Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.0 LAccepted-Finance OLD NO 4 263 NEW NO 5B 345 ANTHONIARPURAM SELSEENI COLONY TUTICORIN 628 008 | TUTICORIN | TAMIL NADU | 628008 | L1 | Accepted-Finance BOQ Accepted | |
| 2 | L2₹6.3 L+₹36,078 (6.06%)Accepted-Finance 4 9 2 ETTAYAPURAM ROAD NEAR A P C MAHALAKSHMI COLLEGE TUTICORIN 2 | L2 | Accepted-Finance BOQ Accepted |
| Sl No | Description | Qty | Unit | VEL ENGINEERING L2 | MARIA LAKSHMI ENTERPRISES L1 |
|---|---|---|---|---|---|
| 1.00 | Charges for loading & transporting of pulley from Central stores / TTPS to private work shop for reconditioning and transporting back the finished Pulleys and retrieved scraps to central stores. cutting and removal of worn out outer shell and end plates 2 Nos from the pulley by using cutting gas without damaging the shaft and hub, sizing of new MS plate by cutting machine and rolling to the required size Cutting & sizing, turning the shell width and machining to required dimension on the lathe, fabrication of new end disc to correct dimension by cutting the M.S. plate 25mm thick and machining the M.S. plate to get good surface finish two numbers, loading centering and machining of new 2 Nos end disc to correct dimension, loading the New EN8 shaft on the lathe and machining full length of the shaft for trueness checking - turning and step turning with micro finishing to suit plummer block seating area and hub seating area, loading the shaft in the slotting machine and forming key ways in three different locations, fabrication and machining of 2 nos new hubs to suit the end disc and the shaft locations, fabrication and machining of 2 Nos key as per required dimensions, fabrication of re-inforcemet frame by using 16mm thick M.S. plate to provide centre of the pulley, Machine the frame on both inner and outer side to position the same on outer dia of shaft and inner dia of shell, Fitting and welding the frame on inside the pulley, assembling of all the items of pulley, both hubs hot oil bathed and fitted in the shaft in hot condition, welding works in pulley shell end disc and stiffeners and shell & hub etc, pulley stress relieving and static balancing and check up including T&P's hire charges and cost of consumables etc. | 3 | No. | 5,55,000 ₹6,54,900 | 5,23,500 ₹6,17,730 Lowest |
| 2.00 | Cost of EN8 Shaft for Conveyor-28A | 1 | No. | 10,500 ₹12,390 | 9,850 ₹11,623 Lowest |
| 3.00 | Cost of HUB (MS) for Conveyor-28A | 2 | No. | 5,400 ₹6,372 | 5,100 ₹6,018 Lowest |
| 4.00 | Cost of End disc (MS) for Conveyor-28A | 2 | No. | 5,800 ₹6,844 | 5,600 ₹6,608 Lowest |
| 5.00 | Cost of Key EN8 for Conveyor-28A | 2 | No. | 210 ₹247.8 | 192 ₹226.56 Lowest |
| 6.00 | Cost of Welding rod E 7018 (MS) for Conveyor-28A | 179 | No. | 2,327 ₹2,745.86 | 1,969 ₹2,323.42 Lowest |
| 7.00 | Cost of EN8 Shaft for Conveyor-28B | 1 | No. | 10,500 ₹12,390 | 9,900 ₹11,682 Lowest |
| 8.00 | Cost of HUB (MS) for Conveyor-28B | 2 | No. | 4,400 ₹5,192 | 4,200 ₹4,956 Lowest |
| 9.00 | Cost of End disc (MS) for Conveyor-28B | 2 | No. | 9,400 ₹11,092 | 9,000 ₹10,620 Lowest |
| 10.00 | Cost of Key EN8 for Conveyor-28B | 2 | No. | 210 ₹247.8 | 192 ₹226.56 Lowest |
Tender Value
Refer Docs
EMD Value
₹6,700
Closing Date
21 Sept 2026, 2:00 pmClosed
Chief Engineer/TTPS
O/o CE/TTPS
ICHP- Reconditioning of take up pulley for Conveyor-28A and bend pulleys for Conveyor-28B 25A by providing necessary shaft, end disc, hub stiffeners and keys
2026_EB_701655_1
CE/TTPS/SE/MI/90/2026-2027
Open Tender
Miscellaneous Works
Works
60 days
TTPS
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹6,700
Yes
25 Sept 2026
5 Sept 2026
22 Sept 2026
5 Sept 2026
21 Sept 2026
5 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Charges for loading & transporting of pulley from Central stores / TTPS to private work shop for reconditioning and transporting back the finished Pulleys and retrieved scraps to central stores. cutting and removal of worn out outer shell and end plates 2 Nos from the pulley by using cutting gas without damaging the shaft and hub, sizing of new MS plate by cutting machine and rolling to the required size Cutting & sizing, turning the shell width and machining to required dimension on the lathe, fabrication of new end disc to correct dimension by cutting the M.S. plate 25mm thick and machining the M.S. plate to get good surface finish two numbers, loading centering and machining of new 2 Nos end disc to correct dimension, loading the New EN8 shaft on the lathe and machining full length of the shaft for trueness checking - turning and step turning with micro finishing to suit plummer block seating area and hub seating area, loading the shaft in the slotting machine and forming key ways in three different locations, fabrication and machining of 2 nos new hubs to suit the end disc and the shaft locations, fabrication and machining of 2 Nos key as per required dimensions, fabrication of re-inforcemet frame by using 16mm thick M.S. plate to provide centre of the pulley, Machine the frame on both inner and outer side to position the same on outer dia of shaft and inner dia of shell, Fitting and welding the frame on inside the pulley, assembling of all the items of pulley, both hubs hot oil bathed and fitted in the shaft in hot condition, welding works in pulley shell end disc and stiffeners and shell & hub etc, pulley stress relieving and static balancing and check up including T&P's hire charges and cost of consumables etc. | 3 | No. | 78.6 | ₹235.8 |
| 2 | Cost of EN8 Shaft for Conveyor-28A | 1 | No. | 38.5 | ₹38.5 |
| 3 | Cost of HUB (MS) for Conveyor-28A | 2 | No. | 5,155.5 | ₹10,311 |
| 4 | Cost of End disc (MS) for Conveyor-28A | 2 | No. | 470.9 | ₹941.8 |
| 5 | Cost of Key EN8 for Conveyor-28A | 2 | No. | 9,007.3 | ₹18,014.6 |
| 6 | Cost of Welding rod E 7018 (MS) for Conveyor-28A | 179 | No. | 90.5 | ₹16,199.5 |
| 7 | Cost of EN8 Shaft for Conveyor-28B | 1 | No. | 5,533.1 | ₹5,533.1 |
| 8 | Cost of HUB (MS) for Conveyor-28B | 2 | No. | 284.1 | ₹568.2 |
| 9 | Cost of End disc (MS) for Conveyor-28B | 2 | No. | 277 | ₹554 |
| 10 | Cost of Key EN8 for Conveyor-28B | 2 | No. | 87.7 | ₹175.4 |
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.28 MB
BOQ_843389.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .