Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.6 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹38.5 L+₹1.5 L (4.18%)Rejected-Finance R O IQBAL MARKET AALI MAJID EIDGAH SRINAGAR KASHMIR | SRINAGAR | JAMMU AND KASHMIR | 190001 | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹41.2 L+₹4.3 L (11.6%)Rejected-Finance IKHRAJ PORA JAWAHAR NAGAR SRINAGAR KASHMIR | SRINAGAR | JAMMU AND KASHMIR | L3 | Rejected-Finance Other than lowest bidder | |
| 4 | L4₹42.3 L+₹5.3 L (14.4%)Rejected-Finance BATWARA SRINAGAR KASHMIR 190004 | SRINAGAR | SRINAGAR | JAMMU AND KASHMIR | 190004 | L4 | Rejected-Finance Other than lowest bidder | |
| 5 | L5₹43.0 L+₹6.0 L (16.4%)Rejected-Finance | L5 | Rejected-Finance Other than lowest bidder |
Tender Value
₹44.8 L
EMD Value
₹89,500
Closing Date
2 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 864 EWS
GE 864 EWS, C/o 56 APO
ADDN/ALTERATION OF BLDG NO. P-883 INTEGRATED MOTHER AND CHILD CARE CENTRE OF 92 BH AT BB CANTT, SRINAGAR
2024_MES_639330_1
864/WS-75/2023-24
Open Tender
Civil Works
Item Rate
150 days
BB Cantt
As per NIT
7 documents required · 7 mandatory
₹500
GE 864 EWS
₹89,500
Yes
23 Mar 2024
27 Jan 2024
7 Mar 2024
27 Jan 2024
2 Mar 2024
17 Feb 2024
Amount
Dismantling of plain or corrugated steel sheeting, any gauge thickness, including nanital or similar pattern roof covering complete all as specified and directed.
Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified and directed.
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified & directed.
Demolition of cement concrete (reinforced) of roof slab, beams, stair case, landing, chajja and similar suspended work not otherwise provided for, complete all as specified & directed.
Taking down roof trusses, coupled rafters or trussed beams upto 4m clear span complete all as specified & directed.
Dismantling of timber scantlings 40 sq. cm and over in section, in any position (unframed work) complete all as specified.
Dismantling old unserviceable water tanks of capacity exc 250ltr but n.exc 500ltr and removing from site complete all as specified and directed.
Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.
Taking up or down 15mm dia steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed.
Taking up or down 20mm dia steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed.
Dismantling of cast iron or reinforced concrete drain pipes of dia 100/150mm, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed.
Taking down frame with shutters (without taking off shutters from frame) n.exc 1.5 sq.m each and removing from site including cutting holes for taking out existing hold fast and making good the distrubed portion of jambs and adjoining surface to match with existing finish complete all as specified and directed.
Taking down frame with shutters (without taking off shutters from frame) exc 1.5 sqm but n.exc 4 sqm each and removing from site including cutting holes for taking out existing hold fast and making good the distrubed portion of jambs and adjoining surface to match with existing finish complete all as specified and directed.
M&L for cutting openings, through brick walls built in cement mortar or cement lime mortar through walls for door, window and other openings or enlarging existing openings, converting window into door openings, etc. or cutting out defective brick work for under- pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc from site not exc. 50m omplete all as specified and directed.
Cutting into old masonry built in cement mortar to form toothings for and bonding in new brick or stone work including making good in mud mortar but making good in cement mortar of the same mix as for new walling omplete all as specified and directed.
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof overing/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof overing/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F 25mm thick 2nd class soft wood clean swan boarding fixed with nails in any situation as ib eaves board complete all as specified and directed.
S&F 2nd class hard wood clean swan as in scantling complete all as specified and directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.
M&L for preparation of new wooden surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S&F 6mm thick Non Asbestos fibre cement /Pre Laminated self embosssed texture designer E-Board classic size 600x600mm, HPSC (High pressure steam cured) to be fixed or inserted to pre laminated GI frame work for seamless ceiling size 600mm x 600mm with main runner 38x24x0.9mm thick, cross tee 8.6x24x0.9mm and wall angle 19x19x0.9mm duly suspended with 6mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip complete all as specified and directed.
S&F 10mm thick PVC insulation panels with EPS stuck to 1mm printed PVC sheet suitably placed in false ceiling including necessary fillets/cornices at the edge including grid made of Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre with 6mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip complete all as specified and directed.
S&F powder coated aluminium anodised (minimum thickness of powder coating 50 micron) doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections/ 3 track and other sections of approved make conforming to IS-733 and IS-1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and directed.
S&F aluminium anodised door shutters powder coated of any colour (Thickness or powder coating not less than 50 micron) anodised, aluminium section weighing not less than 0.55kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws, handle, locking arrangement etc. complete all as specified and directed.
S&F aluminium anodised window and ventilator shutters powder coating of any colour (Thickness or powder coating not less than 50 micron) fixed type/sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handle, locking arrangement etc. complete all as specified
S&F 4mm thick sheet glass (frosted on one side) ordinary quality and glazing with oil putty or aluminium power coated beads in squares/rectengular not exceeding 0.50 Sqm in each pane complete all as specified.
S&F stainles steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden beads when fixed in pannels of joinery complete all as specified and directed.
Excavation in trenches, n. exc. 1.5 m wide and n.exc 1.5 m in depth, for foundation and getting out in hard/dense soil complete all as specified and directed.
Returning filling in including, spreading, leveling and well ramming in layers not exceeds 25 cm thick in any type of soil complete all as specified and directed.
Removing excavated material to a distance not exceeding 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed.
M&L for PCC (1:4:8), Type D-2 (using 40mm graded crushed stone aggregates) as in foundation filling and mass concrete complete all as specified and as directed.
M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.
M&L for Mild steel TMT bars 5mm dia and over and including 10mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.
M&L for RCC (Nominal mix) 1:2:4 type B-1, using 20mm graded crushed stone aggregate for foundation, includng raft footings, foundation beam, plinth beams, bases for columns, etc complete all as specified & directed.
M&L for RCC (Nominal mix) 1:2:4 type B-1, using 20mm graded crushed stone aggregate as in colums, pillars, piers, posts and struts complete all as specified & directed.
M&L for RCC (Nominal mix) 1:2:4 type B-1, using 20mm graded crushed stone aggregate as in beams, cantilevers, bressumners, lintels over 1.5m span complete all as specified and directed.
M&L for RCC (Nominal mix) 1:2:4 type B-1, using 20mm graded crushed stone aggregate as in chajja complete all as specified and directed.
M&L for RCC (Nominal mix) 1:2:4 type B-1, using 20mm graded crushed stone aggregate as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including use and waste formwork complete all as specified and directed.
Form work to sides of concrete foundations, footings, bases of columns, rafts and raft beams, sides and soffits (if any) of foundations and plinth beams and similar work rough finished surface complete all as specified and directed.
Form work to sides of pillars posts, struts, piers, columns and stanchion for rough finished surface complete all as specified and directed.
Form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs,etc. also splays between floors and beams, etc for rough finished surface complete all as specified and directed.
Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exc 200mm thick (horizontal or sloping in rough finished surfaces of concrete complete all as specified and directed.
M&L for brick work with old size sub class 'B' bricks straight or curved on plan exc 6m mean radius and built in CM 1:6 complete all as specified and directed.
Taking down cement plaster of any description, on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M & L for rendering 15mm thick in CM (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
M & L for rendering 15mm thick in CM (1:4) on other than fair faces of brick work or concrete surfaces finished even and fair complete all as specified and directed.
M & L for rendering 5mm thick in CM (1:3) on ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of new plastered surface of wall and applying two coats of cement base paint complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of suitable primer complete all specified and directed.
M&L for preparation of new plastered surfaces of ceiling and applying two coats of oil bound distemper over a coat of suitable primer complete all specified and directed.
M&L for preparation of new plastered surfaces of walls/ceiling and applying two coats of plastic emulsion paint over a coat of suitable primer complete all specified and directed.
M&L for preparation of treated surfaces of walls/ceiling and applying one coat of plastic emulsion paint complete all specified and directed.
S&F 16mm dia, 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all specified and directed.
S&F 20mm dia, 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all specified and directed.
S&F 110 mm dia PVC (SWR) pipes including necessary bends, fittings etc single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed.
S&F 75mm dia PVC (SWR) pipes including necessary bends, fittings etc single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.
S&F stack clamps out of 50mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75mm dia of pipe complete all as specified and directed.
S&F PVC(SWR) branch pieces single (equal or un equal), 110mm bore complete all as specified and directed.
S&F PVC(SWR) branch pieces single (equal or un equal), 75mm bore complete all as specified and directed.
S&F PVC (SWR) bend any radius of 110mm bore complete all as specified and directed.
S&F PVC (SWR) bend any radius of 75mm bore complete all as specified and directed.
S&F PVC (SWR) 'S' trap of 110mm bore complete all as specified and directed.
S&F PVC (SWR) vent cowl trap of 110mm bore complete all as specified and directed.
M&L for digital Non skid ceramic tiles 8 -10mm thick (square/ rectangular) area of each tile not exceeding 0.36sqm, in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including 15mm thick screed bed in CM 1:4, complete all specified and directed.
M&L for digital glazed ceramic tiles in vertical surface of size 600x300x7-8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match fixed over and including 10mm thick backing coat in CM 1:4, complete all as specified and directed.
S&F Wash hand basin (Vanity) long patterntype of size 78x48cm including all fittings and decorative cabinet with door/shutter and 02 Nos drawers complete all as specified and directed.
S&F Vitreous China wash down water closet one piece pan (pedestal pattern), white (including all fixing bolts, flushing cistern, jet spray and flush pipe) complete all as specified and directed. Make : Jaquar Cat No-Lys-Wht -38851S300UFSMN or techno commercially equivalent in Kohler/Pearl/ROCA/Plumber.
S&F shower rose large over head shower CP with arrow complete all as specified and directed. Make : Jaquar Cat No- OHS-CHR -1637 or techno commercially equivalent in Kohler/Pearl/ROCA/Plumber.
S&F in repairs CP towel rack complete all as specified and directed. Make- Jaquar Cat No- AKP-CHR-3578195 or techno commercially equivalent in Kohler/Pearl/ROCA/Plumber.
S&F tubular holder (Liquid Soap Container) CP complete all as specified and directed. Make : Jaquar Cat No- AKP-CHR-35741P or techno commercially equivalent in Kohler/Pearl/ROCA/Plumber.
S&F single towel rail 600 mm long complete all as specified and directed. Make - Jaquar Cat No- AKP-CHR -35711PS or techno commercially equivalent in Kohler/Pearl/ROCA/Plumber.
S&F wall mixer telephonic type single lever 3 in 1 with telephonic shower complete all as specified and directed. Make : Jaquar Cat No- KUP-CHR-35125PM or techno commercially equivalent in Kohler/Pearl/ROCA/Plumber.
S&F single lever basin mixer complete all as specified and directed. Make : Jaquar Cat No-KUP-CHR-35011BPM or techno commercially equivalent in Kohler/Pearl/ROCA/Plumber.
S&F angular stop cock fancy type CP complete all as specified and directed. Make : Jaquar Cat No- KUP-CHR-35053PM or techno commercially equivalent in Kohler/Pearl/ROCA/Plumber.
S&F toilet paper holder of stainless steel of size 10.5cmX9 cm fixed to wall with chromium plated CP brass screw. complete all as specified and directed. Make : Cat No-AKP-CHR-35753P or techno commercially equivalent in Kohler/Pearl/ROCA/Plumber.
S&F glass shelf 600mm long 125 mm wide CP complete all as specified and directed. Make : Jaquar Cat No- ACN-CHR -1171N or techno commercially equivalent in Kohler/Pearl/ROCA/Plumber.
S&F in repairs corner glass shelf, three set type, of size 300x300mm (lower), 225x225mm (medium) & 150x150mm (upper), fixed with CP brass screws, complete all as specified and directed. Make : Jaquar Cat No- ACN-CHR -1173N or techno commercially equivalent in Kohler/Pearl/ROCA/Plumber.
S & F CP grating 150mm dia complete all as specified and directed.
S&F 100mm dia PVC (SWR) multi floor trap, with CP grating including jointing to waste pipe with solvent cement complete all as specified and directed.
S&F CP Jet spray for EWC with CP flexible pipe with fitting complete all as specified and directed.
S&F PVC connections 450mm long, 15mm dia with PTMT nuts and washer both ends complete all as specified and directed.
M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab or wherever as directed with suitable arrangement complete all as specified and directed.
S&F 500 litres capacity rotational moulded polye-thylene water storage tanks triple layers (cylindrical vertical with closed top) hoisted and fixed in position on staging or roof with locking arrangement, over flow pipe, brass float valve 20mm dia highh pressure with polythelene float and flynut suitable fpr 20mm dia iron pipe all as specified in SSR Part I complete all as specified and directed.
