Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹8 L
EMD Value
₹16,000
Closing Date
7 Dec 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
GE 861 EWS
GE 861 EWS
REPAIR/ MAINT OF DG SETS AND SERVO CONTROLLED VOLTAGE STABLIZER BY OEMs AT KHUNMOH UNDER GE 861 EWS
2026_MES_798818_1
GE 861 EWS-76(T)/2026-27
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
GE 861 EWS
As per NIT
8 documents required · 8 mandatory
₹500
GE 861 EWS
₹16,000
GE 861 EWS
14 Nov 2026
14 Nov 2026
10 Dec 2026
14 Nov 2026
7 Dec 2026
30 Nov 2026
20 Nov 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Maintenance and servicing of standby DG Set complete including draining out of diesel from tank, cleaning the tank thoroughly and refilling the drained out diesel, draining out engine oil from the sump, cleaning the sump thoroughly and refilling the sump with new engine oil & it's required level & draining out of coolant from radiator, cleaning the radiator thoroughly and refilling the radiator with new coolant to it is required level. Replacing the fuel filter (primary & secondary filters), lubricating oil filter, check & clean air cleaner, change air cleaner elements, & make up the same filling the starting batteries with electrolyte/distilled water to maintain the required specific gravity, replace the u/s brass connectors for batteries, cleaning of battery terminals & applying petroleum jelly to battery terminal posts & brass connectors, including M & L for V Belts, checking of exhaust leakage, governor, breathers etc. adjust/set the same for proper functioning of DG Set, checking of fuel, oil and water/ coolant level etc, adjusting and keeping the fan belts to the desired tension, tightening all the bolts and nuts to the required torque etc, cleaning the DG Set with accessories as prescribed by the manufacturer and test for satisfactory running of DG set for two hour at connected load and record shall be made in respect of RPM, oil pressure, oil temperature, coolant temperature, voltage, frequency, load current, battery charging, fuel consumption etc complete all as specified and directed by Engineer in Charge for up to 10 to 20 KVA DG set. Note: - (a) Engine oil for refilling will be measured & paid for separately (b) Coolant for make up will be measured & paid for separately (c) Testing will be carried out in presence of Engineer & component will be as per manufactures recommendations (Rate (d) The Make of Fuel filter, Oil Filter, V belt & component will be as per manufacturer’s recommendations, of fuel filter, oil filter, air filter and V belt shall deem to be included in quoted rate.) | 1 | Each job | - | - |
| 2 | All as per item No. 1 above but for 25 to 30 KVA DG set | 2 | Each job | - | - |
| 3 | All as per item No. 1 above but for 63 KVA DG Set | 3 | Each job | - | - |
| 4 | Supply & refilling multi-grade 15W40 lubricating oil for DG Sets as per manufacturer's recommendations, complete all as specified and directed by Engineer-in-Charge. | 150 | Ltr | - | - |
| 5 | Supply & refilling coolant for radiator as per manufacturer complete all as specified and directed by Engineer-in-Charge. | 70 | Ltr | - | - |
| 6 | Repairs & Overhauling of radiator assembly by dismantling from engine transporting to the workshop and removing the sediments and scales, corrosion etc by means of acid, cleaning and high pressure water washing and air cleaning, gas welding / soldering with good quality material for stopping the leakage etc, re-assembling the same with new gaskets and transporting to the site, fixing to the engine with hoses, clips complete to the entire satisfaction of engineer - in - charge as required for DG Set Up to10 to 20 KVA DG set | 1 | Each job | - | - |
| 7 | All as per item No.6 above but for 25 to 30 KVA DG set | 2 | Each job | - | - |
| 8 | All as per item No.6 above but for 63 KVA DG Set | 3 | Each job | - | - |
| 9 | Dismantling & strip opening of self starter for 12 volt/24 volt inspecting /checking the complete parts & taking out worn out parts/unserviceable parts and making the self starter functional after replacing the new parts complete all as specified and directed by Engineer-in-Charge. Note: Spare parts shall be measured and paid for separately | 5 | Each job | - | - |
| 10 | Supply only the following items to self starter of existing make
(a) Armature assembly 12 volt suitable for 80 AH to 150 AH | 2 | Each | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.18 MB
Tender76T.pdf
Tender Documents • 0.65 MB
BOQ_896161.xls
BOQ • 8.22 MB
Credit76T.pdf
Additional Documents • 0.13 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .