Repair to joinery, Flooring and other connected works in Md Accn of Shekhawati Line, NPG Line, Hazipir Line of AGE B/R-I under GE (West) Delhi Cantt-10.

Amount

Taking down shutters of any description area n. exc 1.00 Sqm each complete all as specified & directed. Note : Window glazed /without glazed shutter remove through cutting and without distrubing window guard bar .

Taking down shutters of any description area exc 1.00 Sqm but n.exc 2.00 sqm each complete all as specified & directed.

Taking down chowkhats or frames with shutters (without taking off shutters from frames) area n.exc 1.5 sqm each complete all as specified & directed.

Taking down chowkhats or frames with shutters (without taking off shutters from frames) area exc 1.5 sqm but n.exc. 4.00 sqm each complete all as specified & directed.

S&F PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supply & fixing in opening and making good disturbed surfaces of jambs by matching with existing treatment complete all as specified & directed.

S&F factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rail, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement supplying and fixing in the frame at site complete all as specified & directed.

S&F mild steel framed work as in door or gates of angle or other sections, cooler stands, with gusset plates rails, braces etc complete drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and purpose made hinges or steel sheeting or other covering, running rails and guides) and hanging, fastening and fixing complete conforiming to Fe 290 Gde E-165 complete all as specified & directed.

S&F 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkat complete all as specified and directed.

S &F factory made 35mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part-I). klin seasoned and chemically pressure treated complete all as specified and directed.

M&L for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apperture 1.40 mm fixed to door/window frame complete all as specified and directed.

S&F butt hinges 100mm size, medium weight cold rolled mild steel and fixed to angle iron /steel chowkhat complete all as specified and directed.

S&F 100mm butt hinges type B-21, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed complete all as specified & directed.

S&F aluminium anodised barrel tower bolt, extruded section 200mm size complete all as specified and directed.

S&F aluminium anodised Handles for 150mm size complete all as specified and directed.

S&F 300mm aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixingclips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

M&L for Preparation of new or previously untreated surfaces of wood or wooden base surface of any description not otherwise described over 10cm width or grith and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified & directed.

M&L for Preparation of new or previously untreated surfaces of steel surface of any description not otherwise described over 10cm width or grith and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified & directed.

S&F 4.0 mm thick figured glass/ pin head type and glazing in squares not exc 0.5 Sqm in each pane complete all as specified and directed.

S&F 4.8 mm thick sheet glass ordinary quality and glazing in square not exc 0.5 Sqm in each pane complete all as specified and directed.

S&F powder coated aluminium frame for doors, windows, beading for grill with one or more rebates including joining cleat for fixing etc.complete all as specified & directed. (minimum thickness of powder coating 50 micron ).

S&F powder coated aluminium window and ventilator shutters, side hung type with/ without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1 No), hinges type B-21, 100mm long (2 Nos) suitable handle (1 No) complete all as specified and directed.

S&F powder coated (minium thickness of powder coating 50 micron) aluminium section for shutters suitable for three/four track window and aluminium section weighting more than 0.5 kg/m of sliding members incl all necessary fittings and fixtures, jointing cleats, rubber packing, locking handle , bush and 'U' channel etc complete all as specified and directed.

S&F 25mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides as shutter of cupboard complete all as specified and directed.

S&F 100 mm hasp and staple, mild steel stove enamelled black. Including bolt to hinges plate and fixed with screws complete all as specified & directed.

S&F aluminium anodised Handles for 100mm size complete all as specified and directed.

M&L for joint free non skid colour ceramic tiles 6-7mm thick (square/rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 sqm, in floors etc, set jointed in neat cement slurry & pointed in coloured cement to match and including 15 mm thick screed bed in CM (1:6) incl dismantling floor hearth or wall tiling incl cement mortar bedding, terrazo dado, (incl backing) removing services and tiles to store and rubbish off the premises complete all as spd and directed.

M&L for Glazed ceramic tiles in vertical surface, 7mm thick (square / rectangular) area of each tile 300x450x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile over and including 10mm thick backing coat in CM 1:4 on fair faces of brick work or concrete surfaces incl dismantling floor hearth or wall tiling incl cement mortar bedding, terrazo dado, (incl backing) removing services and tiles to store and rubbish off the premises complete all as specified and directed.

M & L Rendering 12-15mm thick in Ready Mix Mortar on brick work or concrete surfaces of wall (Internal) and finished even and smooth including taking down cement plaster any description from wall surface and removing rubbish beyond MOD land complete all as specified and directed. Note :( height of bilding up to 4 Storey)

M&L for preparation of newly plastered surfaces and applying two coats of oil bound distemper including priming the wall surfaces complete all as specified and directed . Note :( height of bilding up to 4 Storey)

S&F stainless steel 20mm dia curtain rails with fixing brackets stops and fancy type of rollers etc complete all as specified and directed.

S&F in repairs for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apperture 1.18 mm fixed to door / window (steel/wooden) including necessary beading whereever required complete all as specified & directed.

Supply and fix in repairs 3 mm thick sheet glass ordinary quality incl hacking out old broken glass (any thickness, size,quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads and fixed in aluminium/steel joinery upto 4 storey building height complete all as specified & directed.

Repair and easing of existing steel windows by means of welding, replacements of all necessary fittings,greasing etc.complete all as specified & directed. Note : Minor accessories required for functional windows deems to be incl in the rate quoted by contractor.

S&F in repair butt hinges 100mm size, medium weight cold rolled mild steel and fixed to angle iron /steel chowkhat complete all as specified and directed.

S&F in repair 100mm butt hinges type B-21, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed complete all as specified & directed.

S&F in repair aluminium anodised barrel tower bolt, extruded section 200mm size complete all as specified and directed.

S&F in repair aluminium anodised Handles for 150mm size complete all as specified and directed.

S&F in repair 300mm aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixingclips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

JAIPAL AND BROTHERS

HANUMAN BUILDERS

Chandramauli Engineers Pvt. Ltd.

M/S DSSP Construction Co.

M/S Parmod Johar

S GOURAV PRAKASH ENTERPRISES

B. S BUILDERS

M/S Davinder Kumar