M&L for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in lintels upto 1.5 m clear span, railing upto 60cm height, cills, steps, seismic and other similar bands, plinth courses, copings, bed plates and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary form work complete all as specified and directed.
M&L for cutting into existing manholes for connecting new drains 150mm dia making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete al as specified and directed.
S&F reinforced concrete pipes of 150mm bore class NP-2 with collar laid in trenches and jointed with CM 1:1 complete all as specified and directed.
M&L for concrete in PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150mm bore pipe complete all as specified and directed.
S&F rolled mild steel in compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc coforming to Fe-410 W Gde 250 quality A.
S&F structural steel work as in Roof trusses (framed), trussed, purlins crane gantries, rails & fastenings & heavy brackets framimg (Beam, tee, angle, channel or flat section) including distance pieces, cleats etc. Structural steel conforming to Fe-410W, Grade-E 250, Quality 'A' complete all specified and directed.
M&L for preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil, comlete all as specified and directed.
M&L for broken stone hard core of gauge n. exc. 63mm deposited, spread and levelled in layer n. exc. 15cm thick watered and rammed to a true surface complete all as specified and directed.
Excavation in post holes (or similar holes) each n. exc. 0.5 cum in hard/dense soil and getting out returning filling in and ramming earth or broken rubble mixed with eareth around in layers not exc. 25 cm watering and removing surplus soil to a distance n. exc 50 m and making good surface complete all as specified and directed.
M&L for PCC (1:2:4), Type B-2 (using 40mm graded crushed stone aggregates) as in foundation, filling and mass concrete complete all as specified and as directed.
M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in sub base/levelling course complete all as specified.
M&L for 75mm thick PCC (1:4:8), Type D-2 (using 40mm graded crushed stone aggregates) as in sub base or floors etc. complete all as specified and as directed.
Taking down carefully existing old burn out/unserviceable copper/aluminium point wiring any type (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting and also disconnection of electrical wiring and gas pipe line connections from the existing pipe line alongwith multipurpose extension power board box and refixing the same after completion of complete wiring and making electrical & gas pipe line connections for functioing of system etc. removing old materials from site and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.
M&L for point wiring with PVC insulated FRLS wire, 1100 volt grade with multistranded copper conductor wire of size 1.5 Sq.mm (Nominal area) any type any length drawn through in heavy duty ISI marked PVC Casing capping / PVC conduit of suitable size along with its all connected fittings accessories including providing of modular type/size of pressed steel terminal sunken boxes 1.2 mm thick or PVC flush type box and dully fixed it concealed on wall or surface on wall and providing alongwith modular type back and face top covered plate for housing / mounting of switches sockets, regulators etc and also using /drawind of 1.5 sqmm PVC insulated FRLS wire , 1100 Volt grade (ISI Marked) with multistranded copper conductor wire used as a continuous earth wire which is connected with terminated the box to ceing rose / fitting complete and including making good to all disturbed surfaces of wall/ceiling and floor area of wiring system and to match the existing surface of wall/floor/ceiling etc. all as specified and directed for following:-
One light/fan point controlled by one way switch 5 Amp
One 3/5 pin socket outlet, 5 Amps on same board
One 3/5 pin socket outlet, 5 Amps on independent board
One bell point controlled by one way switch 5 Amp
All as per Sl item No.100 above but using PVC insulated FRLS wire, 1100volt grade with multistranded copper conductor wire of size 2.5 Sqmm (Nominal area) (ISI Marked) for 3/6 pin type15 Amp socket outlet point wiring system with controlled by one way switch fixed on independent board and also providing of 2.5 sqmm PVC insulated FRLS wire , 1100 Volt grade (ISI Marked) with multistranded copper conductor wire used as continuous earth wire complete all as specified and directed
All as per Sl item No.100 above but using single runs of PVC insulated FRLS wire, 1100 volt grade with multistranded copper conductor wire of size 4 Sqmm (Nominal area) (ISI Marked) fixed on independent board and also providing of 4 sqmm PVC insulated FRLS wire, 1100 Volt grade (ISI Marked) with multistranded copper conductor wire used as continuous earth wire complete all as specified and directed
S&F modular type switch 5/6 Amps 220 Volts , one module type/ size complete for one way complete as specified and directed.
S&F modular type socket 5/6 Amps AC 220 Volts 3/5 pin type combined with two modular type/size complete all as specified and as directed.
S&F modular type switch 15/16 Amps 220 Volts , one module size/type for one way complete all as specified and as directed.
S&F modular type socket 15/16 Amps AC 220 Volts 5/6 pin type combined with two modular size/type complete all as specified and directed.
S&F modular type bell push switch 5/6 Amps 220 Volts, one module size/type complete all as specified and as directed.
S&F bell Ding Dong Type, AC 230 volt, Single Pole complete all as specified and as directed.
S&F ceiling rose three terminals type made out of polycarbonate , isolated body complete all as specified and directed.
S&F modular type fan regulator with hum free step type alongwith speed control know of capacity 120 watt 230 Volts , one module size/type complete complete all as specified and as directed.
Supply and fixing of wall mounted slim batten type decorative integrated design LED tube light fitting of rating capacity 1 x 20W/ 22W with eletronic driver and fitting extruded body made of aluminum housing with high quality polycarbonate diffuser with long life energy saving and required fitting used in both warm/white type coluor set complete including providing of suitable type of flat fexible two / three core cable for electric connection including taking down old fitting complete all as specified and directed. Make : Philips model No - BN021LED22S 6500K /4000K PSU GR, Havells model No.-LUMILINEPLUSNEOBS22WLED865SPCSSIND & Crompton model No-CCS-100-20-65-HL2-DP-NWH.
S&F in replacement energy saving long life recessed / ceiling concealed mounted flat unique square slim panel integrated design LED luminaire light panel type fitting of size 595 mm x 595 mm or fitting of size 2x2 feet type of rating wattage capacity 36W/40W of supply voltage 220AC decorative type with high performance LEDs and electronic driver with extruded body made of aluminium housing with mounting slot and fully diffused recessed mounted LED luminaire high quality with surge protection energy efficient for ready to use and required in warm/white type colour fixture complete including making suitable type/size of new hole cutting on existing ceiling surface or extra side hole cutting in existing hole for fixing fittings (if required at site) for fixing of light fitting purposed and also providing of suitable type flat flexible three core cable for electric connection purposed complete all as specified and as directed . Make : Philips model No. RC375B LED 36S 865/840 PSU W60L60 52 WH, Havells model No. VENUSNE02X2PLR36WLED865 PRALMOD Crompton model No- CCR-127-36-57-SL-NWH.
Supply and fixing of decorative profile wall mounted LED mirror light fitting 20 Watt 6500 K of size 57.5CM long or 2 fit long with aluminium channel environmental friendly energy efficient and long life energy saving and required fitting use in both warm/white type colour set complete set complete set and including providing of suitable type of flat flexible two/three core cable and making electric connection and including taking down of old fitting all as specified and directed. Make of Havells & model -LHEXARP7IN1W020 or equivalent specification and model & make of Philips /Crompton
Supply and fixing of surface mounted decorative wall mounted bracket light fitting with having gold finish fixture with cognac hammered clear glass diffuser suitable for 7.5W LED filament lamp E27 base including providing of 1Nx9W LED lamp/1Nx7.5W LED filament lamp complete light fitting with having bulb holder based adaptor alongwith providing of 01 Nos of 7W/9W LED bulb in required fitting use in both warm/white type colour complete set complete set and including providing of suitable type of flat flexible two/three core cable and making electric connection and including taking down of old fitting all as specified and directed. Make of Havells & model -LHFOAJD1TZ1A060 or equivalent specification and model & make of Philips /Crompton
Supply and fixing surface mounted LED decorative type angle adjustable spot light / bed side study lamp light fitting with having matt finish for premium aesthetics based of suitable rating capacity 7Watt LED 6500K fixture in required fitting use in both warm/white type colour complete set including providing of suitable type of flat flexible two/three core cable and making electric connection and including taking down of old fitting all as specified and directed. Make of Havells & product code/ model No- LHEEGBPGPH1W007 or equivalent specification & model and make of Philips/Crompton
Supply and fixing of environmental friendly LED street light fitting of rated capacity 45W out door type made out of pressure die cast hosing with glass and high performance polycarbonate optics with LEDs with drives and having IP 65/66 protection and surge to heat resistant sink for better heat dissipation and including to ready for use and required in both warm/white colour type fixture complete set including providing of suitable dia or as recommended by manufacturer GI pipe light grade bracket and it to match/setting the new fitting fixture hole attachment system of suitable bracket length upto 1.2 mtr long and make to shape / bend of 120 degree angle including duly fixed alongwith existing pole /bldg wall/ roof with the help of 02 Nos of MS fixing clamp alongwith nut bolt and including providing of suitable type of flat flexible two/three core cable and making electric connection and including taking down of old fitting all as specified and directed. Make of Philips & model No - BRP031 LED45 CW/WW MR PSU GR DX or equivalent make of Havells & model -ENDURASUNDOWNSL45WLED765PASYBOPC or equivalent make Bajaj & model No- ENXT P54L WH PO PC SD MT
Supply and fixing surface mounted LED bulk head luminaries light fitting of rated capacity 10W out door type with dust and water proof, with PVC housing and unbreakable polycarbonate opal with in built surge protection with IP 65/66 protection rating, energy efficient for ready to use and required in both warm/white type colour fixture complete including dully fixed on bldg wall surface including providing of suitable type of flat flexible two/three core cable and making electric connection and including taking down of old fitting all as specified and directed. Make of Philips & model No - WT202W LED10S or equivalent make of Havells model -HEXAFT10WLED857SSYMBOPC or equivalent make Bajaj & model No- BIBWP 10W LED
Supply and fixing of angular/batten type shape lamp holder with PVC/ Polycarbonate insulated body, alongwith brass adaptor and back plate for housing of bulb Including providing of rechargable LED bulb of capacity 9 watt warm/ white colour type complete all as specified and directed .
S&F ceiling fan 1200mm sweep and minimum air delivery 210CFM with BEE norms 5 star rating of single phase 220 volt AC alongwith blade and down rod and providing of lonf type MS fan hook alongwith, flate flexible copper wire for all electrical connection including taking down old ceiling fan and deposited in AGE E/M store yard complete all as specified and directed
S&F wall mounted fan 400mm sweep with pull cord oscillating type single piece AS blade three speed pull cord control complete and suitable for single phase 220 volt AC alongwith blade and providing suitable type flate flexible copper wire for all electrical connection including taking down old fan and deposited in AGE E/M store yard complete all as specified and directed
S&F ventilating exhaust fan 300mm sweep made out of mild steel body with louvers and shutter 230volt, 50Hz, 1200RPM, copper winding and making suitable type/size hole in wall and providing suitable type flate flexible copper wire for all electrical connection including taking down old fan and deposited in AGE E/M store yard complete all as specified and directed
S&F electric water heater storage type steel body with inner copper tank of storage capacity 25 ltr, BEE 5 star rating and providing all connecting accessories and electrical connection including taking down old water heater and deposited in AGE E/M store yard complete all as specified and directed
S&F in replacement sheet metal enclosure duly powder coated with single pole and neutral enclosure with having a two pin and earth plug socket base & metal plug top and having mounting channel and complete with one MCB SPN 32 Amp and making all necessary electrical connection and dully fixed surface on wall or concealed in wall with the help of cutting chases to wall for fixing of DB and making good the disturbed wall surface all as required at site complete all as specified and as directed.
S&F in replacement sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrangement system suitable of rating of size/type of vertical load line shape type distribution board VTPN 4 way type 415 volt 3 phase AC supply holding system with IP-43 1K-09 protection system ISI marked and having mounting base channel and connection bus bar system suitable for MCCB as incomer and MCB as outgoing complete with appropriate size copper bus bar and neutral & earth link and blanking plates complete including providing in side of box on 01No MCCB TPN 160 Amps with breaking rapturing capacity 25 KA having adjustable setting type alongwith 12 Nos of MCB SP 63 Amps 'C' curve of the same make as per of distribution board make and making all necessary electrical connection and dully fixed it surface in wall or concealed on wall with the help of cutting chases to wall for fixing of DB and making good the disturbed wall surface all as required at site complete all as specified and as directed.
S&F in replacement sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrangement system suitable of rating of size/type of distribution board SPN 12 way type 220 volt AC supply system with IP-43 protection system and having mounting channel with having suitable rating of copper bus bar and suitable size of common neutral and earth link and also making all necessary electrical connection and dully fixed surface on wall or concealed in wall with the help of cutting chases to wall for fixing of DB and making good the disturbed wall surface complete all as specified and as directed.
Description all as per serial item No. 125 described here-in-before but SPN 8way system
Description all as per serial item No. 125 described here-in-before but SPN 6way system
S&F MCB SPN 40 to 63 Amps, 230 Volts, 50 Hz AC supply suitable for 'C' series, 10 KA breaking capacity complete all as specified and directed.
S&F MCB SP 40 to 63 Amps, 230 Volts, 50 Hz AC supply suitable for 'C' series, 10 KA breaking capacity complete all as specified and directed.
S&F MCB SP 6 to 32 Amps, 240 Volts, 50 Hz AC supply suitable for 'C' series, 10 KA breaking capacity complete all as specified and directed.
S&F Sub main wiring system with two runs PVC insulated FRLS wire, 1100 volt grade with multistranded copper conductor wire of size 2x10Sqmm and one run of 1x10 Sqmm (Nominal area) (ISI Marked) as in earth wire any type any length drawn through in heavy duty ISI marked PVC Casing capping / PVC conduit of suitable size along with its all fittings and connected accessories and duly fixed concealed on wall or surface on wall including taking down old unservicable sub main wiring system and making good all disturbed surfaces match to the existing surface complete all as specified and directed . Note:- 3 runs of 10sqmm wire and one run of PVC cassing capping/conduit shall be measured and 1.0 RM.
S&F Sub main wiring system with two runs PVC insulated FRLS wire, 1100 volt grade with multistranded copper conductor wire of size 2x6Sqmm and one run of 1x6 Sqmm (Nominal area) (ISI Marked) as in earth wire any type any length drawn through in heavy duty ISI marked PVC Casing capping / PVC conduit of suitable size along with its all fittings and connected accessories and duly fixed concealed on wall or surface on wall including taking down old unservicable sub main wiring system and making good all disturbed surfaces match to the existing surface complete all as specified and directed . Note:- 3 runs of 6sqmm wire and one run of PVC cassing capping/conduit shall be measured and 1.0 RM.
S&F Sub main wiring system with two runs PVC insulated FRLS wire, 1100 volt grade with multistranded copper conductor wire of size 2x4Sqmm and one run of 1x4 Sqmm (Nominal area) (ISI Marked) as in earth wire any type any length drawn through in heavy duty ISI marked PVC Casing capping / PVC conduit of suitable size along with its all fittings and connected accessories and duly fixed concealed on wall or surface on wall including taking down old unservicable sub main wiring system and making good all disturbed surfaces match to the existing surface complete all as specified and directed . Note:- 3 runs of 4sqmm wire and one run of PVC cassing capping/conduit shall be measured and 1.0 RM.
S&F Sub main wiring system with two runs PVC insulated FRLS wire, 1100 volt grade with multistranded copper conductor wire of size 2 x 16 Sqmm and one run of 1 x 16 Sqmm (Nominal area) (ISI Marked) as in earth wire any type any length drawn through in heavy duty ISI marked PVC Casing capping / PVC conduit of suitable size along with its all fittings and connected accessories and duly fixed concealed on wall or surface on wall including taking down old unservicable sub main wiring system and making good all disturbed surfaces match to the existing surface complete all as specified and directed . Note:- 3 runs of 16 sqmm wire and one run of PVC cassing capping/conduit shall be measured and 1.0 RM.
M&L for earthing, complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (Earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.5 mtr below normal ground level connecting to the galvanised iron earth lead wire of 4mm dia by means of bolts, nuts, check nuts and washers of galavanised iron and earth strip protected by provision of GI light grade pipe 20 mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded of stone aggregate with XPM (weight not less than 4 Kg/Sqm) and frame of angle iron 25x25x6mm with lugs 02 Nos and with 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate common salt and charcoal filling test point made out of 40mm/6mm flat iron with fixing arrangement funnel wire mesh and earth work in hard dense soil returning filling in and removal of surplus soil to a distance not exceeding 50 mtrs all as per electrical plate No 03 of SSR-2009 Part-I and connecting to earth test point complete all as specified and directed.
M&L for taking down carefully existing storage water heater/ceiling fan/exhaust fan/wall mounted fan any type any size and removing fan blade including cleaning all dust particles and removing connection including cleaning of inner tank and assembly and filling cavities with filler material, including painting with one coat of synthetic enamel white paint by spraying and assemble the same and hanging/refixing at location as directed, along with all connecting fixing accessories like fastner/ nut, bolt, washer, PVC connection and Valve etc with all electrical wire connection complete all as specified and directed.
M/S SHIMAR STAR GLACIER
M/S SK ATLANTIC ENTERPRISES
M/S MOHAMAD YOUSUF AKHOON AND SONS
M/S REDLY ENGINEERS
M/S BASHIR AHMAD MIR
M/S Vivek Gupta and Co
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .