Installation of New Street Light Poles to address dark patches at CSIR-IICT, Hyderabad (Phase-II).

Supplying and making indoor end termination with brass compression gland and aluminium lugs for following size of PVCinsulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 X 10 sq. mm (25mm)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Upto 35 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. Upto 35 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Upto 35 sq. mm

Providing, laying and fixing following dia G.I. pipe (medium class) in ground including road cutting complete with G.I. fittings including trenching (75 cm deep)and re-filling and make same like previous with cement work etc as required and as directed by engineer incharge. 100 mm dia

Supplying and laying 6 SWG/8 SWG G.I. wire at 0.50 Meter below ground level for conductor earth electrode, including connection/ termination with GI thimble etc.as required

Supply of 6 mtr high hot galvanised octagonal pole, continously tapered (bolt fixing type) in single section made out of 3mm thick sheet suitable for bracket having top dia 70-75mm and bottom dia 130-150 mm, base plate size 200X200X12 to 220X220X16 mm with door and locking arrangement complete with suitable Single arm sword bracket for 06 mtr octagonal with SS balls and necesary connectors , MCB or any other electrical accessories along with founadation bolts(M24X750) and with all necessary accessories. Make : Bajaj/Philips/Crompton/Valmont. Please refer Annexure - I for detailed technical Specification.

Installation, testing, and commissioning of 6-meter high hot-dip galvanized octagonal pole of continuously tapered, bolt-fixing type in single section, fabricated out of 3 mm thick steel sheet, suitable for mounting of single-arm decorative sword type bracket, having top diameter of 70–75 mm and bottom diameter of 130–150 mm, complete with base plate of size 200 × 200 × 12 mm to 220 × 220 × 16 mm, inspection door with locking arrangement, necessary connectors, SP MCB, terminal arrangements, internal wiring from connector to Lamp (3Cx1.5 sq mm copper cable ), and all other required electrical accessories, including erection using foundation bolts of size M24 × 750 mm and execution of required RCC civil foundation works complete in all respects as per supplier design .The scope includes erection, alignment, cable connection, earthing, testing, and commissioning of the complete street lighting system as per approved specifications and Annexure–I. (The octagonal poles, bracket arms, and foundation bolts shall be supplied by the Department for 20 Nos of Poles), and the contractor shall carry out only installation and commissioning works complete in all respects as directed by the Engineer incharge.

Supply and fixing of out door Street Light LED Luminaire of 70 Watt on exsting pole ( 6Mtrs) with all required accessories as required complete and as directed by the engineer incharge. Make: Philips, Crompton

Dismantling of Existing Street Light Cement poles : Dismantiling and removing of Old Cement Poles along the road side with necessary machinery and Labourto safely extract the poles from the ground,. The work includes all related chipping/civil works removing of old poles from ground and transporting the dismantled material from the site to Departmental stores and Disposal of waste material as per the site conditions and directed by the engineer incharge