kV Konaje Sub station 1X20 , 110/11 kV Trf Work-C 110 kV Nittur Sub station 1X20 , 110/33 kV Trf Work-D 110 kV Karkala Sub station 2X20 , 110/33 kV Trf Work-E 110 kV Halady Sub station 2X20 , 110/11 kV Trf Work-F work of construction of 1 No of 110 KV Terminal Bay

SS1 POWER TRANSFORMER -Power Transformer 20 MVA, 110/33-11kV, Delta/Star, Dyn11, 3-Ph, 50Hz, Core Type, 2 Winding Delta/Star transformer, vector group DYn11 with OLTC ONAN/ONAF with fan control cubicle, RTCC Panel, Numerical RTCC panel, first filling of Oil and 10% spare oil in non-returnable drums etc., complete with Terminal connectors suitable for Single Drake/Moose ACSR on primary side of transformer and copper flat from neutral terminal to earthmat through NCT along with necessary support pin insulators as per technical(45 MT) Note: Copper Flats required for Power Transformers shall be supplied along with the Transformers as per Technical Specifications No 1.00 1.00 1.00 2.00 2.00 7.00

SS2 Nitrogen Injection fire extinguishing system: Supply,Erection, and including Civil Enginerring Works ,soak pit etc as per recommendation of the supplier of the lightining system for Power Transformer below 100 MVA. Set 1.00 1.00 1.00 2.00 2.00 7.00

SS3 CIRCUIT BREAKER : SF6 Gas circuit breaker with Semi-Pneumatic/Pneumatic operated/Spring type operating mechanism, including mounting Structures arrangements with rigid, bi-metallic terminal connectors complete suitable for Drake ACSR Conductor and mounting structures complete as per technical specifications. 145kV, 3150A, 40 kA Class (for 110/33kV Power Transformer) Nos 1.00 2.00 3.00

SS4 110 kV ,1250 A, 31.5 KA Class Nos 1.00 1.00

SS5 33kV, 800A, 25kA Class a) 33kV line Nos 1.00 4.00 5.00

SS6 b) 33kV side of 110/33kV Transformer Nos 1.00 2.00 3.00

SS7 ISOLATORS : Isolators including marshalling box and suitable terminal connectors, as required as per technical specification with solid core cylindrical post insulators complete set. A) 110KV, 1250A, 40KA Class Double Break Manually operated isolator with terminal connectors suitable for Moose ACSR /63 mm Al tube ( Work D)1) Upright mounting type with earth Switch (live point height 4600mm) Work D- Note - Terminal Connector for Isolators shall be as follows Rigid type suitable for Drake ACSR - 6 Nos,Flexible type suitable for 63 mm Al Pipe- 6 Nos Nos 0.00 2.00 0.00 2.00

SS8 110KV, 1250A, 40KA Class Double Break Manually operated isolator with terminal connectors suitable for Drake ACSR Upright mounting type with earth Switch (live point height 4600mm) Nos 1.00 1.00

SS9 Upright mounting type with out earth Switch (live point height 4600mm) ( suitable for a bay width of 8.2 m width )- Work C Set 1.00 0.00 1.00

SS10 Underhung type without earthswitch manually operated Isolator for Bus Sectionalizer, Set 1.00 1.00 130303

SS11 Upright mounting type with out earth Switch (live point height 6350mm) 1.00 1.00

SS12 33 KV, 800A, 25KA Class Double Break Manually operated isolator With terminal connectors suitable for DRAKE ACSR Upright mounting type with manually Operated Isolators Earth switch with Live point height 3750mm Nos 1.00 4.00 5.00

SS13 Upright mounting type without Earth switch (Live point height 3750mm) Nos 2.00 3.00 5.00

SS14 Upright mounting type without Earth switch with Live Point Height 4750 m Nos 3.00 8.00 11.00

SS15 C) 11 kV isolator 11kV isolator, double break 400 A, 25 KA capacity with rigid bi-metallic terminal connector suitable for Coyote ACSR for Capacitor Bank Set 2.00 6.00 8.00

SS16 CURRENT TRANSFORMER : Current transformer including Marshalling Box ,Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for Moose ACSR/Drake ACSR conductor, as per Technical Specicification. 110 kV class, 40 KA, CT of ratio 400-200-100/ 1-1-1A for Transformer Lines Core - 1 : Purpose- Dist/ Dif, Acc Class PS , Vk 1100 V at 600 A, Rct 4 Ohm at 400/1 A Core- 2 : Purpose Metering , Acc Class 0.2 s, Burden 10 VA Core - 3 : Purpose Backup, Acc Class 5P20, Burden 30 VA Nos 0.00 3.00 3.00

SS17 110 kV class, 40 KA, CT of ratio 200-100/ 1-1-1A for Transformer Core - 1 : Purpose- Dist/ Dif, Acc Class PS , Vk 400 V at 200 A, Rct 2 Ohm at 200/1 A Core- 2 : Purpose Metering , Acc Class 0.2 s, Burden 10 VA Core - 3 : Purpose Backup, Acc Class 5P20, Burden 30 VA Nos 3.00 6.00 9.00

SS18 33 kV class, 25 KA, CT of ratio 400-200/ 1-1-1A for Tr .Line Core - 1 : Vk-240 V, Rct 5 ohm at 400/1A, Accuracy class PS-Dist/Dif Core- 2 : 10 VA, Accuracy class 0.2s- Metering Core - 3 : 30 VA, Accuracy class 5P20-Back up Nos 3.00 12.00 15.00

SS19 33 kV class, 25 KA, CT of ratio 200-100/ 1-1-1A for Tranf Core - 1 : Vk-240 V, Rct 5 ohm at 400/1A, Accuracy class PS-Dist/Dif Core- 2 : 10 VA, Accuracy class 0.2s- Metering Core - 3 : 30 VA, Accuracy class 5P20-Back up Nos 3.00 3.00

SS20 33 kV class, 25 KA, CT of ratio 400-200/ 1-1-1A for Tranfrs Core-1 Core - 1 : Vk-240 V, Rct 5 ohm at 400/1A, Accuracy class PS-Dist/Dif Core- 2 : 10 VA, Accuracy class 0.2s- Metering Core - 3 : 30 VA, Accuracy class 5P20-Back up No 6.00 6.00

SS21 33 kV Class, 31.5 kA, NCT of ratio 400-200/1-1-1A for REFR Protection (of similar rating and ratio as that of Incomer of 33 kV CT at 33 kV side of trfr) with terminal connector suitable for 2 Nos. of Copper flats as per specifications Note : 1. All the Current Transformers in each kV class shall be of one and the same make for interchnageability and reliability of performance No 1.00 2.00 3.00

SS22 VOLTAGE TRANSFORMER : Voltage Transformer 110 kV , Single Phase , Oil filled outdoor type including Marshalling KIOSK with rigid bimetalic terminal conncetor suitable for Moose ACSR as per techinical specifciation Voltage Transformer 33 kV , Single phase, oil filled outdoor type including Marshalling KIOSK with rigid bimetallic terminal connectors suitable for Drake ACSR as per technical specifications. 33 kV Class, 33 kV/ √3/110 V/√3-110 V/√3-110 V/√3 Core - 1 : 300 VA, Accuracy class 0.2 - Protection Core - 2 : 200 VA, Accuracy class 3P - Metering Core - 3 : 50 VA, Accuracy class 3P - Open delta No 3.00 6.00 9.00

SS23 SURGE ARRESTOR : (Procelain/Polymer) metal oxide, gapless type with rigid bimetallic terminal connectors suitable for Drake ACSR as per technical specifications. 96 kV, 10 KA, SM type-For Transformers 96 kV, 10 KA, Class-II No 3.00 3.00 6.00 3.00 15.00

SS24 30 kV, 10 KA, class - III, For Transformers No 3.00 6.00 9.00

SS25 30 kV, 10 KA, class - II, -For OH line No 3.00 12.00 15.00

SS27 11kV ODS and take off structure Supplying of Double Pole strucuture with 9.5 mters RCC Poles 300kg WL suitable for mounting 11kV 400A roaster isolator with provision for fixing 9kV, 10kA Lightning Arrestors complete set with wiring materials. Set 2.00 6.00 8.00

SS28 Supplying and erection of DP Structure with 9.5 mtr RCC poles ,110 kv 400 A Double Break Isolators , 9 kV , 10 KA Surge Arrestor ( 3 Nos ) , H Frame along with DOLO /HG fuse unit , LT Protection kit /LTD Box , LT Trivector meter complete set with all accesories for auxilliary transformer Set 1.00 1.00

SS29 Control and Relay Panel Complete -SCADA Compatible per specifications: Simplex type control and relay panels complete as per specifications. 1) For Power Transformer 110/33 kV No. 1.00 2.00 3.00

SS30 2) For Power Transformer 110/11kV No. 2.00 2.00

SS31 3) For 33 kV Transmission line Note: 1. All the C&R Panels and associated panels shall be of one and the same make for uniformily and interchangeability of Components. 2. The accuracy class of metering core of CTs and VTs and ETV meter of C&R Panels shall be 0.2s accuracy class irrespective of what has been indicated else where in the bid document. 3. The electronic tri-vector meter with ABT & TOD features, DLMS protocol energy meter has to be provided. No. 1.00 4.00 5.00

SS32 Numericial distance Relay for 110 KV Sysytem comptabile to IEC 61850 communication protocol Nos 1.00 1.00

SS33 Master trip relay Nos 1.00 1.00

SS34 Station structure and GI Mounting Structure : Note 1) Weight of Station Structure and GI Mounting Structure shall be as mentioned in prevailing SR A). 110 kV Side Station Structure fabricated out of galvanised mild steel including Bolts and Nuts 110kV Station Structure Tower - 1T1 with peak (1.054t per tower) (0.986t per tower for structure+ 0.068 t per tower for Bolt &Nuts) No/t 2/2.108 3/3.162 5/5.2700

SS35 Station Beam type (1B1) (0.553t per tower) (0.521t per tower for structure+ 0.032 t per tower for Bolt &Nuts) Work C- suitable for 8.2 m bay width No/t 1/0.553 2/1.106 1/0.553 04/2.2120

SS36 Station Beam Type -1B1 suitable for fixisng 110 kV Class Underhung type Isolator without earthswitch for Bus Sectionalizer No/t 1/0.553 01/0.5530

SS37 33 kV Side Station Structure fabricated out of Galvanised mild steel including Bolts and Nuts 33kV Station Structure Tower - 3T1 with peak (0.599t per tower) (0.57t per tower for structure+ 0.0285t per tower for Bolt &Nuts) No/t 05/2.993 09/5.387 14/8.379

SS38 33kV Station Beams - 3B1 suitable for 6m Bay Width (0.242t per tower) (0.23t per tower for structure+ 0.0115t per tower for Bolt &Nuts) No/t 3/0.725 06/1.449 09/2.1735

SS39 Street Lighting lattice type Structure along with GI Pipe for fixing LED Lamp (0.182t per tower for structure +0.0091t per structure for Bolts & Nuts) No/t 6/1.147 6/1.147 2/0.3822 1/0.191 15/2.8665

SS40 GI Mounting Structure 110kV Isolator Live point height 4600 mm (0.752 t per Structure)(0.726 t per tower for structure+ 0.026 t per tower including Bolt &Nuts) No/t 1/0.752 2/1.504 1/0.752 04/3.0080

SS41 110kV Isolator Live point height 6350 mm (0.982 t per Structure)( 0.955 t per tower for structure+ 0.027 t per tower including Bolt &Nuts) No/t 1/0.982 01/0.982

SS42 110kV Current transformer (0.158t per Structure) (0.146 t per tower for structure+ 0.012 t per tower for Bolt & Nuts) No/t 03/0.474 08/1.264 11/1.738

SS43 96kV Lightening Arrestors. (0.116t per Structure) (0.105 t per tower for structure+ 0.011 t per tower for Bolt & Nuts) No/t 03/0.348 03/0.348 06/0.696 12/1.3920

SS44 11 kV NCT (0.157 t Per Structure) ( 0.146 t per tower for structure+0.011 t per tower for Bolts n Nuts) No/t 01/0.157 01/0.157

SS45 110kV Pedestal Insulators for Bus(0.14t per Structure) (0.127 t per tower for structure+ 0.013 t per tower for Bolt &Nuts) No/t 03/0.423 06/0.840 09/1.260

SS46 For High pedestal insulators ( for Trf ---- Work C) (0.150 t per tower) (0.134 t per tower for structure+ 0.016 t per tower for Bolt &Nuts) No/t 03/0.450 06/0.900 09/1.350

SS47 110 kV T Type rigid Bus support structure LPH 6350 mm (0.635 MT per Structure ) ( 0.603 t per tower for structure+ 0.032 t per tower for Bolt &Nuts) No/t 2/1.27 04/2.540 06/3.8100

SS48 33kV Isolator (LPH 3750 mm ) (0.257 t per Structure) (0.25 t per tower for structure+ 0.007t per tower for Bolt & Nuts) No/t 03/0.771 07/1.799 10/2.570

SS49 33kV Isolator (LPH 4750 mm ) (0.257 t per Structure) (0.25 t per tower for structure+ 0.007 t per tower for Bolt & Nuts) No/t 03/0.771 08/2.056 11/2.8270

SS50 33kV Current Transformer and 33kV NCT (0.157 t per Structure) (0.146t per tower for structure+ 0.011t per tower for Bolt & Nuts) No/t 7/1.099 18/2.826 25/3.925

SS51 33kV Potential Transformer (0.093 t per Structure) (0.08885t per tower for structure+ 0.004t per tower for Bolt & Nuts) No/t 03/0.279 06/0.558 09/0.8357

SS52 33kV Lightening Arrestors (0.087 t per Structure) (0.082t per tower for structure+ 0.005t per tower for Bolt & Nuts) No/t 06/0.522 12/1.044 18/1.5660

SS53 33kV PI for Bus (0.087 t per Structure) (0.082t per tower for structure+ 0.005t per tower for Bolt & Nuts) No/t 16/1.392 17/1.479 33/2.8710

SS54 11kV Cable Terminating Structure for LV side of Transformer (0.072 t per Structure) (0.069t per tower for structure+ 0.003t per tower for Bolt & Nuts) No/t 1/0.072 1/0.072

SS55 11kV GOS/Cable Terminating Structure for 11 kV Capacitor Bank (0.158 t per Structure) (0.146t per tower for structure+ 0.012t per tower for Bolt & Nuts) No/t 02/0.316 02/0.316

SS56 Total Weight of Station Structures and Mounting Structures fabricated out of galvanized mild steel (excluding Bolts & nuts) as per Technical Specification t 0.000 0.530 15.707 28.119 0.656 2.384 47.396

SS57 Total Weight of supply of Bolts & nuts of Station Structures and Mounting Structures as per Technical Specification. t 0.000 0.047 0.919 1.636 0.422 0.094 3.118

SS58 BUS BAR FORMATION : Moose ACSR for equipment connection -110 kV Side Mtr 70.00 150.00 220.00

SS59 Drake ACSR (33 kv Side WORK C, WORK D) Mtr 50.00 170.00 350.00 210.00 75.00 855.00

SS60 Coyote ACSR ( For Work E- 11 kV DPs) Mtr 20.00 210.00 230.00

SS61 7/3.15mm Ground Wire Mtr 120.00 120.00

SS62 Interconnection of 33 kV Bus for Transformer -1 and proposed Transformer -using 33 kV UG Cable etc as per site requirement (2 runs) 33 kV 3 core XLPE UG Cable -400 sq mm Mtr 220.00 220.00

SS63 Heat Shrinkable outdoor type Cable Termination kit for 33 kV Core XLPE Cable Nos 4.00 4.00

SS64 RIGID BUS With TAP & CLAMPS Aluminum pipe conforming to 6340 WP of IS-5082/1969 (BS1600-Sch 40 ) of following nominal diameter a) 75 mm ----110 kv Main Bus Mtr 30.00 84.00 114.00

SS65 63 mm size connecting Isolators to vertical tap ---110 kv side Mtr 18.00 30.00 28.00 76.00

SS67 38 mm size connecting isolator to vertical tap---33 kv side Mtr 36.00 90.00 126.00

SS68 TAPS- Inverted V Tap made of 63 mm Aluminium tube of 2500 mm for vertical portion and cross bus with rounded off end Nos 3.00 3.00

SS69 Straight taps suitable for 63mm Aluminium tube (BS-1600) of 1750mm vertical height fro vertical portion & cross bus on 110kV side with rounded off end. Nos 3.00 6.00 9.00

SS70 Straight /Angular taps suitable for 38 mm Aluminium tube (BS-1600) for connecting rigid main bus to 38 mm AL. Pipe (33 kV side ) Nos 6.00 12.00 18.00

SS71 Expansion type terminal Connector suitable for 63 mm Aluminium pipe , 63 mm nominal diameter X73.03 mm Nos 3.00 3.00

SS72 Post insulator clamps suitable for 75 mm Aluminium pipe & Post insulator solid core type - 110 KV side Rigid Type Nos 3.00 3.00 6.00

SS73 Expansion Type Nos 0.00 3.00 3.00

SS74 Sliding Type Nos 3.00 6.00 9.00

SS75 Post insulator clamps suitable for 63 mm Aluminium pipe & Post insulator solid core type - 110 KV side Rigid Type Nos 3.00 6.00 9.00

SS76 Post insulator clamps suitable for 50 mm Aluminium pipe & Post insulator solid core type - 33kV side Rigid Type Nos 3.00 6.00 9.00

SS77 Expansion Type Nos 0.00 3.00 3.00

SS78 Sliding Type Nos 6.00 8.00 14.00

SS79 Corona Bell Suitable for Aluminium Pipe of size 75mm on 110kV side. Nos 6.00 6.00 12.00

SS80 End Cap for Al tube of size 63 mm on 110 kV Nos 3.00 6.00 9.00

SS81 Terminal Connector suitable for 75 mm Al Tube to Moose/Drake Connector Nos 3.00 3.00

SS82 Corona Bell Suitable for Aluminium Pipe of size 50mm on 33kV side. Nos 6.00 6.00 12.00

SS83 End Cap for 38 mm Aluminium -33 kv Side Nos 6.00 6.00

SS84 INSULATORS: a) Post Insulators Cylindrical Solid core as per IS5350, Part II & III i)110kV 1unit/stack Nos 9.00 24.00 33.00

SS85 ii) 33kV 1unit/stack Nos 16.00 17.00 33.00

SS86 DISC INSULATORS WITH HARDWARES : Single Tension string using 3 units of each 11kV, 90 KN Disc Insulator along with Bolted type Tension Clamp and hardware suitable for Drake ACSR. ( 33kV side) Nos 6.00 6.00

SS87 Single Suspension string using 9 units of each 11kV, 90 KN Disc Insulator along with Suspension Clamp and hardware suitable for Moose ACSR/Drake ACSR. ( 110kV side) Nos 3.00 3.00 6.00

SS88 Single Suspension string using 8 units of each 11kV, 90 KN Disc Insulator along with Suspension Clamp and hardware suitable for Moose ACSR. ( 110kV side) Nos 3.00 3.00

SS89 Single Suspension string using 3 units of each 11kV, 90 KN Disc Insulator along with Suspension Clamp and hardware suitable for Drake ACSR. ( 33kV side) Nos 3.00 6.00 9.00

SS90 INSULATOR HARDWARE & CLAMPS as per technical specification: a) Post insulator clamp suitable for Single Drake ACSR and 110kV Solid core insulator Nos. 3.00 7.00 10.00

SS91 b) Post insulator clamp suitable for Moose ACSR and 110kV Solid core insulator Note - The rate of Post Insulator Clamps for Twin Moose ACSR Conductor is considered Nos 6.00 6.00

SS92 C Type wedge connector suitable for Moose -Drake Panther /Lynx (Line) Nos 0.00 3.00 3.00

SS93 C Type wedge connector suitable for Drake -Drake ( 33 kv Side- Work C) Nos 15.00 18.00 33.00

SS94 C Type wedge connector suitable for Drake -Coyote ( 33 kv Side) Nos 24.00 24.00

SS95 C type wedge connector suitable for Drake - Al . Tube of size 38mm on 33kV side Nos 7.00 7.00

SS96 LTAC Panel (indoor) : 415V, as per Technical specification comprising of Volt Meter, Ammester & 1 No. ETV meter. 1No. I/C MCCB 200A + 2Nos. 3 phase, 63A OG SFU + 2Nos. 3 phase, 32A OG SFU + 6Nos. 3 phase, 16A SFU etc., complete. Nos 1.00 1.00

SS97 AC Distribution Box (outdoor): AC Distribution box (outdoor) Single front type with 6 terminals 1200 x 1350 x 300 mm one I/C of 100 A MCCB 20KA+ 6 O/G 16 A MCB +1 O/G of 100 A HRC Fuse panel 415 V outdoor type No 1.00 1.00 2.00

SS98 LT Power armoured UG cable as per specification: 1.1KV PVC Insulated 95 sqmm. Aluminium cable 4 Core with glands/lugs/ferrules Mtr 0.00 0.00 103.00 103.00

SS99 1.1kV class 4X25 sq mm Copper Cable with glands /lugs/ferrules Mtr 30.00 150.00 180.00

SS100 1.1kV class 4X10 sq mm Copper Cable with glands /lugs/ferrules Mtr 40.00 100.00 140.00

SS101 LT DC Distribution Panel (Indoor) : as per Technical Specification comprising of Earth fault indicator ,indictaion circuit for AC Main failure , 1 No of 100 A SFU for IC+12 Nos , 32 A SFU for OG etc , complete Nos 1.00 1.00

SS102 LT Protection kit for auxilliary transformer No 1.00 1.00

SS103 11 kV Switchgear a 11 kV MCVCB , 500 MVA ,25 kA, 1250 Feeder Panel (SCADA Compatible) Note : The Switchgear will be supplied by KPTCL and the Bidder has to quote for complete scope of erection of Switchgear including moving the Switchgear from the point of unloading to the point of erection, erection of the complete Switchgear, wiring of Switchgear, testing & commissioning etc., complete Nos(KPTCL Supply) 0.00

SS104 11 kV 25 kA Metal clad VCB Switchgear (1600 Afor incomer & 1250 A for feeders outdoor type , each comprising of 2 I/C +12 F+2CB+1BC+1AP(remote annunciation cum Control Panel ) with CTs and PTs etc complete as per technical specification. Note :1. Simplex type Annuciator panel shall be provided for switchgear (consisiting of incomer , feeders and bus coupler ) 2.For Capacitor Bank: The capacitor Panel shall be same as that of the 11 kV bank ie incomer panel in all respect . In addition to relays provided in the I/C the follwing addition relays to be provided i) Circulating current relay with timer ii) Under Voltage Relay iii) Timer Relay Set 0.00

SS105 Adapter Panel for MCVCB (1250 A) Nos (KPTCL Supply) 0.00 0.00

SS106 Annunicator Panel (1 I/C+4F) Nos (KPTCL Supply) 0.00 0.00

SS107 11KV U.G. Cable with the required cable terminations as per technical Specification: 11KV XLPE cable, 1Cx1000Sq. mm U G Cable XLPE (from 110/11kV transformer to 11kV switchgear) Mtr 180.00 375.00 875.00 1,430.00

SS108 11KV XLPE cable, 3Cx 240Sq. mm. U G Cable XLPE (from 11kV switchgear to 11kV take off DP Structure) Mtr 160.00 950.00 1,110.00

SS109 One run of 11 kV , XLPE 95 sq mm Al , 3 core cable - ( to be run for Auxilliary transformers from 11 kV switch gear to 11 kv Switch gear to Auxilliary trf ) Mtr 55.00 55.00

SS110 Heat shrinkable type Cable termination kits suitable for 1Cx 1000 Sq.mm XLPE cable (Indoor type) No. 3.00 3.00 14.00 20.00

SS111 Heat shrinkable type Cable termination kits suitable for 1Cx 1000 Sq.mm XLPE cable (Out door type) No. 3.00 3.00 14.00 20.00

SS112 Heat shrinkable type Cable termination kits suitable for 3C x 240 Sq.mm XLPE cable (Indoor type) Nos 2.00 14.00 16.00

SS113 Heat shrinkable type Cable termination kits suitable for 3C x 240 Sq.mm XLPE cable (Out door type) Nos 2.00 14.00 16.00

SS114 Heat Shrinkable type cable termination kits suitable for 3X95 sq .mm XLPE cable (Outdoor type) Nos 1.00 1.00

SS115 Heat Shrinkable type cable termination kits suitable for 3X95 sq .mm XLPE cable (Indoor type) Nos 1.00 1.00

SS116 Capacitor bank with 0.2% Series Reactor & NCT Design, Engineering, supply, erection, testing & commissioning of 5.8 MVAR, 12.1 kV Capacitor Bank, star connected, Double Bank with internal fuses, terminal connectors with suitable neutral CT and station class LAs, 0.2% series reactor on neutral side with mounting structures for NCT, Capacitor Bank, station class LAs, Series reactor etc,. complete as per specification Set 2.00 2.00

SS117 1.1kV class PVC insulated armoured copper control cables of following sizes with Lugs/Ferrules/Gland as per technical specifications: 19 Core 2.5 Sq.mm. Mtr 500.00 200.00 2,000.00 3,000.00 1,522.00 200.00 7,422.00

SS123 Miscellaneous Items Rubber Mats 1000mmx1000mmsx10mm size No 2.00 4.00 4.00 50.00 60.00

SS124 Equipment and earthing name plate including fixing at outdoor yard. Nos 6.00 10.00 52.00 131.00 8.00 207.00

SS125 Equipment's required for establishing SCADA Communication as per KPTCL Specification Multi Functional Transducer(MFT), 0.2S class including labour charges No. 2.00 3.00 10.00 3.00 1.00 19.00

SS126 Opto Coupler (220 or 110V DC) including labour charges. No. 2.00 3.00 10.00 3.00 1.00 19.00

SS127 CABLES Current Cables - copper core with c/s 4.0sqmm mutlistrand 4 core Mtr 20.00 15.00 100.00 30.00 15.00 180.00

SS128 Voltage Cables- copper core with c/s 2.5sqmm mutlistrand 4 core Mtr 10.00 15.00 50.00 15.00 15.00 105.00

SS129 Signal Cables- armoured copper core with c/s 0.5sqmm mutlistrand 10 core Mtr 20.00 100.00 100.00 30.00 15.00 265.00

SS130 Control Cables -copper core with c/s 1.5sqmm mutlistrand 10 core Note : 1) Satellite Communication required will be arranged by SLDC. 2) The detailed BOM & specification of SCADA equipment shall be obtained from SEE-SCADA Mtr 10.00 65.00 50.00 15.00 15.00 155.00

SS131 Supply cable- Copper core with c/s 4.0 sq .mm Multi strands 3 core for AC input to UPS and UPS to RTU , conforming to KPTCL specification Mtr 15.00 15.00

SS132 Supply cable- Copper core with c/s 32.0 sq .mm Multi strands for Battery conforming to KPTCL specification Mtr 15.00 15.00

SS133 DI Card [ABB make RTU560A] with connecting cables (Market rate) Nos 2.00 2.00

SS134 TB (Knife type) (market rate) Nos 24.00 24.00

SS135 Knife type TB end plate (market rate) Nos 6.00 6.00

SS136 TB (Disconnecting type) (market rate) Nos 18.00 18.00

SS137 Disconnecting type TB end plate (market rate) Nos 3.00 3.00

SS138 Fire fighting equipment's with necessary mounting stands: Mechanical Foam type extinguisher - 50 litres capacity Nos 1.00 2.00 3.00

SS139 Mechanical Foam type extinguisher - 9 litres capacity Nos 2.00 2.00

SS140 Water type(gas pressure type) - 9 litres capacity Nos 3.00 3.00

SS141 Carbon dioxide type - 4.5 Kgs capacity Nos 2.00 3.00 5.00

SS142 Sand type G.I. Bucket 15 litres capacity Nos 4.00 6.00 10.00

SS143 Steel stands for above to have 4 buckets to each stand Nos 1.00 2.00 3.00

SS144 Supply of ACSR Conductor from Loc No 18 to Station Gantry Lynx ACSR Conductor Mtrs 500.00 500.00

SS145 Insulators Strings with Clamps , Arcing Horns and Hardware for ACSR Lynx Conductor Single Tension String firrtings using 8 Nos , 90 KN Disc Insultors Clamps, Arcing Horns, Hardwares (Set ), Terminataion of Line form Loc No .17, 18 to bay Set 12.00 12.00

SS146 Accessories for ACSR Lynx Conductor C Type Wedge Clamps for Lynx to Lynx Nos 12.00 12.00

SS147 Vibration Dampers Nos 9.00 9.00

SS148 MSC Joint for Lynx ACSR Nos 3.00 3.00

SS149 Hardware and Accesories for Ground Wire Tension Clamps Nos 3.00 3.00

SS150 STATION & YARD LIGHTING (OUTDOOR) : Supply of LED Street light luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material LED streetlight 200W Nos 6.00 6.00 2.00 14.00

SS151 Supplying and fixing of LED Flood Light with 150 W luminaire with presuure die cast aluminium housing body for optimal thermal dissipation. Lamp compatment comprisong of antiglare clear diffuser with Injection mpulded polycarbonate /clear glass material , delivering superiorn light output rated life Burning hrs 50000hr @ Lumen Maintenance of 70 % CCT > 5500 K, IP 66 optical and electrical compartment and impact resistance of complete luminaire >IK08 Power factor >0.9 with mains, Surge protection -Min 5 KV along with overvolatge /overload , short circuit miss- wiring protection , Compatible for pole mauling with outer dia of 40 mm to 50 mm . Universal Volatge driver to operate wide voltage range from 100 V to 270 V 50/60 Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with ROHS . LED light fixture with ------W System Power Consumption LED efficiency >13013/w, nominal CRI>75. Luminaire manufacturer should have in house facility acrredited by NABL /CPRI and any Government certified agency and Deign and development facility certified by ISO 9001:2008 . Hosing with supplier word mark /name shall be engraved /embossing on the die cast housing /Body part warranty of 2 yeras against any manufacturing defect working under standard Nos 3.00 3.00

SS152 Supplying and fixing (12 way SP & N ) 1 row 12 module regular MCB distribution boards on wall/ood Board /flush mounting using required clamps, bolts , nuts etc with provision for fixing suitable type capacity MCBs single phase /3 phase /Single door with powder coated painting Made out of 14 SWG MS enclosure Nos 1.00 1.00

SS153 Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes forcable/ conduit entry as required with one coat of primer of approved make etc. (200mm x 200mm x 65mm) Nos 6.00 6.00 2.00 14.00

SS154 PVC Insulated oCpper Control Cables :1.1 KV PVC Insulated Copper Control Cable with glands/Lugs /Ferrules etc as per technical Specfication 2CX6 sqmm Mtrs 300.00 300.00 250.00 850.00

SS155 Supplying and fixing of 6-32 A Single pole MCB 6.00 6.00 2.00 1.00 15.00

NOTE 1. Any clarifications / hard copy of drawings can be obtained from the office of the Chief General Manager(Tech), Corporate Office, KPTCL, Indhana Bhavan, BANGALORE - 560009

2. Spacers shall be provided wherever necessary and no extra charges is payable on account of the same.

3. Supply of equipment/materials and the Erection charges shall include loading and unloading.

4. Copper Flat and GI Flat required for Power Transformers (if supply is in Bidder's scope) shall be supplied alongwith the Transformers and no extra cost is payable on this account.

5. The Bidder shall take necessary action to ensure that all the materials supplied shall be properly housed to ensure satisfactory commissioning.

6. The bidder shall quote same rates for common materials in all the Item-Wise Percentage wise Financial Bid Offer.

7. Released materials shall be transported to the nearest Operational Store of KPTCL without any additional cost as per the directions of the Engineer in charge of the work.

8. The Bidder shall clearly indicate whether the materials/equipments are “Own manufactured” or “Bought out item”.

Karnataka Power Transmission Corporation Limited

SCHEDULE - 3A(ii) - Price Breakup for - ERECTION PORTION INCLUDING TESTING & COMMISSIONING and DISMANTLING PORTION.

SHEET FOR TECHNO COMMERCIAL OPENING (Unpriced)

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3726

Combined Package for, Work-A: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Karaya Sub station in Belthangady Taluka , Dakshina Kannada District Work-B: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Konaje Sub station in Ullala Taluka , Dakshina Kannada District Work-C: Providing additional 1X20 MVA , 110/33 kV Transformer and 33 kV bay at 110/33/11 kV Nittur Sub Station in Udupi Taluka & District Work-D: Creation of 33 kV Reference by providing 2X20 MVA , 110/33 kV Power Transformer along with 33 kV Terminal Bays at 110 kV Karkala Sub Station in Karakala Taluka , Udupi District Work E- Replacement of 2X10 MVA, 110/11 kV Power Transformers by 2X20 MVA 110/11 kV Power Transformer along with providing additional 11 kV Switchgear and replacement of indoor type old, retrofitted 11 kV switchgear by new 11 kV MCVCB outdoor Switchgear at 110 kV Halady Sub Station in Kundapura Taluka, Udupi District Work F- Balance portion of works pertaining to work of construction of 1 No of 110 KV Terminal Bay for the 110 kV Karaya Line at the existing 110/33/11 KV Sub Station at Puttur in Puttur Taluka, Dakishna Kannada District. on Partial Turnkey Basis, including Supply of all Materials/Equipments(Excluding supply of 11kV Switchgear) and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning

Bidder's Name & Address alongwith GSTIN no. :

The Chief General Manager(Tech), Corporate Office, KPTCL, Indhana Bhavan, BANGALORE - 560009.

BIDDERS SHALL FILL ONLY IN THE LIGHT BLUE COLOURED CELLS.

ERECTION PORTION INCLUDING TESTING & COMMISSIONING and DISMANTLING PORTION:

ERECTION PORTION INCLUDING TESTING & COMMISSIONING and DISMANTLING PORTION: Quantity - (With ASL) TOTAL

Sl No. Name of the Equipment/Materials Unit Work-A 110 kV Karaya Sub station 1X20 , 110/11 kV Trf Work-B 110 kV Konaje Sub station 1X20 , 110/11 kV Trf Work-C 110 kV Nittur Sub station 1X20 , 110/33 kV Trf Work-D 110 kV Karkala Sub station 2X20 , 110/33 kV Trf Work-E 110 kV Halady Sub station 2X20 , 110/11 kV Trf Work-F work of construction of 1 No of 110 KV Terminal Bay

SE1 POWER TRANSFORMER -Power Transformer 20 MVA, 110/33-11kV, Delta/Star, Dyn11, 3-Ph, 50Hz, Core Type, 2 Winding Delta/Star transformer, vector group DYn11 with OLTC ONAN/ONAF with fan control cubicle, RTCC Panel, Numerical RTCC panel, first filling of Oil and 10% spare oil in non-returnable drums etc., complete with Terminal connectors suitable for Single Drake/Moose ACSR on primary side of transformer and copper flat from neutral terminal to earthmat through NCT along with necessary support pin insulators as per technical(45 MT) Work C -20 MVA , 110/33-11 kV Trf Note: The Bidder has to quote for complete scope of erection of transformer including moving the transformer from the point of unloading to the point of erection, assemblying the complete transformer, filtration of oil using filter set of the bidder to achieve the required insulation vlaue as per I.E. Specifications, erection of the complete transformer(replacement of gaskets and miscellaneous itmes if any), wiring of transformer, testing & commissioning etc., complete. No 1.00 1.00 1.00 2.00 2.00 7.00

SE2 CIRCUIT BREAKER : SF6 Gas circuit breaker with Semi-Pneumatic/Pneumatic operated/Spring type operating mechanism, including mounting Structures arrangements with rigid, bi-metallic terminal connectors complete suitable for Drake ACSR Conductor and mounting structures complete as per technical specifications. 145kV, 3150A, 40 kA Class For 110 kV Transformer Nos 1.00 2.00 3.00

SE3 110 kV ,1250 A, 31.5 KA Class Nos 1.00 1.00

SE4 33kV, 800A, 25kA Class a) 33kV line b) 33kV side of 110/33kV Transformer Nos 2.00 6.00 8.00

SE5 ISOLATORS : Isolators including marshalling box and suitable terminal connectors, as required as per technical specification with solid core cylindrical post insulators complete set. A) 110KV, 1250A, 40KA Class Double Break Manually operated isolator with terminal connectors suitable for Moose ACSR /63 mm Al tube ( Work D)/ for Drake ACSR --- WORK F. , complete as per technical specification 1) Upright mounting type with out earth Switch (live point height 4600mm-Work C 2) Upright mounting type without earth switch Live Point Height 6350 mm Nos 1.00 2.00 2.00 5.00

SE6 3) Underhung type without earthswitch, manually operated Isolator for Bus sectionalizer. Nos 1.00 1.00

SE7 B) 33kV, 800A, 25KA Class Double Break Manually operated isolator With terminal connectors suitable for DRAKE ACSR complete as per technical specification a)Upright mounting type with Earth switch (Live point height 3750mm) b)Upright mounting type without Earth switch (Live point height 3750mm) c)Upright mounting type without Earth switch with Live Point Height 4750 m Nos 6.00 15.00 21.00

SE8 C) 11 kV isolator 1) 11kV isolator, double break 400 A, 25 KA capacity with rigid bi-metallic terminal connector suitable for Coyote ACSR for capacitor Bank. 2) 11kV isolator, single break 400 A, 25 KA capacity with Roaster switch, with rigid bimetallic terminal connector suitable for coyote ACSR. Set 2.00 6.00 8.00

SE9 CURRENT TRANSFORMER : Current transformer Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for Drake ACSR conductor, as per Technical Specicification. 110 kV class, 40 KA, CT of ratio 400-200-100/ 1-1-1A for Transformer / Lines Core - 1 : Purpose- Dist/ Dif, Acc Class PS , Vk 1100 V at 600 A, Rct 4 Ohm at 400/1 A Core- 2 : Purpose Metering , Acc Class 0.2 s, Burden 10 VA Core - 3 : Purpose Backup, Acc Class 5P20, Burden 30 VA Nos 0.00 3.00 3.00

SE10 110 kV class, 40 KA, CT of ratio 200-100/ 1-1-1A for Transformer Core - 1 : Purpose- Dist/ Dif, Acc Class PS , Vk 400 V at 200 A, Rct 2 Ohm at 200/1 A Core- 2 : Purpose Metering , Acc Class 0.2 s, Burden 10 VA Core - 3 : Purpose Backup, Acc Class 5P20, Burden 30 VA Nos 3.00 6.00 9.00

SE11 33 kV class, 25 KA, CT of ratio 400-200/ 1-1-1A for Transformer Lines Core - 1 : Vk-240 V, Rct 5 ohm at 400/1A, Accuracy class PS-Dist/Dif Core- 2 : 10 VA, Accuracy class 0.2s- Metering Core - 3 : 30 VA, Accuracy class 5P20-Back up Nos 3.00 12.00 15.00

SE12 33 kV class, 25 KA, CT of ratio 200-100/ 1-1-1A for Tranf Core - 1 : Vk-240 V, Rct 5 ohm at 400/1A, Accuracy class PS-Dist/Dif Core- 2 : 10 VA, Accuracy class 0.2s- Metering Core - 3 : 30 VA, Accuracy class 5P20-Back up Nos 3.00 6.00 9.00

SE13 33 kV Class, 31.5 kA, NCT of ratio 400-200/1-1-1A for REFR Protection (of similar rating and ratio as that of Incomer of 33 kV CT at 33 kV side of trfr) with terminal connector suitable for 2 Nos. of 50mmx8mm Copper flats. No 1.00 2.00 3.00

SE14 VOLTAGE TRANSFORMER : Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for Drake ACSR with marshalling box KIOSK as per technical specifications. 33 kV Class, 33 kV/ √3/110 V/√3-110 V/√3-110 V/√3 Core - 1 : 300 VA, Accuracy class 0.2 - Protection Core - 2 : 200 VA, Accuracy class 3P - Metering Core - 3 : 50 VA, Accuracy class 3P - Open delta No 3.00 6.00 9.00

SE15 SURGE ARRESTOR : (Procelain/Polymer) metal oxide, gapless type with rigid bimetallic terminal connectors suitable for Drake ACSR as per technical specifications. 96 kV, 10 KA, SM type-For Transformers 96 kV, 10 KA,- Class-II No 3.00 3.00 6.00 3.00 15.00

SE16 30 kV, 10 KA, class - III, Metal oxide type-For Transformers 30 kV, 10 KA, class - II, Metal oxide type-For OH line No 6.00 18.00 24.00

SE17 9 kV, 10 KA ( Transformer LV side) No 6.00 18.00 24.00

SE18 11kV ODS and take off structure Erection of Double Pole strucuture with 9.5 mters RCC Poles 300kg WL suitable for mounting 11kV 400A roaster isolator with provision for fixing 9kV, 10kA Lightning Arrestors complete set with wiring materials. Set 2.00 6.00 8

SE19 Supplying and erection of DP Structure with 9.5 mtr RCC poles ,110 kv 400 A Double Break Isolators , 9 kV , 10 KA Surge Arrestor ( 3 Nos ) , H Frame along with DOLO /HG fuse unit , LT Protection kit /LTD Box , LT Trivector meter complete set with all accesories for auxilliary transformer 1.00 1

SE20 Control and Relay Panel Complete -SCADA Compatible per specifications: Simplex type control and relay panels complete as per specifications. For Power Transformer 110/33 kV ,For Power Transformer 110/11 kV , For 110 KV Tr Line-Work F No. 1.00 2.00 1.00 4

SE21 For 33 kV Transmission line Note: 1. All the C&R Panels and associated panels shall be of one and the same make for uniformily and interchangeability of Components. 2. The accuracy class of metering core of CTs and VTs and ETV meter of C&R Panels shall be 0.2s accuracy class irrespective of what has been indicated else where in the bid document. 3. The electronic tri-vector meter with ABT & TOD features, DLMS protocol energy meter has to be provided. No. 1.00 4.00 5

SE22 Station structure and GI Mounting Structure : Note 1) Weight of Station Structure and GI Mounting Structure shall be as mentioned in prevailing SR A). 110 kV Side Station Structure fabricated out of galvanised mild steel including Bolts and Nuts 110kV Station Structure Tower - 1T1 with peak (1.054t per tower) (0.986t per tower for structure+ 0.068 t per tower for Bolt &Nuts) No/t 2/2.108 3/3.162 5/5.2700

SE23 Station Beam type (1B1) (0.553t per tower) (0.521t per tower for structure+ 0.032 t per tower for Bolt &Nuts) Work C- suitable for 8.2 m bay width No/t 1/0.553 2/1.106 1/0.553 04/2.2120

SE24 Station Beam Type -1B1 suitable for fixisng 110 kV Class Underhung type Isolator without earthswitch for Bus Sectionalizer No/t 1/0.553 01/0.5530

SE25 B)33 kV Side Station Strcuture fabricated out of Galvanised mild steel including Bolts and Nuts 33kV Station Structure Tower - 3T1 with peak (0.599t per tower) (0.57t per tower for structure+ 0.0285t per tower for Bolt &Nuts) No/t 05/2.993 09/5.387 14/8.379

SE26 ) 33kV Station Beams - 3B1 suitable for 6m Bay Width (0.242t per tower) (0.23t per tower for structure+ 0.0115t per tower for Bolt &Nuts) No/t 3/0.725 06/1.449 09/2.1735

SE27 Street Lighting lattice type Structure along with GI Pipe for fixing LED Lamp (0.182t per tower for structure +0.0091t per structure for Bolts & Nuts) No/t 6/1.147 6/1.147 2/0.3822 1/0.191 15/2.8665

SE28 GI Mounting Structure 110kV Isolator Live point height 4600 mm (0.752 t per Structure)(0.726 t per tower for structure+ 0.026 t per tower including Bolt &Nuts) No/t 1/0.752 2/1.504 1/0.752 04/3.0080

SE29 110kV Isolator Live point height 6350 mm (0.982 t per Structure)( 0.955 t per tower for structure+ 0.027 t per tower including Bolt &Nuts) 1/0.982 01/0.982

SE30 110kV Current transformer (0.158t per Structure) (0.146 t per tower for structure+ 0.012 t per tower for Bolt & Nuts) No/t 03/0.474 08/1.264 11/1.738

SE31 96kV Lightening Arrestors. (0.116t per Structure) (0.105 t per tower for structure+ 0.011 t per tower for Bolt & Nuts) No/t 03/0.348 03/0.348 06/0.696 12/1.3920

SE32 11 kV NCT (0.157 t Per Structure) ( 0146 t per tower for structure+0.011 t per tower for Bolts n Nuts) 01/0.157 01/0.157

SE33 110 kV Potential Transformers (0.148 t Per Structure) ( 0137 t per tower for structure+0.011 t per tower for Bolts n Nuts) 03/0.440

SE34 110kV Pedestal Insulators for Bus(0.14t per Structure) (0.127 t per tower for structure+ 0.013 t per tower for Bolt &Nuts) No/t 03/0.423 06/0.840 09/1.260

SE35 For High pedestal insulators for 110 kV side (0.150 t per tower) (0.134 t per tower for structure+ 0.016 t per tower for Bolt &Nuts) No/t 03/0.450 06/0.900 09/1.350

SE36 110 kV T Type rigid Bus support structure LPH 6350 mm (0.635 MT per Structure ) ( 0.603 t per tower for structure+ 0.032 t per tower for Bolt &Nuts) No/t 2/1.27 04/2.540 06/3.8100

SE37 33kV Isolator (LPH 3750 mm ) (0.257 t per Structure) (0.25 t per tower for structure+ 0.007t per tower for Bolt & Nuts) No/t 03/0.771 07/1.799 10/2.570

SE38 33kV Isolator (LPH 4750 mm ) (0.257 t per Structure) (0.25 t per tower for structure+ 0.007 t per tower for Bolt & Nuts) No/t 03/0.771 08/2.056 11/2.8270

SE39 33kV Current Transformer and 33kV NCT (0.157 t per Structure) (0.146t per tower for structure+ 0.011t per tower for Bolt & Nuts) No/t 7/1.099 18/2.826 25/3.925

SE40 i) 33kV Potential Transformer (0.093 t per Structure) (0.08885t per tower for structure+ 0.004t per tower for Bolt & Nuts) No/t 03/0.279 06/0.558 09/0.8357

SE41 33kV Lightening Arrestors (0.087 t per Structure) (0.082t per tower for structure+ 0.005t per tower for Bolt & Nuts) No/t 06/0.522 12/1.044 18/1.5660

SE42 33kV PI for Bus (0.087 t per Structure) (0.082t per tower for structure+ 0.005t per tower for Bolt & Nuts) No/t 16/1.392 17/1.479 33/2.8710

SE43 11kV Cable Terminating Structure for LV side of Transformer (0.072 t per Structure) (0.069t per tower for structure+ 0.003t per tower for Bolt & Nuts) No/t 1/0.072 1/0.072

SE44 11kV GOS/Cable Terminating Structure for 11 kV Capacitor Bank (0.158 t per Structure) (0.146t per tower for structure+ 0.012t per tower for Bolt & Nuts) No/t 02/0.316 02/0.316

SE45 Total Weight of Station Structures and Mounting Structures abricated out of galvanized mild steel (including Bolts & nuts) as per Technical Specification t 0.577 16.625 29.755 0.698 2.478 50.133

SE46 BUS BAR FORMATION : Interconnection of 33 kV Bus for Transformer -1 and proposed Transformer -using 33 kV UG Cable etc as per site requirement (2 runs) 33 kV 3 core XLPE UG Cable -400 sq mm Mtr 220.00 220.00

SE47 Heat Shrinkable outdoor type Cable Termination kit for 33 kV Core XLPE Cable Nos 4.00 4.00

SE48 Formation of Main/Cross Bus with Single Drake Conductor Nos 1.00 12.00 1.00 14.00

SE49 RIGID BUS With TAP & CLAMPS a) Aluminum pipe conforming to 6340 WP of IS-5082/1969 (BS1600-Sch 40 ) of following nominal diameter a) 75 mm ----110 kv Main Bus b) 63 mm size connecting Isolators to vertical tap ---110 kv side 33kV side-i) Aluminium pipe conforming to 6340WP of IS - 5082/1969 (BS 1600-Sch.40) of following nominal diameter a) 50mm --- 33KV Main Bus b) 38mm size connecting isolator to vertical tap --- 33kV side Mtrs 120.00 264.00 28.00 412.00

SE50 INSULATORS: Post Insulators Cylindrical Solid core as per IS5350, Part II & III i)110kV 1unit/stack Nos 9.00 24.00 33.00

SE51 ii) 33kV 1unit/stack Nos 16.00 17.00 33.00

SE52 LTAC Panel (indoor) : 415V, as per Technical specification comprising of Volt Meter, Ammester & 1 No. ETV meter. 1No. I/C MCCB 200A + 2Nos. 3 phase, 63A OG SFU + 2Nos. 3 phase, 32A OG SFU + 6Nos. 3 phase, 16A SFU etc., complete. Nos 1.00 1.00

SE53 AC Distribution Box (outdoor): AC Distribution box (outdoor) Single front type with 6 terminals 1200 x 1350 x 300 mm one I/C of 100 A MCCB 20KA+ 6 O/G 16 A MCB +1 O/G of 100 A HRC Fuse panel 415 V outdoor type No 1.00 1.00 2.00

SE54 LT DC Distribution Panel (Indoor) : as per Technical Specification comprising of Earth fault indicator ,indictaion circuit for AC Main failure , 1 No of 100 A SFU for IC+12 Nos , 32 A SFU for OG etc , complete No 1.00 1.00

SE55 LT Protection kit for auxilliary transformer No 1.00 1.00

SE56 LT Power armoured UG cable as per specification: a)1.1KV PVC Insulated 95 sqmm. Aluminium cable 4 Core with glands/lugs/ferrules b) 1.1kV class 4X16 sq mm Copper Cable with glands /lugs/ferrules c)1.1kV class 4X25 sq mm Copper Cable with glands /lugs/ferrules d) 1.1kV class 4X10 sq mm Copper Cable with glands /lugs/ferrules Mtr 70.00 250.00 103.00 423.00

SE57 11 kV Switchgear For Work A- a 11 kV MCVCB , 500 MVA ,25 kA, 1250 Feeder Panel (SCADA Compatible)-2 nos b. Adapter Panel for MCVCB (1250 A)-1 Nos c. Annunicator Panel (1 I/C+4F) WORK E- 11 kV 25 kA Metal clad VCB Switchgear (1600 Afor incomer & 1250 A for feeders outdoor type , each comprising of 1 I/C +6 F+2 CB+1BC+1AP(remote annunciation cum Control Panel ) with CTs and PTs etc complete as per technical spcification. Note :1. Simplex type Annuciator panel shall be provided for switchgear (consisiting of incomer , feeders and bus coupler ) 2.For Capacitor Bank: The capacitor Panel shall be same as that of the 11 kV bank ie incomer panel in all respect . In addition to relays provided in the I/C the follwing addition relays to be provided Note : The Switchgear will be supplied by KPTCL and the Bidder has to quote for complete scope of erection of Switchgear including moving the Switchgear from the point of unloading to the point of erection, erection of the complete Switchgear, wiring of Switchgear, testing & commissioning etc., complete Nos (KPTCL Supply) 4.00 4.00

SE58 11 kV 25 kA Metal clad VCB Switchgear (1600 Afor incomer & 1250 A for feeders outdoor type , each comprising of 2 I/C +12 F+2CB+1BC+1AP(remote annunciation cum Control Panel ) with CTs and PTs etc complete as per technical specification. Note :1. Simplex type Annuciator panel shall be provided for switchgear (consisiting of incomer , feeders and bus coupler ) 2.For Capacitor Bank: The capacitor Panel shall be same as that of the 11 kV bank ie incomer panel in all respect . In addition to relays provided in the I/C the follwing addition relays to be provided i) Circulating current relay with timer ii) Under Voltage Relay iii) Timer Relay Nos 18.00 18.00

SE59 11KV U.G. Cable with the required cable terminations as per technical Specification: a) 11KV XLPE cable, 1Cx1000Sq. mm U G Cable XLPE (from 110/11kV transformer to 11kV switchgear) b) 11KV XLPE cable, 3Cx 240Sq. mm. U G Cable XLPE (from 11kV switchgear to 11kV take off DP Structure) C)One run of 11 kV , XLPE 95 sq mm Al , 3 core cable - ( to be run for Auxilliary transformers from 11 kV switch gear to 11 kv Switch gear to Auxilliary trf )-Work E Mtr 340.00 375.00 1880.00 2595.00

SE60 c) Heat shrinkable type Cable termination kits suitable for 1Cx 1000 Sq.mm XLPE cable (Indoor type) d)Heat shrinkable type Cable termination kits suitable for 1Cx 1000 Sq.mm XLPE cable (Out door type) No. 6.00 6.00 28.00 40.00

SE61 e)Heat shrinkable type Cable termination kits suitable for 3C x 240 Sq.mm XLPE cable (Indoor type) f)Heat shrinkable type Cable termination kits suitable for 3C x 240 Sq.mm XLPE cable (Out door type) Heat Shrinkable type cable termination kits suitable for 3X95 sq .mm XLPE cable (Outdoor type) Heat Shrinkable type cable termination kits suitable for 3X95 sq .mm XLPE cable (Indoor type) Nos 4.00 30.00 34.00

SE62 1.1kV class PVC insulated armoured copper control cables of following sizes with Lugs/Ferrules/Gland as per technical specifications: i) 19 Core 2.5 Sq.mm. ii) 4 Core 6.0 Sq.mm. iii) 4 Core 2.5 Sq.mm. iv) 2 Core 6.0 Sq.mm (including Yard Lighting Quantity-500Mtrs for Work C, - 100 Mtr for WorkF, 150 Mtr for Work G .) v) 2 Core 2.5 Sq.mm. vi)10 Core 2.5 sq mm, Mtr 950.00 410.00 4700.00 14000.00 3863.00 1450.00 25373.00

SE63 Equipment's required for establishing SCADA Communication as per KPTCL Specification Multi Functional Transducer(MFT) No. 2.00 3.00 10.00 3.00 1.00 19.00

SE65 CABLES c) Current Cables - copper core with c/s 4.0sqmm mutlistrand 4 core d) Voltage Cables- copper core with c/s 2.5sqmm mutlistrand 4 core e) Signal Cables- armoured copper core with c/s 0.5sqmm mutlistrand 10 core f) Control Cables -copper core with c/s 1.5sqmm mutlistrand 10 core Work F-Copper core with c/s 4.0 sq .mm Multi strands 3 core for AC input to UPS and UPS to RTU , conforming to KPTCL specification Supply cable- Copper core with c/s 32.0 sq .mm Multi strands for Battery conforming to KPTCL specification Note : 1) Satellite Communication required will be arranged by SLDC. 2) The detailed BOM & specification of SCADA equipment shall be obtained from SEE-SCADA Mtr 60.00 195.00 300.00 90.00 90.00 735.00

SE66 Configuration of RTU and Engineering along with validation of data at SLDC Nos 3.00 3.00

SE67 Earth Mat formation : Supplying and laying of MS Flats of various sizes, welding and applying ACB paint to welded portion and covering without sodium bentonite clay as per the drawing/standard specification and consolidation. M.S Flat 50X6 MM Rmtr. 13802.00 13802.00

SE68 Earth Mat formation : Supplying and laying of MS Flats of various sizes, welding and applying ACB paint to welded portion and covering without sodium bentonite clay as per the drawing/standard specification and consolidation. M.S Flat 75X12 MM Rmtr. 10218.00 10218.00

SE69 Grounding of equipments with 50 x 6 mm G I flat and connecting equipments to the earth mat/ground pit Each point of earthing with all formation works like bending, twisting, drilling of holes and connecting by welding (inclusive of all T&P and consumables) to the earthmat/ground pit/point of earth connection, all the materials supplied by the contractor Rmtr. 200.00 160.00 1600.00 2700.00 280.00 300.00 5240.00

SE70 Grounding of equipment by provding cast iron pipe of 100 mm Dia ID 13 mm thickness 2.75 meter long with 2 part clamp out of G. I Flat 50X6 mm continuously welded alround thepipe using cast iron welding electrodes as per drawing including the cost of exacavation ( all materials to be supplied by the contractor ) Nos 3.00 3.00

SE71 Providing C.I. Pipe of 100mm ID 13mm thick 2.75 mtr. long with 2 part GI Flat 50x6mm clamp welded allround the pipe etc., including cost of excavation (all materials supplied by contractor) No. 2.00 14.00 40.00 24.00 80.00

SE72 Providing 25 mm dia M.S. Rod 1.05 metre long earthmat spikes including heating, bending top 50 mm overlap flattening and making spike edge at one end driving into the earth below the ground level and welding the rod with ground mat flat Nos 180.00 273.00 453.00

SE73 Supplying and fixing 450mm dia x 450mm height 1.5" to 2" Hume pipe collars for earth pits. Work C--14Nos. for equipment earthing + 20Nos. for deep bore earthing. So, Total =34Nos. as per approved revised earthmat drawing of SEE, R&D vide ltr. No. SEE(E)/R&D/KPTCL/EEE/F-131(4)/2023-24/1741-45 dtd:17/08/2023 No. 2.00 34.00 40.00 24.00 3.00 103.00

SE74 Providing Deep Bore earthing "Sinking bore of 150 mm clear dia using fast rig including fixing of 40mm dia MS rod, including jointing the pipes as per KPTCL standard and providing sodium bentonite treatment in the annular space, including transportation of rig and other supporting vehicles etc., complete, as per the directions of engineer in charge, including cost of MS rod & sodium bentonite". Drilling 150mm dia bore Rmtr 200.00 340.00 540.00

SE75 40mm dia MS rod (10mtr long-20No.- Work C),(5mtr long-8No- Work E.), Rmtr 200.00 340.00 540.00

SE76 GI Flat for joining two rods by weldind to obtain continious length per Joint 20.00 20.00

SE77 Bentonite Clay for 2 Nos of CI Pipe (Work E- Bentonite Clay- Kg 540, Sodium Bentonite treatement for CI Pipe Electrodes Kg 1080 ) Kgs 50.00 1800.00 1692.00 3542.00

SE78 Common salt=1800*0.2 Kgs 360.00 360.00

SE79 Sorting of structural materials made of fabricated angle iron Mt 0.75 0.75

SE80 1) DECOMMISSIONING Dismantling of 1x10 MVA, 110/11 kV, Transformer with accessories complete with oil etc., as per direction of site Engineer(WORK-A & B) Work E- Trf 1-38, Trf 2 -35 MT) t 37.00 38.60 73.00 148.60

SE81 b) Moving of Transformer from the plinth to the loading point as per direction of site Engineer. Work A- 30 Mtrs,Work B -50 Mtrs, Work E- 20 Mtr t 1110.00 1930.00 1460.00 4500.00

SE82 Dismantling of 110/11 kV C & R Panels for Transformer Nos 2.00 2.00

SE83 2) Releasing of Equipments: Releasing of LA Nos 3.00 3.00

SE84 Releasing of LA Mounting Arrestor-3 Nos MT 0.348 0.35

SE85 Releasing of 11 kV NCT Structure MT 0.157 0.314 0.47

SE86 Releasing of 11 k V Cable Terminating Structure for LV Side of Transformer (1 No) MT 0.072 0.07

SE87 Releasing and Reerection of 11 k V Cable Terminating Structure for LV Side of Transformer (1 No) MT 0.14 0.14

SE88 Releasing and Refixing of Post Insulators Solid Core type -110 kV Class ,1 Unit /Stack Nos 6.00 6.00

SE89 Releasing and Reerection of LV NCT of Transformer 1 & 2 Nos 0.00 4.00 4.00

SE90 Releasing and reerection of 11 kV NCT Structure MT 0.63 0.63

SE91 d) Releasing and Reerection of 11 kv Class , 25 kA NCT of ratio 1200-800/1-1-1 A Nos 0.00 2.00 2.00

SE92 Dismantling of existing beam - (Lattice type 1B1), releasing from 110KV Side Station Structure etc. ( Total Wt =0.48+0.024 B&N=0.504MT) =5723x0.504x1=2884.39 t 0.45 0.50 0.95

SE93 Releasing & Re-formation of busbar t 2.00 2.00

SE94 Releasing and reerection of Auxilliary Trf No 2.00 2.00

SE95 Dismantling of HV Side NCT Structure of Trf -2 t 0.31 0.31

SE96 Releasing of HV NCT of Trf 2 No 1.00 1.00

SE97 Dismantling of existing 11 kv SWG ( 2 I /C +12 F+1Bc+1CB) Set 1.00 1.00

SE98 Dismantling of Annunciator Panel No 2.00 2.00

SE99 Releasing of DP Structure Set 7.00 7.00

SE100 Releasing of Capacitor Bank No 1.00 1.00

SE101 Releasing of UG Cable 1X1000 sq mm-432 Mtr , 3X240 sq mm -194 Mtr, 3X95 sq mm-194 Mtr Mtr 820.00 820.00

SE102 PVC Insulated Copper Control Cable of Different Sizes Mtr 220.00 220.00

SE103 Releasing and Restringing of ACSR Lynx Conductor from Tower Loc No 16 & 17 Span 6.00 6.00

SE104 Stringing of ACSR Lynx Conductor from Tower Loc No 17 and 18 to Station Gantry Span 6.00 6.00

SE105 Erection ofYard Lightining Mounting Structure MT 0.19 0.19

SE106 Stringing of Ground Conductor from tower Loc No 17 to 18 to Station Gantry Span 2.00 2.00

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 3C(i) - Price Breakup for - Station Civil Portion.

SHEET FOR TECHNO COMMERCIAL OPENING (Unpriced)

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3726

Combined Package for, Work-A: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Karaya Sub station in Belthangady Taluka , Dakshina Kannada District Work-B: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Konaje Sub station in Ullala Taluka , Dakshina Kannada District Work-C: Providing additional 1X20 MVA , 110/33 kV Transformer and 33 kV bay at 110/33/11 kV Nittur Sub Station in Udupi Taluka & District Work-D: Creation of 33 kV Reference by providing 2X20 MVA , 110/33 kV Power Transformer along with 33 kV Terminal Bays at 110 kV Karkala Sub Station in Karakala Taluka , Udupi District Work E- Replacement of 2X10 MVA, 110/11 kV Power Transformers by 2X20 MVA 110/11 kV Power Transformer along with providing additional 11 kV Switchgear and replacement of indoor type old, retrofitted 11 kV switchgear by new 11 kV MCVCB outdoor Switchgear at 110 kV Halady Sub Station in Kundapura Taluka, Udupi District Work F- Balance portion of works pertaining to work of construction of 1 No of 110 KV Terminal Bay for the 110 kV Karaya Line at the existing 110/33/11 KV Sub Station at Puttur in Puttur Taluka, Dakishna Kannada District. on Partial Turnkey Basis, including Supply of all Materials/Equipments(Excluding supply of 11kV Switchgear) and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning

Bidder's Name & Address alongwith GSTIN no. :

The Chief General Manager(Tech), Corporate Office, KPTCL, Indhana Bhavan, BANGALORE - 560009.

BIDDERS SHALL FILL ONLY IN THE LIGHT BLUE COLOURED CELLS.

CIVIL PORTION Quantity ( With ASL) TOTAL

Sl. No. Specifications Unit Work A Work B Work C Work D Work E Work F

CVLB1 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth cum 217.63 57.3 9700 0 5900 0 15874.93

CVLB2 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m cum 63.32 58.53 8275 0 5810 26.82 14233.67

CVLB3 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates cum 2.01 4.25 86 90 176 2.29 360.55

CVLB4 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing, form work, centering & scaffolding and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates - (3% cosidered for Form work) cum 5.42 20.91 121 276 0 2.46 425.79

CVLB5 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) cum 7.87 0 407 0 445 0 859.87

CVLB6 Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per direc tions of Engineer-in-charge. Sqm 20.46 279.35 531 0 1680 0 2510.81

CVLB7 Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge. sqm 11.13 0 890 0 405 0 1306.13

CVLB8 Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification All other type of structures kg 142.91 1399.2 26000 8950 10800 377.29 47669.4

CVLB9 Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. kg 841.71 1096.25 5310 5000 6500 0 18747.96

CVLB10 Providing and laying to required line and slope roofing with corrugated asbestos cement sheet 6mm. thick fixed with galvanised iron J or L hooks, bolts and nuts 8mm. dia C.I plain and bitumen washers over the existing purlins, rafters and trusses including cost of materials, labour, complete as per specifications. Sqm 44.05 0 0 0 0 0 44.05

CVLB11 Providing and fixing ridges, hips with asbestos cement sheet roofing with G.I. J or L hooks, bolts and nuts 8mm. dia G.I.plain and bitumen washers, serrated or plain wings, adjustable ridges, including cost of materials, labour, complete as per specifications. m 3.3 0 0 0 0 0 3.30

CVLB12 Removing & Respreading of existing Jelly from the yard and conveying to the place as per the direction of Engineer in charge including labour, HOM of machinery etc. complete as per specification (MR) Sqm 3850 0 1150 0 212 0 5212.00

CVLB13 Loading and Unloading of Boulders(stone aggregates) by manual Means (work includes Relaying of stacked jelly for a thickness of 25mm for the work of asphalting to the entire eartmat area) Sqm 9000 1153 0 0 0 0 10153.00

CVLB14 Disposal of existing jelly which is in excess after relaying of 25mm layer for asphalting work and recovery will be made for disposal of jelly. Work includes as follows, including cost of tool,usage of machinery and other appurtenances required to completion of work as per direction of Engineer-in-charge.a) Loading and Unloading of Boulders by Manual Means (work includes Disposal of existing jelly which is in excess after relaying of 25mm layer in remaining area) 125mm thick layer Cum 481.25 295.42 0 0 0 40 816.67

CVLB15 b) Cost of Haulage excluding loading and Unloading, Case-1 : Surfaced Road,Taking output 10 t load and lead 10 km = 100 t.km t.Km 8662.5 5317.56 0 0 0 0 13980.06

CVLB16 Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/m2 using mechanical means for earth mat Sqm 9750 5332 0 0 0 0 15082.00

CVLB17 Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned with mechanical broom for earthmat Sqm 19500 10664 0 0 0 0 30164.00

CVLB18 Providing and laying Bituminous Macadam with 100 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 3.3% by weight of mix, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction for earthmat cum 487.5 266.6 0 0 0 0 754.10

CVLB19 Providing and laying Bituminous Concrete with 100 TPH capacity hot mix plant batch type using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5.2 per cent of mix and filler, transporting the hot mix to work site, laying with mechanical paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects for earthmat cum 243.75 133.3 0 0 0 0 377.05

CVLB20 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. cum 29.88 19.8 8300 470 5810 0 14629.68

CVLB21 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using copper PVC insulated multi strand 2x1.5Sqmm copper wire without switch, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.( 4/9) - II. Point wiring using class B Materialsc) Long point above 6Mtr up to 10Mtr from tapping point to out let via switch box point 6 0 0 0 0 0 6.00

CVLB22 Supplying of feet -PVC Batten with integrated LED tube LED light fitting 1 x 4ft - 36/40 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V@ 50/60Hz & Power factor greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition each 6 0 0 0 0 0 6.00

CVLB23 Providing and constructing laterite size stone masonry including cost and conveyance of all material curing etc complete as per specifications IS 3620/1979 having compressive strength not less than 3.50 N/mm2 for saturated dry sample -For super structure in CM 1:6. cum 4.14 56.28 45 17 133 0 255.42

CVLB24 Earth work in surface excavation for stripping, seating of bund, Road way by manual means for lowering & levelling the ground for all works other than foundation & depth in Ordinary rock and soft rock upto 300mm depth as per drawing and technical specifications, including setting out, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work (Work includes levelling of site) cum 0 111.72 0 0 0 0 111.72

CVLB25 Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work . cum 0 100 0 0 0 10.33 110.33

CVLB26 Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, form work, centering & scaffolding and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates - (50% considered for Form work) cum 0 0.74 0 1.1 0 0 1.84

CVLB27 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing, form work, centering & scaffolding and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (60% considered for Form work) cum 0 1.3 0 2.5 12 0 15.80

CVLB28 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing, form work, centering & scaffolding and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates- (70% considered for Form work) cum 0 6.3 0 0 0 0 6.30

CVLB29 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. sqm 0 62.54 0 180 0 0 242.54

CVLB30 Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & bonding rods at every 100 mm wherever necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work etc., and all other appurtenances complete in the following strata. All kinds of soils. Depth upto 1.50 m cum 0 36 5 0 83 5.4 129.4

CVLB31 Removing & Resetting existing Heavy Duty Cobble/Interlocking stones/Pavers of thickness 60/75/80/100mm using Cement and 40mm thick sand bed ( average thickness ) and compacting with plate vibrator to achieve final desired compaction & setting of paver to its final level , including cost of materials, labour and usage charges of machinery complete as per specifications. (The cost of new paver/stones required shall be added separately) sqm 0 30 0 0 0 0 30.00

CVLB32 Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge. cum 0 13.22 0 0 41.5 0 54.72

CVLB33 Demolishing brick work manually/ by mechanical means including stack ing of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge- In cement mortar. cum 0 18.08 0 0 0 0 18.08

CVLB34 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing, form work, centering & scaffolding and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20mm nominal size graded crushed coarse aggregate (35% considered for Form work) cum 0 0 96 43 154 0 293.00

CVLB35 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing, form work, centering & scaffolding and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates - (3% cosidered for Form work) cum 0 0 232 0 0 0 232.00

CVLB36 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing, form work, centering & scaffolding and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20mm nominal size graded crushed coarse aggregate (50% considered for Form work) cum 0 0 40 0 4 0 44.00

CVLB37 Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. For Road cum 0 0 100 20 180 0 300.00

CVLB38 Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm,aggregate cement ratio not to exceed 14:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 140 kg/ m3, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 t vibratory roller, finishing and curing. For Road cum 0 0 50 10 90 0 150.00

CVLB39 Construction of unreinforced, dowel jointed, M40 grade pavement quality concrete pavement over a prepared sub base in recommended proportions, coarse and fine aggregate conforming to IS 383:2016, maximum size of coarse aggregate not exceeding 31.5 mm, mixed in a batching and mixing plant as per approved mix design, limiting water cement ratio to maximum 0.4 to achieve minimum flexural strength or modulus of rupture of concrete being 4.5MPa transported to site, laid with a slip form paver finisher, spread, compacted and finished in a continuous operation including provision of texturing, contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant as per IRC 57:2018, debonding strip, dowel bar, tie rod, admixtures, curing compound, steel channels, finishing to lines and grades as per drawing- OPC @ 420 kg/m3 cum 0 0 75 15 135 0 225.00

CVLB40 Providing M-Sand : Supplying and filling in plinth, foundations / UG cable work with approved M-sand including watering, ramming, consolidating and dressing. The rate includes the cost of material, labour charges, required tools and plants etc., complete. Work shall be carried out as per the instructions of Engineer- in-charge of works as per the standard procedure.- cable trench cum 0 0 8 10 5 1.35 24.35

CVLB41 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 160mm dia., 6 kg/sqcm & class 3 m 0 0 50 0 50 20 120.00

CVLB42 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 110mm dia., 6 kg/sqcm & class 3 m 0 0 50 15 0 0 65.00

CVLB43 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 90mm dia., 6 kg/sqcm & class 3 m 0 0 50 0 0 0 50.00

CVLB44 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 25mm dia., 6 kg/sqcm & class 3 m 0 0 50 0 0 0 50.00

CVLB45 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 32mm dia., 6 kg/sqcm & class 3 m 0 0 50 0 0 0 50.00

CVLB46 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc excluding the cost of CI frame and cover. each 0 0 1 0 0 0 1.00

CVLB47 Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover. each 0 0 3 0 0 0 3.00

CVLB48 Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work site, rolling and lowering into trenches, laying true to line and level including loading and unloading at both destinations and jointing of pipes and specials, perfect linking of joints with jack to correct position including cost of jointing materials, i.e, rubber rings conforming to IS: 5382 for S&S RCC pipes, with all leads and lifts as directed and giving necessary hydraulic test as per ISS to the required pressure and commissioning etc. complete. (Contractor will make his own arrangements for procuring water for testing). Before the execution of the work, the contractor shall carry out the survey. RCC NP3 Class pipe of 600 mm dia. m 0 0 13 0 0 0 13.00

CVLB49 Spreading of Stone Dust : Supplying and providing stone dust in the station yard or wherever required including watering, ramming, consolidating and dressing. The rate includes the cost of material, labour charges, required tools and plants etc., complete. Work shall be carried out as per the instructions of Engineer-in-charge of works as per the standard procedure. cum 0 0 716 0 575 0 1291.00

CVLB50 Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants etc., complete. Work shall be carried out as per the instructions of Engineer in-charge of works as per the standard procedure. cum 0 0 1432 0 1150 0 2582.00

CVLB51 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. sqm 0 0 90 0 0 0 90.00

CVLB52 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 L/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. sqm 0 0 535 172 1795 0 2502.00

CVLB53 Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications.A Stone/Boulder cum 0 0 190 0 670 0 860.00

CVLB54 Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T & P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead b Rubble stone masonry in cement mortar. cum 0 0 0 6 0 0 6.00

CVLB55 Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T & P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead (i) By Manual Means c Prestressed/ Reinforced cement grade M-20 & above cum 0 0 0 1 0 0 1.00

CVLB56 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking to the appropriate disposal area as per direction of Engineer-in-charge.-Of area 3 m² and below sqm 0 0 0 5.5 0 0 5.50

CVLB57 Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the saelected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. -In all kinds of soils Depth upto 1.5 m cum 0 0 0 490 0 0 490.00

CVLB58 Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. -In ordinary/soft rock without blasting upto 1.5 m depth cum 0 0 0 490 0 0 490.00

CVLB59 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.-M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates - (70% cosidered for Form work) cum 0 0 0 1.6 0 0 1.60

CVLB60 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.-M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates - (50% cosidered for Form work) cum 0 0 0 8 19.5 0 27.50

CVLB61 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.-M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates - (45% cosidered for Form work) cum 0 0 0 2.25 3.5 0 5.75

CVLB62 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates-for cills cum 0 0 0 7 62 0 69.00

CVLB63 Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings kg 0 0 0 2150 10240 0 12390.00

CVLB64 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) including cost of materials, labour, usage charges of machinery complete as per specifications. (For battery room-Louvers shall be 1-1/2-inches (38.1 mm) deep and assembled entirely from aluminum components. Blades shall be 0.050-inch (1.27 mm) thick aluminum and frames shall be 0.063-inch (1.6 mm) thick aluminum. Blades shall be stationary, horizontal and spaced 3/4-inches (19.1 mm) on center.-Weight: 6.5 Kg/Sqft) kg 0 0 0 106 0 0 106.00

CVLB65 Providing and fixing double action hydraulic floor spring of approved brand manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge: With brass cover plate minimum 1.25 mm thickness including cost of materials, labour, usage charges of machinery complete as per specifications. each 0 0 0 1 0 0 1.00

CVLB66 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of ngineer-in charge: Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side including cost of materials, labour, usage charges of machinery complete as per specifications. sqm 0 0 0 2 0 0 2.00

CVLB67 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/m²) including cost of materials, labour, usage charges of machinery complete as per specifications sqm 0 0 0 34 5 0 39.00

CVLB68 Providing and fixing aluminium tubular handle bar 32 mm outer dia,3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge.: Polyester powder coated minimum thickness 50 micron aluminium tubular handle bar including cost of materials, labour, usage charges of machinery complete as per specifications. No 0 0 0 2 0 0 2.00

CVLB69 Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete, complying to ASTM C920, DIN 18540- F & ISO 11600 Upto 20 mm depth and 20 mm width including cost of materials, labour, usage charges of machinery complete as per specifications m 0 0 0 60 0 0 60.00

CVLB70 Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete including cost of materials, labour, usage charges of machinery complete as per specifications. No 0 0 0 1 0 0 1.00

CVLB71 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. Complete No 0 0 0 6 0 0 6.00

CVLB72 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge kg 0 0 0 155 50 0 205.00

CVLB73 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge -inside sqm 0 0 0 295 0 0 295.00

CVLB74 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. sqm 0 0 0 135 0 0 135.00

CVLB75 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. sqm 0 0 0 40 115 0 155.00

CVLB76 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent. sqm 0 0 0 48 132 0 180.00

CVLB77 Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary 19/20mm dia 2mm thick m 0 0 0 110 0 0 110.00

CVLB78 Supplying and fixing S hook made out of 14mm dia MS rod No 0 0 0 2 0 0 2.00

CVLB79 Supplying and fixing Metal fan box with round hook No 0 0 0 2 0 0 2.00

CVLB80 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. a) Short point up to 3Mtr from tapping point to out let via switch box point 0 0 0 2 0 0 2.00

CVLB81 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. b) Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch box point 0 0 0 2 0 0 2.00

CVLB82 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using copper PVC insulated multi strand 2x1.5Sqmm copper wire without switch, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.( 4/9) - II. Point wiring using class B Materialsc) Long point above 6Mtr up to 10Mtr from tapping point to out let via switch box point 0 0 0 2 0 0 2.00

CVLB83 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:201 4 sqmm m 0 0 0 136 0 0 136.00

CVLB84 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:201 2.5 sqmm m 0 0 0 120 0 0 120.00

CVLB85 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:201 1.0 sqmm m 0 0 0 60 0 0 60.00

CVLB86 Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete.-3 way each 0 0 0 1 0 0 1.00

CVLB87 Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete.-4-5 way each 0 0 0 1 0 0 1.00

CVLB88 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall-1-3 way each 0 0 0 1 0 0 1.00

CVLB89 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall-4-5 way each 0 0 0 1 0 0 1.00

CVLB90 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box 3 Module each 0 0 0 1 0 0 1.00

CVLB91 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box 4 Module each 0 0 0 1 0 0 1.00

CVLB92 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch each 0 0 0 6 0 0 6.00

CVLB93 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293-6Amps 3 way socket each 0 0 0 2 0 0 2.00

CVLB94 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293-Stepped fan regulator each 0 0 0 2 0 0 2.00

CVLB95 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293-16 Amps one way switch each 0 0 0 1 0 0 1.00

CVLB96 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32A SP each 0 0 0 1 0 0 1.00

CVLB97 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit. The pit should be filled with equal proprotion of salt and charcoal 150mm alround the pipe to complete depth. The connection from the pipe to the conduit etc, is to be established through GI wire of size as per ISI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and checknuts etc., the pipe shall have 16 through holes of 12 mm dia. No 0 0 0 1 0 0 1.00

CVLB98 Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete each 0 0 0 2 0 0 2.00

CVLB99 Fixing one exhaust fan in the nitch already left in the wall with bolts & nuts and 5A ceiling rose with sufficient lenngth of 23/0.0076 inch PVC insulated twin core wire. each 0 0 0 2 0 0 2.00

CVLB100 Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/79 and also comply with IS:1709/1984 with latest amendment, Rated voltage 220 V/ 50 Hz, Rated power input 48 W +/- 10 %,Rated current As per IS:374/79, Rated power factor 0.9 lagging(min), Rated speed 350 +/- 10% RPM, Rated air delivery 210 +/- 10% Cubic Meter Minimum, Rated service value ≥ 4.2 CMM / Watt, Three Blades of blade leaf 1.05 mm thick Aluminium Alloy sheet, Class B motor insulation,Bearing Two ball bearings, Top 6202, Bottom 6201 , as per IS specification, Motor wdg. Temp rise Shall not exceed 75 deg C over and ambient of 40 0C by resistance method at 245 Volts, Insulation resistance Shall not be less than Two Mega Ohms (2 M Ohms), Leakage current Should not exceed 210 Micro Amp, Power input, watt& current , Air Delivery & Fan Speed as per IS:374/1979 with latest amendment, 2 year manufacturer Warranty.and Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary length of 23 / 0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired.-48" Sweep 5 Star (1200mm) each 0 0 0 2 0 0 2.00

CVLB101 Fixing a ceiling/wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring. each 0 0 0 2 0 0 2.00

CVLB102 Supplying of feet -PVC Batten with integrated LED tube LED light fitting 1 x 4ft - 20/22 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V@ 50/60Hz & Power factor greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition each 0 0 0 20 0 0 20.00

CVLB103 Fixing all types and all capacities of fluorescent /falseceiling/ spot light/CFL/LED fittings indoor on the wall/ceiling/rafters/girders using 23/0.0076" twintwisted PVC insulated wires, required Nos of round blocks and clamps. On wall/ ceiling / Rafter / Girders. each 0 0 0 28 0 0 28.00

CVLB104 Supplying of recess mounting non integral type ........LED ...... W luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded fase ceiling clamps, Power LEDs with CCT 6500 degree K, CRI> 70%. Efficiency >100 lumen per watt, 120degree beam spread, life> 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level. LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF > 0.95, power loss should <5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, , THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition-LED modular down light 2'x2' - 40-42watt and Fixing all types and all capacities of 1'x4' / 2'x2' LED Light fittings indoor on the wall / ceiling / rafters / girders with supporting frame, using 23/0.0076” twin twisted necessary PVC insulated wires, required Nos of round blocks and clamps No 0 0 0 2 0 0 2.00

CVLB105 Extra length of GI pipe of class B 19mm dia for down rod. m 0 0 0 3 0 0 3.00

CVLB106 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT > 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire > IK08. Power Factor >0.9 with mains, Surge Protection- Min 5KV along with Over voltage/Overload, short circuit/ miss-wiring protection. Compatiblefor pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiency>130lm/w, nominal CRI >75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia Lumileds/Osram make LED Source and Fixing all types and all capacities of 1'x4' / 2'x2' LED Light fittings indoor on the wall / ceiling / rafters / girders with supporting frame, using 23/0.0076” twin twisted necessary PVC insulated wires, required Nos of round blocks and clamps..-LED Streetlight 90 W No 0 0 0 6 0 0 6.00

CVLB107 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 500X700 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets :With common burnt clay (non modular) bricks of class designation 3.5 chamber 0 0 0 4 0 0 4.00

CVLB108 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay (non modular) bricks of class designation 3.5 chamber 0 0 0 4 0 0 4.00

CVLB109 Providing Bitumen felt :Type 3 grade 1 sqm 0 0 0 40 0 0 40.00

CVLB110 Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness.- In area of light jungle sqm 0 0 0 4000 0 0 4000.00

CVLB111 Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300-2 for embankment construction. cum 0 0 0 1495 0 0 1495.00

CVLB112 Supplying and providing jelly in the station yard of uniform thickness including the cost of materials, labour charges, required tools and plants, etc., complete 25mm thick and providing and applying primer coat with SS1 grade bitumen emulsion on prepared surface of granular base including cleaning of road surface and sparying primer at the rate of 0.70kg/Sqm using mechanical means-one coat and providing and applying tack coat with RS1 bituminous emulsion using emulsion pressure distributor at the rate of 0.20kg/Sqm on the prepared bituminous surface cleaned with mechanical broom-one coat and providing and laying bituminous macadam with 100TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 3.3% by weight of mix, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction-50mm thick and providing and applying tack coat with RS1 bituminous emulsion using emulsion pressure distributer at the rate of 0.20kg/sqm on the prepared bituminous surface cleaned with mechanical broom-one coatg and providing and laying bituminous concrete with 100TPH capacity hot mix plant batch type using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5.2% of mix and filler, transporting the hot mix to work site, laying with mechanical paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No.507 complete in all respects-25mm thick cum 0 0 0 1495 0 0 1495.00

CVLB113 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing, form work, centering & scaffolding and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates - (70% cosidered for Form work) cum 0 0 0 0 15.5 7.69 23.19

CVLB114 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc excluding the cost of CI frame and cover.+ Chamber cover. each 0 0 0 0 0 3 3.00

CVLB115 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing, form work, centering & scaffolding and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates - (8% cosidered for Form work) cum 0 0 0 0 52 0 52.00

CVLB116 Supplying heavy gauge PVC conduit pipe 20mmdia 2mm thick confirming to IS2509 with suitable size bends, junction boxes,adhesive paste etc, and fixing using inverted wood plugs in case of RCC ceiling and RCCwall/stonestructure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws-19/20 mm dia 2 mm thick. m 0 0 0 0 105 0 105.00

CVLB117 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. - Medium point above 3mtrs upto 6mtrs from tapping point to outlet via switch point 0 0 0 0 14 0 14.00

CVLB118 Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/CC wall, including necessary rawl plugs, machine/NF screws, etc., complete-6 way each 0 0 0 0 7 0 7.00

CVLB119 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required numbers of machine screws, bolt, nuts, etc., complete on the existing metal/PVC box-6 module. each 0 0 0 0 7 0 7.00

CVLB120 Supplying of feet -PVC Batten with integrated LED tube LED light fitting 1 x 4ft - 20/22 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V@ 50/60Hz & Power factor greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition each 0 0 0 0 14 0 14.00

CVLB121 Fixing all types and all capacities of fluorescent /falseceiling/ spot light/CFL/LED fittings indoor on the wall/ceiling/rafters/girders using 23/0.0076" twintwisted PVC insulated wires, required Nos of round blocks and clamps. On wall/ ceiling / Rafter / Girders. Using necessary length GI Chain. each 0 0 0 0 14 0 14.00

CVLB122 Supplying and fixing of modular 6A flush/projected type socket and 6A flush/projected SP switch & connected accessories on existing modular plate as per IS 3854 and IS 1293 each 0 0 0 0 7 0 7.00

CVLB123 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K and complete wiring as required conforming to IEC 60898 - 6-32Amps DP. each 0 0 0 0 7 0 7.00

CVLB124 Supplying and fixing regular MCB distribution boards on all/ woodboard flushmounting using required clamps,bolts,nuts etc.,with provision for fixing suitable type capacity MCB's single phase/3phase/single door with powder coated painting Made out of 14SWG MS enclosure.-Single Door/4 Way SP & N each 0 0 0 0 7 0 7.00

CVLB125 Burnt Brick Class designation 35(Non-Modular)(Ground Moulded) each 0 0 0 0 1350 0 1350.00

CVLB126 Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 L per 50 kg of cement or as per direction of Engineer incharge. sqm 0 0 0 0 52 0 52.00

CVLB127 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. sqm 0 0 0 0 331 0 331.00

CVLB128 Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge m 0 0 0 0 85 0 85.00

CVLB129 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete. sqm 0 0 0 0 24 0 24.00

CVLB130 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in charge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) including cost of materials, labour, usage charges of machinery complete as per specifications. kg 0 0 0 0 57 0 57.00

CVLB131 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge: Pre-laminated particle board with decorative lamination on both sides including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. sqm 0 0 0 0 3 0 3.00

CVLB132 Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material to the appropriate disposal area as per direction of Engineer-in-charge- G.S. Sheet sqm 0 0 0 0 83 0 83.00

CVLB133 Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking to the appropriate disposal area as per direction of Engineer-in-charge. kg 0 0 0 0 690 0 690.00

CVLB134 Demolishing R.C.C. work manually/ by mechanical means including stack ing of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. cum 0 0 0 0 39 0 39.00

CVLB135 Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer in-charge cum 0 0 0 0 103 0 103.00

CVLB136 Credit items 0.00

CVLB137 Recovery of jelly amount as per market rate cum 481.25 295.42 0 0 0 0 776.67

CVLB138 Released TMT Steel reinforcement from RCC kg 0 0 0 0 1070 0 1070.00

CVLB139 Released Size stone 200x200x230mm (Granite) No. 0 0 0 0 4882 0 4882.00

CVLB140 Released Laterite Size stone (Market Rate) No. 0 0 0 0 2031 0 2031.00

CVLB141 Released Wooden Door/Window frames cum 0 0 0 0 0.55 0 0.55

1) The land will be handed over " As is where is condition".

