Construction Tahshil Kutchehary cum halka Karmchari Residence at Datokhurd, Block- Katkamsandi, Dist-Hazaribag.

Earth work in excavation in foundation trenches in ordinary soil ( vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I.

Earth filling in foundaion trenches and plinth in layers not exceding 150 mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I. (mode of measurement compacted volume)

Providing coarse clean sand in filling in in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume)

Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size)

Providing designation 75B brick work in C.M (1:6 ) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar, joints cost of screening materials raking out joints to 15mm depth , curring , taxes and royalty all complete as per builiding specification and direction of E/I.

Providing designation 75 B brick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I.

Extra for brick work for each consecutive floor above first floor including watering and scaffolding, all complete as per direction of E/I.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.

Providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 {only valid for Tata (Tiscon),SAIL, JSPL, Electrosteel ltd. Bokaro and Vizag (RINL)} (a) 8mm dia Rod

(b) 10mm dia Rod

(c) 12mm to 32mm dia Rod

Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.

Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointing with white cement including rubbing, polishing and cost of curring taxes and royalty all complete as per building specification and direction and E/I. With "A" grade white 15X15cm Tiles.

Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : 11.23.5 Udaipur green marble

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 11.26.1 25 mm thick

Providing and laying Doublecharge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 / ISO 13006 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm .

Supplying Iron and Steel Materials as per specification and direction of E/I. For chaukhats in Door

Supplying, fitting and fixing 30mm thick solid core type non-decorative single leaf flush door shutter in door and windows with black board core blended with high quality phenol formal dehydes synthetic resine both side commercial veneered of standard make with oxidised iron fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I.

Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm ,made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos of 150mm long brackets of 15x15 mm M.S. square tube , the vertical door profiles to be renforced with 19x19mm M.S. square tube of 19 gauge, EDPM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size complete as per manufacturers specification and direction of E/I.

Providing and fixing to existing door frames 30mm thick factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gage thickness and size of 19mmx19mm for styles and 15x15mm for top& bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacturer.M.S. frame covered with 5mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45 degree angle on either side forming styles; and 5mm thick ,95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVCsheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail.Top bottom and lock railsshall be provided either side of the panel.10mm (5mmx2) thick ,20mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail,paneling of 5mm thick both side PVC sheet to be fitted in the M.S. frame welded/sealed to the styles & rails with 7mm (5mm+2mm) thickx15mm wide PVC sheet beading on inner side and joined together with solvent cement adhesive . An additional 5mm thick PVC strip of 20 mm width is to be stuck on the interior side'C' Channel using PVC solvent adhesive etc complete as per direction of E/I, Manufacturer's specification& drawing ( for W.C. and bath room door shutter).

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. 10.5.2 Using flats 30x6mm for diagonal braces and central cross piece

Supplying, fitting, and fixing M.S. Grill made of 20X6mm M.S. Flate as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I. (where materials is not supplied by the deptt.)

Supplying, fitting and fixing M.S. grill gate with M.S. grill made of 20X6mm M.S. flats or 16mm M.S. square bars fitted on 25X25X6mm M.S. Angle frame of size 60X60X6mm. Including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I.

Supplying, fitting and fixing 20 guage G.C.I. Sheet gate fitted on M.S. Angle frame of size 60X60X6mm. Including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I.

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. 10.26.1 M.S. tube

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by the rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I.

Providing two coats of synthetic enamel paint of approved shade and make over new wooden surface including cleaning the surface after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.

Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly, scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.

Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dust, dirt, scales smokes and grease and cleaning the surface throughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I. (Mode of measurement area shall be multiplied by the co-efficient as indicated in building specification)

Providing 250mm. Wide brick drain in cement mortar (1:6) with av. 150mm clear depth and 250mm apron including cost of eartwork involved with 75mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I.

Providing 12mm cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty with 1.5mm cement punning including curing, carriage of water with all leads and lift as per building specification and direction of E/I.

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

foundation

Plinth band

Stiffner

Stair Case Ground Floor & First Floor-

(i) Bricks av lead (7P+1K) = 8 km

(ii) Sand av lead 6 Km

(iii) Stone chips av lead 52 km

(iv) Stone Metal 52 Km

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)

Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper scaffolding , curing and taxes all complete as per building specification and direction of E/I.

Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Providing and fixing chloronited polyvinyl chioride (CPVC) pipe, having thermal stablity for hot & cold water supply, including all CPVC plain & brass threaded fittings,fixing the pipe with clamps at 1.00m spacing, this includes jointing of pipes & fitting with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engneer in change. 15 mm dia

20 mm dia

25 mm dia

Providing & fixing Chlorinated Polyvinyl Chloride (CPVC) for hot & cold water supply with clamps 1.00 meter specing with complete job. (External work)15mm dia

Making hole in wall for G.I. pipe and restoring the same after pipe laying as per specification and direction of E/I.125mm thick wall

Providing and fixing gun metal full way valve of approved quality, all complete as per specification and direction of E/I.25 mm dia

Providing and placing on terrace (at all floor levels) Polyethylene water storage tank of marke with cover and Suitable locking system in double layer confirming to IS : 12701-1996 Latest revision as as per specifications and direction of E/I.

Providing and fixing male ended 15mm dia brass bib cock of approved quality (wt not less than 350gms) with extra socket all complete as per specification and direction of E/I.

Providing and fixing male ended 15mm size C.P brass pillar cock (wt not less than 350gms) C.I body brass spndle pillar cock of approved quality as per specification and direction of E/I.b) C.I. body brass spindle

Providing and fixing N.P./C.P. brass/PVC porcelain shower rose of 15mm inlet etc all complete as per specification and direction of E/I.b) 125 mm dia C.P. shower

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :610x460 mm bowl depth 200 mm

Supplying fitting and fixing viterous white glazed earten ware wash hand basin of parry or hindustan or any other I.S. approved make supported on pointed C.I. or Rs (32 M.C.I brass west 15mm dia C.I body brass spindle cock of approved quality of weight not less than 350gms 32mm P.V.C.waste pipe 750mm long with brass coupling at one end and making plumber join ete. all complete as per specification and direction of E/I.

Supplying,fitting and viterous white glazed earthen ware I.W.C. of parry/Hindustan of any other I.S.S. approved make100 mm H.C.I 'P' trap 15 litre c.i pull and let go flushing system of names or other I.S.S equivalent make complete with all fitting c.i or c.c brackers 32mm alkathene/pvc telescopic flush pipe about 2m long with one brash coupling and clams G/I chain andpull including supplying and fixing a pair of viterous white glazed earthenware ware footrest to be fixed in floor 15mm C.I.body brass spindle stope cock of weight not less than 50gms 15mm P.V.C connection pipe 450mmlong abd tge exposed pipe and cistern with two coats of approved paint over a coat or red oxied two coat of approved paint over a coat or red oxied primer etc. all complete as per specification and direction of E/I. B) 580 mm long c) with 10 lit. low level PVC Cistern

Supplying, fitting and fixing the following items complete with all materials as per specification and direction of E/I.(2) C.P brass shop dish container medium quality with screw and hinges etc.

(b) Mirrors of 6 mm thick plate glass bevelled edge mirror including C.P brass revolving fittings, 3 mm plywood board and C P hinges to fix with mirrori) 600 mm x 450 mm si

( c) C.P brass towel rail 20 mm x 600 mm with bracket container

a) Glass shelf with C.P brass rail (1) 450 x 125 mm glass shelf complete

(xxii) Towel Ring

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS: 4382 leaving 10 mm gap for thermal expansion (i) Single socketed pipes. 110 mm dia

Providing and fixing on wall face unplasticised Rigid PVC moulded fitting/accessores for unplasticised rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS: 5382leaving 10 mm gap for thermal expansion Coupler 110 mm dia

110x110x110mm Single tee without door

110 mm bend

Shoe (Plain) Shoe 110 mm dia

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws Clip 100 mm dia

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.

Supplying materials and labours for constructing inspection chamber of designation class 75B bricks size 750mm deep, 600x450mm internal dimension having 250mm wall thickness in cement mortar (1:6) including 12mm cement plaster (1:4) with punning on inside and cement plaster (1:6) with 600x475mm G.I. Cover with frame (weight not less than 36kg.) alongwith earth work in excavation and 80 mm thick P.C.C. (1:3:6) in foundation and refilling all complete as per specification and direction of E/I.

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion, (i) Single socketed pipes.110 mm. diameter

Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 100 mm nominal size dia

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.

Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.

Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit,in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -incharge.

HYDT : Cost of drilling 200 mm x 165 mm x 125 meter deep bore well in all kinds of soil and rock in rural area for installation of pump set with Hydraulic DTH Rig machine, all complete including supplying all materials, tools, drilling rig, Air Compressor and equipments, as well as fuel, lubricants and cost of transportation of Rig machine and other vehicles up to the site.(a) From 0.0M to 50.0 M below G.L.

Carriage cost of materials all complete as per direction of E/I Stone Boulder Lead 52 Km

HYDT : Cost of drilling 200 mm x 165 mm x 125 meter deep bore well in all kinds of soil and rock in rural area for installation of pump set with Hydraulic DTH Rig machine, all complete including supplying all materials, tools, drilling rig, Air Compressor and equipments, as well as fuel, lubricants and cost of transportation of Rig machine and other vehicles up to the site. From 0.0M to 50.0 M below G.L.

From 51.00 M to 100.00 M below G.L.

From100.00 M to 125.00 M below G.L.

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 200 mm nominal size dia

Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc. all as per requirement and direction of Engineer-in-charge.

Supplying 100 mm dia submersible pump sets confirming to IS 8034 and motor confirming to IS 9283. Pump shall be suitable for various delivery head and discharge with stainless steel pump shaft andpolypropylene/ noryl impeller. Motor suitable for working on 415V+10%, 3PH, 50 Hz, A.C. supply with cable guard, thrust carbon/ fiber bearing to withstand entire hydraulic thrust, water proof winding shall be provided. The pump set shall be suitable for direct coupling. Pump shall have suitable outlet as per manufacturers design. Anti thrust stream lined non (1.5 HP)

Suppying, fitting and fixing 4 KVA stabilizer of L& T 0r any approved ISI mark to control the voltage all complete as per specification and direction of E/I.

S/F/F Starter Pannel board including voltmeter, ameter, On/Off switch and provision for dry run protection as per IS Specification for 2 H.P. submersible motor pump encased in painted mild steel sheet box with glass front and looking arrangement complete assembly mounted on wall all complete job as per direction of E/I.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. (b) 32 mm nominal outer dia Pipes

3 Core PVC insulated PVC sheated copper conductor flat submersible cable. Supplying flate flexible submersible cable with copper conductor PVC insulated and PVC sheathed. FR PVC insulated 3 Core 4 Sq. mm copper wire.

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: (iii) 23.13.3 200 mm dia

Providing and fixing M.S. clamp of required dia to the top of casing/housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. (iii) 23.14.3 200 mm clamp

Point wiring in PVC conduit, with pano type switch :- Wiring for light point/fan point/exhaust point/call bell point, with 1.5 sq.mm FR PVC insulated copper conductor single core in surface/recessed PVC conduit, piano type switch, phenolic laminated sheet with suitable size PVC/MS box as required.Group B

Power plug wiring in PVC conduit (2 x 4 sq. mm) :- Wiring for light plug with 2 x 4 sq.mm. FR PVC insulated copper conductor single core cable in surface/recessed PVC PVC conduit along with 1 Nos. 4 sq.mm. FR PVC insulated copper conductor single core cable for loop earthing as required.

"S/F Piano type switch /socket :- Supplying and fixing of following piano type switch/socket on the existing switch box/cover including connections etc. as required. 5/6 amps, one way switch

3 pin 5/6 amps, socket outlet

Wiring for Circuit/submain wiring along with earth wire with the following sizes PVC insulated copper conductor, single core cable in surface/recessed PVC conduit as required. 2x1.5 sq.mm + 1x1.5 sqmm earth wire

2x2.5 sq.mm + 2.5sqmm earth wire

2x6 sq.mm +1x6sqmm earth wire

Supplying and Fixing Piano type Switch/Socket on existing Switch Box/Cover including connection etc. as requared. Electronic step fan regulator, mini

S/F power plug point with piano type accessories:- Supplying and fixing suitable size GI/PVC box of 121 mm x 173 mm x 48 mm/ (6'' x 8'') (nominal size) on surface or in recess with suitable size of phenolc laminated sheet cover in front including providing and fixing 6 pin 15/16 amps socket outlet and 15/16 amps piano type switch connection, panting etc, as required.

S/F ceiling rose:- Supplying and fixing 2pin 5amp.ceiling rose on the existing junction box wooden block including conection etc. as required.

S/F Batten holder :- Supplying and fixing batten holder / angle holder including connection etc.as required.

Supply Installation ,testing and commissioning of follwing size ceiling fan 3 Blades confirming to IS:374:2019 including wiring the down rods of standard lenth (upto 30cm) with 1.5Sq mm. FR PVC insulated, copper wire suitable for 230V 50Hz, single phase supply etc. complete as required.1200mm(48") Ceiling Fan

Supplying and fixing of following way single pole & neutral, sheet steel, MCB distribution board, 240 volts, on surface/recess, complete with tinned copper bus bars, neutral bus bar, earth bar, din bar, interconnection, power painted including earthing etc .as required (But without MCB/ RCCB/Isoator) 6 Way.Single door

Supplying and fixing 6amps to 32 amps, rating, 240 volts,KB ,"B" curve miniature circuite breaker suitable for inductive load of following poles in the existing MCB DB complete with connection, testing the commissioning etc. as required . 6/32 amps single pole, "B" series

S/F DP MCB isolator :- Supplying and fixing followng rating, double pole ,240volts, solator in the existing MCD DB complete with connections,testing and commissioning etc as required.40 amps

S/F rewireable double pole/TP&N Switch disconnector :- Providing and fixing following DP/ TP& N Sheet metal swtch disconnector fuse unit in the existing metal board with rewirecable type fuses, including drilling holes in metal board, making connections, etc as required. 32 amps,double pole

Laying of 1 number PVC insulated and PVC sheathed/XLPE power cable of 1.1kv grade of size not exceeding 35 sq.mm direct in ground including excavation sand cushioning, protective covering and refiling the trench etc as required.

S.I.T.C. of following rating surface mounted LED tube light fitting suitable for 230V 50 Hz, single phase supply etc. complete as required.10/12W LED Tube light

Supplying ftting and fxing 9/10 Watt LED Bulb as required.

Earthing with G.I earth pipe 4.5mtr long 40mm dia including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required.

Providing and fixing 25mm x 5mm G.I. strip in 40mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re- filling etc. as required.

Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item –B) and disposal of excavated earth as obtained to a distance up to 50 M. Trenches , removing roots of trees , shrubs all complete as per approved design, Building specification and direction of E/I.

Supplying Un Skilled Labour for Cleaning the Site all complete job as per specification and direction of E/l.

Add GST 18 %

Add L.Cess 1 %

Please Enable Macros to View BoQ information