Renovation/Up-gradation of 132KV (DC) Wanpoh Awantipora LILO bay replacement of old detorated 33KV equipments and conductor Augmentation at 132/33KV GSS Wanpoh

Amount

(A) Renovation/up-gradation of 132 Kv (DC) Wanpoh-Awantipora LILO Bay

Surveying of the line for identification of site of new D+3 Kamani tower including tower spotting, pit marking and checking of alingment critical point and framing of approved tower profile and schedule including site clearance & crop compensation if required

Earth Work excavation of foundation pits including all Labour, T&P, leads & lifts, stockpiling, making of working space, carriage, disposal of excaveted soil, backfilling including cost of borrowed good earth & dressing of surplus excavated earth and dewatering during excavation including site cleareance

Close timbering in trenches including strutting and shoring complete. Only forPartially Submerged and Fully Submerged Foundations

Depth exceeding 1.5m but not exceeding 3m

Reinforcement for R.C.C. work including straightning, cutting,bending, placing in position and binding all complete bars (TMT) including all carriages(manual and mechanical)

Thermo-Mechanically Treated bars of grade Fe-500D or more.

Supply Of Stubs and cleats(as per drawing)

Stub setting including transportation, carriage of Stubs & Templates.

Providing and laying in position cement concrete of specified grade including curing ,Carriage of materials Mechanical & Mannual but excluding th cost of centring and shuttering.All workupto plinth level with:

1:3:6 (1cement:3coarse sand:6 graded stone aggregate 40mm nominal size) with stone solling 20 cm in depth

Providing and laying in position specified grade of reinforced cement concrete including curing Carriage of materials Mechanical & Mannual but excluding the cost of centering, shuttering, finishing and reinforcement. All works up to plinth level (M25) including all carriages and dewatering

Centering and shuttering including strutting, propping etc.and removal of form work for:

Foundations,footings,bases for columns

Providing and fixing of pipe earthing including earth resistivity including counterpoise whereever required.

MATERIAL PART

Fabrication, Galvanisation and Supply of Lattice Type Steel Tower Structures

Galvanised Nuts & Bolts with Washers

Tower Accessories

Danger Plates

Number Plates

Circuit Plates

Phase Plate

Anti Climbing Devices

Bird Guard

Line Material & Accessories

ACSR 400 sqmm

Conductor Accosseries for 400 sqmm ASCR

Mid Span Compression Joint

Vibration Dampers

Repair Sleeves

Aluminium Tap

Earthwire Accessories

Mid Span Compression Joint

Vibration Dampers

Hardware Fittings Suitable For 400 sqmm ASCR

Single Suspension Fittings

Single Tension Fittings

Aluminium alloy T Clamps 400 sqmm

Clamps for OPGW

Insulators

120 KN ball & socket type Porcelain Disc Insulators

Other equipments

145kV, 50c/s , 2000 Amp, 31.5kA for one second, Ac motor operated horizontal double break, outdoor type 3 pole Isolators without Earthing Blades

4 Core, 2.5 sq mm, 1100 V, PVC insulated, PVC sheathed, FRLS, galvanised steel wire/ strip armoured stranded copper conductor control cable complete

8 Core, 2.5 sq mm, 1100 V, PVC insulated, PVC sheathed, FRLS, galvanised steel wire/ strip armoured stranded copper conductor control cable complete

Marshalling kiosk with Kiosk frames mild steel structural sections for pressed and shaped cold-rolled sheet steel, thickness not less than 2.0 mm. Frames shall be enclosed in cold-rolled sheet steel of thickness not less than 1.6 mm. Doors and covers shall also be cold rolled sheet steel of thickness not less than 1.6 mm. complete structures shall be rigid, self?supporting, free from flows, twists and bends. Dust and vermin proof construction and shall be provided with a degree of protection of IP: 55, with Copper Bar earthing. Finishing paint on panels shall be of shade 692 (smoke grey) of IS: 5. The inside shall be properly stoved. The paint thickness shall be at least 50 microns.

Dismantling/ re-erection

Dismantling of existing 132 Kv Awantipora LILO Bay equipment structures, CT's 'PT's & LA's etc.

Re-erection of dismantled 132 Kv Awantipora LILO bay structure, CT's, PT's & LA;s etc.