Place Designation

Name of the company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE-5 COMMERCIAL DEVIATION

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3726

Combined Package for, Work-A: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Karaya Sub station in Belthangady Taluka , Dakshina Kannada District Work-B: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Konaje Sub station in Ullala Taluka , Dakshina Kannada District Work-C: Providing additional 1X20 MVA , 110/33 kV Transformer and 33 kV bay at 110/33/11 kV Nittur Sub Station in Udupi Taluka & District Work-D: Creation of 33 kV Reference by providing 2X20 MVA , 110/33 kV Power Transformer along with 33 kV Terminal Bays at 110 kV Karkala Sub Station in Karakala Taluka , Udupi District Work E- Replacement of 2X10 MVA, 110/11 kV Power Transformers by 2X20 MVA 110/11 kV Power Transformer along with providing additional 11 kV Switchgear and replacement of indoor type old, retrofitted 11 kV switchgear by new 11 kV MCVCB outdoor Switchgear at 110 kV Halady Sub Station in Kundapura Taluka, Udupi District Work F- Balance portion of works pertaining to work of construction of 1 No of 110 KV Terminal Bay for the 110 kV Karaya Line at the existing 110/33/11 KV Sub Station at Puttur in Puttur Taluka, Dakishna Kannada District. on Partial Turnkey Basis, including Supply of all Materials/Equipments(Excluding supply of 11kV Switchgear) and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning

Please fill Only in the Light Blue Coloured Cell.

Please key in the SlNo.,Section , Clause , Description as given in bid sheets and finally your Statement of Deviation/Variations.

This Sheet would be opened at the Techno-Commercial Opening. Please refer Vendor Manual attached for further details.

For any further assistance for submitting your bids please call up KPTCL Office.

We agree to provide all original Documents in support of the information provided for verification upon request. (Key in as YES in the space provided)

We understand that the electonic bid submitted by us is a valid offer in accordance with IT Act. (Key in as YES in the space provided)

We are fully aware of the electronic bid formalities and abide by the same. (Key in as YES in the space provided)

If you are not deviating from any of the clauses mentioned please key in as 'NO DEVIATION' in the space provided.

Bidder's Name & Address alongwith GSTIN no. :

TO, The Chief General Manager(Tech), Corporate Office, KPTCL, Indhana Bhavan, BANGALORE - 560009

I/we have read each of the Clauses mentioned in INVITATION FOR TENDERS , INSTRUCTION TO TENDERERS , CONDITIONS OF CONTRACT, SPECIAL CONDITIONS OF CONTRACT and COMMERCIAL TERMS AND CONDITIONS and all the sections of Bid documents.

The following are the commercial Deviations and Variations from and exceptions to the Specifications and documents for

Combined Package for, Work-A: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Karaya Sub station in Belthangady Taluka , Dakshina Kannada District Work-B: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Konaje Sub station in Ullala Taluka , Dakshina Kannada District Work-C: Providing additional 1X20 MVA , 110/33 kV Transformer and 33 kV bay at 110/33/11 kV Nittur Sub Station in Udupi Taluka & District Work-D: Creation of 33 kV Reference by providing 2X20 MVA , 110/33 kV Power Transformer along with 33 kV Terminal Bays at 110 kV Karkala Sub Station in Karakala Taluka , Udupi District Work E- Replacement of 2X10 MVA, 110/11 kV Power Transformers by 2X20 MVA 110/11 kV Power Transformer along with providing additional 11 kV Switchgear and replacement of indoor type old, retrofitted 11 kV switchgear by new 11 kV MCVCB outdoor Switchgear at 110 kV Halady Sub Station in Kundapura Taluka, Udupi District Work F- Balance portion of works pertaining to work of construction of 1 No of 110 KV Terminal Bay for the 110 kV Karaya Line at the existing 110/33/11 KV Sub Station at Puttur in Puttur Taluka, Dakishna Kannada District. on Partial Turnkey Basis, including Supply of all Materials/Equipments(Excluding supply of 11kV Switchgear) and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning

These deviations and variations are exhaustive. Except these deviations, the entire work shall be performed as per your specifications and documents.

Sl. NO. SECTION CLAUSE NO. DESC. AS PER SPECIFICATION STATEMENT OF DEVIATIONS/VARIATIONS

Note : Deviations specified elsewhere in the specification will not be considered.

Place Designation

Name of the company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE-6 : TECHNICAL DEVIATION

SHEET FOR TECHNO-COMMERCIAL OPENING

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3726

Combined Package for, Work-A: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Karaya Sub station in Belthangady Taluka , Dakshina Kannada District Work-B: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Konaje Sub station in Ullala Taluka , Dakshina Kannada District Work-C: Providing additional 1X20 MVA , 110/33 kV Transformer and 33 kV bay at 110/33/11 kV Nittur Sub Station in Udupi Taluka & District Work-D: Creation of 33 kV Reference by providing 2X20 MVA , 110/33 kV Power Transformer along with 33 kV Terminal Bays at 110 kV Karkala Sub Station in Karakala Taluka , Udupi District Work E- Replacement of 2X10 MVA, 110/11 kV Power Transformers by 2X20 MVA 110/11 kV Power Transformer along with providing additional 11 kV Switchgear and replacement of indoor type old, retrofitted 11 kV switchgear by new 11 kV MCVCB outdoor Switchgear at 110 kV Halady Sub Station in Kundapura Taluka, Udupi District Work F- Balance portion of works pertaining to work of construction of 1 No of 110 KV Terminal Bay for the 110 kV Karaya Line at the existing 110/33/11 KV Sub Station at Puttur in Puttur Taluka, Dakishna Kannada District. on Partial Turnkey Basis, including Supply of all Materials/Equipments(Excluding supply of 11kV Switchgear) and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning

Please key in the SlNo., Section , Clause , Description as given in Bid sheets and finally your Statement of Deviation/Variations.

This Sheet would be opened at the Techno-Commercial Opening.

For any further assistance for submitting your bids please call up KPTCL office. Please fill only in the blue coloured cells.

We agree to provide all original Documents in support of the information provided for verification upon request. (Key in as YES in the space provided)

We understand that the electonic bid submitted by us is a valid offer in accordance with IT Act. (Key in as YES in the space provided)

We are fully aware of the electronic bid formalities and abide by the same. (Key in as YES in the space provided)

If you are not deviating from any of the clauses mentioned please key in as 'NO DEVIATION' in the space provided.

Bidder's Name & Address alongwith GSTIN no. : TO,

The Chief General Manager(Tech), Corporate Office, KPTCL, Indhana Bhavan, BANGALORE - 560009

The following are the Technical Deviations and Variations from and exceptions to the Specifications and documents for

Combined Package for, Work-A: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Karaya Sub station in Belthangady Taluka , Dakshina Kannada District Work-B: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Konaje Sub station in Ullala Taluka , Dakshina Kannada District Work-C: Providing additional 1X20 MVA , 110/33 kV Transformer and 33 kV bay at 110/33/11 kV Nittur Sub Station in Udupi Taluka & District Work-D: Creation of 33 kV Reference by providing 2X20 MVA , 110/33 kV Power Transformer along with 33 kV Terminal Bays at 110 kV Karkala Sub Station in Karakala Taluka , Udupi District Work E- Replacement of 2X10 MVA, 110/11 kV Power Transformers by 2X20 MVA 110/11 kV Power Transformer along with providing additional 11 kV Switchgear and replacement of indoor type old, retrofitted 11 kV switchgear by new 11 kV MCVCB outdoor Switchgear at 110 kV Halady Sub Station in Kundapura Taluka, Udupi District Work F- Balance portion of works pertaining to work of construction of 1 No of 110 KV Terminal Bay for the 110 kV Karaya Line at the existing 110/33/11 KV Sub Station at Puttur in Puttur Taluka, Dakishna Kannada District. on Partial Turnkey Basis, including Supply of all Materials/Equipments(Excluding supply of 11kV Switchgear) and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning

These deviations and variations are exhaustive.Except these deiviations and variations, the entire work shall be performed as per your specification and documents.

Sl. NO. SECTION CLAUSE NO. DESC. AS PER SPECIFICATION STATEMENT OF DEVIATIONS/VARIATIONS

Note : Deviations specified elsewhere in the specification will not be considered.

Place Designation

Name of the company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE 7(List of special tools and tackles )

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3726

Combined Package for, Work-A: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Karaya Sub station in Belthangady Taluka , Dakshina Kannada District Work-B: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Konaje Sub station in Ullala Taluka , Dakshina Kannada District Work-C: Providing additional 1X20 MVA , 110/33 kV Transformer and 33 kV bay at 110/33/11 kV Nittur Sub Station in Udupi Taluka & District Work-D: Creation of 33 kV Reference by providing 2X20 MVA , 110/33 kV Power Transformer along with 33 kV Terminal Bays at 110 kV Karkala Sub Station in Karakala Taluka , Udupi District Work E- Replacement of 2X10 MVA, 110/11 kV Power Transformers by 2X20 MVA 110/11 kV Power Transformer along with providing additional 11 kV Switchgear and replacement of indoor type old, retrofitted 11 kV switchgear by new 11 kV MCVCB outdoor Switchgear at 110 kV Halady Sub Station in Kundapura Taluka, Udupi District Work F- Balance portion of works pertaining to work of construction of 1 No of 110 KV Terminal Bay for the 110 kV Karaya Line at the existing 110/33/11 KV Sub Station at Puttur in Puttur Taluka, Dakishna Kannada District. on Partial Turnkey Basis, including Supply of all Materials/Equipments(Excluding supply of 11kV Switchgear) and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning

Bidder's Name & Address alongwith GSTIN no. : TO,

The Chief General Manager(Tech), Corporate Office, KPTCL, Indhana Bhavan, BANGALORE - 560009

List of special tools and tackles the price of which is included in bid price.

Sl. No. For equipment Description of item Unit Quantity

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3726

Combined Package for, Work-A: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Karaya Sub station in Belthangady Taluka , Dakshina Kannada District Work-B: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Konaje Sub station in Ullala Taluka , Dakshina Kannada District Work-C: Providing additional 1X20 MVA , 110/33 kV Transformer and 33 kV bay at 110/33/11 kV Nittur Sub Station in Udupi Taluka & District Work-D: Creation of 33 kV Reference by providing 2X20 MVA , 110/33 kV Power Transformer along with 33 kV Terminal Bays at 110 kV Karkala Sub Station in Karakala Taluka , Udupi District Work E- Replacement of 2X10 MVA, 110/11 kV Power Transformers by 2X20 MVA 110/11 kV Power Transformer along with providing additional 11 kV Switchgear and replacement of indoor type old, retrofitted 11 kV switchgear by new 11 kV MCVCB outdoor Switchgear at 110 kV Halady Sub Station in Kundapura Taluka, Udupi District Work F- Balance portion of works pertaining to work of construction of 1 No of 110 KV Terminal Bay for the 110 kV Karaya Line at the existing 110/33/11 KV Sub Station at Puttur in Puttur Taluka, Dakishna Kannada District. on Partial Turnkey Basis, including Supply of all Materials/Equipments(Excluding supply of 11kV Switchgear) and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning

NOTE: 1 ) SHALL BE UPLOADED WITHOUT PRICES

Bidder's Name & Address alongwith GSTIN no. : To,

The Chief General Manager(Tech), Corporate Office, KPTCL, Indhana Bhavan, BANGALORE - 560009

We have uploaded with our proposal the following additional information.

Sl. No. Brief Description of information Ref. and Page No.

Place Designation

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE - 9 (1 of 5) : QUALIFYING REQUIREMENTS

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3726

Combined Package for, Work-A: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Karaya Sub station in Belthangady Taluka , Dakshina Kannada District Work-B: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Konaje Sub station in Ullala Taluka , Dakshina Kannada District Work-C: Providing additional 1X20 MVA , 110/33 kV Transformer and 33 kV bay at 110/33/11 kV Nittur Sub Station in Udupi Taluka & District Work-D: Creation of 33 kV Reference by providing 2X20 MVA , 110/33 kV Power Transformer along with 33 kV Terminal Bays at 110 kV Karkala Sub Station in Karakala Taluka , Udupi District Work E- Replacement of 2X10 MVA, 110/11 kV Power Transformers by 2X20 MVA 110/11 kV Power Transformer along with providing additional 11 kV Switchgear and replacement of indoor type old, retrofitted 11 kV switchgear by new 11 kV MCVCB outdoor Switchgear at 110 kV Halady Sub Station in Kundapura Taluka, Udupi District Work F- Balance portion of works pertaining to work of construction of 1 No of 110 KV Terminal Bay for the 110 kV Karaya Line at the existing 110/33/11 KV Sub Station at Puttur in Puttur Taluka, Dakishna Kannada District. on Partial Turnkey Basis, including Supply of all Materials/Equipments(Excluding supply of 11kV Switchgear) and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning

BIDDER'S NAME AND ADDRESS:

a) * We have submitted bid as individual Bidder. (Key in Individual Bidder ) The Chief General Manager(Tech), Corporate Office, KPTCL, IndhanaBhavan, BANGALORE - 560009

b) * We have submitted bid in Consortium with the following Bidders. (Key in Consortium )

Name of Consortium Partner Scope / Participation of each Consortium / Joint Venture Partner

(* Fill-up whichever is applicable)

1.0 GENERAL INFORMATION

The Bidder, bidding for this package are requested to complete the information in the following form.

Sl. No. Particulars Bidder Details

1 Name of the Firm

2 Address of Head Office / Registered Office GST no.

5 Name of Contact person with Designation

6 Place of Incorporation/Registration

7 Year of Incorporation/Registration

8 Constitution or legal status of Tenderer [Upload copy]

9 Place of Registration [Upload copy]

10 Principal place of business

2.0 We are furnishing the following details/documents in support of Qualifying requirement for above mentioned project

Sl.No. Bidder Details Indicate Yes/No For individual Bidder In case of Consortium :

Lead Bidder Consortium partner

(a) Written power of attorney of the signatory on the bid to commit the bidder.

1 Uploaded / Not

(b) Certificate of Registration of the Company. Please mention the date of incorporation of the company

1 Uploaded / Not

(c ) Valid Super Grade Electrical Contractor’s License issued by the Government of Karnataka as on the date of techno commercial Bid opening. Please mention the date of expiry of the License certificate issued by GOK/ Undertaking to this effect

1 Uploaded / Not

(d) Self declaration regarding Litigation w.r.t KPTCL contracts over the last five years (refer IFT)

1 Uploaded / Not

(e) Self declaration for ‘not being disqualified regarding non-performance in any of the Government utilities in the past five years’. (refer IFT)

1 Uploaded / Not

(f) An undertaking to source the supply of equipment/ material from KPTCL approved vendors only as per QR for Vendor registration, available in the KPTCL website ie., kptcl.karnataka.gov.in, Link Tender and Procurement-Application for Vendor.

1 Uploaded / Not

(g) Self declaration regarding no action against the bidder have been taken by KPTCL in respect of Risk & Cost clause

1 Uploaded / Not

(h) Self declaration regarding 'Eligibility clauses in respect of restrictions on procurement from a bidder of a country which shares a land border with India as per Annexure-XVI

1 Uploaded / Not

(i) Self declaration regarding RESTRICTIONS ON SOURCING OF EQUIPMENTS/MATERIALS BY THE BIDDER FROM A VENDOR OF A COUNTRY WHICH SHARES A LAND BORDER WITH INDIA as per Annexure -XVII

1 Uploaded / Not

Section 3 : 1.3 Work performed of similar nature in the last Ten years of Bidder as per Clause No: 3.2 (b) (i) of ITT of Bidder/Lead Bidder and 2.2(I) of ITT of Consortium Partner.

Project Name Name & Address of the Employer Description of Work Voltage class Number of Sub-Stations/TBs/Augmentation/Replacement works Contract Number Value of contract Rs. Lakh Date of issue of work order Specified period of completion Actual date of commissioning Remarks explaining reasons for delay in commisioning of work

Name of Consortium Partner

Note : 1 . i.The documentary proof of fulfilling the qualifying requirements shall be uploaded along with the bid. The bidder shall upload the P.O,LOI/LOA, DWA, Work done, Performance Certificates issued by the end users not below the rank of Executive/ Divisional Engineer along with the bid. ii.The work experience of Bidders who have executed DCW works/ Self execution works under the supervision of KPTCL officers and the works executed for BMRCL/ KIADB/ BDA/KBJNL/IPP works/other Government or Public sector organizations will also be considered subject to fulfilling the stipulated qualifying requirements and uploading necessary documentary evidence

2. The qualifying experience of the Bidder who is having qualifying experience shall be furnished in the above performa and Documentary Proof in support of above shall be uploaded in the form of certificates issued by authorized officers of concerned organisations.

3. IF this sheet is insufficient for furnishing the qualifying experience of the Bidder then similar sheets shall be seperately uploaded.

4. In case of work executed under a contract that had been awarded on a joint venture, the experience of individual joint venture partner shall be considered limited to the scope of that partner under the said contract. The copy of the agreement executed with awarding agency shall be uploaded as proof of the same

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE - 9 (2 of 5) : QUALIFYING REQUIREMENTS

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3726

Combined Package for, Work-A: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Karaya Sub station in Belthangady Taluka , Dakshina Kannada District Work-B: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Konaje Sub station in Ullala Taluka , Dakshina Kannada District Work-C: Providing additional 1X20 MVA , 110/33 kV Transformer and 33 kV bay at 110/33/11 kV Nittur Sub Station in Udupi Taluka & District Work-D: Creation of 33 kV Reference by providing 2X20 MVA , 110/33 kV Power Transformer along with 33 kV Terminal Bays at 110 kV Karkala Sub Station in Karakala Taluka , Udupi District Work E- Replacement of 2X10 MVA, 110/11 kV Power Transformers by 2X20 MVA 110/11 kV Power Transformer along with providing additional 11 kV Switchgear and replacement of indoor type old, retrofitted 11 kV switchgear by new 11 kV MCVCB outdoor Switchgear at 110 kV Halady Sub Station in Kundapura Taluka, Udupi District Work F- Balance portion of works pertaining to work of construction of 1 No of 110 KV Terminal Bay for the 110 kV Karaya Line at the existing 110/33/11 KV Sub Station at Puttur in Puttur Taluka, Dakishna Kannada District. on Partial Turnkey Basis, including Supply of all Materials/Equipments(Excluding supply of 11kV Switchgear) and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning

BIDDER'S NAME AND ADDRESS: TO,

The Chief General Manager(Tech), Corporate Office, KPTCL, Indhana Bhavan, BANGALORE - 560009

Section 3 : 1.5 Information on works for which Tenders have been submitted and works which are yet to be completed as on the date of this Tender of a Bidder

(A) Existing commitments and on-going works:

Description of work Place & State Contract No & Date Name and Address of Employer Value of contract (Rs. Lakh) Stipulated period of cof Completion Value of works remaining to be completed ( Rs.Lakhs) (Attach Certificates from Engineers –in- Charge) Anticipated date of commissioning

Ex-Works GST Total(Ex-works+GST)

Name of the Consortium Partner

Note:Attach Certificates from Engineers –in- Charge

B)Works for which Tenders already submitted

Description of work Place & State Name and Address of Employer Estimated value of works (Rs. Lakh) Stipulated period of Completion Date when decision is expected Remarks if any

Ex-works GST Total(Ex-works+GST)

Name of the Consortium Partner

i) The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent. OR The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be verified and certified by Chartered Accountant/ Cost Auditor. However, the Bidder has to upload the PO/Work Award copies for existing commitments and on-going works

ii) A self-declaration is to be uploaded by the bidder of both Lead Bidder & Consortium Partner (in case of Consortium) stating that "the information with regard to assessed available tender capacity (Works on Hand) furnished are correct”.

iii. Bidders shall furnish Certificate from Chartered Accountants for split details of Ex-works values and GST of Contract values of the works in the prescribed format as at Clause No. 1.5 of Section-3: Qualification Information of both Lead Bidder & Consortium Partner (in case of Consortium).

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE - 9 (3 of 5) : QUALIFYING REQUIREMENTS

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3726

Combined Package for, Work-A: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Karaya Sub station in Belthangady Taluka , Dakshina Kannada District Work-B: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Konaje Sub station in Ullala Taluka , Dakshina Kannada District Work-C: Providing additional 1X20 MVA , 110/33 kV Transformer and 33 kV bay at 110/33/11 kV Nittur Sub Station in Udupi Taluka & District Work-D: Creation of 33 kV Reference by providing 2X20 MVA , 110/33 kV Power Transformer along with 33 kV Terminal Bays at 110 kV Karkala Sub Station in Karakala Taluka , Udupi District Work E- Replacement of 2X10 MVA, 110/11 kV Power Transformers by 2X20 MVA 110/11 kV Power Transformer along with providing additional 11 kV Switchgear and replacement of indoor type old, retrofitted 11 kV switchgear by new 11 kV MCVCB outdoor Switchgear at 110 kV Halady Sub Station in Kundapura Taluka, Udupi District Work F- Balance portion of works pertaining to work of construction of 1 No of 110 KV Terminal Bay for the 110 kV Karaya Line at the existing 110/33/11 KV Sub Station at Puttur in Puttur Taluka, Dakishna Kannada District. on Partial Turnkey Basis, including Supply of all Materials/Equipments(Excluding supply of 11kV Switchgear) and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning

BIDDER'S NAME AND ADDRESS: TO,

The Chief General Manager(Tech), Corporate Office, KPTCL, Indhana Bhavan, BANGALORE - 560009

Following is the list of major supplied subsation equipments/accessories which are type tested and designed, manufactured by us in accordance with internationally recognised standards.

Sl. No. Item rating, type and Designation Qty Customer Date of Order Date of Supply Date of Commissioning Ref. of Cusomer's certificate of successful operation enclosed Ref. of layout & Customer's certificae for successful commission

Note: Documentary Proof in support of above shall be uploaded in the form of certificates issued by authorized officers of concerned organisations. .

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE - 9 (4 of 5) : QUALIFYING REQUIREMENTS

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3726

Combined Package for, Work-A: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Karaya Sub station in Belthangady Taluka , Dakshina Kannada District Work-B: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Konaje Sub station in Ullala Taluka , Dakshina Kannada District Work-C: Providing additional 1X20 MVA , 110/33 kV Transformer and 33 kV bay at 110/33/11 kV Nittur Sub Station in Udupi Taluka & District Work-D: Creation of 33 kV Reference by providing 2X20 MVA , 110/33 kV Power Transformer along with 33 kV Terminal Bays at 110 kV Karkala Sub Station in Karakala Taluka , Udupi District Work E- Replacement of 2X10 MVA, 110/11 kV Power Transformers by 2X20 MVA 110/11 kV Power Transformer along with providing additional 11 kV Switchgear and replacement of indoor type old, retrofitted 11 kV switchgear by new 11 kV MCVCB outdoor Switchgear at 110 kV Halady Sub Station in Kundapura Taluka, Udupi District Work F- Balance portion of works pertaining to work of construction of 1 No of 110 KV Terminal Bay for the 110 kV Karaya Line at the existing 110/33/11 KV Sub Station at Puttur in Puttur Taluka, Dakishna Kannada District. on Partial Turnkey Basis, including Supply of all Materials/Equipments(Excluding supply of 11kV Switchgear) and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning

Bidder's Name & Address alongwith GSTIN no. : To

The Chief General Manager(Tech), Corporate Office, KPTCL, Indhana Bhavan, BANGALORE - 560009

Section 3 : 1.7 Reports on the financial standing of the tenderer, such as Profit and Loss Statements and Auditor’s reports in the preceeding last five years, Audited Financial statements i.e Balance sheets, P&L statements, Turnover certificates duly certified by chartered Accountant as documentary evidence shall be uploaded.

SLNo. Particulars Year Bidder Consortium Member

Mention Year Turnover excluding GST (in Rs.) GST Amount (in case GST is included in Turnover) (in Rs.) Turnover including GST (in Rs.) Mention Year Turnover excluding GST (in Rs.) GST Amount (in case GST is included in Turnover) (in Rs.) Turnover including GST (in Rs.)

Names of the constituent Firm

1 Annual turn over for the last Five years Year(1) 2020-21 2020-21

2 Liquid Assets / Credit availability or access to evidence of assets

3 Whether Audited Balance sheets and Profit & Loss statement are enclosed for the last Five Years ? (yes/No)

4 Whether Bankers certificate enclosed for credit facilities? (Yes/No)

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE - 9 (5 of 5) : QUALIFYING REQUIREMENTS

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3726

Combined Package for, Work-A: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Karaya Sub station in Belthangady Taluka , Dakshina Kannada District Work-B: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Konaje Sub station in Ullala Taluka , Dakshina Kannada District Work-C: Providing additional 1X20 MVA , 110/33 kV Transformer and 33 kV bay at 110/33/11 kV Nittur Sub Station in Udupi Taluka & District Work-D: Creation of 33 kV Reference by providing 2X20 MVA , 110/33 kV Power Transformer along with 33 kV Terminal Bays at 110 kV Karkala Sub Station in Karakala Taluka , Udupi District Work E- Replacement of 2X10 MVA, 110/11 kV Power Transformers by 2X20 MVA 110/11 kV Power Transformer along with providing additional 11 kV Switchgear and replacement of indoor type old, retrofitted 11 kV switchgear by new 11 kV MCVCB outdoor Switchgear at 110 kV Halady Sub Station in Kundapura Taluka, Udupi District Work F- Balance portion of works pertaining to work of construction of 1 No of 110 KV Terminal Bay for the 110 kV Karaya Line at the existing 110/33/11 KV Sub Station at Puttur in Puttur Taluka, Dakishna Kannada District. on Partial Turnkey Basis, including Supply of all Materials/Equipments(Excluding supply of 11kV Switchgear) and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning

BIDDER'S NAME AND ADDRESS: TO,

The Chief General Manager(Tech), Corporate Office, KPTCL, IndhanaBhavan, BANGALORE - 560009

The information to be filled in by the Tenderer hereunder will be used for purposes of computing Tender capacity as provided for in Clause 3 of the Instructions to Tenderers. This information will not be incorporated in the Contract.

Lead Bidder Consortium partner

1.1 Constitution or legal status of Tenderer [Upload copy] Attach Copy

Place of Registration [Upload copy]

Principal place of business

Section - 3: 1.2 Total value of works executed (KPTCL & NON KPTCL works) and payments received in the last Five years (in Rs. Lakhs)

1.2 Total value of works executed (KPTCL & NON KPTCL works) and payments received in the last five years (in Rs. Lakhs) of both Lead Bidder & Consortium partner (in case of Consortium) Financial Year KPTCL works Non KPTCL works

Individual Bidder In case of Consortium Individual Bidder In case of Consortium

Total value of works in Rs. Lakh Lead Bidder Consortium Partner Total value of works in Rs. Lakh Lead Bidder Consortium Partner

Total value of works in Rs. Lakh Total value of works in Rs. Lakh Total value of works in Rs. Lakh Total value of works in Rs. Lakh

Note: Attach relevant Certificate/s from Chartered Accountant.

Section 3: 1.9 Name, address, telephone number & e-mail id of the Tenderers' bankers who may provide references if contacted by the Employer:

1.9 Sl.No Name, address, telephone number & e-mail id of the Tenderers' bankers

Section 3: 1.12 Information on litigations in which the Tenderer(Lead and Consortium Partner(in case of Consortium) is involved:

Other Party(ies) Employer Details of Dispute Amount involved Remarks showing Present Status

Consortium Partner

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE-10 (1 of 3) Details of Tools and Plants available

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3726

Combined Package for, Work-A: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Karaya Sub station in Belthangady Taluka , Dakshina Kannada District Work-B: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Konaje Sub station in Ullala Taluka , Dakshina Kannada District Work-C: Providing additional 1X20 MVA , 110/33 kV Transformer and 33 kV bay at 110/33/11 kV Nittur Sub Station in Udupi Taluka & District Work-D: Creation of 33 kV Reference by providing 2X20 MVA , 110/33 kV Power Transformer along with 33 kV Terminal Bays at 110 kV Karkala Sub Station in Karakala Taluka , Udupi District Work E- Replacement of 2X10 MVA, 110/11 kV Power Transformers by 2X20 MVA 110/11 kV Power Transformer along with providing additional 11 kV Switchgear and replacement of indoor type old, retrofitted 11 kV switchgear by new 11 kV MCVCB outdoor Switchgear at 110 kV Halady Sub Station in Kundapura Taluka, Udupi District Work F- Balance portion of works pertaining to work of construction of 1 No of 110 KV Terminal Bay for the 110 kV Karaya Line at the existing 110/33/11 KV Sub Station at Puttur in Puttur Taluka, Dakishna Kannada District. on Partial Turnkey Basis, including Supply of all Materials/Equipments(Excluding supply of 11kV Switchgear) and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning

BIDDER'S NAME AND ADDRESS: To

The Chief General Manager(Tech), Corporate Office, KPTCL, Indhana Bhavan, BANGALORE - 560009

Following are the details of the Tools and Plants available with us.

Sl. No. Description Quantity Make Present Location / Project Remarks (if any)

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE 10 (2 of 3) Details of Technical staff employed

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3726

Combined Package for, Work-A: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Karaya Sub station in Belthangady Taluka , Dakshina Kannada District Work-B: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Konaje Sub station in Ullala Taluka , Dakshina Kannada District Work-C: Providing additional 1X20 MVA , 110/33 kV Transformer and 33 kV bay at 110/33/11 kV Nittur Sub Station in Udupi Taluka & District Work-D: Creation of 33 kV Reference by providing 2X20 MVA , 110/33 kV Power Transformer along with 33 kV Terminal Bays at 110 kV Karkala Sub Station in Karakala Taluka , Udupi District Work E- Replacement of 2X10 MVA, 110/11 kV Power Transformers by 2X20 MVA 110/11 kV Power Transformer along with providing additional 11 kV Switchgear and replacement of indoor type old, retrofitted 11 kV switchgear by new 11 kV MCVCB outdoor Switchgear at 110 kV Halady Sub Station in Kundapura Taluka, Udupi District Work F- Balance portion of works pertaining to work of construction of 1 No of 110 KV Terminal Bay for the 110 kV Karaya Line at the existing 110/33/11 KV Sub Station at Puttur in Puttur Taluka, Dakishna Kannada District. on Partial Turnkey Basis, including Supply of all Materials/Equipments(Excluding supply of 11kV Switchgear) and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning

BIDDER'S NAME AND ADDRESS: To

The Chief General Manager(Tech), Corporate Office, KPTCL, Indhana Bhavan, BANGALORE - 560009

Section 3: 1.8 Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

Sl. No. Name of the employee Designation Branch (Degree/Diploma) Year of Passing Since when employed in erection division Past Experience

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE 10 (3 of 3 )

SHEET FOR TECHNOCOMMERCIAL OPENING

Combined Package for, Work-A: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Karaya Sub station in Belthangady Taluka , Dakshina Kannada District Work-B: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Konaje Sub station in Ullala Taluka , Dakshina Kannada District Work-C: Providing additional 1X20 MVA , 110/33 kV Transformer and 33 kV bay at 110/33/11 kV Nittur Sub Station in Udupi Taluka & District Work-D: Creation of 33 kV Reference by providing 2X20 MVA , 110/33 kV Power Transformer along with 33 kV Terminal Bays at 110 kV Karkala Sub Station in Karakala Taluka , Udupi District Work E- Replacement of 2X10 MVA, 110/11 kV Power Transformers by 2X20 MVA 110/11 kV Power Transformer along with providing additional 11 kV Switchgear and replacement of indoor type old, retrofitted 11 kV switchgear by new 11 kV MCVCB outdoor Switchgear at 110 kV Halady Sub Station in Kundapura Taluka, Udupi District Work F- Balance portion of works pertaining to work of construction of 1 No of 110 KV Terminal Bay for the 110 kV Karaya Line at the existing 110/33/11 KV Sub Station at Puttur in Puttur Taluka, Dakishna Kannada District. on Partial Turnkey Basis, including Supply of all Materials/Equipments(Excluding supply of 11kV Switchgear) and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3726

BIDDER'S NAME AND ADDRESS:

We propose the following deployment of manpower for the substation and Line package.

Sl. No. Category MONTHS AFTER PLACEMENT OF AWARD LETTER

1 Project manager

2 Sr. Project Manager

5 Skilled labour

6 No skilled labour

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE-11 (A) : COMPLETION SCHEDULE FOR STATION/TERMINAL BAYS

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3726

Combined Package for, Work-A: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Karaya Sub station in Belthangady Taluka , Dakshina Kannada District Work-B: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Konaje Sub station in Ullala Taluka , Dakshina Kannada District Work-C: Providing additional 1X20 MVA , 110/33 kV Transformer and 33 kV bay at 110/33/11 kV Nittur Sub Station in Udupi Taluka & District Work-D: Creation of 33 kV Reference by providing 2X20 MVA , 110/33 kV Power Transformer along with 33 kV Terminal Bays at 110 kV Karkala Sub Station in Karakala Taluka , Udupi District Work E- Replacement of 2X10 MVA, 110/11 kV Power Transformers by 2X20 MVA 110/11 kV Power Transformer along with providing additional 11 kV Switchgear and replacement of indoor type old, retrofitted 11 kV switchgear by new 11 kV MCVCB outdoor Switchgear at 110 kV Halady Sub Station in Kundapura Taluka, Udupi District Work F- Balance portion of works pertaining to work of construction of 1 No of 110 KV Terminal Bay for the 110 kV Karaya Line at the existing 110/33/11 KV Sub Station at Puttur in Puttur Taluka, Dakishna Kannada District. on Partial Turnkey Basis, including Supply of all Materials/Equipments(Excluding supply of 11kV Switchgear) and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning

Bidders Name and Address: To,

The Chief General Manager(Tech), Corporate Office, KPTCL,Indhana Bhavan, BANGALORE - 560009

We hereby declare that following schedules shall be followed by us for the above work. The period of various activities from the date of placement of award letter shall be as follows

SL.NO Activity STATION PORTION

Commencement Completion

1 Detailed engineering

2 Procurement of bought out items / raw materials

3 Manufacturing & Testing

5 Setting up of site office, Sheds & stores etc.

7 Concreting for

a)Structure Foundations

b)Equipment and mounting structure foundadions

c)Cable trenches

2. Installation

8 Receipt(at site) of

a)Main equipment / spares

c)Insulators & Hardwares

d)Clamps & Connectors

e)Marshalling kiosks

f)Cables & Cabling Materials

a)Main structures

b)Equipment support structures

10 Equipment Erection

12 Bus bar erection

15 Completion of testing and ready for commissioning

16 Commissioning

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE-11B : COMPLETION SCHEDULE FOR TRANSMISSION LINES

SHEET FOR TECHNOCOMMERCIAL OPENING

Combined Package for, Work-A: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Karaya Sub station in Belthangady Taluka , Dakshina Kannada District Work-B: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Konaje Sub station in Ullala Taluka , Dakshina Kannada District Work-C: Providing additional 1X20 MVA , 110/33 kV Transformer and 33 kV bay at 110/33/11 kV Nittur Sub Station in Udupi Taluka & District Work-D: Creation of 33 kV Reference by providing 2X20 MVA , 110/33 kV Power Transformer along with 33 kV Terminal Bays at 110 kV Karkala Sub Station in Karakala Taluka , Udupi District Work E- Replacement of 2X10 MVA, 110/11 kV Power Transformers by 2X20 MVA 110/11 kV Power Transformer along with providing additional 11 kV Switchgear and replacement of indoor type old, retrofitted 11 kV switchgear by new 11 kV MCVCB outdoor Switchgear at 110 kV Halady Sub Station in Kundapura Taluka, Udupi District Work F- Balance portion of works pertaining to work of construction of 1 No of 110 KV Terminal Bay for the 110 kV Karaya Line at the existing 110/33/11 KV Sub Station at Puttur in Puttur Taluka, Dakishna Kannada District. on Partial Turnkey Basis, including Supply of all Materials/Equipments(Excluding supply of 11kV Switchgear) and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3726

Bidders Name and Address: To,

The Chief General Manager(Tech), Corporate Office, KPTCL, Indhana' Bhavan, BANGALORE - 560009

We hereby declare that following shedules shall be followed by us for the above work. The period of various activities from the date of placement of award letter shall be as follows.

SL.NO Activity Construction of Transmission Line---VOID

Commencement Completion

1 Submission of Drawings

2 Completion of detailed engineering

3 Commencement of Manufacturing

4 Completion of Manufacturing VOID

5 Readiness for testing

6 Readiness for Shipment

7 Receipt at Site

8 Completion of Shipment

1 Detailed Survey

2 Setting up of site office, sheds and stores etc.

3 Exacavation for foundations.

4 Foundations and other Civil Works

5 Erection of Tower alongwith accessories

6 Stringing of conductor/ groundwire alongwith accessories

7 Testing , Commissioning and Handing over.

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 12 TYPE TESTS & TEST CHARGES OF EQUIPMENT/MATERIALS

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3726

Combined Package for, Work-A: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Karaya Sub station in Belthangady Taluka , Dakshina Kannada District Work-B: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Konaje Sub station in Ullala Taluka , Dakshina Kannada District Work-C: Providing additional 1X20 MVA , 110/33 kV Transformer and 33 kV bay at 110/33/11 kV Nittur Sub Station in Udupi Taluka & District Work-D: Creation of 33 kV Reference by providing 2X20 MVA , 110/33 kV Power Transformer along with 33 kV Terminal Bays at 110 kV Karkala Sub Station in Karakala Taluka , Udupi District Work E- Replacement of 2X10 MVA, 110/11 kV Power Transformers by 2X20 MVA 110/11 kV Power Transformer along with providing additional 11 kV Switchgear and replacement of indoor type old, retrofitted 11 kV switchgear by new 11 kV MCVCB outdoor Switchgear at 110 kV Halady Sub Station in Kundapura Taluka, Udupi District Work F- Balance portion of works pertaining to work of construction of 1 No of 110 KV Terminal Bay for the 110 kV Karaya Line at the existing 110/33/11 KV Sub Station at Puttur in Puttur Taluka, Dakishna Kannada District. on Partial Turnkey Basis, including Supply of all Materials/Equipments(Excluding supply of 11kV Switchgear) and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning

BIDDERS SHALL INDICATE VARIOUS TYPE TESTS IN LIGHT BLUE COLOURED CELLS

ALL THE TYPE TESTS APPLICABLE FOR EACH OF THE EQUIPMENTS SHALL BE INCLUDED.

Bidders Name and Address To,

The Chief General Manager(Tech), Corporate Office, KPTCL, Indhana Bhavan, BANGALORE - 560009

SL.No Details of Equipments Type Test Test Charges ( in Rs )

1 Power Transformers:

2 SF6 Circuit Breakers:

3 Surge Arrestors

5 Control & Relay Panels / Relay & Protection Panels

6 L.T. A.C Panel

7 Station Battery

8 Station Battery Charger

9 1.1KV Power Cables

10 1.1kV Copper Control cables

11 11kV U.G Cable

12 Insulators a) 90KN Disc Insulator Strings

13 Equipment / Station Structures

14 Aluminium pipe and Clamps

15 Hardware Materials

16 Yard lighting equipments

17 Fire Fighting equipments

18 AC DISTRIBUTION BOX

19 DC DISTRIBUTION BOX

21 Auxiliary Transformer

NOTE: The Type Test / Special Tests, if repeated at the insistance of owner, the applicable testing charges shall be paid by the successful Bidder upfront to the laboratory and the same shall be reimbursable by KPTCL as per actuals on submission of Bills along with proof of payment and on successful completion of all the Type Tests, specified and on approval of the same by the owner. In case equipment/material fails in the type tests during testing then the testing charges paid by the Bidder to the laboratory will not be reimbursed by KPTCL. The above Clause is applicable for all the equipments/materials, in case, the Type Test / Special Tests, are repeated at the insistance of owner(KPTCL).

Place Printed Name

Karnataka Power Transmission Corporation Limited

Schedule -13-List of Optional Spares

SHEET FOR TECHNOCOMMERCIAL OPENING

Combined Package for, Work-A: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Karaya Sub station in Belthangady Taluka , Dakshina Kannada District Work-B: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Konaje Sub station in Ullala Taluka , Dakshina Kannada District Work-C: Providing additional 1X20 MVA , 110/33 kV Transformer and 33 kV bay at 110/33/11 kV Nittur Sub Station in Udupi Taluka & District Work-D: Creation of 33 kV Reference by providing 2X20 MVA , 110/33 kV Power Transformer along with 33 kV Terminal Bays at 110 kV Karkala Sub Station in Karakala Taluka , Udupi District Work E- Replacement of 2X10 MVA, 110/11 kV Power Transformers by 2X20 MVA 110/11 kV Power Transformer along with providing additional 11 kV Switchgear and replacement of indoor type old, retrofitted 11 kV switchgear by new 11 kV MCVCB outdoor Switchgear at 110 kV Halady Sub Station in Kundapura Taluka, Udupi District Work F- Balance portion of works pertaining to work of construction of 1 No of 110 KV Terminal Bay for the 110 kV Karaya Line at the existing 110/33/11 KV Sub Station at Puttur in Puttur Taluka, Dakishna Kannada District. on Partial Turnkey Basis, including Supply of all Materials/Equipments(Excluding supply of 11kV Switchgear) and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3726

BIDDERS SHALL NOTE THAT QUANTITIES INDICATED IN THE ITEM_WISE PERCENTAGE WISE FINANCIAL BID OFFER SHALL BE INDICATED HERE ALSO.

Bidders Name and Address

To, The Chief General Manager(Tech), Corporate Office, KPTCL, Indhana Bhavan, BANGALORE - 560009

List of optional spares required to meet the specified performance for a period of three years---Void

Sl. No. For Equipments Details of item Unit Quantity

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 14-Guaranteed Losses :

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3726

Combined Package for, Work-A: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Karaya Sub station in Belthangady Taluka , Dakshina Kannada District Work-B: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Konaje Sub station in Ullala Taluka , Dakshina Kannada District Work-C: Providing additional 1X20 MVA , 110/33 kV Transformer and 33 kV bay at 110/33/11 kV Nittur Sub Station in Udupi Taluka & District Work-D: Creation of 33 kV Reference by providing 2X20 MVA , 110/33 kV Power Transformer along with 33 kV Terminal Bays at 110 kV Karkala Sub Station in Karakala Taluka , Udupi District Work E- Replacement of 2X10 MVA, 110/11 kV Power Transformers by 2X20 MVA 110/11 kV Power Transformer along with providing additional 11 kV Switchgear and replacement of indoor type old, retrofitted 11 kV switchgear by new 11 kV MCVCB outdoor Switchgear at 110 kV Halady Sub Station in Kundapura Taluka, Udupi District Work F- Balance portion of works pertaining to work of construction of 1 No of 110 KV Terminal Bay for the 110 kV Karaya Line at the existing 110/33/11 KV Sub Station at Puttur in Puttur Taluka, Dakishna Kannada District. on Partial Turnkey Basis, including Supply of all Materials/Equipments(Excluding supply of 11kV Switchgear) and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning

Bidders Name and Address along with GSTIN No.: To,

The Chief General Manager(Tech), Corporate Office, KPTCL, Indhana Bhavan, BANGALORE - 560009

Dear Sir, i) We Declare that the ratings and performance figures of the transformer furnished by us under the Turnkey Package are Guaranteed. We further declare that in the event of any deficiencies in meeting the guarantees in repect of the characteristics mentioned below as established after conducting the factory test, you may at your discretion,reject or accept the equipment after assessing the liquidated damages as specified in relevant clause of Bid Document.

Equipment Guaranteed Losses at rated output(KW)

Max No Load loss at rated voltage and rated frequency Max Load loss at rated current and frequency and at 75 deg C at principal tap Max I2 R loss at rated current and frequency and at 75 deg C at principal tap Max Auxiliary loss at rated voltage and frequency for Power Transformer

20 MVA, 110/33-11kV Power Transformer

Note:(i) Refer Technical Specifications (ii)The loss quoted shall be consistent in Schedule 14 and GTPs(DRS)of Power Transformer

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

LIST OF VENDORS

SHEET FOR TECHNOCOMMERCIAL OPENING

Combined Package for, Work-A: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Karaya Sub station in Belthangady Taluka , Dakshina Kannada District Work-B: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Konaje Sub station in Ullala Taluka , Dakshina Kannada District Work-C: Providing additional 1X20 MVA , 110/33 kV Transformer and 33 kV bay at 110/33/11 kV Nittur Sub Station in Udupi Taluka & District Work-D: Creation of 33 kV Reference by providing 2X20 MVA , 110/33 kV Power Transformer along with 33 kV Terminal Bays at 110 kV Karkala Sub Station in Karakala Taluka , Udupi District Work E- Replacement of 2X10 MVA, 110/11 kV Power Transformers by 2X20 MVA 110/11 kV Power Transformer along with providing additional 11 kV Switchgear and replacement of indoor type old, retrofitted 11 kV switchgear by new 11 kV MCVCB outdoor Switchgear at 110 kV Halady Sub Station in Kundapura Taluka, Udupi District Work F- Balance portion of works pertaining to work of construction of 1 No of 110 KV Terminal Bay for the 110 kV Karaya Line at the existing 110/33/11 KV Sub Station at Puttur in Puttur Taluka, Dakishna Kannada District. on Partial Turnkey Basis, including Supply of all Materials/Equipments(Excluding supply of 11kV Switchgear) and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3726

BIDDERS NAME AND ADDRESS To, The Chief General Manager(Tech), Corporate Office, KPTCL, Indhana Bhavan, BANGALORE - 560009

Sl. No. EQUIPMENT/ MATERIAL NAME OF THE VENDOR

VENDOR 1 VENDOR 2 VENDOR 3 VENDOR 4

1 Power Transformer 20MVA,66/-11kV Transformer

2 SF6 Circuit Breakers: 145kV

3 SURGE ARRESTERS

4 Control & Relay Panels / Relay & Protection PANELS

5 Station / Equipment Support structures

6 Aluminium pipe and Clamps

7 ACSR CONDUCTOR

9 Solid Core Insulator

10 Disc Insulator Strings

11 Insulator Hardware Clamps & Power connectors

12 Auxiliary Transformer

14 1.1kV POWER CABLES

15 AC DISTRIBUTION BOX

16 DC DISTRIBUTION BOX

18 BATTERY CHARGER

19 CONTROL CABLES

20 11KV Switchgear

21 11kV UG CABLE

22 FIRE FIGHTING EQUIPMENTS

23 Illumination Equipments / Fixtures

25 Tower Accessories

26 Insulator Hard Wares

27 Conductor Accessories

28 Earth Wire Accessories

Note : Any Other Materials name & its vendors are to be entered.

Place Designation

Name of the Company

SCHEDULE-16 : NO DEVIATION CERTIFICATE (ANNEXURE-I)

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3726

Combined Package for, Work-A: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Karaya Sub station in Belthangady Taluka , Dakshina Kannada District Work-B: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Konaje Sub station in Ullala Taluka , Dakshina Kannada District Work-C: Providing additional 1X20 MVA , 110/33 kV Transformer and 33 kV bay at 110/33/11 kV Nittur Sub Station in Udupi Taluka & District Work-D: Creation of 33 kV Reference by providing 2X20 MVA , 110/33 kV Power Transformer along with 33 kV Terminal Bays at 110 kV Karkala Sub Station in Karakala Taluka , Udupi District Work E- Replacement of 2X10 MVA, 110/11 kV Power Transformers by 2X20 MVA 110/11 kV Power Transformer along with providing additional 11 kV Switchgear and replacement of indoor type old, retrofitted 11 kV switchgear by new 11 kV MCVCB outdoor Switchgear at 110 kV Halady Sub Station in Kundapura Taluka, Udupi District Work F- Balance portion of works pertaining to work of construction of 1 No of 110 KV Terminal Bay for the 110 kV Karaya Line at the existing 110/33/11 KV Sub Station at Puttur in Puttur Taluka, Dakishna Kannada District. on Partial Turnkey Basis, including Supply of all Materials/Equipments(Excluding supply of 11kV Switchgear) and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning

NOTE: SCHEDULE DULY SIGNED BY THE AUTHORIZED PERSON SHALL BE UPLOADED

With reference to our Bid Proposal No dated

We hereby confirm that we have read the provisions of the contract, the stipulation of these clause are acceptable to us,

and we have not taken any deviation whatsoever to these clauses:

a) Terms of payment Clause No. 37 of Section-5,Conditions of Contract (CC) and Clause No.8 of Special Conditions of Contrac (SCC)

b) EMD/Bid Security Clause No. 6, Section :1, Invitation for Tenders (IFT) and Clause No. 13, Section :2, Instruction to Tenderer (ITT)

c) Contract Performance Guarantee Clause No. 29 of Section:2, Instruction to Tenderers (ITT).

d) Penalty for delay Clause No. 41 of Section-5 : Conditions of Contract (CC).

e) Price Basis/ Price adjustment Clause No. 40 of Section-5 :Conditions of Contract (CC).

f) Defects Liability Period/Guarantee Clause No. 10 of Section-5 Special Conditions of Contract (SCC)

g) Work Schedule Clause No.17 of Section:5 Conditions of Contract (CC)

h) Taxes and Duties Clause No. 11.11 of Section-2: Instruction to Tenderers (ITT).

We further confirm that any deviation to the above clauses at SI.No. (a) to (h) found anywhere in our bid proposal, implicit or explicit, shall stand unconditionally withdrawn, without any cost implication whatsoever to KPTCL.

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE-17a FORM FOR BID SECURITY/EMD (ANNEXURE-II) (To be stamped on Rs.300/- Non-Judicial stamp paper in accordance with KPTCL Circular No. KPTCL/GMT/CIVIL (B7)/35/2024-MANAGER ESTATE (E-106992) dated 02.03.2024)

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3726

Combined Package for, Work-A: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Karaya Sub station in Belthangady Taluka , Dakshina Kannada District Work-B: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Konaje Sub station in Ullala Taluka , Dakshina Kannada District Work-C: Providing additional 1X20 MVA , 110/33 kV Transformer and 33 kV bay at 110/33/11 kV Nittur Sub Station in Udupi Taluka & District Work-D: Creation of 33 kV Reference by providing 2X20 MVA , 110/33 kV Power Transformer along with 33 kV Terminal Bays at 110 kV Karkala Sub Station in Karakala Taluka , Udupi District Work E- Replacement of 2X10 MVA, 110/11 kV Power Transformers by 2X20 MVA 110/11 kV Power Transformer along with providing additional 11 kV Switchgear and replacement of indoor type old, retrofitted 11 kV switchgear by new 11 kV MCVCB outdoor Switchgear at 110 kV Halady Sub Station in Kundapura Taluka, Udupi District Work F- Balance portion of works pertaining to work of construction of 1 No of 110 KV Terminal Bay for the 110 kV Karaya Line at the existing 110/33/11 KV Sub Station at Puttur in Puttur Taluka, Dakishna Kannada District. on Partial Turnkey Basis, including Supply of all Materials/Equipments(Excluding supply of 11kV Switchgear) and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning

NOTE: SCHEDULE DULY SIGNED BY THE AUTHORIZED PERSON SHALL BE UPLOADED AND SENT ALONG WITH ORIGINAL BANK GUARANTEE AND ORIGINAL DD (TOWARDS BID GUARANTEE ) TO CHIEF GENERAL MANAGER (TECH),KPTCL BANGALORE SO AS TO REACH AFTER THE LAST SUBMISSION DATE & ON OR BEFORE THE DATE & TIME OF OPENING TECHNO COMMERCIAL BIDS.

Ref No. Bank Guarantee No.

In accordance with Invitation to Bid under your specification

No. M/s having its Registered /

Head Office at (hereinafter called the 'Bidder') wish

to participate in the said Bid or and you, as a special favour have agreed

to accept an irrevocable and unconditional bank guarantee for an amount of

valid up to on behalf of Bidder in lieu of the Bid deposit required to be made

by the Bidder as a condition predecent for participation in the said Bid,in addition to the Demand draft No.

we the Bank at having our Head office at

(local address) guarantee and undertake to pay immediately on demand by Karnataka Power Transmission Corporation

the amount of (in figures and words)

without any reservation, protest, demur and recourse. Any such demand made by said `Owner' shall be conclusive and binding on us irrespective of any dispute or difference raised by the Bidder.

This Guarantee shall be irrevocable and shall remain valid up to and including

If any further extension of this guarantee is required, the same shall be extended to such required period (not exceeding one year) on receiving instructions

from M/s on whose behalf this guarantee is issued.

This Guarantee has been issued using SFMS Platform and the requisite communication in this regard has been forwarded to the Beneficiary Bank.

In witness whereof the Bank, through its authorised officer, has set its hand and stamp on this

Signature Signature

Official Addressess Designation with Bank Stamp.

Attorney as per Power of Attorney No.

Note : 1) Both the Bank Guarantee and Demand Draft shall be scanned and uploaded along with Electronic sheets. 2) This date shall be Forty Five (45) days after the last date for which the bid is valid.

Karnataka Power Transmission Corporation Limited

SCHEDULE-17b FORM FOR BID SECURITY/EMD (ANNEXURE-II) (To be stamped on Rs.300/- Non-Judicial stamp paper in accordance with KPTCL Circular No. KPTCL/GMT/CIVIL (B7)/35/2024-MANAGER ESTATE (E-106992) dated 02.03.2024)

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3726

Combined Package for, Work-A: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Karaya Sub station in Belthangady Taluka , Dakshina Kannada District Work-B: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Konaje Sub station in Ullala Taluka , Dakshina Kannada District Work-C: Providing additional 1X20 MVA , 110/33 kV Transformer and 33 kV bay at 110/33/11 kV Nittur Sub Station in Udupi Taluka & District Work-D: Creation of 33 kV Reference by providing 2X20 MVA , 110/33 kV Power Transformer along with 33 kV Terminal Bays at 110 kV Karkala Sub Station in Karakala Taluka , Udupi District Work E- Replacement of 2X10 MVA, 110/11 kV Power Transformers by 2X20 MVA 110/11 kV Power Transformer along with providing additional 11 kV Switchgear and replacement of indoor type old, retrofitted 11 kV switchgear by new 11 kV MCVCB outdoor Switchgear at 110 kV Halady Sub Station in Kundapura Taluka, Udupi District Work F- Balance portion of works pertaining to work of construction of 1 No of 110 KV Terminal Bay for the 110 kV Karaya Line at the existing 110/33/11 KV Sub Station at Puttur in Puttur Taluka, Dakishna Kannada District. on Partial Turnkey Basis, including Supply of all Materials/Equipments(Excluding supply of 11kV Switchgear) and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning

Ref No. Insurance Surety Bond No.

In accordance with Invitation for Bids under your Bid Document No

M/s having its Registered /

Head Office at (hereinafter called the 'Contractor') wish

to participate in the said Bid for

As an irrevocable Insurance Surety Bond against Bid Security for an amount of * valid for days from **

required to be submitted by the Contractor as a condition precedent for participation in the said bid which amount is liable to be forfeited on the happening of any contingencies as mentioned under the Bidding Documents.

we, the having our Head office at

guarantee and undertake to pay immediately on demand by Karnataka Power Transmission Corporation Limited, (hereinafter called the 'Owner') the amount of

without any reservation, protest, demand and recourse. Any such demand made by the 'Owner' shall be conclusive and binding on us irrespective

of any dispute or difference raised by the Contractor and/or any right/remedy available to the Contractor in terms thereof.

This Insurance Surety Bond shall be unconditional as well as irrevocable and shall remain valid upto

If any further extension of this Insurance Surety Bond is required, the same shall be extended to such required period (not exceeding one year) on receiving instructions from

M/s on whose behalf this Insurance Surety Bond is issued.

In witness where of the Insurer, through its authorised officer, has set its hand and stamp on this

Signature Signature

Official Addressess Designation with Insurer Stamp

Attorney as per Power of Attorney No.

NOTE: 1. (*) The amount shall be as specified in the SPC. (**) This shall be the last date of bid submission deadline. (@) This date shall be Forty Five (45) days after the last date for which the bid is valid 2. The Insurance Surety Bond shall be from an Insurer as per guidelines issued by Insurance Regulatory and Development Authority of India (IRDAI) as amended from time to time. 3. The Owner shall be the Creditor, the Contractor shall be the Principal debtor and the Insurance company/Insurer shall be the Surety in respect of the Insurance Surety Bond to be issued by the Insurer. 4. The Insurance Surety Bond should be on Non-Judicial stamp paper/e-stamp paper of appropriate value as per Stamp Act prevailing in the state(s) where the Insurance Surety Bond is submitted or is to be acted upon or the rate prevailing in State where the Insurance Surety Bond is executed, whichever is higher. The Stamp Paper/e- stamp paper shall be purchased in the name of Contractor /Insurer issuing the Insurance Surety Bond. 5. While getting the Insurance Surety Bond issued, Contractors are required to ensure compliance to the points mentioned in Form of Bank Guarantee/Insurance Surety Bond Verification Check List enclosed in this Section of Bidding Documents. Further, Contractors are required to fill up this Form and enclose the same with the Insurance Surety Bond.

Karnataka Power Transmission Corporation Limited

SCHEDULE-18 PROFORMA OF LETTER OF UNDERTAKINGS (ANNEXURE-V)

SHEET FOR TECHNOCOMMERCIAL OPENING

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3726

Combined Package for, Work-A: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Karaya Sub station in Belthangady Taluka , Dakshina Kannada District Work-B: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Konaje Sub station in Ullala Taluka , Dakshina Kannada District Work-C: Providing additional 1X20 MVA , 110/33 kV Transformer and 33 kV bay at 110/33/11 kV Nittur Sub Station in Udupi Taluka & District Work-D: Creation of 33 kV Reference by providing 2X20 MVA , 110/33 kV Power Transformer along with 33 kV Terminal Bays at 110 kV Karkala Sub Station in Karakala Taluka , Udupi District Work E- Replacement of 2X10 MVA, 110/11 kV Power Transformers by 2X20 MVA 110/11 kV Power Transformer along with providing additional 11 kV Switchgear and replacement of indoor type old, retrofitted 11 kV switchgear by new 11 kV MCVCB outdoor Switchgear at 110 kV Halady Sub Station in Kundapura Taluka, Udupi District Work F- Balance portion of works pertaining to work of construction of 1 No of 110 KV Terminal Bay for the 110 kV Karaya Line at the existing 110/33/11 KV Sub Station at Puttur in Puttur Taluka, Dakishna Kannada District. on Partial Turnkey Basis, including Supply of all Materials/Equipments(Excluding supply of 11kV Switchgear) and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning

NOTE: SCHEDULE DULY SIGNED BY THE AUTHORIZED PERSON SHALL BE UPLOADED

(To be executed on Non-Judicial paper of RequisiteValue)

1. I*/We* have read and examined the following bid documents relating to the

(full Scope of Work)

a) Notice Inviitng Tender

b) Conditions of Contract containing section 'Invitation for Tenders’, 'Instructions to Tenderers’, ‘Conditions of Contract’ and Contract Data.

c) Special Conditions of Contract along with Annexure to

d) Drawings No.

e) Technical Specifications

2 . I / We hereby submit our Bid and undertake to keep our Bid Valid for a period of One Hundred and Eighty days (180 days) from the Last date of bid submission as notified (either original or extended). I*/We* hereby further undertake that during said period I/We shall not vary/alter or revoke my/our Bid.

This undertaking is in consideration of KPTCL agreeing to open my/ our Bid and consider and evaluate the same for the purpose of award of Work in terms of provisions of clause entitled "Award of Construct" 'cl.no. 26 of Section ITT and cl.no. 18 of SCC of the Bid Documents.

Should this bid be accepted, I*/We* also agree to abide by and fulfil all the terms, conditions of provision of the above mentioned bid.

Signature along with Seal of Co.

(Duly Authorised to sign the Tender on Behalf of the Contractor.)

NAME OF THE COMPANY (in Block Letters)

SIGNATURE Date and Postal Address

DATE Telegraphic Address

NAME AND ADDRESS Telephone No.

Karnataka Power Transmission Corporation Limited

SCHEDULE-19 CONSORTIUM AGREEMENT (To be stamped on Rs.500/- Non Judicial stamp paper in accordance with KPTCL Circular No. KPTCL/GMT/CIVIL(B7)/35/2024-MANAGER ESTATE (E-106992) dated 02.03.2024) (ANNEXURE -XIII)

Combined Package for, Work-A: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Karaya Sub station in Belthangady Taluka , Dakshina Kannada District Work-B: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Konaje Sub station in Ullala Taluka , Dakshina Kannada District Work-C: Providing additional 1X20 MVA , 110/33 kV Transformer and 33 kV bay at 110/33/11 kV Nittur Sub Station in Udupi Taluka & District Work-D: Creation of 33 kV Reference by providing 2X20 MVA , 110/33 kV Power Transformer along with 33 kV Terminal Bays at 110 kV Karkala Sub Station in Karakala Taluka , Udupi District Work E- Replacement of 2X10 MVA, 110/11 kV Power Transformers by 2X20 MVA 110/11 kV Power Transformer along with providing additional 11 kV Switchgear and replacement of indoor type old, retrofitted 11 kV switchgear by new 11 kV MCVCB outdoor Switchgear at 110 kV Halady Sub Station in Kundapura Taluka, Udupi District Work F- Balance portion of works pertaining to work of construction of 1 No of 110 KV Terminal Bay for the 110 kV Karaya Line at the existing 110/33/11 KV Sub Station at Puttur in Puttur Taluka, Dakishna Kannada District. on Partial Turnkey Basis, including Supply of all Materials/Equipments(Excluding supply of 11kV Switchgear) and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3726

NOTE: SCHEDULE DULY SIGNED BY THE AUTHORIZED PERSON SHALL BE UPLOADED INKPPP PORTAL.

CONSORTIUM AGREEMENT AMONGST M/s M/s

For Bid Specification No. OF KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

This consortium agreement executed on this day Month of Two thousand Twenty Five

amongst M/s a company incorporated under the laws of (Country) and having its registered office at

(hereinafter called the "Lead Company" which expression shall include its successors ,executors and permitted assigns),

M/s a company incorporated under the laws of (Country) and having its registered office at

(hereinafter called the "Constituent Company" which expressions shall include its successors,executors and permitted assigns)

for the purpose of making a bid and entering into a contract (In case of award) against the specification no.

For NAME OF THE WORK

for Karnataka Power Transmission Corporation Ltd. having its registered office at Kaveri Bhavan , Bangalore 560 009 , Karnataka (hereinafter called the "Owner"). The leader of the consortium shall abide by the general terms and conditions specified by the Purchaser. WHEREAS the Owner invited bids as per the above mentioned specifications for the design, manufacture, supply and erection, testing and commissioning of Equipments/Materials stipulated in the bidding documents under subject package

NAME OF THE WORK

AND WHEREAS Section-I ( Volume-1: Clause No. 11:- Qualifying Requirement), forming part of the bidding documents, stipulates that a consortium meeting the requirements of Section-I, ( Invitation of Bid) applicable may bid, provided the Consortium fulfills all other requirements of specification and in such a case, the Bid shall be signed by the members so as to legally bind the members and who will be jointly and severally liable to perform the Contract and all obligations hereunder.

The above clause further states that the consortium agreement shall be attached to the bid and the contract performance guarantee will be as per the format enclosed with the bidding document without any restriction or liability for either party.

AND WHEREAS the bid has been submitted to the Owner vide proposal No dated

by Lead Company based on the Constituent agreement between all the consortium under these presents and the bid in accordance with the requirements of Specifications (Qualification Requirements).

NOW THEREFORE THIS UNDERTAKING WITNESSETH AS UNDER:

In consideration of the above premises and agreements all the partners to this consortium members do hereby now agree as follows:

1 In Consideration of the award of the Contract by the Owner to the Consortium members, we , the members to the consortium agreement do hereby agree that M/s

shall act as Lead Company and further declare and confirm that we shall jointly and severally be bound up to the Owner for the successful performance of the contract and shall be fully responsible for the design, manufacture, supply and successful performance of the equipments in accordance with the Contract.

2 In case of any breach of the said contract by the Lead company or other constituent of the Consortium agreement, the Lead company do hereby agree to be fully responsible for the successful performance of the contract and to carryout all the obligations and responsibilities under the contract in accordance with the requirements of the Contract

3 Further, if the Owner suffers any loss or damage on account of any breach in the contract or any shortfall in the performance of the equipment in meeting the performance guaranteed as per the specification in terms of the contract, the Lead company of these presents undertake to promptly make good such loss or damages caused to the Owner, on its demand without any demur. It shall not be necessary or obligatory for the Owner to proceed against Lead Partner to these presents before proceeding against or dealing with the other Partner (s).

4 The Financial liability of the members of the consortium agreement to the Owner, with respect to any of the claims arising out of performance or non-performance of the obligations set forth in the said agreement, read in conjunction with the relevant conditions of the contract shall, however not be limited in any way so as to restrict or limit the liabilities of any of the members of the agreement.

5 It is expressly understood and agreed between the members to this consortium agreement that the responsibilities and obligations of each of the partners shall be as delineated hereunder (To be incorporated suitably by the member to this agreement). However, each member of the consortium will be severally and jointly responsible for the faithful performance of the contract. It is further agreed by the member that the above sharing of responsibilities and obligations shall not in any way be a limitation of joint and several responsibilities of the members under this contract.

Sl.No. Name of the Lead Bidder/Consortium Partner. Scope of the work/Participation

We further declare ourselves bound to execute our scope of work/participation as stated above;

6 This Consortium agreement shall be constructed and interpreted in accordance with the laws of India and the courts of Bangalore shall have the exclusive jurisdiction in all matters arising there under.

7 7) In case of an award of a Contract, we the Consortium members do hereby agree that we shall be jointly & severally responsible for the works respectively executed and Lead company shall furnishing a contract performance security from a bank/Insurer in favor of the PURCHASER in the forms acceptable to purchaser for value of Five percent (5%) of the Amount put to tender (Excluding GST) plus additional security for unbalanced tenders in accordance with Clause 29 of Instructions To Tenderers (ITT).

8 It is further agreed that the Consortium agreement shall be irrevocable and shall form an integral part of the contract, and shall continue to be enforceable till the owner discharges the same. It shall be effective from the date first mentioned above for all purposes and intents.

IN WITNESS WHEREOF the partners to the Consortium have through their authorized representatives executed these presents and affixed Common seals of their companies, on the day, month and year first mentioned above.

WITNESS for Lead Company

(Signature) (Signature of the authorized representative)

(Name in Block Letters) (Name)

Designation (Designation)

Common Seal of the Company

2 ( For Constituent 1)

(Signature of the authorized representative)

(Name in Block Letters) (Name)

Designation Common Seal of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE-20a POWER OF ATTORNEY (ANNEXURE-XI)

(For Individual Bidder or Lead Parnter of Consortium)

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3726

Combined Package for, Work-A: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Karaya Sub station in Belthangady Taluka , Dakshina Kannada District Work-B: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Konaje Sub station in Ullala Taluka , Dakshina Kannada District Work-C: Providing additional 1X20 MVA , 110/33 kV Transformer and 33 kV bay at 110/33/11 kV Nittur Sub Station in Udupi Taluka & District Work-D: Creation of 33 kV Reference by providing 2X20 MVA , 110/33 kV Power Transformer along with 33 kV Terminal Bays at 110 kV Karkala Sub Station in Karakala Taluka , Udupi District Work E- Replacement of 2X10 MVA, 110/11 kV Power Transformers by 2X20 MVA 110/11 kV Power Transformer along with providing additional 11 kV Switchgear and replacement of indoor type old, retrofitted 11 kV switchgear by new 11 kV MCVCB outdoor Switchgear at 110 kV Halady Sub Station in Kundapura Taluka, Udupi District Work F- Balance portion of works pertaining to work of construction of 1 No of 110 KV Terminal Bay for the 110 kV Karaya Line at the existing 110/33/11 KV Sub Station at Puttur in Puttur Taluka, Dakishna Kannada District. on Partial Turnkey Basis, including Supply of all Materials/Equipments(Excluding supply of 11kV Switchgear) and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning

NOTE: SCHEDULE DULY SIGNED BY THE AUTHORIZED PERSON SHALL BE UPLOADED.

POWER OF ATTORNEY

(To be stamped on Rs.500/- Non Judicial stamp paper in accordance with KPTCL Circular No. KPTCL/GMT/CIVIL (B7)/35/2024-MANAGER ESTATE (E-106992) dated 02.03.2024)

KNOW ALL MEN BY THESE PRESENTS that we

a Company incorporated

under the laws of

and having its Registered Office / Head Office at

"Manufacturer / Bidder" which expression shall unless repugnant to the

Context or meanig thereof, include its successors, administrators and assigns)

acting through Mr its constitute, nominate and appoint

M/s a Company incorporated under the laws of

and having its Registered / Head Office at

as its duly constituted lawful Attorney (hereinafter called "Attorney"

or "Authorized Representative") to exercise all or any of the powers for and on

behalf of the "Manufacturer / Bidder" in regard to Specification No.

the bids for which have been invited by

(Address "Owner") to undertake the following acts:

i. To submit proposal and participate in the aforesaid Bid Specification of the Owner on behalf of the "Manufacturer / Bidder".

ii. To negotiate with the "Owner" the terms and conditions including price for award of the contract pursuant to the aforesaid Bid and to sign the contract with the "Owner" for and on behalf of the Manufacturer / Bidder.

iii. To receive accept and execute the contract for and on behalf of the "Manufacturer / Bidder".

iv. To do any other act or submit any document related to the above.

It is expressly understood that the Power of Attorney shall remain valid, binding and irrecoverable till submission of the Contract performance guarantee in terms of the Contract. The "Manufacturer / Bidder" hereby agrees and undertakes to ratify and confirm all the whatsoever the said "Attorney" / "Authorised Representative" quotes in the Bid, negotiates and signs the contract with the "Owner" and / or purports to act on behalf of the "Manufacturer / Bidder" by virtue of this Power of Attorney and the same shall bind the "Manufacturer / Bidder" as if done by itself.

IN WITNESS WHEREOF THE "Manufacturer / Bidder" has executed these presents at

on this day of under

the Common Seal of the Manufacturer company / Bidder.

Specimen Signature of Attorney Holder

(Name & Designation)

For and on behalf of

Common Seal of the above Manufacturer/Bidder

Has been affixed thereto in the presence of :

Karnataka Power Transmission Corporation Limited

SCHEDULE-20(b) POWER OF ATTORNEY (ANNEXURE-XV)

(FOR CONSORTIUM MEMBER)

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3726

Combined Package for, Work-A: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Karaya Sub station in Belthangady Taluka , Dakshina Kannada District Work-B: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Konaje Sub station in Ullala Taluka , Dakshina Kannada District Work-C: Providing additional 1X20 MVA , 110/33 kV Transformer and 33 kV bay at 110/33/11 kV Nittur Sub Station in Udupi Taluka & District Work-D: Creation of 33 kV Reference by providing 2X20 MVA , 110/33 kV Power Transformer along with 33 kV Terminal Bays at 110 kV Karkala Sub Station in Karakala Taluka , Udupi District Work E- Replacement of 2X10 MVA, 110/11 kV Power Transformers by 2X20 MVA 110/11 kV Power Transformer along with providing additional 11 kV Switchgear and replacement of indoor type old, retrofitted 11 kV switchgear by new 11 kV MCVCB outdoor Switchgear at 110 kV Halady Sub Station in Kundapura Taluka, Udupi District Work F- Balance portion of works pertaining to work of construction of 1 No of 110 KV Terminal Bay for the 110 kV Karaya Line at the existing 110/33/11 KV Sub Station at Puttur in Puttur Taluka, Dakishna Kannada District. on Partial Turnkey Basis, including Supply of all Materials/Equipments(Excluding supply of 11kV Switchgear) and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning

NOTE: SCHEDULE DULY SIGNED BY THE AUTHORIZED PERSON SHALL BE UPLOADED

POWER OF ATTORNEY

(To be stamped on Rs.500/- Non Judicial stamp paper in accordance with KPTCL Circular No. KPTCL/GMT/CIVIL (B7)/35/2024-MANAGER ESTATE (E-106992) dated 02.03.2024)

KNOW ALL MEN BY THESE PRESENTS that we

a Company incorporated

under the laws of

and having its Registered Office / Head Office at

"Manufacturer / Bidder" which expression shall unless repugnant to the

Context or meanig thereof, include its successors, administrators and assigns)

acting through Mr its constitute, nominate and appoint

M/s a Company incorporated under the laws of

and having its Registered / Head Office at

as its duly constituted lawful Attorney (hereinafter called "Attorney"

or "Authorized Representative") to exercise all or any of the powers for and on

behalf of the "Manufacturer / Bidder" in regard to Specification No.

the bids for which have been invited by

(Address "Owner") to undertake the following acts:

i. To submit proposal and participate in the aforesaid Bid Specification of the Owner on behalf of the "Manufacturer / Bidder".

ii. To negotiate with the "Owner" the terms and conditions including price for award of the contract pursuant to the aforesaid Bid and to sign the contract with the "Owner" for and on behalf of the Manufacturer / Bidder.

iii. To receive accept and execute the contract for and on behalf of the "Manufacturer / Bidder".

iv. To do any other act or submit any document related to the above.

It is expressly understood that the Power of Attorney shall remain valid, binding and irrecoverable till submission of the Contract performance guarantee in terms of the Contract. The "Manufacturer / Bidder" hereby agrees and undertakes to ratify and confirm all the whatsoever the said "Attorney" / "Authorised Representative" quotes in the Bid, negotiates and signs the contract with the "Owner" and / or purports to act on behalf of the "Manufacturer / Bidder" by virtue of this Power of Attorney and the same shall bind the "Manufacturer / Bidder" as if done by itself.

IN WITNESS WHEREOF THE "Manufacturer / Bidder" has executed these presents at

on this day of under

the Common Seal of the Manufacturer company / Bidder.

Specimen Signature of Attorney Holder

(Name & Designation)

For and on behalf of

Common Seal of the above Manufacturer/Bidder

Has been affixed thereto in the presence of :

Karnataka Power Transmission Corporation Limited

SHEET FOR TECHNOCOMMERCIAL OPENING (UN - PRICED)

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3726

Combined Package for, Work-A: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Karaya Sub station in Belthangady Taluka , Dakshina Kannada District Work-B: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Konaje Sub station in Ullala Taluka , Dakshina Kannada District Work-C: Providing additional 1X20 MVA , 110/33 kV Transformer and 33 kV bay at 110/33/11 kV Nittur Sub Station in Udupi Taluka & District Work-D: Creation of 33 kV Reference by providing 2X20 MVA , 110/33 kV Power Transformer along with 33 kV Terminal Bays at 110 kV Karkala Sub Station in Karakala Taluka , Udupi District Work E- Replacement of 2X10 MVA, 110/11 kV Power Transformers by 2X20 MVA 110/11 kV Power Transformer along with providing additional 11 kV Switchgear and replacement of indoor type old, retrofitted 11 kV switchgear by new 11 kV MCVCB outdoor Switchgear at 110 kV Halady Sub Station in Kundapura Taluka, Udupi District Work F- Balance portion of works pertaining to work of construction of 1 No of 110 KV Terminal Bay for the 110 kV Karaya Line at the existing 110/33/11 KV Sub Station at Puttur in Puttur Taluka, Dakishna Kannada District. on Partial Turnkey Basis, including Supply of all Materials/Equipments(Excluding supply of 11kV Switchgear) and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning

Bidders Name and Address

To, The Chief General Manager(Tech), Corporate Office, KPTCL, Indhana Bhavan, BANGALORE - 560009

We Declare that the ratings and performance figures of the equipment furnished by us under the Turnkey Package are Guaranteed. We further declare that in the event of any deficiencies in meeting the guarantees in repect of the characteristics as established after conducting the performance test, you may at your discretion, reject the equipment, in which case we shall replace the same with equipment as per specification and meeting the guarantee, free of charge and within a resonable time, to be mutually agreed.

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE -22 - Check List

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3726

Combined Package for, Work-A: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Karaya Sub station in Belthangady Taluka , Dakshina Kannada District Work-B: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Konaje Sub station in Ullala Taluka , Dakshina Kannada District Work-C: Providing additional 1X20 MVA , 110/33 kV Transformer and 33 kV bay at 110/33/11 kV Nittur Sub Station in Udupi Taluka & District Work-D: Creation of 33 kV Reference by providing 2X20 MVA , 110/33 kV Power Transformer along with 33 kV Terminal Bays at 110 kV Karkala Sub Station in Karakala Taluka , Udupi District Work E- Replacement of 2X10 MVA, 110/11 kV Power Transformers by 2X20 MVA 110/11 kV Power Transformer along with providing additional 11 kV Switchgear and replacement of indoor type old, retrofitted 11 kV switchgear by new 11 kV MCVCB outdoor Switchgear at 110 kV Halady Sub Station in Kundapura Taluka, Udupi District Work F- Balance portion of works pertaining to work of construction of 1 No of 110 KV Terminal Bay for the 110 kV Karaya Line at the existing 110/33/11 KV Sub Station at Puttur in Puttur Taluka, Dakishna Kannada District. on Partial Turnkey Basis, including Supply of all Materials/Equipments(Excluding supply of 11kV Switchgear) and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning

BIDDERS NAME AND ADDRESS To,

The Chief General Manager(Tech), Corporate Office, KPTCL, Indhana Bhavan, BANGALORE - 560009

CHECK LIST FOR SUBMISSION OF SCHEDULES

REFERENCE OF FORM & SCHEDULE DETAILS OF FORM & SCHEDULE WHETHER INCLUDED IN TECHNO-COMMERCIAL SHEETS (ELECTRONIC) YES/NO WHETHER INCLUDED IN Item-WisePercentage Wise Bid Financial Offer (ELECTRONIC) YES/NO WHETHER INCLUDED IN COMMERCIAL

PROPOSAL BID PROPOSAL

Schedule - 1 PRICE COMPONENTS

Schedule 2 (1 of 2 & 2 of 2) Summary of Price Components

Schedule 2A Schedule of Discounts

Schedule 2B Statement of Commercial Terms & Conditions

Schedule 3A & 3B Price break up for supply & erection

Schedule 3C Price break up for civil works

Schedule 4 Price break up for mandatory spares and maintenance & Testing Equipments.

Schedule 5 Commercial deviations

Schedule 6 Technical deviations

Schedule 7 List of special Tools & Tackles

Schedule 8 Additional information.

Schedule 9 Qualification Information [Technical & Financial]

Schedule 10 Details of Tools and plants and man power deployment

Schedule 11 A & 11B Schedule for activities & Commissioning.

Schedule 12 Type Test Charges

Schedule 13 List of optional spares and cost.

Schedule 14 Guaranteed loss of transformer.

Schedule 15 List of vendors.

Schedule 16 Annexure 'A' No deviation certificate

Schedule 17a & b Proforma for Bid guarantee

Schedule 18 Proforma for letter of undertaking

Schedule 19 Consortium Agreement

Schedule 20a & 20b Power of attorney for Individual Bidder / Lead Partner of Consortium and Consortium Member

Schedule 21 Guaranteed Declaration

Schedule 22 Check List

DRS 1-27 Relevant Technical details for Materials / Equipments

To be Uploaded Contract Quality Assurance Programme

To be Uploaded Type Test Certificates

To be Uploaded & furnished Bid Security/EMD

To be Uploaded Written Power of Attorney

To be Uploaded Letter of Undertaking

To be Uploaded No Deviation Certificate

To be Uploaded Any Other (Please Specify)

To be Uploaded Any Other (Please Specify)

To be Uploaded Any Other (Please Specify)

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3726

Combined Package for, Work-A: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Karaya Sub station in Belthangady Taluka , Dakshina Kannada District Work-B: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Konaje Sub station in Ullala Taluka , Dakshina Kannada District Work-C: Providing additional 1X20 MVA , 110/33 kV Transformer and 33 kV bay at 110/33/11 kV Nittur Sub Station in Udupi Taluka & District Work-D: Creation of 33 kV Reference by providing 2X20 MVA , 110/33 kV Power Transformer along with 33 kV Terminal Bays at 110 kV Karkala Sub Station in Karakala Taluka , Udupi District Work E- Replacement of 2X10 MVA, 110/11 kV Power Transformers by 2X20 MVA 110/11 kV Power Transformer along with providing additional 11 kV Switchgear and replacement of indoor type old, retrofitted 11 kV switchgear by new 11 kV MCVCB outdoor Switchgear at 110 kV Halady Sub Station in Kundapura Taluka, Udupi District Work F- Balance portion of works pertaining to work of construction of 1 No of 110 KV Terminal Bay for the 110 kV Karaya Line at the existing 110/33/11 KV Sub Station at Puttur in Puttur Taluka, Dakishna Kannada District. on Partial Turnkey Basis, including Supply of all Materials/Equipments(Excluding supply of 11kV Switchgear) and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning

A1 : GUARANTEED TECHNICAL PARTICULARS FOR POWER TRANSFORMERS

(Bidder should indicate the guaranteed technical data of all equipments/materials for each type of rating separately)

Class of Power Transformer 20MVA, 110/33-11kV Power Transformer

1 Name of the Manufacturer and country of origin

2 Reference standard

3 Service [Indoor/outdoor]

4 Continuous rating under service conditions specified in IS-2026 Part-I, 2011 Clause No.1.1 : HV

a. 1. With ONAN cooling - MVA

2. With ONAF cooling - MVA

b. Rated no load voltage

6 a. Rated Frequency : (Hz)

b. Number of phases

7 Current at rated voltage and on principal tap-Amp :HV

8 Maximum hot spot temperature rise calculated by formula 0C over the maximum yearly weighted average ambient temperature

9 Flux density at rated voltage and rated frequency in tesla

10 Temperature rise of top oil, oC by the thermometer (above Max. Ambient Temperature).

11 Temperature rise of winding measured by resistance (above Max. Ambient Temperature).

i. With ONAN cooling oC

ii. With ONAF cooling oC

iii. Period of operation of transformer at full load without calculated winding hot spot temperature exceeding 140oC and when

50% coolers fail

100% coolers fail [Refer Cl. No. 1.2.0.1]

12 No. of windings

13 Connections HV

14 Connection Symbol and vector group

i. Type of tap changer

ii. Tap step (percent)

iii. Total tap range (+) percent to (-) percent

iv. Tappings provided at

v. Type of regulation :

Constant flux regulation

Variable flux regulation

Combined regulation

vi)Insulation level of tap changer

16(A) Magnetization data at no load, at rated frequency

i. Current in Amps

ii. Power factor

iii. Loss in KW (core loss + dielectric loss)

iv. Max. flux density in lines/sq.cm.

a At 90% rated no load voltage

b At 100% rated no load voltage

c At 110% rated no load voltage

d At maximum rated primary voltage (i.e. 105% rated no load voltage)

16(B) i) Max. No-load loss at rated frequency at Principal Tap (KW)

ii) Max. No-Load loss at voltage corresponding to the Highest Tap (KW)

17 Max.load loss in KW at rated current and at 750C At Lowest Tap At Principal Tap At Highest Tap

a. For ONAN rating KW

b. For ONAF rating in KW

c. For OFAF rating in KW

Max. I2 R loss in KW at rated current and at 75◦C

a. For ONAN rating in KW

b. For ONAF rating in KW

c. For OFAF rating in KW

Max. Auxiliary Loss at rated Voltage & frequency

Note for Sl. No. 16 & 17: Guaranteed values of the losses shall be indicated which shall be firm & without indicating the tolerance limit

18 Impedance at rated current and frequency at 75oC winding temperature on rated MVA base. HV to LV

i. At normal tap in %

ii. At max. voltage tap in %

iii. At min. voltage tap in %

19 Reactance at rated current and frequency and normal tap on rated MVA base:

HV to LV - in %

20 Zero sequence impedance at reference temperature of 75oC at principal tap ………in %

21 Resistance at 75 oC

HV winding in Ohms in %

LV winding in Ohms in %

22 Efficiency at 75oC winding temperature as derived from guaranteed. loss figures At Unity p.f At 0.8 p.f

a. At 125% full load

b. At 100% full load

c. At 75% full load

d. At 50% full load

23 a. Maximum efficiency ………in %

b. Load at which maximum efficiency occurs (% of full load)

24 Regulation at full load and at 75oC

a. At unity p.f. in %

b. At 0.8 p.f. (lag) in %

25 a. Short time thermal rating of LV winding in KA & duration in seconds.

b. Short time thermal rating of HV winding in KA & duration in seconds.

26 Permissible overloading - HV

27 Test voltages HV LV

i. Lighting impulse withstand kV (peak)

ii. Power frequency voltage withstand kV (ms)

iii. Switching impulse withstand kV (peak)

28 Partial discharge level at 1.5Um / √3 kVrms (pC)

29 RIV at 1.1 times minimum phase to ground voltage

31 Noise level when energized at normal voltage and normal frequency at no load (db)

32 External short circuit withstand capacity (MVA) & duration (seconds)

33 Over flux withstand capability of the transformer :

34 Insulating and cooling medium

35 Approximate weights

a. Core with clamping (Kg)

b. Winding with insulation (Kg)

c. Core & Winding (Kg)

d. Tank & Fittings with accessories (Kg)

e. Oil required for first filling (Kg)

f. Untanking weight (Kg)

g. Total weight with oil weight & fitting (Kg)

h. Weight of total insulation (Kg)

36 Required quantity of oil in litres

37 Terminal arrangement

ADDITIONAL TECHNICAL PARTICULARS:

1 Details of Core (along with Tolerance if any):

a. Type of core configuration

b. Type of core joints

c. Flux density at 90% of rated voltage and frequency at Principal Tap Tesla :

d. Flux density at 110% of rated voltage and frequency at Principal Tap Tesla :

e. (i) Material of core lamination

(ii) Thickness of core lamination (mm)

f. Approximate core weight (please indicate core weight only)

g. Type of Joints used between core limb and yoke

2 Details of Windings:

a. Conductor area in sq.cm and current density in Amps/Sq.cm (at rated current). Current density A/sq. cm Conductor area sq.cm

b. Material of winding conductor

c. Approximate weight of winding (along with tolerance if any)in kgs

d. Type of windings

e. Winding insulation Type and class Graded or ungraded

f. i. Insulating material used for :

1. Regulating winding

3. HV TAP WINDING

ii. Between HV and TAP WDG and LV as applicable

iii. Between core & LV side.

iv. For core bolts, washers and end plates

v. Regulating winding & earth.

g. i. Type of axial coil support

ii. Type of Radial coil support :

h. Core bolt insulation voltage

i. Details of special arrangement provided to improve surge voltage distribution in the windings

j. Approximate weight of winding (Kgs) (Tolerance if any on the above)

k. Minimum clearance (mm) In oil In Air

Between Phases Phase to ground Between Phases Phase to ground

3 Details of Tank :

a. Material for Transformer Tank

b. Type of the tank

c. Minimum thickness of sheet

ii. Bottom (mm)

iii. Cover (mm)

iv. Cooling tubes/Radiators (mm)

d. Vacuum recommended for hot oil circulation (torr)

e. Vacuum to be maintained during oil filling in transformer tank (torr)

f. Vacuum to which the tank can be subjected without distortion (torr)

Transverse Axis Longitudinal Axis

g. No. & size of bi-directional wheels provided.

h. (i) Track gauge required for the wheels-longitudinal axis & transverse axis

(ii) Size of rail recommended for the track

4 Details of painting at works and site

5 (a) Minimum clear height for lifting tank cover and for lifting core & windings from tank (mm) (untanking height).

(b) Minimum clear height for lifting (mm)

II. Bushings - HV

6 Shipping details :

i. Parts detached for transport

ii. Weight of heaviest package in Kgs

iii. Weight of other heavy packages in Kgs

iv. Dimensions of largest package

a. Length in mm

b. Breadth in mm

c. Height in mm

v. Dimensions of other heavy packages:

a. Length in mm

b. Breadth in mm

c. Height in mm

vi. Transformer will be transported with oil / gas

7 Details of Bushings HV LV

b. Rated voltage class - KV

c. Rated current - Amps

d. One minute dry withstand power frequency voltage - kV (ms)

e. One minute wet withstand power frequency voltage - kV (ms)

f. (i) 1.2 / 50 micro sec. Lighting impulse withstand voltage - kV (Peak)

(ii) Switching surge withstand test voltage kV (peak)

g. (a) Creepage Distance in air

(b) Creepage Distance (protected)

h. Quantity of oil in bushing and specification of oil used (Kgs)

i. Whether test tap is provided

j. Weight of assembled bushing

k. Phase to earth clearance in air of live parts at the top of bushing.

l. Minimum clearance (mm) In Air

Between phases Phase to ground

m. Partial discharge level

8 Cooling system

a. Grade of oil

b. Total weight of oil in radiator in Kgs/litres

c. Total weight of radiator without oil in Kgs.

d. Total radiating surface in square meters

e. Method of drying out transformer at site

f. Type and make of material used for the radiators with size.

g. Type of radiator

h. Total number of Radiators/Banks for transformer and over all dimensions (LxBxH)

i. Rating of Transformer with one radiator bank out of service.

j. Total weight of radiators in Kgs

k. Type of mounting

l. Vacuum withstand capability

9 Cooling equipment Fan Motor Pump Motor

a. Make and Type (Details)

b. Number of connected units (nos.)

c. Number of standby units (nos.)

d. Rated Power (KW)

e. BHP of driven equipment

f. Capacity (cu m/min) or (Litres/Minute)

g. Rated voltage (Volts)

h. Locked rotor current (Amps)

i. Temperature range for which control is adjustable

j. Efficiency of motor at full load (percent)

k. Temp. rise of motor at full load (oC)

l. Whether the fan and/or pumps suitable for continuous operation at 85% of their rated voltage

m. Estimated time constant in hours for

i. Natural cooling

ii. Forced air cooling

10 On Load Tap Changing gear (should be SCADA Compatible)

c. Power flow (uni-directional or bi-directional or restricted bi-directional)

d. Rated voltage to Earth kV

e. Rated maximum current Amps

f. Step voltage V.

g. Number of steps

h. Control : Manual / Auto / Local/Remote/Independent / Parallel.

i. Auxiliary supply details

j. Voltage control (whether automatic or manual)

k. Line drop compensation Provided / Not provided.

l. Protective devices

m. Time for complete tap change (one step) sec.

n. Divertor selector switch Transient time - Cycles.

o. Value of maximum short circuit current Amps.

p. Maximum impulse withstand test voltage with 1.2/50 micro seconds full wave between switch assembly and earth (kV peak)

q. Maximum power frequency test voltage between switch assembly and earth - kV rms.

r. Maximum impulse withstand test voltage with 1.2/50 micro seconds across the tapping range (kV peak).

s. Approximate over all dimensions of Tap changer mm

t. Approximate over all weight Kgs.

u. Approximate over all quantity of oil-ltrs/Kgs.

v. Particulars of the OLTC control panel for installation in the control room.

w. OLTC Routine test shall be conducted on each Transformers.

i) Mechanical Endurance Test (Min. 1000 operations)

ii) Sequence Test

iii) Pressure Test

iv) Vacuum (Helium) Test

v) Auxiliary Circuit Insulation test

x. OLTC Drive Mechanism Box: Make & Type

11 Over all dimensions of transformer including cooling gear, tap changing gear etc.

d. Reference drawing No.

12 Whether oil temperature indicator provided (Yes/No).

13 (a) Type of oil level indicator

(b) whether supervisory alarm contact for low oil level provided (Yes/No)

14 Type and size of Gas operated relay and whether supervisory alarm and trip contacts provided and their size and Nos.

15 Temperature indicators Oil Temp. indicator Winding temp. indicator

a. Make and Type

b. Permissible setting ranges for alarm & trip.

c. No. of contact

d. Current rating of each contact

e. Whether remote indicator provided, if, so, whether equipment required at purchaser's control room is included.

f. Size and No.

16 Ratio and Type of CT used for winding temperature

17 Type and size of Thermostat used

For Tr. Tank OLTC

18 No. of Breathers provided (No.)

19 Type of dehydrating agent used for breathers

20 a. Capacity of conservator vessel litres

b. Volume between the highest and lowest visible oil level (litres)

21 Valve sizes and number required/ fitted

i. Drain valves - mm - No.

ii. Filter valves - mm - No.

iii. Sampling valves - mm - No.

22 a. Type and make of pressure relief device

b. No. of each type of devices per transformer unit (Nos.)

c. Minimum pressure at which the device operates (Kpa)

23 Lifting jacks

a. Governing standard

b. No. of jacks in one set

d. Capacity (tonnes)

g.Height in closed position (mm)

h.Mean diameter of thread (mm)

24 Characteristics of Insulating oil to be used

Viscosity at 40 ºC in mm²/s

Viscosity at -30 ºC in mm²/s

Pour point in ºC

Water content in mg/kg

Breakdown voltage in kV

Density at 20 ºC in g/ml

Particle content

2 – Refining/stability

Acidity in mg KOH/g

Interfacial tension in mN/m

Total sulphur content

Corrosive sulphur

Potentially corrosive sulphur

Inhibitors of IEC 60666 in %

Metal passivator additives of IEC 60666 in mg/kg

Other additives

2- Furfural and related compounds content in mg/kg

3 - Performance

Oxidation stability for uninhibited oil – 164 hrs

Total acidity in mg KOH/g

Gassing tendency

4 – Health, safety and environment (HSE)

Flash point in ºC

PCA content in %

PCB content in mg/kg

5 – N-dm Analysis

6. Details of oil preserving equipment offered.

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3726

Combined Package for, Work-A: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Karaya Sub station in Belthangady Taluka , Dakshina Kannada District Work-B: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Konaje Sub station in Ullala Taluka , Dakshina Kannada District Work-C: Providing additional 1X20 MVA , 110/33 kV Transformer and 33 kV bay at 110/33/11 kV Nittur Sub Station in Udupi Taluka & District Work-D: Creation of 33 kV Reference by providing 2X20 MVA , 110/33 kV Power Transformer along with 33 kV Terminal Bays at 110 kV Karkala Sub Station in Karakala Taluka , Udupi District Work E- Replacement of 2X10 MVA, 110/11 kV Power Transformers by 2X20 MVA 110/11 kV Power Transformer along with providing additional 11 kV Switchgear and replacement of indoor type old, retrofitted 11 kV switchgear by new 11 kV MCVCB outdoor Switchgear at 110 kV Halady Sub Station in Kundapura Taluka, Udupi District Work F- Balance portion of works pertaining to work of construction of 1 No of 110 KV Terminal Bay for the 110 kV Karaya Line at the existing 110/33/11 KV Sub Station at Puttur in Puttur Taluka, Dakishna Kannada District. on Partial Turnkey Basis, including Supply of all Materials/Equipments(Excluding supply of 11kV Switchgear) and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning

GUARANTEEED TECHNICAL PARTICULARS FOR LATTICE TYPE MOUNTING STRUCTURES

(Bidder should indicate the guaranteed technical data of all equipments / materials for each type of rating separately)

Mounting Structures

1 Standars adopted

i. Properties of section

ii. Bolts & Nuts

iii. Galvanising

2 Minimum Sheared edge distance (mm)

3 Minimum Rolled edge distance (mm)

4 Quality of Zinc used for galvanising

5 Maximum percentage increase in structure weight due for galvanisation

6 Quantity of Zinc required for galvanisation per MT of structurals

7 Size of bolts and nuts (including foundation bolts & nuts for support structure)

iii. Foundation Bolts

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3726

Combined Package for, Work-A: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Karaya Sub station in Belthangady Taluka , Dakshina Kannada District Work-B: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Konaje Sub station in Ullala Taluka , Dakshina Kannada District Work-C: Providing additional 1X20 MVA , 110/33 kV Transformer and 33 kV bay at 110/33/11 kV Nittur Sub Station in Udupi Taluka & District Work-D: Creation of 33 kV Reference by providing 2X20 MVA , 110/33 kV Power Transformer along with 33 kV Terminal Bays at 110 kV Karkala Sub Station in Karakala Taluka , Udupi District Work E- Replacement of 2X10 MVA, 110/11 kV Power Transformers by 2X20 MVA 110/11 kV Power Transformer along with providing additional 11 kV Switchgear and replacement of indoor type old, retrofitted 11 kV switchgear by new 11 kV MCVCB outdoor Switchgear at 110 kV Halady Sub Station in Kundapura Taluka, Udupi District Work F- Balance portion of works pertaining to work of construction of 1 No of 110 KV Terminal Bay for the 110 kV Karaya Line at the existing 110/33/11 KV Sub Station at Puttur in Puttur Taluka, Dakishna Kannada District. on Partial Turnkey Basis, including Supply of all Materials/Equipments(Excluding supply of 11kV Switchgear) and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning

ISOLATORS AND TERMINAL CONNECTORS

(Bidder to indicate technical data for each type of rating separately)

Isolators and Terminal connectors ratings

a. Name of the Manufacturer

b. Country of Manufacture

c. Manufacturer's type designation

d. Standard applicable for isolators and earthing switches

e. Rated Voltage Ur (kV)

f. Rated Current Under site conditions (A) at 50oC ambient

g. Rated frequency (Hz) cgmt

h. Number of poles

i. Whether all 3 poles are ganged mechanically

j. Pole to pole spacing

k. Type of installation

2 Guaranteed Ratings

a. Rated short time current of isolator for Is (kA) and dynamic current (kAp)

b. Opening time of isolator and earth switch (s)

c. Closing time of isolator and earth switch (s)

d. Temperature rise over 50oC ambient temperature corresponding to maximum continuous current (oC)

3 Dielectric withstand capacity of completely assembled isolator/isolator and earth switch

a. One minute dry power freq. Withstand test voltage (kV ms)

i. Against ground (kV rms)

ii. Across isolating distance (kV rms)

b. 1.2/50 micros a impulse withstand test voltage

i. Against ground (kVp)

ii. Across isolating distance (k Vp)

c. 250/2500 micros switching surge withstand test voltage (dry & wet)

i. Against ground (kVp)

ii. Across isolating distance (kVp)

d. Corona extinction voltage (k V rms)

e. Radio interference level at 1.1 Ur/ /3 (in micro volts) at 1.0 MHz

f. Total creepage distance to ground (mm)

4 Operating Mechanism

A. For Main Blades

a. Type of motor operating / manually driven mechanism

b. Manufacturer's Type / designation

c. Rated torque of the mechanism

d. Type and rating of motor

B. For Earth Switches

a. Type of motor operating / manually driven mechanism

b. Manufacturer's type designation

c. Rate troque of the mechanism

d. Type and rating of motor

4.1 Interlocks:

a. Whether mechanical/constructional interlock between isolator and earth switch provided.

b. Details of electrical interlock enclosed for

ii. Earth Switch

c. Arrangement provided to prevent electrical or manual operation unless interlock conditions are satisfied whether interlock coil is continuously rated

d. Rated DC control voltage and variation allowed

e. Power consumption (W)

a. Rated DC control voltage (V)

b. Limits of voltage

c. Power consumption of control coils (W)

5 Constructional Features

a. Minimum clearance in air

i. Between phases (mm)

ii. Between live parts to earth (mm)

iii. Distance between terminals of same phase (mm)

b. Whether position of earth switch can be interchanged at site to either side of pole

c. Minimum clearance between live part and earth switch blade throughout the entire operational are of earth switch (mm)

d. Terminal pad details

i. Diameter & length

ii. Material of pad

e. Insulator data

iii. No. of insulator stacks / phase

iv. No. of insulators/stack

f. Main Contracts

i. Type of contacts

ii. Contract area (cm2)

iii. Material of contacts

iv. Contact pressure (kg / cm2)

v. Maximum current density under normal current carrying capacity (A/cm2)

vi. Thickness of silver plating

g. Number of auxiliary contacts on isolator/pole for owner's use

h. Number of auxiliary contacts on earth switch pole for Owner's use

i. Auxiliary contacts

i. Rated voltage (V)

ii. Rated Continuous current (A)

iii. Rated Dc breaking current with 20 ms time constant (A)

j. Mounting dimenstions of isolators

i. Distance between supports

ii. Top dimensions of support

k. Height from mounting plane to top of terminal stud

l. Whether cable glands required included in the scope for inter pole cabling to be done by the Owner.

Whether the following are enclosed :

a. Type test reports as per IEC 129

b. OGA drawings for isolator with & without earth switches

c. Operation manual for isolators

d. Details of motor operating / manually driven mechanism

e. Recommended drawing for mounting details for isolator and drives.

f. Leaflets & literature bringing out salient features of equipment offered.

g. Details of constructional interlock

CONTROL CABINETS

1 Manufacturer's Name

2 Indoor / Outdoor application

3 Design ambient air temperature (oC)

4 Standards applicable

5 Thickness of sheet steel (mm) and whether cold rolled or hot rolled

6 Degree of protection provided

7 Bill of material for all the equipment mounted on control cabinet giving the following details :

a. Make and Type

b. Applicable Standard

c. Voltage rating

d. Current rating

e. Duty class, if applicable

f. Manufacturer's catalogue No.

g. Total heat load of cabinet (for purpose of ventilation requirement)

8 Colour of finish paint IS : 5

9 Control Wiring

a. Size of conductor

i. For CT circuits

ii. For other circuits

b. Conductor Solid / Stranded

c. Number of Stranded/conductor

10 Terminal Blocks

b. Current rating

i. Power terminals (A)

ii. Other terminals (A)

11 Space Heater Rating at 240 V DC

12 Control cabinet drawing showing the following

a. Outline dimensions, floor opening, floor/wall/pedestal fixing arrangements weights etc.,

c. Front view, inside view showing the mounting arrangement of various equipment

13 Schematic / wiring diagram of control cabinet enclosed

14 Interconnection drawing showing Owner's external cable, connections to the control cabinet enclosed Isolators & Terminal Connectors

15 Type test report to verify degree of protection enclosed.

16 Details of terminal rows

i. Whether arranged vertical or horizontal

ii. Clearance from adjacent components

iii. Distance between rows

iv. Whether transparent protection cover provided.

16 TERMINAL CLAMPS AND CONNECTORS

1. Manufacturer's Name

2. Applicable Standards

4. Material of connector

b. Bolts & Nuts

c. Spring washers

5. Rated Current

6. a. Rated terminal load (kg)

b. Factor of safety

7. Minimum thickness of any part (mm)

8. Weight of clamp complete with hardware (kg)

9. Type test reports as per IS enclosed.

10. OGA drawing enclosed

BUSHING / SUPPORT INSULATOR

1 Manufacturer's Name

2 Type test report to verify degree of protection enclosed.

3 Applicable Standards

i. Diameter (Top)

ii. Diameter (Bottom)

5 Total Creepage distance (mm)

6 Rated voltage (kV)

7 Power frequency withstand voltage for 1 min. (k V rms) dry and wet

8 1.2/50 micro sec. Impulse withstand voltage (kVp)

9 250/2500 micro sec. Switching impulse withstand voltage (kVp) dry and wet

10 Corona Extinction voltage (k V)

12 Max. allowable span (mm)

13 Cantilever Strengthh (kg)

14 OGA drawing enclosed

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3726

Combined Package for, Work-A: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Karaya Sub station in Belthangady Taluka , Dakshina Kannada District Work-B: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Konaje Sub station in Ullala Taluka , Dakshina Kannada District Work-C: Providing additional 1X20 MVA , 110/33 kV Transformer and 33 kV bay at 110/33/11 kV Nittur Sub Station in Udupi Taluka & District Work-D: Creation of 33 kV Reference by providing 2X20 MVA , 110/33 kV Power Transformer along with 33 kV Terminal Bays at 110 kV Karkala Sub Station in Karakala Taluka , Udupi District Work E- Replacement of 2X10 MVA, 110/11 kV Power Transformers by 2X20 MVA 110/11 kV Power Transformer along with providing additional 11 kV Switchgear and replacement of indoor type old, retrofitted 11 kV switchgear by new 11 kV MCVCB outdoor Switchgear at 110 kV Halady Sub Station in Kundapura Taluka, Udupi District Work F- Balance portion of works pertaining to work of construction of 1 No of 110 KV Terminal Bay for the 110 kV Karaya Line at the existing 110/33/11 KV Sub Station at Puttur in Puttur Taluka, Dakishna Kannada District. on Partial Turnkey Basis, including Supply of all Materials/Equipments(Excluding supply of 11kV Switchgear) and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning

GUARANTEED TECHNICAL PARTICULARS FOR CURRENT TRANSFORMERS

(Bidder should indicate the guaranteed technical data of all equipments/materials for each type of rating separately)

Voltage Class and ratio of CT

Sl.No. PARTICULARS

1 Name of the manufacturer

2 Country of origin

3 Standard Governing specification

5 Manufacturer's type designation

6 a. Nominal system voltage KV

b. Highest system voltage KV

7 a, Rated primary current

b. Rated secondary current Amp

c. Rated transformation ratio Amp

8 Rated Secondary terminal Voltage at

i. Rated Current

ii. 10 Times the rated current

iii. 20 Times the rated current

9 Ratio of current Transformer

10 Number of Cores

11 Details of Core

i. Rated Burden

ii. Accuracy Class

iii. Accuracy limit factor

iv. Instrument Security factor

v. Knee point voltage at

vi. Secondary winding

resistance (Ret. In Ohms)

vii. Magnetising current at Vk/4

i. Rated Burden

ii. Accuracy Class

iii. Accuracy limit factor

iv. Instrument Security factor

v. Knee point voltage at

vi. Secondary winding

resistance (Ret. In Ohms)

vii. Magnetising current at Vk/4

i. Rated Burden

ii. Accuracy Class

iii. Accuracy limit factor

iv. Instrument Security factor

v. Knee point voltage at

vi. Secondary winding

resistance (Ret. In Ohms)

vii. Magnetising current at Vk/4

i. Rated Burden

ii. Accuracy Class

iii. Accuracy limit factor

iv. Instrument Security factor

v. Knee point voltage at

vi. Secondary winding

resistance (Ret. In Ohms)

vii. Magnetising current at Vk/4

i. Rated Burden

ii. Accuracy Class

iii. Accuracy limit factor

iv. Instrument Security factor

v. Knee point voltage at

vi. Secondary winding

resistance (Ret. In Ohms)

vii. Magnetising current at Vk/4

12 Current error at rated primary current

13 Phase displacement at rated primary current

14 Composite error at rated accuracy limit primary current in %

15 Rated short time current and duration

a. Thermal ( I th) KA (rms) for 1 sec KA

b. Dynamic (I dyn) (peak)

16 Temperature rise of the windings (by resistance method) over an ambient temperature of 45oC

a)At rated current Deg C

b)At 100% overload for 5 minutes Deg C

17 Partial discharge level

18 Particulars of windings

a. Primary winding :

ii. No.of turns

iii.Current density at rated current Amp / Sq.mm

iv. Size of conductor

v. class of insulation

b. Secondary winding

ii. No. of turns

iii.Current density at rated current Amp / Sq.mm

iv. Size of conductor

v. Class of insulation

vi. Resistance computed to 75 deg C Ohm

vii. Insulating material used

c. Rated insulation levels :

i. One minute power withstand voltage KV (rms)

ii. Intersection withstand voltage of primary windings KV (rms)

iii. Impulse withstand voltage KV (rms)

19 Particulars of core :

ii. Flux density :

a. At rated primary current Tesla

b. At 15 times rated primary current Tesla

iii. Thickness of steel lamination mm

iv. Whether CRGO steel stampings are used?

v. Watt loss/Kg. of steel

vi. Knee point e.m.f

20 Particulars of porcelain housing / bushing

i. Specification to which it confirms

ii. Name of manufacturer

iii. Power frequency withstand voltage for one minute

a. Dry KV (rms)

b. Wet KV (rms)

iv. Dry lightning impulse withstand voltage 1.2/50 micro sec. Wave shape KV (rms)

v. Visible power frequency discharge voltage KV (rms)

vi. Creepage distance in air

a. Protected mm

vii. Weight of porcelain housing / bushing kgs

21 Overall dimensions :

i. Total weight of copper used

a. Primary winding kg

b. Secondary winding kg

ii. Weight of core kg

iii. a. Quantity of insulating oil liters

b. Weight of insulating oil kgs

iv. Total weight kgs

23 Particulars of terminal connector

i. Name of the manufacturer

ii. Rated current Amps

iii. Temperature rise above an ambient of 45 deg.c

a. At rated current Deg C

b. At 150% of rated current for 15 min Deg C

CONTROL CABINET :

1 Manufacturer's Name

3 Design ambient air temperature (oC)

4 Standards applicable

5 Thickness of sheet steel (mm) and whether cold rolled or hot rolled

6 Degree of protection provided

7 Bill of material for all the equipment mounted on control cabinet giving the following details

b. Applicable Standard

c. Voltage rating

d. Current rating

e. Duty class, if catalogue No.

f. Manufacturer's catalogue No.

g. Total heat load of cabinet (For purpose of ventilation requirement)

8 Colour of finish paint IS : 5

9 Control Wiring

a. Size Conductor

i. For CT circuits

ii. For other circuits

b. Conductor Solid Stranded

c. Number of Strands / conductor

10 Terminal Blocks

b. Current terminals (A)

i. Power terminals (A)

ii. Other terminals (A)

11 Space Heater Rating at 240 VAC

12 Control cabinet drawing showing the following

a. Outline dimensions, floor openings, Floor/wall/pedestal fixing arrangements, Weights etc.

b. Front view, inside view showing the Mounting arrangement of various Equipment.

13 Schematic / wring diagram of control Cabinet enclosed

14 Interconnection drawing showing cable, Connections to the control cabinet enclosed.

15 Type test report to verify degree of Protection enclosed

16 Details of terminal rows

i. Whether arranged vertical or horizontal

ii. Clearance from adjacent components

iii. Distance between rows

iv. Whether transparent protection cover provided

SUPPORT INSULATOR

1 Manufacturer's Name

3 Applicable Standards

ii. Diameter (Top)

iii. Diameter (Bottom)

5 Total creepage distance (mm)

6 Rated voltage (KV)

7 Power frequency withstand voltage for 1 min (KV rms) dry and wet

8 1.2/50 micro sec. Impulse withstand voltage (KVP)

9 250/2500 micro sec. Switching impulse

10 Corona Extinction voltage (KV)

12 Max. allowable span (mm)

13 Cantilever Strength (Kg)

14 OGA drawing enclosed

TERMINAL CLAMPS AND CONNECTORS

1 Manufacturer's Name

2 Applicable Standards

4 Material of connector

b. Bolts & Nuts

c. Spring washers

5 Rated Current

6 a. Rated terminal load (Kg)

b. Factor of safety

7 Minimum thickness of any part (mm)

8 Weight clamp complete with hardware (Kg)

9 Type test report as per IS enclosed

10 OGA drawing enclosed

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3726

Combined Package for, Work-A: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Karaya Sub station in Belthangady Taluka , Dakshina Kannada District Work-B: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Konaje Sub station in Ullala Taluka , Dakshina Kannada District Work-C: Providing additional 1X20 MVA , 110/33 kV Transformer and 33 kV bay at 110/33/11 kV Nittur Sub Station in Udupi Taluka & District Work-D: Creation of 33 kV Reference by providing 2X20 MVA , 110/33 kV Power Transformer along with 33 kV Terminal Bays at 110 kV Karkala Sub Station in Karakala Taluka , Udupi District Work E- Replacement of 2X10 MVA, 110/11 kV Power Transformers by 2X20 MVA 110/11 kV Power Transformer along with providing additional 11 kV Switchgear and replacement of indoor type old, retrofitted 11 kV switchgear by new 11 kV MCVCB outdoor Switchgear at 110 kV Halady Sub Station in Kundapura Taluka, Udupi District Work F- Balance portion of works pertaining to work of construction of 1 No of 110 KV Terminal Bay for the 110 kV Karaya Line at the existing 110/33/11 KV Sub Station at Puttur in Puttur Taluka, Dakishna Kannada District. on Partial Turnkey Basis, including Supply of all Materials/Equipments(Excluding supply of 11kV Switchgear) and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning

GUARANTEED TECHNICAL PARTICULARS FOR ACSR CONDUCTOR

(Bidder should indicate the guaranteed technical data of all equipments/materials for each type of rating separately)

Sl. No. Bidders Name

ASCR Conductor ASCR Conductor ASCR Conductor ASCR Conductor

Description Unit

1 Name & Address of manufacturer

2 PARTICULARS OF RAW MATERIALS

a Minimum Purity of aluminium %

b Maximum Copper content %

2.2 Steel Wires/Rods

c Phosphorous %

a Minimum Purity of zinc %

3 STEEL STRANDS

b Maximum Copper content mm

3.2 Minimum Braking load of strand KN

3.3 Maximum Resistance of 1m length of strand at 20 deg C Ohm

4 STEEL STRANDS AFTER STRADING

4.2 Minimum Braking load of strand KN

4.3 Galvanising

a Minimum weight of zinc coaing per sqm. Of uncoated wire surface Gm

b Minimum number of one minute dips that the galvanised strand can withstand in the standard preece test Nos.

c Min.No. of twists in a guage length equal to 100 times dia of wire which the strand can withstand in the torsion test. Nos.

5 ACSR Conductor

5.1 UTS of conductor KN

5.2 Lay ratio of conductor

a Outer steel layer

b 12 wire aluminium layer

c 18 wire aluminium layer

d 24 wire aluminium layer

5.3 DC resistance of conducor at 20 deg. C Ohm/km

5.4 Minimum Corona Extincion Voltage (line to ground)

5.5 RIV at 1MHz

a a 305KV (rms) under dry conditions microvolts

5.6 Standard length of conductor in one drum M

5.7 Direction of lay for outside layer NA

5.8 Linear mass of the conductor

a Standard Kg/km

b Minimum Kg/km

c Maximum Kg/km

6 Drum is as per specificaion Yes/No

7 No. of cold pressure butt welding equipments available at works Nos.

1 Name & Address of manufacturer

2 PARTICULARS OF RAW MATERIALS

2.1 Steel Wires/Rods

c Phosphorous %

a Minimum Purity of zinc %

3 STEEL STRANDS

3.2 Minimum Braking load of strand KN

3.3 Galvanising

a Minimum weight of zinc coating per sqm. Of uncoated wire surface Gm

b Minimum number of one minute dips that the galvanised strand can withstand in the standard preece test Nos.

c Min. no. of twists in a guage length equal to 100 times dia of wire which the strand can withstand in the torsion test. Nos.

4.0 STRANDED EARTHWIRE

4.1 UTS of conductor KN

4.2 Lay length of outer seel layer

4.3 DC resistance of conducor at 20 deg. C Ohm/km

4.4 Standard length of conductor in the drum Mtrs

4.5 Direction of lay for outer layer NA

4.6 Linear mass of earth wirer

c Minimum Kg/km

5.0 Drum is as per specificaion Yes/No

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3726

Combined Package for, Work-A: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Karaya Sub station in Belthangady Taluka , Dakshina Kannada District Work-B: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Konaje Sub station in Ullala Taluka , Dakshina Kannada District Work-C: Providing additional 1X20 MVA , 110/33 kV Transformer and 33 kV bay at 110/33/11 kV Nittur Sub Station in Udupi Taluka & District Work-D: Creation of 33 kV Reference by providing 2X20 MVA , 110/33 kV Power Transformer along with 33 kV Terminal Bays at 110 kV Karkala Sub Station in Karakala Taluka , Udupi District Work E- Replacement of 2X10 MVA, 110/11 kV Power Transformers by 2X20 MVA 110/11 kV Power Transformer along with providing additional 11 kV Switchgear and replacement of indoor type old, retrofitted 11 kV switchgear by new 11 kV MCVCB outdoor Switchgear at 110 kV Halady Sub Station in Kundapura Taluka, Udupi District Work F- Balance portion of works pertaining to work of construction of 1 No of 110 KV Terminal Bay for the 110 kV Karaya Line at the existing 110/33/11 KV Sub Station at Puttur in Puttur Taluka, Dakishna Kannada District. on Partial Turnkey Basis, including Supply of all Materials/Equipments(Excluding supply of 11kV Switchgear) and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning

GUARANTEED TECHNICAL PARTICULARS FOR POST INSULATORS AND DISC INSULATORS

(Bidder should indicate the guaranteed echnical data of all equipments/mzaterials for each type of rating separately)

Post Insulators & Disc Insulators

1.00 POST INSULATORS 11kV

1.01 Manufacurer's name and Address

1.02 Type of Insulators Units

1.03 Applicable Standard

1.04 No. of Units per Sack

1.05 Whether corona ring provided or not (Yes/No)

1.06 Diameter (mm)

1.07 Bolt circle diameter (mm)

1.08 Spacing bewteen two units (mm)

1.09 Creepage Distance

b Protected (mm)

1.10 Power frequency wihstand volage of insulator

i. Dry (KV rms)

ii. Wet (KV rms)

b One complete stack

i. Dry (KV rms)

ii. Wet (KV rms)

1.11 1.2/50 micro sec.impulses withstand voltage

b Complete stack

1.12 Visual discharge volage for falling power frequency voltage for complete stack

1.13 Radio interference voltage of compete stack

i Test Voltage(KV rms)

ii Radio interference voltage (micro volt)

1.14 Weight of complete stack (Kg)

1.15 Cantilever Strength

ii Underhung (Kg)

b Complete stack

ii Underhung (Kg)

1.16 Tensile Strength (Kg)

1.17 Torsional Strength (Kg.m)

1.18 Compression Strength (Kg)

1.19 250/2500 micro second switching surge withstand voltage

i Dry (KV Peack)

ii Wet (KV Peack)

b Complete stack

i Dry (KV Peack)

ii Wet (KV Peack)

1.20 Whether shed profile of insulaor is conforming to IEC-815? (Yes/No)

1.21 Whether calculation characterising shed profile as per IEC-815 are enclosed with bid? (Yes/No)

1.22 Wheher offered BPI is alternate shed type?

1.00 INSULATOR STRINGS 66kV

1.01 Manufacturer's Name

1.02 Type of string

a Single/Double

b Suspension/Tension

1.03 Applicable standards

1.04 Type of Insulators

a Ball & socket/oher

b Whether fog type

1.05 Insulating Material

1.06 No. of unis per string

1.07 Size of each unit

a Diameter of disc (mm)

b Spacing between adjacent units (mm)

a Each disc (Kg)

b Complete String (mm)

1.09 Creepage Distance

a Each disc (mm)

b Complete String (mm)

1.10 power frequency withstand voltage of the complete string with corona control ring

1.11 Lightening impulse withstand voltage of the complete string for both positive and negative

1.12 Switching surge withstand voltage of the complete string with corona ring.

1.13 Power frequency puncture withstand voltage of each Disc (KV rms)

1.14 Electro Mechanical strength (KG) of each disc.

1.15 Minimum corona extinction voltage level of the complete string with corona ring (Dry condition)

1.16 RIV level of the complete string with corona control ring shall be below 1000 micro at 1 MHz when subjected to a test voltage indicated against clause 1.15 above. (Dry condition)

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3726

Combined Package for, Work-A: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Karaya Sub station in Belthangady Taluka , Dakshina Kannada District Work-B: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Konaje Sub station in Ullala Taluka , Dakshina Kannada District Work-C: Providing additional 1X20 MVA , 110/33 kV Transformer and 33 kV bay at 110/33/11 kV Nittur Sub Station in Udupi Taluka & District Work-D: Creation of 33 kV Reference by providing 2X20 MVA , 110/33 kV Power Transformer along with 33 kV Terminal Bays at 110 kV Karkala Sub Station in Karakala Taluka , Udupi District Work E- Replacement of 2X10 MVA, 110/11 kV Power Transformers by 2X20 MVA 110/11 kV Power Transformer along with providing additional 11 kV Switchgear and replacement of indoor type old, retrofitted 11 kV switchgear by new 11 kV MCVCB outdoor Switchgear at 110 kV Halady Sub Station in Kundapura Taluka, Udupi District Work F- Balance portion of works pertaining to work of construction of 1 No of 110 KV Terminal Bay for the 110 kV Karaya Line at the existing 110/33/11 KV Sub Station at Puttur in Puttur Taluka, Dakishna Kannada District. on Partial Turnkey Basis, including Supply of all Materials/Equipments(Excluding supply of 11kV Switchgear) and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning

GUARANTEED TECHNICAL PARTICULARS FOR INSULATOR HARDWARE AND CLAMPS

(Bidder should indicate the guaranteed technical data of all equipments/materials for each type of rating separately)

1.00 Insulator hardware

1.01 Manufacturer's Name and address

1.02 Applicable Standards

b Nuts bolts and washers

e Strain and suspension/drop clamp (kg)

1.04 Ultimate Strength

a Complete assembly (kg)

b Suspension /drop clamp (kg)

c Strain clamp (kg)

d D-shackle (kg)

e Ball eye (kg)

f Ball clevis (kg)

g Clevis eye (kg)

h Socket eye (kg)

I Socket clevis (kg)

j Yoke Plate (kg)

1.05 Magnetic power loss at

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3726

Combined Package for, Work-A: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Karaya Sub station in Belthangady Taluka , Dakshina Kannada District Work-B: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Konaje Sub station in Ullala Taluka , Dakshina Kannada District Work-C: Providing additional 1X20 MVA , 110/33 kV Transformer and 33 kV bay at 110/33/11 kV Nittur Sub Station in Udupi Taluka & District Work-D: Creation of 33 kV Reference by providing 2X20 MVA , 110/33 kV Power Transformer along with 33 kV Terminal Bays at 110 kV Karkala Sub Station in Karakala Taluka , Udupi District Work E- Replacement of 2X10 MVA, 110/11 kV Power Transformers by 2X20 MVA 110/11 kV Power Transformer along with providing additional 11 kV Switchgear and replacement of indoor type old, retrofitted 11 kV switchgear by new 11 kV MCVCB outdoor Switchgear at 110 kV Halady Sub Station in Kundapura Taluka, Udupi District Work F- Balance portion of works pertaining to work of construction of 1 No of 110 KV Terminal Bay for the 110 kV Karaya Line at the existing 110/33/11 KV Sub Station at Puttur in Puttur Taluka, Dakishna Kannada District. on Partial Turnkey Basis, including Supply of all Materials/Equipments(Excluding supply of 11kV Switchgear) and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning

GUARANTEED TECHNICAL PARTICULARS FOR SURGE ARRESTORS

(Bidder should indicate the guaranteed technical data of all equipments / materials for each type of rating separately)

Surge Arrestors

SURGE ARRESTORS

a. Manufacturer's Name

b. Manufacturer's type / designation

c. Applicable standards

ELECTRICAL CHARACTERISTICS

2 A. Arrester class and Type

b. Rated arrester voltage (kV)

c. Maximum continuous operating voltage (COV) at design ambient temeprature

d. Nominal discharge current (8/20 micro sec. Wave) (kA)

e. i. Minimum discharge capacity (kJ/kV) referred to rated voltage of minimum of discharge characteristics

ii. Line discharge class, as per IEC

f. Maximum equivalent front of waver protection level (discharge voltage with 0.5 * 1.5 micro sec, 10 kA impulse current).

g. i. Minimum switching surge residual voltage at 1 kA (kV p)

ii. Maximum switching surge residual voltage at 1 kA(kVp)

h. Maximum residual voltage for 8/20 micro sec. Current wave

i. At 50% nominal discharge current (kVp)

ii. At 100% nominal discharge current (kVp)

iii. At 200% nominal discharge current (kVp)

i. One minute power frequency (dry) withstand Voltage of arrester (k Vrms)

j. Impulse withstand test voltage of arrester housing with 1.2/50 micro sec. Wave (kVp)

k. Impulse current withstand

i. High current short duration (4/10 micro sec. Wave) kAp

ii. Low current long durationn (A peak)

l. Maximum internal ionisation at 50 Hz voltage equal to

m. Reference voltage and corresponding reference current of arrester.

n. Maximum internal leakage current at (mA).

iii. COV at 150oC

iv. Reference voltage

o. Pressure relief class

p. Are the protection levels affected by pollution of external insulation

q. Energy absorption capacity in kJ per operation of the arrester, during a switching surge discharge.

r. Maximum amount of energy that may be dispatched into the arrester during discharge into the arrester during discharge assuming that discharge takes place within 1 min period and state the switching surge current.

s. Internal pressure required to operate pressure relief device as a percentage of burst pressure of porcelain

t. Dynamic over voltage withstand kVp

ii. For 0.01 sec.

iii. For 0.1 sec.

u. Minimum prospective symmetrical fault current (kA rms)

v. Rejection rate of ZnO blocks during manufacturing and operation for the past three years (%) seperately

w. Rated voltage of ZnO disc (kV)

i. No. of ZnO discs in a unit

ii. No. of units/arrester

iii. Height / Thickness of ZnO discs 9(mm)

iv. Diameter of ZnO disc. (mm)

3 EXTERNAL INSULATION

b. Applicable standard

c. Impulse voltage withstand test voltage of housing with 1.2 / 50 micro sec wave (kVp)

d. One minute power frequency withstand voltage of arester housing dry and wet (kv rms)

e. Total creepage distance of arrester housing (mm)

f. Cantilever strength of complete arrester (kg)

4 OVERALL DIMENSIONS

A. Overall dimensions

i. Overall Height (mm)

ii. Height upto top of terminal pad from mounting plane

iii. Material of terminal pad

iv. Size of terminal pad

v. Mounting dimensions and diameter of mounting holes

vi. Diameter of insulator

b. Total weight of complete arrester (kg)

TERMINAL CLAMPS AND CONNECTIONS

1 Manufacturer's Name

2 Applicable Standards

4 Material of connector

b. Bolts & Nuts

c. Spring washers

5 Rated Current

6 a. Rated terminal load (kg)

b. Factor of safety

7 Minimum thickness of any part (mm)

8 Weight of clamp complete with hardware (kg)

9 Type test reports as per IS enclosed

10 OGA drawing enclosed.

BUSHING / SUPPORT INSULATOR

1 Manufacturer's Name

3 Applicable Standards

ii. Diameter (Top)

iii. Diameter (Bottom)

5 Total Creepage distance (mm)

6 Rated voltage (kV)

7 Power frequency withstand voltage for 1 min. (k Vrms) dry and wet

8 1.2/50 micro sec. Impulse withstand voltage (kVp) dry and wet

9 250/2500 micro sec. switching impulse withstand voltage (kVp) dry and wet

10 Corona Extinction voltage (kV)

12 Max. allowable span (mm)

13 Cantilever Strength (kg)

14 OGA drawing enclosed.

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3726

Combined Package for, Work-A: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Karaya Sub station in Belthangady Taluka , Dakshina Kannada District Work-B: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Konaje Sub station in Ullala Taluka , Dakshina Kannada District Work-C: Providing additional 1X20 MVA , 110/33 kV Transformer and 33 kV bay at 110/33/11 kV Nittur Sub Station in Udupi Taluka & District Work-D: Creation of 33 kV Reference by providing 2X20 MVA , 110/33 kV Power Transformer along with 33 kV Terminal Bays at 110 kV Karkala Sub Station in Karakala Taluka , Udupi District Work E- Replacement of 2X10 MVA, 110/11 kV Power Transformers by 2X20 MVA 110/11 kV Power Transformer along with providing additional 11 kV Switchgear and replacement of indoor type old, retrofitted 11 kV switchgear by new 11 kV MCVCB outdoor Switchgear at 110 kV Halady Sub Station in Kundapura Taluka, Udupi District Work F- Balance portion of works pertaining to work of construction of 1 No of 110 KV Terminal Bay for the 110 kV Karaya Line at the existing 110/33/11 KV Sub Station at Puttur in Puttur Taluka, Dakishna Kannada District. on Partial Turnkey Basis, including Supply of all Materials/Equipments(Excluding supply of 11kV Switchgear) and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning

GUARANTEED TECHNICAL PARTICULARS FOR POWER CABLES (LV CABLES)

SL. No PARTICULARS

1.1kV Grade PVC Power Cables

3 Manufacturer’s type designation

4 Applicable Standard

5 Rated voltage (volts)

6 Type & Category

7 Suitable for earthed or unearthed system

8 Continuous current rating when laid in air in a ambient temp. of 50°C and for maximum conductor temp. of 70°C of PVC Cables (For information only)

9 Ration factors applicable to the current ratings for various conditions of installation.

10 Short Circuit capacity

a)Guaranteed short circuit Amp. (rms) KA for 0.12sec duration at rated conductor temperature of 90 degree C, with an initial peak of 105kA.

b). Maximum conductor temp. allowed for the short circuit duty (deg. C) as stated above.

c) Cross section area (Sq.mm)

d) Number of wires (No.) minimum

e) Form of conductor

f) Direction of lay of stranded layer

12 Conductor resistance (DC) at 20°C per km - maximum

a) Composition of insulation

b) Nominal thickness of insulation (mm)

c) Minimum thickness of insulation

14 Inner Sheath

b) Calculated diameter over the laid up cores, (mm)

c) Thickness of sheath (minimum) mm

a) Type and material of armour

b) Direction of armouring

c) Calculated diameter of cable over inner sheath (under armour), mm

d) Nominal diameter of round armour wire (minimum)

e) No. of Armour wires/stripes

f)Short circuit capacity of the armour along for 1 second – for info. Only

g) DC resistance at 200C (Ω/Km)

16 Outer sheath

a) Material (PVC Type)

b) Calculated diameter under the sheath

c) Min. thickness of sheath (mm)

d) Colour of Sheath

a) Guaranteed value of minimum oxygen index of outer sheath at 270C *

b)Guaranteed value of minimum temperature index at 21 oxygen index *

c). Smoke density rating as per IEC 61034 *

d). Maximum HCL emission as per IEC 60754-1 *

e)All the factory acceptance test to be done as per relevant IS/IEC and KPTCL specification

18 a)Overall diameter of cable

b). Tolerance of overall diameter (mm)

a) Max./standard length per drum for each size of cable (single length) with ±5% Tolerance (mtrs)

b) Non standard drum lengths

20 Whether progressive sequential marking on outer sheath provided at 1 meter interval

21 Identification of cores

a) Colour of cores

22 Whether cables offered are ISI marked

23 Whether cables offered are suitable for laying as pr IS 1255

24 1.0 Continuous current rating of the cable

a) In ground at soil temperature 30°C and soil thermal resistivity of 150°C cm/watt and depth of burial about a metre (A)

b) In air at 40°C (A)

c) Overload capacity and duration (A, Hr)

d) Derating Factors for :

i) Soil temperature and thermal resistivity

ii) Ambient temperature

iii) Single core cables laid in trefoil circuits

2) General Technical Data (Power cables)

2.1) Equivalent star impedance per km of 3 Ph, circuit at power frequency at maximum conductor temperature (Ohm)

2.2) Maximum electrostatic capacitance per core per km of cable (F)

2.3) Maximum charging current per conductor per km at nominalvoltage (A)

2.4) Loss tangent at normal frequency and rated voltage

2.5) Maximum dielectric loss of cable per km at normal voltage and frequency Watts/km

2.6) Short circuit capacity for 1 Sec. KA (rms)

2.7) Short Circuit current capacity of armour (kA for 1 sec)

2.8) Maximum dielectric stress at core screen (kV/cm)

2.9) Maximum overall dia. of cable (mm)

3.0) Construction details including type of material used and thickness of each material for each type of cable in a tabular form.

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3726

Combined Package for, Work-A: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Karaya Sub station in Belthangady Taluka , Dakshina Kannada District Work-B: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Konaje Sub station in Ullala Taluka , Dakshina Kannada District Work-C: Providing additional 1X20 MVA , 110/33 kV Transformer and 33 kV bay at 110/33/11 kV Nittur Sub Station in Udupi Taluka & District Work-D: Creation of 33 kV Reference by providing 2X20 MVA , 110/33 kV Power Transformer along with 33 kV Terminal Bays at 110 kV Karkala Sub Station in Karakala Taluka , Udupi District Work E- Replacement of 2X10 MVA, 110/11 kV Power Transformers by 2X20 MVA 110/11 kV Power Transformer along with providing additional 11 kV Switchgear and replacement of indoor type old, retrofitted 11 kV switchgear by new 11 kV MCVCB outdoor Switchgear at 110 kV Halady Sub Station in Kundapura Taluka, Udupi District Work F- Balance portion of works pertaining to work of construction of 1 No of 110 KV Terminal Bay for the 110 kV Karaya Line at the existing 110/33/11 KV Sub Station at Puttur in Puttur Taluka, Dakishna Kannada District. on Partial Turnkey Basis, including Supply of all Materials/Equipments(Excluding supply of 11kV Switchgear) and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning

GUARANTEED TECHNICAL PARTICULARS FOR CONTROL CABLE

(Bidder should indicate the guaranteed technical date of all equipments/materials for each type of rating separately)

SL. No PARTICULARS

3 Manufacturer’s type designation

4 Applicable Standard

5 Rated voltage (volts)

6 Type & Category

7 Suitable for earthed or unearthed system

8 Continuous current rating when laid in air in a ambient temp. of 50°C and for maximum conductor temp. of 70°C of PVC Cables (For information only)

9 Ration factors applicable to the current ratings for various conditions of installation.

10 Short Circuit capacity

a)Guaranteed short circuit Amp. (rms) KA for 0.12sec duration at rated conductor temperature of 90 degree C, with an initial peak of 105kA.

b). Maximum conductor temp. allowed for the short circuit duty (deg. C) as stated above.

c) Cross section area (Sq.mm)

d) Number of wires (No.) minimum

e) Form of conductor

f) Direction of lay of stranded layer

12 Conductor resistance (DC) at 20°C per km - maximum

a) Composition of insulation

b) Nominal thickness of insulation (mm)

c) Minimum thickness of insulation

14 Inner Sheath

b) Calculated diameter over the laid up cores, (mm)

c) Thickness of sheath (minimum) mm

a) Type and material of armour

b) Direction of armouring

c) Calculated diameter of cable over inner sheath (under armour), mm

d) Nominal diameter of round armour wire (minimum)

e) No. of Armour wires/stripes

f)Short circuit capacity of the armour along for 1 second – for info. Only

g) DC resistance at 200C (Ω/Km)

16 Outer sheath

a) Material (PVC Type)

b) Calculated diameter under the sheath

c) Min. thickness of sheath (mm)

d) Colour of Sheath

a) Guaranteed value of minimum oxygen index of outer sheath at 270C *

b)Guaranteed value of minimum temperature index at 21 oxygen index *

c). Smoke density rating as per IEC 61034 *

d). Maximum HCL emission as per IEC 60754-1 *

e)All the factory acceptance test to be done as per relevant IS/IEC and KPTCL specification

18 a)Overall diameter of cable

b). Tolerance of overall diameter (mm)

a) Max./standard length per drum for each size of cable (single length) with ±5% Tolerance (mtrs)

b) Non standard drum lengths

20 Whether progressive sequential marking on outer sheath provided at 1 meter interval

21 Identification of cores

a) Colour of cores

22 Whether cables offered are ISI marked

23 Whether cables offered are suitable for laying as pr IS 1255

24 1) Continuous current rating of the cable

a) In ground at soil temperature 30°C and soil thermal resistivity of 150°C cm/watt and depth of burial about a metre (A)

b) In air at 40°C (A)

c) Overload capacity and duration (A, Hr)

d) Derating Factors for :

i) Soil temperature and thermal resistivity

ii) Ambient temperature

iii) Single core cables laid in trefoil circuits

2) General Technical Data (Power cables)

2.1) Equivalent star impedance per km of 3 Ph, circuit at power frequency at maximum conductor temperature (Ohm)

2.2) Maximum electrostatic capacitance per core per km of cable (F)

2.3) Maximum charging current per conductor per km at nominalvoltage (A)

2.4) Loss tangent at normal frequency and rated voltage

2.5) Maximum dielectric loss of cable per km at normal voltage and frequency Watts/km

2.6) Short circuit capacity for 1 Sec. KA (rms)

2.7) Short Circuit current capacity of armour (kA for 1 sec)

2.8) Maximum dielectric stress at core screen (kV/cm)

2.9) Maximum overall dia. of cable (mm)

3.0) Construction details including type of material used and thickness of each material for each type of cable in a tabular form.

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

Bid Enquiry No: KPTCL/2026-27/SS/WORK_INDENT 3726

Combined Package for, Work-A: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Karaya Sub station in Belthangady Taluka , Dakshina Kannada District Work-B: Replacement of 1X10 MVA, 110/11 kV transformer by 1X20 MVA , 110/11 kV transformer at 110 kV Konaje Sub station in Ullala Taluka , Dakshina Kannada District Work-C: Providing additional 1X20 MVA , 110/33 kV Transformer and 33 kV bay at 110/33/11 kV Nittur Sub Station in Udupi Taluka & District Work-D: Creation of 33 kV Reference by providing 2X20 MVA , 110/33 kV Power Transformer along with 33 kV Terminal Bays at 110 kV Karkala Sub Station in Karakala Taluka , Udupi District Work E- Replacement of 2X10 MVA, 110/11 kV Power Transformers by 2X20 MVA 110/11 kV Power Transformer along with providing additional 11 kV Switchgear and replacement of indoor type old, retrofitted 11 kV switchgear by new 11 kV MCVCB outdoor Switchgear at 110 kV Halady Sub Station in Kundapura Taluka, Udupi District Work F- Balance portion of works pertaining to work of construction of 1 No of 110 KV Terminal Bay for the 110 kV Karaya Line at the existing 110/33/11 KV Sub Station at Puttur in Puttur Taluka, Dakishna Kannada District. on Partial Turnkey Basis, including Supply of all Materials/Equipments(Excluding supply of 11kV Switchgear) and Erection (including dismantling & Civil Works) of all Materials/Equipments, Testing and Commissioning

GUARANTEED TECHNICAL PARTICULARS FOR MCVCB / PCVCB 11KV SWITCH GEAR COMPONENTS

(Bidder should indicate the guaranteed technical data of all equipment/materials for each type of rating separately)

1) Type of instrument

3) Whether magnetically shielded or not

4) Scale length and range

5) Whether tropicalised VOID

6) Short time overload capacity

7) VA burden current coil

8) Power consumption of current coil

9) ISS grade of accuracy

10) Description leaflet

11) Temperature at which instrument calibrated