REPAIR TO BARBED WIRE CHAIN LINK FENCING CONCERTINA COIL SECURITY WALL PATH HARDSTANDING SEWAGE SYSTEM AND DRAINS IN MD ACCN AREA IN THE AREA OF AGE BR II UNDER GE MIS MHOW

Amount

Dismantling fencing wire mesh, any type and size complete all as specified and directed

Dismantling posts or struts (wood, steel or R.C.C.) embedded in concreteany section, including taking out embedded portion and making good disturbed ground complete all as specified and as directed.

Dismantling of wrought iron or mild steel work of any description not other wise provided for complete all as specified and as directed.

S&F in repairs Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts,including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. Complete all as specified and as directed (each line wire to be measured)

S&F in repairs galvanised steel punched type concertina coil 610 mm dia (dia of coil when unstretched) and fix to angle iron with 3.15 mm dia GI wire complete all as specified and directed

Excavating post holes or similar holes, each not exceeding 0.5 Cum, getting out in Soft/ Loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n.exc 50m & making good surface complete all as specified and as directed.

M&L for PCC 1:2:4 type B2 using 40 mm graded stone aggregate as in foundation ,post, etc complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc., including provision of binding wire. complete all as specified and as directed.

Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and directed.

S&F 10 mm dia MS TMT bar for fixing of chain link fencing with post complete all as specified and directed.

S&F 11 to 15mm dia of neck MS Screw bolts(Machine made ) with hexagonal or square heads at one end and screwed at other end or both end, and screwed end to be fitted with washer and one hexagonal or square n.exc 20 cm long etc complete all as specified and directed.

S&F mild steel framed work as in doors or gates of angle iron, door frame or other section with gusset plate, rails, braces etc complete, drilled for fixing of steel sheeting or other covering etc, to prepared for hanging or sliding with including either hooks and hinges also fastening grills, grating, hold fast of doors and windows chowkat etc, with ends of bars shouldered and or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanksand fixing and similar work confirming to fe 290 Gde E-165 including of dismantlinf of Timber structure if any complete all as specified and as directed.

S&F Green/Blue powder coated 4mm dia mild steel wire mesh fence system perimeter coated welded wire mesh fence steel panel of area n.exc 10 Sqm and mesh size as directed by Engr-in-Charge complete all as specified and as directed.

S&F powder coated mild stee post for 3D fence including all clamps, bolts, fittings ,fixtures and size of post as decided by Engr-in-Charge complete all as specified and directed.

Demolition of cement concrete in ground floor and paving not exceeding 15cm thick ( below or above ground level ) complete including removal of debries out side MD land complete all as specified and as directed .

M&L for PCC (1:3:6) type C-2 using 40 mm graded crushed stone aggregate as in sub base, levelling course, etc complete all as specified and as directed.

M&L for PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base of floor, etc complete all as specified and directed

M&L for 75mm thick cement concrete 1:3:6 type C1, with using 20mm graded stone aggregate as in floor/ plinth protection finish the surface even and smooth with using extra cement including filling the expansion joints with bitumen filler / filler boards and necessary form work etc complete all as specified and as directed.

Demolition stone slabs and tiles of any description or thickness in floors complete all as specified and as directed.

M&L for chequered cement concrete tiles (glossy finished) with grey cement and pigment of size 25cmX25cmX25mm thick ,set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for chequered cement concrete tiles (glossy finished) with grey cement and pigment of size 40cmX40cmX40mm thick ,set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for machine cut kota stone slab in flooring 20-25mm thick laid over and including 15mm thick screed bed in CM 1:6 & cement mixed with pigment to match the shade of slab including rubbing and laid over and including and polishing complete all as specified and as directed.

M&L for 60mm thick precast concrete interlocking paver block (Glossy finished) of M-35 Gde of approved shape, size and colour conferming to IS 15658-2006 and including joints filled with sand over and including 50mm thick stone dust complete all as specified and as directed.

M&L for 80mm thick precast concrete interlocking paver block (glossy finished) of M-40 Gde of approved shape, size and colour conferming to IS 15658-2006 and including joints filled with sand over and including 50mm thick stone dust complete all as specified and as directed.

Dismantling of Asbestos cement (corruga ted, semicorrugated, etc.) sheets in roof coverings etc complete all as specified and as directed.

S&F 0.50mm thick (including coated thickness) pre-colour pre- profiled (Galvalume/zinkalume) corrugated sheets of required colour and design having tensile strength of 550 Mpa as in roof sheeting/sunshade/ wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap laid to slope all as per manufacturer / profile maker instruction complete all as specified and as directed.

S&F 0.50mm thick (including coated thickness) pre-painted pre- profiled (Galvalume/zinkalume) plain sheets of required colour and design having tensile strength of 550 Mpa steel sheet as in roof sheeting/sunshade/ wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap laid to slope all as per manufacturer / profile maker instruction complete all as specified and as directed.

Dismantling of timber scantlings as in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section in un-framed work complete all as specified and directed.

S&F mild steel Hollow Section work in tubular trussles, purlins, rafter, tubler column, where connected common rafter and running rails fixed with angle cleat or other connection plates including special shaped washer etc, complete using ERW or induction butt welded tubes conforming IS-4963,1993 and IS-1161-1979 grade ST-240 complete all as specified and as directed.

S&F mild steel Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming IS-1161-1979 grade ST-240 complete all as specified and as directed.

S&F Mild steel plates (Plain or chequered) as in shoe plate, base plate and gusset plates forming holes for roof frame work, trusses, rafters etc of grade Fe 410 WA. complete all as specified and as directed

S&F mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed

M&L for preparation of newly steel surfaces, of any description, over 10 cm width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and as directed

Desilting and cleaning of open drains of any section manually including desilting solid/semi solid materials of any type vegetation growth and removal of sludge upto a distance exc 5.00 KM from the edges of drains etc complete all as specified and directed by Engineer-in-Charge.

Demolition of Brickwork or stone/ boulder masonry, built in Cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles including removing debris outside MD land complete all as specified and as directed

M&L for brick work with using modular size flyash bricks straight or curved on plan exc 6 m mean radius built in CM (1:6) complete all as specified and as directed

M&L for half brickwork with using modular size flyash bricks straight or curved on plan any radius in half bricks thick wall built in cm (1:4) complete all as specified and as directed

M&L for stone walling of squared rubble,regular coursed,well bonded,bedded and solidly hearted, built in CM 1:4 complete all as specified and as directed.

M&L for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in coping, cills ,string courses, apex stone, bed plates, kerbs, bands, lintels n.exc 1.5m length etc including necessary form work, weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar 1:4 on concrete surface finished with even and smooth without using extra cement complete all as specified and directed.

M&L for applying two coats of white wash on walls including preparation of newly plastered surfaces of ceiling of any description complete all as specified and as directed.

M&L for cement concrete in surface channels and drains Type B2 1:2:4 (40 mm graded aggregate) complete all as specified and as directed.

Extra for forming fair finished drain or channel of 30cm inner girth in cement concrete using extra cement including forms moulds etc with using modular size flyash bricks complete all as specified and as directed.

S&F factory made steel fibre reinforced (SFRC) manholes covers with frames incl necessary hold fast/hooks (medium duty) of 560 mm dia or rectangular of equivalent area including fixing with CM 1:4 and not less than 50mm thickness complete all as specified and directed.

All as per item No 44.00 above but without frame

Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and as directed.

M&L for rendering 15 mm thick wall plaster in cement mortar 1:3 mixed with water proofing compound complete all as specified and directed.

Supply only Integral water proofing compound complete all as specified and as directed.

M&L for applying two coats of Dr Fixit pidecrete URP in sunken floor portion of toilets & bathroom, chajja, staircase. etc by using URP + cement in the proportion of (1:1.5) and making pedicrete solution and applying by brush. Etc all as specified and as directed by Engineer-in-charge

M&L applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2kg/sqm incl cleaning surface complete all as specified and as directed.

M&L for PCC 1:5:10, type E-2 using 40mm graded stone aggregate as in filling of sunken floors etc.complete all as specified and directed.

Dismentaling of floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish of the premisescomplete all as specified and directed.

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in CM 1:6 complete all as approved and directed

M&L for glazed coloured joint free ceramic tiles ,area of each tile exceeding 0.09 sqm but not exceeding 0.16 sqm on vertical surfaces of wall such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10mm thick rendering on stone masonry surfaces or surfaces other than fair faces of brick work in CM 1:4 complete all as specified and directed.

Taking down cement plaster on brick or stone or concrete surfaces of wall/ceiling etc , including raking out joints , hacking for key, scrubbing down with water etc.complete all as specified and directed.

M&L for stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the marble stone 10mm nominal size complete all as specified and directed. Note : (i) Paymentfor providing grooves shall be made separately (ii) Rate includes for any colour of marble stone and cement.

M&L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete all as specified and directed by the Engineer-in-Charge.

M&L for Rough cast plaster complete all as specified and as directed by Engr-in-Charge

M&L for Sand faced plaster complete all as specified and directed.

Demolation of precast RCC jallies including raming of any description any in any position set in cement mortar complete all as specified and directed.

M&L for precast cement concrete (1:2:4) louvers and jallies 25mm thick (measured solid) including all mouldings but excluding frame & set in CM 1:4 complete all as specified and directed.

M&L for preparation of new plastered wall surfaces and applying two coats of cement base paint on wall/RCC Jallies complete all as specified and directed.

M&L for precast reinforced cement concrete slab type B1, 1:2:4 ( 20mm graded stone aggregate ) as in landing, drain cover slab ( for manholes etc ) , chajjas , drain cover and shelves and similar articles with plain faces .(Reinforcement shall be measured & paid separatel.) complete all as specified and directed.

Checking and repair to leakages and re-fixing after cleaning of bib taps/ mixer taps/ stop cocks/angle valves / flushing cisterns/ including removal of air lock/blockage of water in GI tubing, cleaning the pipe or fittings all connected plumbing works etc complete all as spd & directed. Note :- The cost of minor items like nails/hooks/nut bolts/screws/hexa blades/washers/plugs/ grease, safeda, thread (soot), M-seal, flush handles, sensor cell, check nuts, adhesive, white cement etc shall be deemed to be inclusive in the quoted rates only.

S&F in repair brass spindle (face part) heavy duty for CP pillar cock,stop cock,Bib cock, wall mixer,basin mixer,conceled stop cock etc 15mm bore complete all as specified and directed.

M&L for cleaning to blockage of ‘S’ traps / 'P’ traps / Nahani Trap / floor Trap including cleaning of WC/EWC/WHB/Sink etc and removal of all blockage by manually or mechanically and making fully functional at any location & at any floor and removing sludge/mud or any other materials beyond the premises of MoD land etc complete all as directed.

M&L for cleaning to blockage of Gully trap or other waste materials etc and removal of all blockage by manually or mechanically and making fully functional at any location & at any floor and removing sludge/mud or any other materials beyond the premises of MoD land etc complete all as directed

Cleaning of Sewage CI/PVC pipe line upto 150mm bore fixed in any position by means of rodding of any other sources and clean out the sluge /liquid mud or any other obstruction material including working in foul position and depositing of sludge/silt/liquid mud beyond the premises of MOD land etc complete all as directed. Note: Items includes working in shaft portion upto 6 th story building nesecarry arrengment included in quoted cost.

Cleaning of Sewage pipe line (RCC/SGSW) of Upto 300mm bore by means of sewage cleaning jet machine / compressors/Drain jetters Pumps and clean out the sluge /liquid mud or any other obstruction material to any depth including nesesarry rodding, working in foul position and depositing of sludge/silt/liquid mud beyond the premises of MOD land etc complete with all specified pressure rating and complete all as directed by Enge-in-charge. Note :- All other arrengment of electricity, water, etc included in quoted cost.

Cleaning of manholes upto 1.50m depth from bottom of manholes surface including working in foul position and removing of sludge/ silt/liquid mud or any other obstructions materials etc from manholes and depositing beyond the premises of MOD land complete all as specified and as directed

Cleaning of manholes exc 1.50 m but not exc 3.00 m depth from bottom of manholes surface including working in foul position and removing of sludge/ silt/liquid mud or any other obstructions materials etc from manholes and depositing beyond the premises of MOD land complete all as specified and as directed

Cleaning of manholes exc 3.00 m but not exc 4.50 m depth from bottom of manholes surface including working in foul position and removing of sludge/ silt/liquid mud or any other obstructions materials etc from manholes and depositing beyond the premises of MOD land complete all as specified and as directed

De-watering including slugging mud or other waste materials etc from septic tanks by means of pumping device or mechanical including draining out & removal of sludge out of MOD land by means of covered tank complete all as directed Note: - The unit rates quoted by the contractor shall also deemed to be included in the operation of moveable to sewage pump for dewatering of septic tank & sokage wells where ever is required. Nothing extra admissible on this account.

De-watering including slugging mud or other waste materials etc from Soak well and also taking out brick bats / stone aggregates by means of pumping device / mechanically / Manually including draining out & removal of sludge out of MOD land by means of covered tank complete all as specified and as directed Note: - The unit rates quoted by the contractor shall also deemed to be included in the operation of moveable to sewage pump for dewatering of septic tank & sokage wells where ever is required. Nothing extra admissible on this account.

Excavation in trenches n.exc 1.50 m wide and n.exc 1.50 m in depth for foundation or shafts, wells, cesspits, manholes, pier holes, cable laying, sewage/water lines etc complete and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches n.exe 1.5m wide and exc 1.5 m but not exc 3.0 mtr in depth for foundation or shafts, wells, cesspits, manholes, pier holes, cable laying, sewage/water lines etc complete and getting out in soft/loose soil complete all as specified and directed.

Returning filling in including spreading leveling, watering, and well, ramming in layer nexc 25 cm in layers complete all as specified.

Removing excavated material to a distance exc. 50 m and depositing where directed at a level n. exc 1.50 m above the starting point complete all as specified and directed.

Demolition and breaking of drain pipes up to 200 mm dia (Salt galzed ware, AC or Reinforced concrete set in cement mortar etc complete all as specified and directed.

S&F reinforced cement concrete drain pipes of 150 mm dia bore class NP-2, laid and jointed complete with collars etc complete all as specified and as directed.

S&F reinforced cement concrete drain pipes of 200 mm dia bore class NP-2, laid and jointed complete with collars etc complete all as specified and as directed.

M&L for concrete bed to drain pipes 150 mm bore including packing under and hunching against the sides of pipe, after they are laid and tested in cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregagte) etc complete all as specified and as directed

M&L for concrete bed to drain pipes 200 mm bore including packing under and hunching against the sides of pipe, after they are laid and tested in cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregagte) etc complete all as specified and as directed

M&L for Cutting in to existing man holes for connecting new drains for internal dia of pipe 150 mm, making good to pipe and rendering , cutting out existing benching for and forming branch channel (1/2 round or 3/4 section ) in cement concrete 1 : 2 :4 type 'B1' smooth finished and reforming benching as required complete. All as directed and specified.

All as per item No 84.00 above but 200 mm dia pipe complete all as specified and directed.

S&F in repairs Viterous China water closet squatting pan, 'Orrisa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete including connectoin to trap, and to flushing pipe, anti syphonage pipe etc. including trap set in and including concrete and making good to floor. complete all as specified and directed.

S&F in repairs Vitreous china wash down water closet pan (pedestal pattern) excluding flushing cistern and flush pipe, including fixing of water closet complete with plastic water closet seat black/white closed pattern witrh flat bottom and cover and mild steel chromium plated or aluminised hinging device.

S&F in repairs 10 Ltrs capacity PVC low level flushing cistern complete with syphone handle lever PVC bend including connecting to WC and fixing on walls with bracket all as specified.

S&F in repairs vitreous china wash basin under counter ovel type size 560x450x175mm under granite slab with all fitting and fixture complete all as specified and as directed and fixed in repairs.

S&F 15mm bore brass CP basin mixer for mixing hot and cold water fixed as per manufacture's mannual, with long shunk and cup washers, screwed both ends for iron pipes or for unions complete all as specified and directed.

S&F in repairs PVC Connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repair PVC Connection 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.

S&F in repair health faucet 15 mm bore with CP pipe set complete all as specified and directed.

Dismantling of cast iron drain pipes & fittings, jointed in cement mortor and taking out of trenches required internal dia of pipe 75 to 100 mm complete all as specified and as directed.

S&F 100 mm bore cast iron spun pipes, soil waste and vent pipe in any length with or without ears with cement joints fixed to walls/ceiling or laid in floor incl MS clamp 40 x 6 mm flat iron and 12 mm dia round iron stays including bolts and nuts including securing to wall in PCC (1:2:4) and making good in cement mortar (1:3), complete all as specified and directed.

All as per item No 95.00 above but 75 mm dia CI pipe complete all as specified and directed.

S&F in repairs 100 mm bore cast iron floor trap, nahani trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

All as per item No 97.00 above but 75 mm dia CI Trap complete all as specified and directed.

Demolition and breaking up drain pipes (SGSW, AC, PVC or reinforced cement) set in cement mortor internal dia of pipe 75 to100 mm complete all as specified and directed.

S&F 110 mm bore SWR pipes single socketed in any length with rubber ring joints fixed to walls ,floors, trenches etccomplete all specified and directed.

All as per item No 100.00 above but 75 mm dia PVC SWR pipe complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends with rubber ring joints fixed to walls complete all as specified and directed.

All as per item No 102.00 above but 75 mm dia PVC SWR bends complete all as specified and directed.

S&F in repairs CI fittings such as Tee/ bend/ branch piece/ floor trap etc upto 150mm dia (waste water/rain water/soil pipe) required to stop leakage including testing of leakage upto four storied building complete all as specified and directed. Note :- The necessary steel scaffolding upto eight storeyed whereever required to complete the job shall be provided by the contractor with all safety equipments and the rate for scaffolding & safty equipments shall be deemed to be included in the quoted rates by the contractor and nothing extra shall be paid on this account.

S&F in repairs PVC/UPVC fittings such as Tee/ bend/ branch piece/ floor trap etc upto 150mm dia (waste water/rain water/soil pipe) required to stop leakage including testing of leakage upto four storied building complete all as specified and directed. Note :- The necessary steel scaffolding upto four storeyed whereever required to complete the job shall be provided by the contractor with all safety equipments and the rate for scaffolding & safty equipments shall be deemed to be included in the quotted rates by the contractor and nothing extra shall be paid on this account complete all as specified and directed.

M&L for racking out cement/lead joints of CI pipes and filling with lead joints / neat cement plaster to stop leakage of joints complete all as specified & directed

S&F in repairs rotantional moulded polythylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top ) hoisted and fixed in position complete with ball valve of high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and screwd for iron pipe 20mm bore omplete all as specified and directed.

S&F in repairs rotantional moulded polythylene water storage tanks 1000 ltr capacity (cylindrical vertical with closed top ) hoisted and fixed in position complete with ball valve of high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and screwd for iron pipe 20mm bore omplete all as specified and directed.

S&F In repair 15 mm dia GI steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F in repair GI steel tubing medium grade galvanised 20mm dia with all fittingsand fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F in repairs plastic water closet seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

M&L for complete removal of existing treatment of old decorated surface of wall and applying two coats of oil emulsion distemper white/coloured over and including one coat of birla wall care based putty of 1.5 mm thick on walls/ ceiling (where it is required) all as specified and directed by Engr-in-Charge.

M&L for preparation of old concrete/ PCC tile surfaces by brooming with coir/wire brushes and washing down with water to remove the fine dust and applying two coats of Lacquer polish (1001) chemical with pigment as approved by GE complete all as specified and as directed by Engr-in Chage.

m/s modern builder (BID ID -3179976)