Dismantling of existing D Type tower, 02 No. 132 Kv Isolators, panther conductor including insulators, fittings, jumpers & other allied accessories & returing of same to the divisional stores at awantipora

Erection Part

Erection of 01 No. D+3, Kamani tower complete with Nuts & Bolts including, transportation to site, tag welding and application of Zinc Rich Paint, Pipe earthing & crop compensation (complete)

Erection of Tower Accessories

Danger Plates

Number Plates

Circuit Plates

Phase Plate

Anti Climbing Devices

Bird Guards

Laying & Stringing of 400 sqmm ACSR conductor /Earth wire including installation of insulator strings, hardware fittings, arching horns, vibration dampers, jumpring, compression joints (if required) and other accessories including transportation to site and temporary anchoring of towers.(Including 1.5% sag)

Laying & Stringing of OPGW Wire including installation of hardware clamps, vibration dampers, jumpring, compression joints (if required) and other accessories including transportation to site and temporary anchoring of towers..(Including 1.5% sag)

Testing & Commissioning of Transmission Line

Execution of Other equipments

145kV, 50c/s , 2000 Amp, 31.5kA for one second, Ac motor operated horizontal double break, outdoor type 3 pole Isolators without Earthing Blades

4 Core, 2.5 sq mm, 1100 V, PVC insulated, PVC sheathed, FRLS, galvanised steel wire/ strip armoured stranded copper conductor control cable complete

8 Core, 2.5 sq mm, 1100 V, PVC insulated, PVC sheathed, FRLS, galvanised steel wire/ strip armoured stranded copper conductor control cable complete

Marshalling kiosk with Kiosk frames mild steel structural sections for pressed and shaped cold-rolled sheet steel, thickness not less than 2.0 mm. Frames shall be enclosed in cold-rolled sheet steel of thickness not less than 1.6 mm. Doors and covers shall also be cold rolled sheet steel of thickness not less than 1.6 mm. complete structures shall be rigid, self?supporting, free from flows, twists and bends. Dust and vermin proof construction and shall be provided with a degree of protection of IP: 55, with Copper Bar earthing. Finishing paint on panels shall be of shade 692 (smoke grey) of IS: 5. The inside shall be properly stoved. The paint thickness shall be at least 50 microns.

Cable Ducts With Covers as per the design of existing

Sub Main Duct of Size 600mm x 600mm with 6 mm M.S Chequered Trench Covers of size 700x500 mm

Civil Works

Concreting and laying of Yard metal

Surface dressing of ground removal of inequalities less than 15cms ( de- vegetation)

Supply & laying stone soling 100mm thick including mechanical from nearest source & mannual carriage

Providing & laying Cement Concreate 1:3:6, 100mm Thick including mechanical from nearest source & mannual carriage

Supply, spreading & levelling of metal Crushed (Aggregate 40 mm size) (1150X0.10) including mechanical from nearest source & mannual carriage

Design & laying of Earth Mat as per approved design

Earth work excavation

Manual carriage of disposable earth beyond 100mts (60% of Excavated earth)

Mechanical carrige of Disposable earth at an average lead of 5 Km

Supply of good and soft earth including filling, levelling & Royality etc

Mechanical carrige of good earth at an average lead of 20 Km

Manual carriage of good earth from unloading site to site of work

Loading and unloading of earthing material

Laying of 100mts of MS Flat/ Round steel

Surface cleaning ,jointing by welding etc

Driving of Spikes

Providing of Steel, galvanised Flat iron 75mmx12mm/50mmx6mm) and 40mm dia round steel bars

Laying of 02 No. 132KV isolator Foundations, 06 No. PT foundations, 06 No. CT foundations & 06 No. LA foundations.

Earth work in excavation by mechanical means (Hydraulic excavator) over areas ( exceedind 30 cm in depth 1.5 mtr in width as well as 10 sq.m on plan ) including disposal of excavated earth, lead upto 50 m. & , lift upto 1.50 m disposad earth to be levelled and neatly dressed in All kinds of soil

Providing and laying of lean pad 1:4:8 with 40mm crushed stone aggregate 4.0x4.0x0.10

Form work

Providing and laying of RCC conc. 1:1.5:3 (M20) with 20mm bajri

Mech.transport of construction material average lead 20 km

20mm bajri

40mm bajri

Manual carriage of construction of material from unloading site to site of work lead 100 mtr

20mm bajri

40mm bajri

Back filling

Excavation of good earth in soft soil

Mech carriage of good earth av lead 20km

Manual carriage of good earth from unloading site to site of work av distance 100 mtr

Manual carriage of disposable soil upto loading site av distance 100 mtr

Mech transportation of disposable soil av lead 3 km

Providing of tor steel reinforcement including cutting , bending & binding

Manual carriage of cement Av. 100 mtr

Manual carriage of steel

Providing & fixing of stubs as per approved drawing

(B) Replacemnet of old detorated 33 Kv equipments and conductor

Design, Engineering, Manfacture, Shop Testing, Supply including packing and forwarding, Transportation and delivery at site as per Technical Specifications and approved drawings

33KV VCB (36 KV, 1250 Amps of 3 phase, 50 c/s and 25KA for 3 sec) outdoor type with all accessories and auxiliaries

36kV, 50c/s , 2500 Amp, 25kA for one second, Ac motor operated horizontal double break, outdoor type 3 pole Isolators without Earthing Blades

36kV, 50c/s , 2500 Amp, 25kA for one second, Ac motor operated horizontal double break, outdoor type 3 pole Isolators with One Earthing Blades

Single phase, 50 c/s 36KV Current Transformers (1200-600-300 /1-1-1 A or as per site specifications) , 25KA for one second, rated dynamic current 25KA(peak), Class A insulation, Burden 20 VA

8 Core, 2.5 sq mm, 1100 V, PVC insulated, PVC sheathed, FRLS, galvanised steel wire/ strip armoured stranded copper conductor control cable complete

16 Core, 2.5 sq mm, 1100 V, PVC insulated, PVC sheathed, FRLS, galvanised steel wire/ strip armoured stranded copper conductor control cable complete

4 Core, 6 sq mm, 1100 V, PVC insulated, PVC sheathed, FRLS, galvanised steel wire/ strip armoured stranded copper conductor control cable complete

500 mm2 ACSR Conductor moose

Single tension fittings for twin 500 mm2 moose

Single suspention fittings for twin 500 mm2 moose

T clamps 500mm2/500mm2

Isolator pad clamps 500mm2/500mm2

Tubular bus clamp (100 mm Dia) 500mm2

Spacers For Twin 500mm2 must be one-piece construction of aluminum alloy of an approved type without any projection, cuts, abrasions etc. or chattering parts and shall conform to IS:10162

P I Clamps made of Alluminium Alloy and shall comply in all respects with IS:5561-1970 (latest edition)

Handling, Storage, Preservation, Erection, Testing and commissioning of equipments and material including all comsumables required for 50 MVA Power Transformer, 33 KV VCB's, 32 & 33 KV surge arrestors including Ferrules, Lugs, Printed sleeves, cable ties, cable glands, Tags, minor cutting, wielding works etc. complete in all respects

33KV VCB (36 KV, 1250 Amps of 3 phase, 50 c/s and 25KA for 3 sec) outdoor type with all accessories and auxiliaries

36kV, 50c/s , 2500 Amp, 25kA for one second, Ac motor operated horizontal double break, outdoor type 3 pole Isolators without Earthing Blades

36kV, 50c/s , 2500 Amp, 25kA for one second, Ac motor operated horizontal double break, outdoor type 3 pole Isolators with One Earthing Blades

Single phase, 50 c/s 36KV Current Transformers (1200-600-300 /1-1-1 A or as per site specifications) , 25KA for one second, rated dynamic current 25KA(peak), Class A insulation, Burden 20 VA

8 Core, 2.5 sq mm, 1100 V, PVC insulated, PVC sheathed, FRLS, galvanised steel wire/ strip armoured stranded copper conductor control cable complete

16 Core, 2.5 sq mm, 1100 V, PVC insulated, PVC sheathed, FRLS, galvanised steel wire/ strip armoured stranded copper conductor control cable complete

4 Core, 6 sq mm, 1100 V, PVC insulated, PVC sheathed, FRLS, galvanised steel wire/ strip armoured stranded copper conductor control cable complete

500 mm2 ACSR Conductor moose

Single tension fittings for twin 500 mm2 moose

Single suspention fittings for twin 500 mm2 moose

T clamps 500mm2/500mm2

Isolator pad clamps 500mm2/500mm2

Tubular bus clamp (100 mm Dia) 500mm2

Spacers For Twin 500mm2 must be one-piece construction of aluminum alloy of an approved type without any projection, cuts, abrasions etc. or chattering parts and shall conform to IS:10162

P I Clamps made of Alluminium Alloy and shall comply in all respects with IS:5561-1970 (latest edition)

CIVICTRA ENGINEERING AND CONSTRUCTIONS (BID ID -2361986)