REPAIR TO ROADS, ROAD BERMS, PAINTING AND ROAD FURNITURE AT CQAV AND DAD COMPLEX UNDER GE (S) AHMEDNAGAR

Amount

Repairs to pot holes exc 30mm deep and n' exc 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths etc. cutting around edges to at least 25 mm in depth, making good by applying tack coat @ 5 kg per 10 Sqm of paving bitumen,VG-10 putting in premixed bituminous macadam well rammed and sealed with 9.8 kg of binder per 10 Sqm, blinded with 0.09 cum of stone chippings, 6.3mm size and again well rammed (including supply of premixed macadam,binder and chipngs), complete all as specified & directed.

Scarifying or picking gravelled, macadam or bituminous macadam surface in area n exc 400 sqm exc 50 mm and n exc 100 mm thick.

M&L for 75 mm thick (compated thickness) Wet Mix Mecadam grading (WMM) grading as per table 400-13 of MORT&H specification,for road and bridge works 2013manufactured in WMM Plant material comprising of clean,crushed, graded aggr. and granular material premixed with water to a dense mass , sreading with sensor paver and rolling with vaibrator roller of capacity 80 to 100kn static waight and consolidatiating to required gradient and and camber complete all as specified and as directed by Engineer-in-Charge

M&L for preparing WBM/WMM surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally cleaning the surfaces with mechanical compressor to remove all loose dirt etc and applying evenly priming/ tack coat with bituminous primer (paving VG - 10 grade bitumen) @7.50 Kg per 10 Sqm complete all as specified and directed.

M&L for premix bituminous macadam( consolidated thicknes 75mm or less) with 4 % binder content using paving bitumen of VG-30 grade by weight of total mix laid/rolled and compacted to required camber and gradient complete all as specified and directed.

M&L for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally cleaning the surfaces with mechanical compressor to remove all loose dirt etc and applying evenly priming/ tack coat with bituminous primer (paving VG - 10 grade bitumen) @2.50 Kg per 10 Sqm complete all as specified and directed.

M&L for Bituminous premix asphaltic semi dense concrete 40mm consolidated thickness with 5.00% binder content by weight of total mix, rolled and compacted to required camber and gradient complete using paving bitumen of penetration VG-30, layed to required camber and gradient with mechanical paver and rolled to a uniform smooth surface all as specified and directed

M&L for Bituminous premix asphaltic semi dense concrete 30mm consolidated thickness with 5.00% binder content by weight of total mix, rolled and compacted to required camber and gradient complete using paving bitumen of penetration VG-30, layed to required camber and gradient with mechanical paver and rolled to a uniform smooth surface all as specified and directed

M & L for preparing bituminous surfaces of road and marking 2.00mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.

Supply and fixing in repairs metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermoplastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed

Supply and fixing in repair ABS plastic bumps/speed breakers in parabolic convex shape and of size 750mm X 250mm X 70mm made out of steady plastc, dovetail interlocking sub units, jointed and fixed to make the bump perfectly uniform, made with precoloured material (Black/Yellow) and UV stabilizer to keep perfectly colourful, studded with with reflectors on either side to make it clearly visible to motorists during night hours complete all as specifide and directed.

Supply and fixing in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20 mm with PAMA strplens relector of model No DA 972.0 fixed with and incl MS stud of of suitable size as per manufacturers instructions. Make 3M/Green lite

Supply and fix in repair solar cat eye alumnium alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 1,000 to 18,000 mcd completed as per manufacturers instructions etc all as specified and directed. Make: 3M/Green lite

S&F in repair Unbreakable 800mm dia convex mirror / security mirror/ traffic mirror for road safety with installation kit & adjustable fixing bracket (nuts & Bolts) ISO Certified 9001:2015, mounted on 65mm x 65mm x 4mm hollow section and height of 2.10m upto top of the board above GL and inserted in PCC 1:2:4 type B-1 using 20mm graded coarse stone aggregates of size 0.3 x 0.3 m x 0..30m below GL , complete all as specified and directed by the Engr-in-chagre..

Manufacturing, supplying and fixing in repairs retroreflective Mandatory/ Regulatory sign boards of 900 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours). Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer-in-charge.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete

M&L preparation of new or previously untreated surfaces of any description over 10cm girth or width, not otherwise described and applying two coats of synthetic enamelled paint over a coat of primer all as specifide and directed.

M&L preparation of old painted surfaces of any description over 10cm girth or width, not otherwise described and applying one coats of synthetic enamelled paint all as specifide and directed.

M&L for manufacturing, supplying and fixing retro reflective Informatory sign boards, single side of both side visibility of size per drawing enclosed, made up of 2mm thick aluminium sheet, face to be fully covered with high intensity escapsulated type heat activated retro reflective sheeting conforming to type –IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter (size, any number) message (bi-Lingual), symbols and borders etc as perIRC:67 2001, pasted on substrate by an adhesive backing shall be activated by applying heat and pressure conforming to class-2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminum alloy rivets @ 20mm c/cto back support frame of stainless steel 303 grade round pipes mounted and fixed as per drawing, embedded in cement concrete 1:4:8 type D2 and including making holes in pipes, angle flats, providing & fixing ACP message plate of required size, back side of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat, all leads, lifts taking down existing sign board complete as per drawing (GE WD 33).

Sameer S Shaikh

AZAD SERVICES

Aakar Constructions