COMPREHENSIVE MAINT FOR BR PORTION,MISC SERVICES INCL ALLIED WKS AND SMART PERIODICAL WK FOR CERTAIN HIGH RISED BLDGS OF OTM AND MAINTENANCE COMMAND COMMUNICATION FLIGHTS, SONEGAON, 22 PROVOST AND SECURITY, AKSTA AKSC AREA AT VAYUSENA NAGAR NAGPUR

Amount

Material and labour for prepartion of old plastered/unplastered surface of walls incl cornices, pilasters etc & applying one coat of white wash on walls complete all as specified and as directed.

All as per item No 1 above but two coats of white wash on walls

All as per item No 1 above but one coat of white wash on ceiling

Material and labour preparation of old distempered sufaces of walls by washing, rubbing down and stopping of distempered surfaces incl repair of damaged portion by applying wall care putty to achieved smooth surface and applying one coat of oil bound distemper with roller on walls complete all as specified and as directed.

All as per item No 4 above but two coats of oil bound distemper

All as per item No 4 above but one coat of oil bound distemper with roller on ceiling

Material and labour for complete removal of existing treatment of wall surfaces and applying 1mm thick wall care putty and making the surface even & smooth by rubbing and applying one coat of alkali resistant primer and applying distempering two or more coats with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification using airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed at any height upto 15 mtr incuding necessary scaffolding. Note : Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.

Material and labour for peparation of old painted wooden surfaes of any dscription over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for peparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for prepartion of old plastered/unplastered surface of walls incl washing, rubbing down and stopping of painted surfaces etc & applying one coat of cement based paint complete including filling of hole, cracks etc with lime putty or plaster of paris all as specified and as directed. Note :- Shade and pattern of the colour to be approved by GE.

Material and labour for complete removal of existing treatment on wall surfaces by scrapping with mechanical sander (having mechanical vacuum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etcc & applying two coats of cement based paint complete including filling of hole, cracks with lime putty or plaster of paris all as specified and as directed. Note :- Shade and pattern of the colour to be approved by GE.

Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc by skilled labour complete all as specified and directed at any height upto 15 mtr incuding necessary scaffolding.

Material and labour for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 litre/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm complete all as specified and directed at any height upto 15 mtr incuding necessary scaffolding over complete removal surfaces. Note :- (i) Primer and emulsion application to be carried out through air less spray machine (Only mechanical application allowed except in paint application on bands/chajja/building edges/borders/projections where contrasting color as specified and directed is to be applied). (ii) Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. proper masking to be carried out before primer and paint application). NOTE 1 : Provn of all safety instruments/scafolding/material & sefty of men, insurance etc all are contractor's responsibility

Material and labour for preparation of old decorated surfaces in walls, soffits, facia roof etc and applying one coat of weather proof premium acrylic based emulsion paint (100% acrylic) as per manufacturers instructions etc complete all as specified and directed. Note :- Shade and pattern of the colour to be approved by GE.

Taking down cement or cement lime plaster, any description on brick or stone/PCC block masonry walls, etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

Material and labour for rendering 15 mm thick in CM 1:6 over brick /stone wall/block wall/concrete surfaces finished even and smooth without using extra cement all as specified and as directed.

Material and labour for rendering 15 mm thick on fair face of brick work or concrete surfaces of wall in CM (1:4) finished even and smooth without using extra cement but using water proofing compound @3% by wt of cement complete all as specified and as directed. Note : - WPC shall be measured and paid separately

Supply only water proofing compound

Material and labour for rendering 5 mm thick in CM 1:3 on concete surfaces, finished even & smooth with out extra ement in ceiling complete all as specified and as directed.

Material and labour for preparation of new plastered surfaces of walls and applying 1mm thick wall care putty in two layers of opposite direction for making the surface even & smooth and applying two coats of oil bound distemper over a coat of alkali resistant primer of required shade and colour complete, as per manufacturer's specification using airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed at any height upto 15 mtr incuding necessary scaffolding.

Material and labour for preparation of new plastered surfaces of wall and applying 3 coats of white wash complete all as specified and as directed.

Material and labour for preparation of new plastered surfaces of ceiling and applying 3 coats of white wash complete all as specified and as directed.

Material and labour for preparing newly plastered surfaces of ceilings and applying two coats of distemper oil emultion over one coat of primer paint roller complete all as specified and directed.

Material and labour for preparation of new plastered wall surfaces and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm complete all as specified and directed at any height upto 15 mtr incuding necessary scaffolding if required at site. Note :- (i) Primer and emulsion application to be carried out through air less spray machine (Only mechanical application allowed except in paint application on bands/chajja/building edges/borders/projections where contrasting color as specified and directed is to be applied). (ii) Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. Proper masking to be carried out before primer and paint application). Note :- Shade and pattern of the colour to be approved by GE.

NOTES FOR ITEM NO. 7, 13, 20 and 24:- (a) The work pertaining to smart periodical services shall be executed by authorized applicator through manufacturer of which the materials .i.e. Paint, Distemper etc. is proposed to be used by the contractor and approved by GE. (b) Cost of scaffolding etc of building shall deemed be included in the quoted rate. same before applying primer and finishing coats. (c) The equipments to be used in the work shall be certified by the manufacturer with whom the MOU been entered into.

Material and labour for preparation of new plastered surfaces of wall and applying 2 coats of cement base paint complete all as specified and as directed at any height including necessary scaffolding if required at site all as specified and as directed.

Material and labour for preparation of old surfaces by rubbing/ scrapping including removing loose particle/ dust and applying one coat of floor guard of premium acrylic emulsion paint of aproved shade to cleaned surfaces of paver tile, blocks, kerb stone etc complete all as specified and as directed.

Material and labour for cleaning the existing surfaces with wire brushes ,cut the cracks In V shape and filling with berger HS crackfill paste,sika,choksey or equivalent and finishing the surface to match with existing finish all as specified and as directed.

Material and labour for silicon gel filling with gun to fill gaps between aluminium door frames/similar articles to arrest water coming inside from cills/jams and similar joints in other places complete all as specified and as directed. Note:- make of silicon shall be approved before use by GE/EIC.

Material and labour for old painted surface of stone work of any description not specifically mentioned otherwise over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed.

Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each and removal from site all as specified and directed.

Taking down chowkats or frame with shutter (without taking out shutter from the frame) exceeding 1.50 sqm but not exceeding 4.00 sqm each and removal from site all as specified and directed.

Material and labour for aluminium framed doors/windows/ventilators sections any pattern, fixed/side hung/silding (two or three track) using powder coated alluminium sections, of approved make with or with out sash bars suitable for glazing/gauzing including necessary jointed cleats, etc complete all as specified and as directed. Note-: Glazing/ gauzing shall be measured and paid separatly)

Supply and fixing Sheet glass, ordinary quality in square not exc 0.50 Sqm each pane, 4 mm thick fixed to aluminium section complete

Supply and fixing stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc.

Supply and fixing 12mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required all as specifed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.

Supply and fixing of Steel work in tubular trusses, post, purlin, rafter etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240

Dismantling asbestos cement, galvalume, fiber sheet (Plain, corrugated , semicorrugated, etc.) sheet in roof covering all as specified and directed.

Supply and fixing Pre painted GalvaIume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws etc complete all as specified and directed.

Supply and fixing Pre painted GalvaIume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in ridge/valley gutter of roof covering fixed with self tapping screws etc complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and demolished meterial to be removed out side of MD land.

Dismantling floor, hearth or wall tiling including cement mortar bedding and disposal of rubbish off the premises all as specified and as directed.

Material and labour for providing PCC 1:2:4, type B1 (using 20 mm graded aggregate), 40 mm thick, finishing cement concrete surfaces even and smooth using extra cement all as specified and as directed.

Material and labour for providing screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 all as specified and as directed.

Material and labour for polished Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors

Material and labour for 100 thick cement concrete type D2, 1:4:8 (40 mm graded aggr) as in sub base.

Material and labour for factory made Machine pressed rubble moulded precast conctete interlocking paver block any shape and size with grey cement and pigments confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade over and including 40 mm thick stone dust cousioning complte all as specified and directed.

Taking down or up 15 mm bore galvanised iron tubing and connection including cleaning for refixing or removal complte all as specified and directed.

All as per item No 48 above but 20 mm bore

Supply and fixing GI tubing medium grade with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complte all as specified and directed.

All as per item No 50 above but 20 mm bore

Supply and fixing in repair chromium plated fancy type stop cock/angular cock (Weight not less than 575 gms), cast copper allay, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes 15mm bore complete all as specified and directed.

Supply and fixingin repair 15 mm bore chromium plated fancy type bib taps, (Weight not less than 575 gms), cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

Supply and fixingin repair PVC connection 15 mm size with PTMT nuts of length 450 mm of approved quality complete all as specified and directed.

Supply and fixing in repair PVC low level cistern of 10 lit capacity inclusive of brackets and PVC bend long type and connectin to flush pipe of any size and pattern with inlet ball valve float and handle complete all as specified and directed.

Supply and fixing in repair Vitreous China wash basin, white, flat back of size 550 x 400 mm including CI brackets, waste coupling ,brass CP pillar tap 15mm screwed down high pressure , PTMT bottle trap, pvc supply pipe 15mm from stop valve 450mm etc complete all as specified and directed.

Supply and fixing in repairs of 15mm bore pillar taps, fancy type (long body), (Weight not less than 622 gms), cast copper alloy with capstan heads, Decorative type chromium plated screwed down, high pressure screwed for iron pipe complete all as specified and directed.

M/s Prakash R. Verma (BID ID -3153589)

Dua Construction (BID ID -3147818)