Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.4 LAccepted-AOC HOUSE NO 8 589 BEHIND PHC HOSPITAL OLD BUS STAND KORBA KORBA CHHATTISGARH 495678 | 495678 | L1 | Accepted-AOC Awarded being 1st Lowest Bidder | |
| 2 | L2₹26.6 L+₹4.2 L (18.8%)Rejected-Finance | L2 | Rejected-Finance Awarded being 2ndLowest Bidder | |
| 3 | L3₹28.9 L+₹6.6 L (29.3%)Rejected-Finance KOTHI NO 766 PHASE III MODEL TOWN BATHINDA PB | L3 | Rejected-Finance Awarded being 3rdLowest Bidder |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
25 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Vinod Kumar AE (Civil) AGE BR II Offg GE(S) Bathin
GE(S)Bathinda Bathinda Mil Stn
GE(S) BTD TOKEN NO 37 OF 2023-24 MISC REPAIR ATTENDING DAY TO DAY COMPLAINTS IN OFFR MD ACCN ABDUL HAMID ENCLAVE AND OTM UNITS OF SECTOR I UNDER AGE BR I UNDER GARRISON ENGINEER (SOUTH) BATHINDA AT BATHINDA MILITARY STATION
2023_MES_611147_1
GE(S)/BTD/TOKEN NO 37 OF 2023-24
Open Tender
Civil Works
Item Rate
330 days
GE(S)Bathinda
Class D
category a(i)
11 documents required · 11 mandatory
₹500
GE(S)Bathinda
₹80,000
Yes
27 Sept 2023
28 Jul 2023
28 Aug 2023
28 Jul 2023
25 Aug 2023
11 Aug 2023
Amount
Comprehensive maintenance for Carpentary work by attending day to day complaints of joinery related such as replacement of Builders hardware of doors, windows & cupboard and other Carpentary nature works like easening of door, windows and cupboards. Tightening of screws for tower bolt/Aldrop bolt/ stoppers ,handle hinges in respect to Easening of door / windows/cupboards (SteelWooden/Aluminium) of any description and size by cleaning, adjusting in position and making the same functional incl small repairs if reqd with and incl greasing, oiling, screws/nails for fixing the fittings complete all as specified and directed
Comprehensive maintenance to masonary work by attending day to day complaints of masonary related works such as plastering of wall/ceiling/chajja/making of jambs,soffit,cills etc of size not exceeding 0.25 sqm or on patch work including finishing with distemper/white wash/cement based paint/exterior emulsion paint including two coats of putty as required at site to match with existing surface complete all as specified and directed
Comprehensive maintenance to plumbing work by attending day to day complaints of plumbing nature like leaking bib taps, stop cock of any pattern or of any type including minor repairs to flush cistern, repair to PE-AL-PE composite pressure pipe/GI pipe leakages, removing air blockages if any and refixing old serviceable bib cocks, stop cocks any pattern after minor repairs such as replacement of washers,jumpers and spindle etc complete all as specified and directed. Minor items like thread , Teflon tape, rubber washer shall be deemed to be included in the quoted rates. (any major parts such as jumpers, brass spindles ,caps etc to be measured as supply only and paid for accordingly) complete all as specified and directed
Note for item No 01 to 03. The scope of work is of day to day maintenance nature/ requirement of works. Contractor shall attend the office of AGE B/R-I on daily basis and receive/ collect the complaints/ requirememts of works and shall rectify the repair/maintenance works within time given below :- (a) Minor plumbing complaints - 48 hours (b) Minor Joinery complaints - 48 hours (c) Minor masonary complaints - 48 hours (d) Major Plumbing - 5 days (e) Major Joinery - 15 Days. If contractor fails to rectify the complaints with materials/ items to be replaced if required a penalty @ 50% of quoted rate by the contractors of that particular item shall be recovered from his payment. The responsibility of getting the complaints attended & rectified shall lies with the contractor even if he fails to complete the complaints within 48 hours. In the delayed case of a rectification of complaints even after 48 hours, he shall rectify the same within one week. (Note :- The complaint received from complaint cell shall have to be attended on same day).
Demolition of cement concrete (unreinforced) including tiles of any description & terrazo finish, etc. in ground floors and pavings n. exc 15 cm thickness (below or above ground level) complete all as specified and directed
M & L 75mm thick, cement concrete 1:3:6, type C2 (40mm graded aggregate) as in floors, plinth protection, paths, etc and finishing top surfaces even and smooth (without using extra cement) complete all as specified and directed
Demolition of brick work or stone / boulder masonary, built in cement mortar including all quoins, arches, pillars etc., complete all as specified and directed
M&L brick work with sub class `B' bricks straight or curved on plan exc 6.0m mean radius built in cement mortar 1:6 complete all as specified and directed
M&L brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 but except bricks (old serviceable bricks to be used) complete all as specified and directed Note : The rate includes for cleaning of old bricks.
M&L brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick walls built in CM (1:4), etc; complete all as specified and directed
Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed
M & L 15 mm thick rendering in CM (1:6) on brick surfaces or conc surfaces on walls and finished even and smooth without using extra complete all as specified and directed
M & L 15 mm thick rendering in CM (1:4) using water proofing compound as per manufacturer's instruction (WPC to be measured & paid separately) on brick work or concrete surfaces and finished even and smooth without using extra complete all as specified and directed
M & L for rendering 5 mm thick on concrete surfaces such as ceiling or soffits of chajjas etc; in CM 1:3 finished even and smooth without using extra complete all as specified and directed
Supply only integral water proofing compound of approved quality complete all as specified and directed
M&L for applying two coats of weather proof exterior emulsion paint over a coat of exterior primer over newly plastered wall and ceiling surfaces including cornices & pilasters etc as per manufacturer's specification & instruction; complete all as specified and directed
M &L for applying two coats of white wash on newly plastered ceiling surfaces including preparation of these surfaces complete all as specified and directed
M&L for applying two coats of oil bound destemper ( to match with the adjacent shade or tint) over a coat of chalk whitening on newly plastered wall surfaces including applying wall putty to make up depression etc and to the surface even & smooth including preparation of these surfaces complete all as specified and directed
M&L applying three coat of white wash on newly plastered surfaces on wall including preparation of surface, complete all as specified and directed
Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed
M & L Non-skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bedding layer in CM 1:6 and including roughening surfaces of old concrete/terrazzo finish floor by picking, sweeping clean and washing down with water to remove dust etc/ dismantling old tiles of any description, complete all as specified and directed
M & L Non-skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, on vertical surfaces as in skirting etc. set and jointed in neat cement slurry/paste and pointed in white or coloured cement to match over and including 10mm thick plaster in CM 1:4 including taking down old plastered/terrazzo finishes/old tiles etc; complete all as specified and directed
M & L for applying two coats of cement base paint over a coat of primer on newly plastered wall surfaces including preparation of these surfaces and matching the colour/tint with existing surfaces complete all as specified and directed
Non - skid Ceramic tiles 7 to8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but notexceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry andpointed in white or coloured cement to match over & including 15mm thick screed bedding layer in CM 1:6 and including roughening surfaces of old concrete/terrazzo finish floor by picking, sweeping clean and washing down with water to remove dust etc/ dismantling old tiles of any description, complete all as specified and directed
M & L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match screed bedding layer in CM 1:6 and including roughening surfaces of old concrete/terrazzo finish floor by picking, sweeping clean and washing down with water to remove dust etc/ dismantling old tiles of any description, complete all as specified and directed
M & L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in dado/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match layer in CM 1:4 and including roughening surfaces of old concrete/terrazzo finish floor by picking, sweeping clean and washing down with water to remove dust etc/ dismantling old tiles of any description, complete all as specified and directed
M & L glazed ceramic coloured tiles 7mm thick 350mmx 250mm/450mmx300 mm size in vertical surface/skirting set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade etc complete all as specified including 10mm thick plaster in CM 1:4 including dismantling of old tiles of any description etc complete all as specified and directed.
M & L in repair marble work (Udaipur green slabs) 18 to 20mm thick (table rubbed and polished) as in cooking platforms and like in cement mortar (1:4) in pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed. (Note :- Rate deemed to including for provision hole through marble & RCC slab for LPG gas pipe and rounding and polishing of edges of marble slab)
S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and 1.40 mm average width of aperture fixed with tinned tacks or galvanised wire staple, complete all as specified and directed
S&F in repairs GI wire cloth 0.36mm nominal dia of wire and 1.40 mm average width of aperture fixed with tinned tacks or galvanised wire staple, complete all as specified and directed
S&F for GI wire cloth 0.36 mm nomiral dia and wire and average width of aperture 1.40mm fixed with tinned tacks or galvanised wire staples complete all as specified and directed
S & F in repairs 300mm mild steel ordinary rat tail rod springs, including roller & roller plate and welding to steel frame complete all as specified and directed
Hacking out old broken glass (any thickness,size,quality or description ) from metal frame including punching or drilling out old glazing pins/springs clips complete all as specified and directed
S & F for 4 mm thick, sheet glass ordinary quality and glazing with rubber biding for aluminium window in square n. exc 0.5 sqm in each pane complete all as specified and directed
S & F 3.0mm thick sheet glass ordinary quality and glazing with oil putty in squares n. exc 0.50 Sqm in each pane complete all as specified and directed
S & F 4.0mm thick figured glass, pin head type and glazing with oil putty in squares n. exc 0.50 Sqm in each pane complete all as specified and directed
S&F in repairs PTMT tank nipple suitable for HDPE water tank (minimum weight 20 mm - 45 gms) complete all as specified and directed .
M&L for 25mm dia fancy type PVC coated on MS pipe coloured curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing PVC conduit pipes with accessories complete all as specified and directed
S&F in repairs PVC waste pipe with socket suitable for connection to Waste fittings of 32/40mm dia, and of length minimum 75 cm complete all as specified and directed
Taking up or down 15 mm bore galvanised iron tubing/PL-AL-PE pipes and connection including cleaning for refixing or removal complete all as specified and directed
Taking up or down 20 mm bore galvanised iron tubing /PE-AL-PE pipes and connection including cleaning for refixing or removal complete all as specified and directed
Taking down or up 25 mm bore galvanised iron tubing/ PE-AL-PE pipes and connection including cleaning for refixing or removal complete all as specified and directed
S & F 15mm bore GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, complete all as specified and directed
S & F 20mm bore GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, complete all as specified and directed
Refixing only old GI tubing 15 mm bore pipe and connections in new or old position as on walls ceiling floors etc complete all as specified and directed. (i) Cleaning of pipe is included in ser No 4 & 5 here in before (ii) Rates quoted by the contractor deemed to be included S & F new fittings as required Make: Tata/Prakash/Jindal ISI mark
Supply and fixing to walls/ chases/ ceiling or laying in floors polythene –aluminium- polythene (PE-AL-PE)composite pressure pipe 1620 (Out side dia-20mm) including all crimp type internal sealing , plastic-metal composite fittings (such as elbows, reducers, tees, couplers, short pieces connectors etc. complete all as specified and directed.
Supply and fixing to walls/ chases/ ceiling or laying in floors polythene –aluminium- polythene (PE-AL-PE)composite pressure pipe 2025 (Out side dia-25mm) including all crimp type internal sealing , plastic-metal composite fittings (such as elbows, reducers, tees, couplers, short pieces connectors etc. complete all as specified and directed.
Repair to concealed PVC (PE-AL-PE) pipes on walls including replacement of fittings (such as elbows, tees, reducers, couplers,short pieces, connectors, etc.), making joints leak proof and making good in CM 1:3 or PCC 1:2:4 (repair/replacement of tiles shall be measured & paid separately), complete all as specified and directed
S & F in repairs plastic-metal composite fittings (such as elbows, Tees, reducers, couplers, connectors/unions, etc) suitable for PE-AL-PE composite pressure pipes of 1620 (outside dia 20mm) etc complete all as specified and directed
S & F in repairs plastic-metal composite fittings (such as elbows, Tees, reducers, couplers, connectors/unions, etc) suitable for PE-AL-PE composite pressure pipes of 2025 (outside dia 25mm) complete all as specified and directed
S & F in repairs soap dish stainless steel , complete all as specified and directed
S & F in repairs 15mm bore brass bib taps , screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed
S & F in repairs 15mm bore pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed
S & F in repairs PVC lid (cover) for 500 to 1000 ltr capacity PVC water tanks with hinging & looking arrangement complete all as specified and directed.
S & F in repair 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed (weight 210 gms Minimum) complete all as specified and directed
S & F in repairs, brass chromium plated shower rose 125mm dia, with swivel joints & and arms, and fixing to pipe & union complete all as specified and directed
S & F in repairs 15mm bore, fancy type , chromium plated, angle valve, cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe complete all as specified and directed
S & F in repair PVC connection 15 mm size with PTMT nuts of length 450 mm of approved quality complete all as specified and directed
S & F in repair PVC valveless, symphonic action type flushing cistern, low level, with inlet ball valve, float and handle including brackets, PVC bend long type and connecting to flush pipe of any size and pattern complete all as specified and directed
S & F in repair vitreous china wash basin, white, flat back, size 550 x 400mm excluding taps, wastes but including brackets complete all as specified and directed
S & F in repairs sinks without drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall / RCC shelve and connecting union to pipe overall size 495mm x 420mm bowl complete all as specified and directed
S & F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x460mm bowl size 410mm x330mm x160mm complete all as specified and directed
S&F in repairs stainless steel plate racks of size 900mmx600mmx250mm and thickness of SS strip 1mm, fixed on wall etc complete all as specified and directed
S & F in repairs brass chromium plated tubular towel rail, 20mm dia, D type 60cm long between flanges complete all as specified and directed
S & F in repairs 15mm bore fancy type chromium plated brass bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed
S & F in repairs 15mm bore fancy type chromium plated stop valve cast copper alloy, with long shank & cup (concealed type) with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed
S & F in repairs brass chromium plated bottle traps for wash basins with inlet and out let screwed for pipe or connections including necessary packing, union and cap complete all as specified and directed.
S&F in repairs for three layer Rotational moulded polythylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed
S&F in repairs three layers rotational moulded polyethylene water storage tanks (cylindrical vertical top) hoisted and fixed in position 1000 litre capacity white in colour complete all as specified and directed.
S & F in repairs 32/40mm waste fittings, brass chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and flynuts, flange end bedded in red lead cement complete all as specified and directed
S & F in repairs 32/40mm waste fittings for stainless steel sink(sink coupling) , brass chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and flynuts, flange end bedded in red lead cement complete all as specified and directed
S & F in repairs CP grating (with or without waste hole), 125 mm size, fixed on floor/nahani traps etc complete all as specified and directed
S & F in repairs 110 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls with MS clamps etc complete all as specified and directed
Taking down rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed
S & F 110 mm bore, PVC (SWR) fittings such as bends of any radious, tee, shoe etc; fixed to PVC pipes, complete all as specified and directed
Dismantling / taking down 15 mm dia bib cock/ stop cock/angle cock of any pattern or any type and re-fixing the same after minor repairs such as replacement of washers etc or complete all as specified and directed (any major parts such as jumpers brass/ spindles/ caps etc required to be replaced, shall be measured as supply only and paid for accordingly)
Supply and fixing in repairs bib cock PTMT standard 15 mm dia of any colour, high pressure screwed for iron pipe & fixed ( male or female as required) complete all as specified and directed
Supply only Jumper brass with rubber or leather washer complete for 15 mm dia bib cock / stop cock brass complete all as specified and directed
S &F spindle brass for 15 mm dia CP Bib cock/ pillar cock/ concealed cock of any pattern complete all as specified and directed.
S & F capstan head / cap of CP bib tap / CP stop cock 15 mm size complete all as specified and directed.
S & F in repairs 20mm bore, gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed
S & F in repairs 25mm bore, gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed
S & F in repairs 32mm bore, gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed
S & F in repairs vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor and fixed complete all as specified and directed.
Fixing only in repair vitreous china wash down water closet pan (Pedestal pattern), including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. complete all as specified and directed
S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white, including connection to drain (or outgoing pipe) and to flushing pipe, ant-syphonage pipe, etc. complete all as specified and directed
Fixing only in repair vitreous china wash basin, of any description & size, excluding taps, wastes but including brackets complete all as specified and directed
S&F in repair flush pipe of polyethene of low or high density or PVC, 32mm dia, for low level cistern and fixed complete all as specified and directed.
Dismantling and disconnecting of existing CI soil vent pipe 100 mm bore fixed to wall,laid in trenches incl all fittings & accessories, complete all as specified and directed
Dismantling and disconnecting of existing CI soil vent pipe 75 mm bore fixed to wall,laid in trenches incl all fittings & accessories, complete all as specified and directed
S & F cast iron soil waste and vent pipe 75mm bore with or without ears fixed with chemical cement joints laid in trenches/floors or fixed in walls, complete all as specified and directed
S & F cast iron soil waste and vent pipe 100mm bore with or without ears fixed with chemical cement joints laid in trenches/floors or fixed in walls, complete all as specified and directed
Fixing only cast iron soil waste and vent pipe 100mm bore with or without ears fixed with chemical cement joints laid in trenches/floors or fixed in walls, complete all as specified and directed
Sealing only joints of cast iron pipes and fittings 75/100mm dia with chemical cement and making the joints leak proof complete all as specified and directed
S&F in repairs oval access doors to cast iron pipes of 100mm bore with rubber washer & bolts & nuts as required complete all as specified and directed
S&F in repairs oval access doors to cast iron pipes of 75mm bore with rubber washer & bolts & nuts as required complete all as specified and directed
S & F in repairs CI bends any radius, 100mm bore, diminishing pieces or tapers, etc with or without oval access doors, complete all as specified and directed
S & F in repairs CI bends any radius, 75mm bore, diminishing pieces or tapers, etc with or without oval access doors, complete all as specified and directed
S & F in repairs 100mm bore CI branch pieces, double (spigot or socketed type) with oval access doors complete all as specified and directed
Fixing only CI fittings 100mm bore of any type & description complete all as specified and directed
S & F in repairs 200 mm aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed
Supply and fixing in repair 125 mm long aluminium handles, fabricated type, anodised and fixed complete all as specified and directed.
S & F in repairs 100mm long PTMT ( Poly Tetra Methylene Terephthalate ) butt hinges best quality complete all as specified and directed.
S & F in repairs 150mm long PTMT ( Poly Tetra Methylene Terephthalate ) barrel tower bolt best quality, complete all as specified and directed.
S & F in repairs 125mm long PTMT ( Poly Tetra Methylene Terephthalate ) door handles, best quality, complete all as specified and directed.
S & F in repairs mild steel Butt Hinges, 100 mm size, medium weight, cold rolled fixed with screws/welding to wooded/steel frames or chowkats, complete all as specified and directed.
M&L welding in repairs with thickness of metal not exceeding 6mm and not exceeding 2.5 cm in length etc complete all as specified and directed.
M&L in repairs 2nd HW plain fillets, square, rectangular or triangular in section, wrought, secured with nails/brads or secured with screws, cross sectional area exc 6 sqcm and n. exc 13 sqcm, complete all as specified and directed.
M&L 2nd HW plain fillets, square, rectangular or triangular in section, wrought, secured with nails/brads or secured with screws, cross sectional area exc 3 sqcm and n. exc 6 sqcm, complete all as specified and directed.
S & F 200 mm aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.
Supply and fixing 150 mm long aluminium handles, fabricated type, anodised and fixed complete all as specified and directed.
Supply and fixing 125 mm long aluminium handles, cast type, anodised for cup boards and doors complete all as specified and directed.
S&F for MS tower bolt 200 mm long stove enamelled black with bright bolt complete all as specified and directed.
S&F for MS sliding door bolt 250 mm long stove enamelled black with bright bolt etc complete all as specified and directed.
S&F for MS pressed handles, oval type stove enamelled black 150 mm long complete all as specified and directed.
S&F in repair MS tower bolt 200 mm long stove enamelled black with bright bolt complete all as specified and directed.
S&F in repair MS pressed handles, oval type stove enamelled black 150 mm long complete all as specified and directed.
Supply and fixing in repair 150 mm long aluminium handles, fabricated type, anodised and fixed complete all as specified and directed.
S&F in repair PVC Knob/Handle (as per sample) for 10 ltr capacity PVC low level flushing cistern complete all as specified and directed.
S&F in repair PVC Syphon Kit (as per sample) for 10 ltr capacity PVC low level flushing cistern complete all as specified and directed.
S&F in repair complete Veta washer set (as per sample) for 10 ltr capacity PVC low level flushing cistern complete all as specified and directed.
Fixing only in repair low level flushing cistern any capacity after carrying out minor repairs such as stopping of leakage etc. complete all as specified and directed.
Renewing non skid /glazed ceramic tiles in patches in floor or walls, area n. exc 5 sqm including cutting out broken tiles carefully, preparing beds and laying or setting, jointing & pointing new tiles complete all as specified and directed. (new tiles shall be paid at supply only rate separately)
Cutting chases in brick walls girth exc 10 cm but not exc 20 cm wide for concealed water tubing etc and making good in CM 1:3 or PCC 1:2:4 as required complete all as specified and directed.
Dismantling carefully cement concrete in floor, etc around floor traps or any other concealed fittings, ( replacing floor traps/fittings if required and shall be paid at supplied only rate separately), sealing joints with solvent cement or other suitable materials and making joint leak proof and making good surfaces with PCC 1:2:4 or CM 1:3 (repair/replacement of tiles in floor shall be measured and paid separately), complete all as specified and directed.
M&L PCC 1:5:10 type D-2 using 40mm graded crushed/stone agg for foundations, filling & mass concrete, sub-base & sub-floors, etc. complete all as specified and directed.
M&L apply for a layer of hot blown bitumen of 85/25 penetration grade @ 1.7 kg/sqm incl cleaning the surface of roof or sunken etc complete all as specified and directed.
M&L 15mm thick cement plaster in CM 1:4 with water proofing compound (WPC to measurement & paid separately) and finishing top surface even & smoth as in roof slab /sunken floor , etc complete all as specified and directed.
Supply only floor trap 75/100 mm dia with grating including jointing to waste pipe complete all as specified and directed.
Supply only non skid ceramic coloured tiles 400 x400 x7mm thick
Supply only non skid ceramic coloured tiles 300 x300 x7mm thick
Supply only glazed ceramic coloured tiles 300 x200 x7mm thick
M&L PCC 1:4:8 type D-2 using 40mm graded crushed/stone agg for foundations, filling & mass concrete, sub-base & sub-floors, etc. complete all as specified and directed.
Taking down chowkhats or frame n exc 1.50 Sqm each with shutters (W/out taking off shutters from the frames) complete all as specified and directed.
Taking down chowkhats or frame exc 1.50 Sqm but n exc 4 Sqm each with shutters (W/out taking off shutters from the frames) complete all as specified and directed.
Taking down shutters of any description exc 1 Sqm & nexc 2 Sqm each complete all as specified and directed.
S&F for pressed steel frames of size 125 X 60 mm with one or more rebates including necessary fixing lugs hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the plaster of wall in CM 1:6 complete all as specified and directed.
S&F for pressed steel frames of size 105 X 60 mm with one or more rebates including necessary fixing lugs hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the plaster of wall in CM 1:6 complete all as specified and directed.
S&F for pressed steel frames of size 75 X 60 mm with one or more rebates including necessary fixing lugs hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the plaster of wall in CM 1:6. as in cupboard frames complete all as specified and directed.
S&F 2nd class HW 35mm thick factory made panelled shutters with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 (Pt-I)kiln seasoned and chemically pressure treated complete all as specified and directed.
M & L for PCC 1:3:6 type C1 (20mm graded stone aggregates) as in filling back of pressed steel door frames/chowkats and for fixing hold fasts, etc., complete all as specified and directed.
S&F 2nd class HW 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass, gauze, etc.; sizes of members of shutters as specified in SSR Part I Section 8, Clause 8.24 (a) complete all as specified and directed.
M & L 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
S & F for factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube fixed in opening complete as per specifications & drawing complete all as specified and directed.
S & F for 30 mm thick factory made solid panel PVC door shutter confirming of frame made out of MS tube of top & bottom rails MS frames shall be covered with heat moulded PVC `C' channel ohaving a PVC sheets strip of 20mm width stuck inside with solvent cement for styles and colour PVC sheet for top rail, lock rail and vottom rail on either side and as gap insert for top rail & bottom rail, Panelling of plain cover PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement as per specification complete all as specified and directed.
M&L for preparation of new or previously untreated wood and wood based surfaces of any description exc 10 CM width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for preparation of new steel and iron surfaces of any description exc 10 CM width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L Securing window/vent glass of any description in existing metal/wood frame fixed with putty/ beads including removing loose or decayed putty/beads, and painting/oiling puttied surface to match existing work (New length of frame reputtied shall be measured)
M&L for stopping of leakage/Seepage in CI/PVC/GI pipes by using M-Seal complete all as specified and directed.
S&F in repairs ( to be fixed with screws & welding as required) continuous (piano) hinges, mild steel, bright finish or electro galvanised, width of flap (when open) 30mm complete all as specified and directed.
S&F in repairs 18/19mm thick pre-laminated particle board, interior grade, fixed with screws to timber frame work and steel frame work as in kitchen cupboards, drawers, shutters, shelves etc including teak wood lipping, 6mm thick on edges fixed with nails etc, complete all as specified and directed.
S&F 100mm Butt hinges, extruded aluminium alloy with galvanished mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.
S&F for Al hasp and staple 100 mm size complete all as specified and directed.
M & L for MS work as in framed brackets of angles as sink brackets and coller stand complete all as specified and directed.
Dismantling boarding any description fixed in any position with rails incl fillets complete all as specified and directed.
S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white, including connection to drain (or outgoing pipe) and to flushing pipe, ant-syphonage pipe, etc. complete all as specified and directed.
Fixing only in repairs vitreous china wash down water closet pan (pedestal pattern), white, including connection to drain (or outgoing pipe) and to flushing pipe, ant-syphonage pipe, etc. complete all as specified and directed.
S & F 15mm bore, brass CP wall mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.
S & F in repairs 15mm bore, brass CP central hole basin mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.
S&F in repairs cast brass connection legs for CP brass central hole basin mixer with washer etc complete all as specified and directed.
S&F MS 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
S&F butt hinges 100mm medium weight cold rolled mild steel and fixed complete all as specified and directed.
S&F for MS pressed handles, oval type stove enamelled black 125 mm long complete all as specified and directed.
S&F for Aluminium anodised barrel tower bolt 150 mm long of extruded section complete all as specified and directed.
S&F for steel windows/ventilators with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded, including steel window/ventilators complete all as specified and directed.
S&F for steel windows/ventilators with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with out glazing bars, , including steel window/ventilators complete all as specified and directed.
Supply and fixing steel windows or ventilators fixed type with glazing bars , including steel window/ventilators complete all as specified and as directed .
Supply and fixing mild steel framed work such as grills,guard bars, gate, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe290,Gde-E-165 complete all as specified and as directed
S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flap when open is 30 mm complete all as specified and directed.
Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each and refixing in the same opening including easing and adjusting including renewal of unserviceable screws etc. complete all as specified and directed.
Taking down shutters of any description not exceeding 1.00 sqm each and refixing in the same opening including easing and adjusting including renewal of unserviceable screws etc. complete all as specified and directed.
Re-securing or easing & adjusting, without taking down shutter of any description exc 1.00 sqm but n exc 2.00 sqm each complete all as specified and directed.
Re-securing or easing & adjusting, without taking down shutter of any description not exc 1.00 sqm each complete all as specified and directed.
Demolition of cement concrete of any description & in any position not otherwise specifically provided for, complete all as specified and directed.
M&L PCC 1:5:10 type E-2 using 40mm graded crushed/stone agg for foundations, filling & mass concrete, sub-base & sub-floors, filling of sunken floors etc. complete all as specified and directed.
Water proofing treatment to sunken slab and adjoining vertical surfaces as specified under:- (a) M&L rendering 10 mm thick in cement plaster (1:3) using coarse sand mixed with integral water proofing compound as per manufacturer's instruction trowel even and smooth with steel trowel on sunken surfaces (Note : WPC shall be measured and paid separately) (b) Applying first coat of chemical pidifin 2K(Dr Fixit) on cleared RCC surfaces @ 0.86 Kg/Sqm (Minimum) as recommended by manufacturer. (c) Provide a layer glass fibre mesh of size 2.25mm x2.25mm (45 GSM) over first coat of chemical Pidifin 2K as per manufacturers recommendation. (d) Applying second coat of chemical Pidifin 2K (Dr Fixit) @ 0.86 Kg/Sqm (minimum) layer glass fibre mesh of size 2.25mm x 2.25mm (45 GSM) as recommended by manufacturers.
Supply only Integral water proofing compound complete all as specified and directed. Make Dr. Fixit or any other equivalent make from list of make attached in tender documents as approved by GE.
S & F in repair Corner glass shelf (25cm/30cm ) with CP brass bracket & railing etc; complete all as specified and directed.
M&L Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.
Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc for exc 250 n. exc 500 complete all as specified and directed.
Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc for exc 500 n. exc 1000 complete all as specified and directed.
Disconnecting exc 500 and not exc. tanks 1000 ltrs capacity, setting aside (or lowering if reqd) for repairs, cleaning etc and hoisting if reqd reconnecting and re-fixing in position complete all as specified and directed.
Disconnecting exc 250 and not exc. tanks 500 ltrs capacity, setting aside (or lowering if reqd) for repairs, cleaning etc and hoisting if reqd reconnecting and re-fixing in position complete all as specified and directed.
Note:- Net contract sum shall be calculated after deduction of Sch of credit.
M/s Manav Builders
M/S KARTIK BUILDERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .