PROVN OF SINGLE JCO OR ACCN AT IMH COMPLEX AT KOLKATA UNDER GE ALIPORE KOLKATA

Amount

MISC B/R & E/M PORTION Surface excavation n exc 30 Cm and average 15 Cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth for foundation, shafts, wells, cesspits, manholes, pier holes,laying of cable , fixing of pole etc. and getting out in soft soil complete all as specified and directed.

Returning, filling in including spreading, leveling, water in and well ramming in layer n.exc.25 cm in soft/loose soil complete all as specified and directed.

Removing excavated soil to a distance not exceeding 50 metre and depositing where directed at a level , not exceeding 1.5 metre above the starting point complete all as specified and directed.

Removing excavated materials to a distance exc 50 m but not exc. 250 m and depositing where directed at a level n.exc. 1.5m above the starting point complete all as specified and directed.

Removing excavated material to a distance exc 250 mtrs but not exc 500Mtrs and depositing where directed at a level n.exc. 1.5m above the starting point complete all as specified and directed.

Removing excavated material (soil) exc. 1000 m but n.exc. 1500 m and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified and directed.

Removing excavated material exc. 1500 m but n exc. 5000 m and depositing where directed at a level n.exc. 1.5m above the starting point complete all as specified and directed.

Grubbing up trees exc 30cm and n. exc. 100cm trunk including cutting of trunk portion protruding over ground, digging out roots, filling holes and leveling off ground, stacking of serviceable material and removing of unserviceable material to a distance n exc. 50 m and clearing site complete all as specified and directed.

M & L brick work with fly ash old size bricks,straight or curved on plan exc 6 M mean radius built in Cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge.

M&L for Well burnt Sub class 'B', modular bricks laid dry, flat, over the cable abutting each other, length of brick equal to width of brick, complete all as specified and directed.

M&L rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces finished the surfaces even and smooth without using extra cement and using water proofing compound as per manufacturer instruction complete all as specified and directed

M&L Rendering 15mm thick on other than fair faces of brick work or concrete surfaces In CM 1:4 finished even & smooth without using extra cement complete all as specified and directed

M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces In CM 1:4 finished even & smooth without using extra cement complete all as specified and directed

M & L for Cement concrete 1:2:4 type B1 (using 20 mm graded broken stone aggregate.) as in benching and coping including necessary moulds and form works and finished exposed surfaces and channels using extra cement complete all as specified and directed

M&L for cement concrete 1:4:8 type D2 (using 40 mm graded stone aggreate) as in foundation filling and mass concrete complete all as specified and directed.

M &L for 150 mm thick cement concrete1:4:8 type D2 (using 40 mm graded broken stone aggregate) as in sub base complete all as specified and directed

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M & L 60 mm thick,M-35 Grade Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006, with grey cement and pigment etc.complete all as specified and directed.

M & L for Cement concrete 1:3:6 type C2 (using 40 mm graded broken stone aggregate ) as in foundation of manholes including necessary form work complete all as specified and directed

M & L for Cement concrete 1:3:6 type C-2 (40 m graded broken stone aggregate ) as bed to drain pipe including packing undue and completely surrounding pipes with concrete for 150 mm bore pipes after they are laid and tested complete all as specified and directed

M & L for DWC HDPE (Double wall corrugated High Density poly ethylene) pipe for 150 bore dia pipe BSL-16098 (Part-2) 2013 laid & jointed complete with collars, laid and jointed on concrete bed complete including testing.complete all as specified and directed. Note :- Excavation and earth work and concrete bed shall be measured and paid for separately.

Supply only integral water proofing compound.

M & L for Pre cast reinforced cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in cover slab of man holes including necessary form work and set in CM 1:4 complete all as specified and directed.

M&LMoorum/red bajri filling in pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement incl forms, moulds mitered/stooped ends etc.complete all as specified and directed.

Cutting into existing manholes 150mm dia bore for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed.

M&L for cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in surface channels, drains complete all as specified and directed. Note:forming fair finished channel shall be measured and paid for separately.

Extra for forming fair finished drain or channel 40cm inner girth in cement concrete using extra cement incl forms, moulds,mitred/stopped ends etc complete all as specified and directed.

Demolition of Brickwork quoins, arches, pillars etc but excluding ashlar facings, dressed all store work and precast concrete articles built in cement mortar complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not other wise specifically provided for complete all as specified and as directed.

M&L for two coat of cement base paint on new surface of external walls incl preparation complete all as specified and directed by Engr-in-Charge.

Internal Electrification M & L for point wiring for light/fan controlled by one switch with 1.5 sqmm single core 1100v grade FRLSH PVC insulated unsheathed multistranded copper conductor with and including PVC concealed conduit of medium grade with all fittings including galvanized pressed steel sheet (1.0mm thick) sunk modular box with suitable module cover plate for modular switches, sockets, fan regulators etc. including 1.5 sqmm single core 1100v grade FRLSH PVC insulated unsheathed multistranded copper conductor as earth continuity conductor connected to common earth dolly and including concealing of conduits in walls / floors / ceilings etc. and making good disturbed surface to matching with the surrounding surfaces all as specified and as directed . Note: colour coding of wiring is to be maintained as per standard colour code .

M & L for point wiring for one 5 Amps independent socket point controlled by one switch with 1.5 sqmm single core 1100v grade FRLSH PVC insulated unsheathed multistranded copper conductor with and including PVC concealed conduit of medium grade with all fittings including galvanized pressed steel sheet (1.0mm thick) sunk modular box with suitable module cover plate for modular switches, sockets etc. including 1.5 sqmm single core 1100v grade FRLSH PVC insulated unsheathed multistranded copper conductor as earth continuity conductor connected to common earth dolly and including concealing of conduits in walls / floors / ceilings etc. and making good disturbed surface to matching with the surrounding surfaces all as specified and as directed . Note: colour coding of wiring is to be maintained as per standard colour code .

M & L for point wiring for one 5 Amps socket point in the same board with other switches, controlled by one switch with 1.5 sqmm single core 1100v grade FRLSH PVC insulated unsheathed multistranded copper conductor with and including PVC concealed conduit of medium grade with all fittings including galvanized pressed steel sheet (1.0mm thick) sunk modular box with suitable module cover plate for modular switches, sockets etc. including 1.5 sqmm single core 1100v grade FRLSH PVC insulated unsheathed multistranded copper conductor as earth continuity conductor connected to common earth dolly and including concealing of conduits in walls / floors / ceilings etc. and making good disturbed surface to matching with the surrounding surfaces all as specified and as directed . Note: colour coding of wiring is to be maintained as per standard colour code .

S&F Modular switch 1 way 6A, 1 module complete all as specified and directed.

S & F Modular Sockets 6A - 2/3 pin combined 2 module complete all as specified and directed.

S & F Modular electronic fan regulator Stepped type flush 120 watts 2 module complete all as specified and directed.

S&F Ceiling Rose , 3 Terminal, polycarbonate insulated body complete all as specified and directed.

M & L for point wiring for one 15 Amps independent socket point controlled by one switch with 2.5 sqmm single core 1100v grade FRLSH PVC insulated unsheathed multistranded copper conductor with and including PVC concealed conduit of medium grade with all fittings including galvanized pressed steel sheet (1.0mm thick) sunk modular box with suitable module cover plate for modular switches, sockets etc. including 2.5 sqmm single core 1100v grade FRLSH PVC insulated unsheathed multistranded copper conductor as earth continuity conductor connected to common earth dolly and including concealing of conduits in walls / floors / ceilings etc. and making good disturbed surface to matching with the surrounding surfaces all as specified and as directed . Note: colour coding of wiring is to be maintained as per standard colour code .

S&F Modular Switch 1 way 15 / 16 Amps 2 module complete all as specified and directed.

S & F Modular Socket 6 Amp /16Amp 3 / 6 pin combined 2 module complete all as specified and directed.

S & F Wall/surface mounted type LED light fitting batten type complete with LED 1x 20 watt (4 feet long), extruded aluminium body with heat sink provided for efficient heat dissipation and integrate electronic drive complete with all accessories internally pre-wired and including connecting up with 3 core twisted flexible copper conductor cable complete all as specified and as directed. Make : Philips (Cat No : BN 021C LED 20S PSU CW GR S2) Havells (Cat No : ENDURALINEARNEOBS20WLED830SPCWH) Crompton (Cat No : LCCLB24-CDL) Bajaj (Cat No : BCLAB 20W)

S & F Wall / surface mounted type LED light fitting batten type complete with LED lamp 9 - 10 watt (2 feet long), poly carbonate body and integrate electronic drive complete with all accessories internally pre-wired and including connecting up with twine core twisted flexible copper conductor cable complete all as specified and as directed. Make :- Crompton (Cat No : CCS-102-10-40-SL-DP-NWH) Havells (Cat No : LUMILINEBS10WLED865SPCWH) Bajaj (Cat No : BCLSB 10 NW))

Supply and fixing Decorative type LED Wall bracket light fitting having Chromium Plated steel body , frosted glass defuser, suitable for 7-10 watt LED lamps complete all as specified and directed. Make : PHILIPS (Cat No. 581851 Regalia) Havells (Cat No : LHFOAJE1TN1IO60) LUKAR (Cat No :LWL112-1)

S&F LED Street Light Fittings having Ingress Protection class IP-65 , suitable for road lighting luminaire with high power LED and maintenance free system for capacity 20-25 W complete with 32 mm bore light grade GI pipe bracket (1.5m long) duly bent to shape including M.S. Flat (25mmx5mm) clamps, nuts, bolts, washers etc. all as specified and as directed. Make : Philips (Cat Part No : BRP042PLED25CWSLES1PSUGRP4201) Havells (Cat No. : ENDURASUNDOWNSL25WLED765PASYBOPCIHD) Crompton (Cat No: TRP-400-20-57-SL-LM-NSR) Bajaj (Cat No : BCLST 20W LED I V2)

S&F LED Street Light Fittings having Ingress Protection class IP-65 , suitable for road lighting luminaire with high power LED and maintenance free system for capacity 45-48 W complete with 32 mm bore light grade GI pipe bracket (1.5m long) duly bent to shape including M.S. Flat (25mmx5mm) clamps, nuts, bolts, washers etc. all as specified and as directed. Make : Philips (Cat Part No : BRP052LED045CWSLMRFGS1PSUGR) Havells (Cat No.: ENDURACITYLITEPLAT+SL48WLED757PASYBOPC) Crompton (Cat No: TRP-409-45-57-SL-NS-GL-NSG) Bajaj (Cat No : BRTFG 45W LED I)

S&F Ceiling Fan complete with blades, down rods,and accessories suitable for 230 Volt 50 Hz AC supply, 1200mm sweep, Minimum air delivery 210 CFMwith service value 6.00 BEE 5 star rated with BLDC Motor all as specified and as directed. Make : CROMPTON / ATOMBERG / ORIENT / HAVELLS

supply and fixing air ventilating fan 230/250 mm sweep PVC body, AC, single phase, 230 volts, 1200 RPM complete with louvers shutters and including PVC insulated three core 1.5 sqmm copper cable from ceiling rose to exhaust fan complete including cutting the square / round hole of required size in wall, finishing the same for distrubed surfaces and all as specified and directed.. Make :- Usha (Model : Aeroclean) Orient (Model : HD EX Fan ) Havells (Model : Ventilair DS) Standard (Model : Refresh Air SPS or equivalant

supply and fixing air ventilating fan 300 mm sweep Metallic body, AC, single phase, 230 volts, complete with louvers shutters and including PVC insulated three core 1.5 sqmm copper cable from ceiling rose to exhaust fan complete including cutting the square / round hole of required size in wall, finishing the same for distrubed surfaces and all as specified and directed. Make :- Usha (Model : Aeroclean) Orient (Model : HD EX Fan ) Havells (Model : Ventilair DS) Standard (Model : Refresh Air SPS)

S&F flush mounting factory made TPN DBs Double door IP-43 protection, with Metal door with neutral bar,Earth Bar and fully insulated bus bar 4 way, all as specified and directed. Make : LEGRAND / L&T / ABB / SCHNEIDER

S&F flush mounting factory made SPN DBs Double door IP-43 protection, with Metal door with neutral bar,Earth Bar and fully insulated bus bar 8 way, all as specified and directed. Make : LEGRAND / L&T / ABB / SCHNEIDER

Supply and fix TPN MCB, 415 volts, 32 amps breaking capacity 10 KA 'B' series complete all as specified and directed. Make : LEGRAND / L&T / ABB / SCHNEIDER

Supply and fix SPN MCB, 240 volts, 32 amps breaking capacity 10 KA 'B' series complete all as specified and directed. Make : LEGRAND / L&T / ABB / SCHNEIDER

Supply and fix MCB single pole 240 volts, 6 to 32 amps, 50HZ, 10 KA. , ‘B’ series all as specified and directed. Make : LEGRAND / L&T / ABB / SCHNEIDER

S&F PVC Blanking plate to cover blank slots in MCB DBs suitable for SPN / TPN DBs complete all as specified and as directed. Make : LEGRAND / L&T / ABB / SCHNEIDER

M & L for submain wiring with 4 runs of single core 1100 v grade FRLSH PVC insulated flexible copper conductor cable of size 10 sqmm and 1 run of single core PVC insulated FRLSH flexible copper conductor cable green colour of size 10 Sqmm as earth lead in & including concealed PVC conduit medium grade of dia not less than 32 mm including concealing the conduits in walls / ceilings / floors and making good the disturbed wall surfaces to match with adjoining surfaces. (To be used from Grounf Floor Panel Board to TPN DBs at each Floor)

M & L for submain wiring with 2 runs of single core 1100 v grade FRLSH PVC insulated flexible copper conductor cable of size 6 sqmm and 1 run of single core PVC insulated FRLSH flexible copper conductor cable green colour of size 6 Sqmm as earth lead in & including concealed PVC conduit medium grade of dia not less than 25mm including concealing the conduits in walls / ceilings / floors and making good the disturbed wall surfaces to match with adjoining surfaces. (To be used fromTPN DB to SPN DBs at each floor)

M & L for submain wiring with 2 runs of single core 1100 v grade FRLSH PVC insulated flexible copper conductor cable of size 1.5 sqmm and 1 run of single core PVC insulated FRLSH flexible copper conductor cable green colour of size 1.5 Sqmm as earth lead in & including concealed PVC conduit medium grade of dia not less than 20mm including concealing the conduits in walls / ceilings / floors and making good the disturbed wall surfaces to match with adjoining surfaces. (To be used for Centralized control of Bldg security lights through Time Switch)

Supply ,installation,testing & commissioning of indoor type, wall mounted (Fixed with anchor bolts & nuts) MCB cabinet of overall dimension 800mm (W) x 1300mm (H) x 200mm (D) made out of 1.60 mm thick CRCA MS Sheet with front door having cutout to operate MCCB, MCB, Timer Switch etc.and other door shall be opeque. All doors should have gasket and locking arrangement to meet ingress protection level IP-20.The cabinet shall be painted both internally and externally with powder coated paint (RAL 7032 : SIEMENS GREY) after necessary surface treatment. The cabinet shall be comprising of following accessories :- a) Four pole MCCB, 80 Amps with breaking capacity 16 KA having adjustable thermal and fixed magnetic release and spreader link at both incoming and outgoing side and Door mounted rotary handle.- 01 No. (Make : Legrand / Schneider / L&T / ABB) b) Aluminium Bus Bar of size 25mm x 4mm duly mounted on FRP / DMC insulators and necessary drilling for 1 incoming & minimum 6 outgoing connections and duly covered with heat shrinkable PVC sleeve of standard colour code - 4 Nos. c) MCB TPN 40 Amps, 10 KA - 4 Nos ( For TPN DBs of 3 Floors+Electrical backup for Solar water heater-01 Nos) d) MCB SPN 06 Amps, 10 KA - 1 No ( For Bldg Security Lights) e) 2 Pole modular type DIN rail mounted mini contactor, 230 V AC, 25 Amps - 01 No (Make Legrand / Schneider / L&T) f) LED indicating Lamps, 22mm with 3 Amps SP MCB-03 Nos.

M&L for earthing complete with galvanised steel plate electrode 600mm x 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25 Mts deep below ground level with top edge of the plate not less than 1.50 Mtrs below ground level connected to glavanised iron strip 32mm x 6mm by means of bolts, nuts check nuts and washers of galvanised iron or steel connected to earthing test point all as specified incl 15 mm GI tubing medium grade and necessary fitting for protection of GI wire incl laying of charcoal dust and common salt in alternate layer, PCC Pit (1:3:6) type C-1 using 20 mm graded stone aggregate, RCC cover 40mm thick (1:2:4) type B-0 using 12.5mm graded stone aggregate reinforced with 6 mm dia round bar @ 75mm C/C both ways with MS handle 8mm dia, plastering 15mm thick CM (1:6) externally upto 150mm below ground level , GI funnel with 20mm dia medium grade GI pipe for watering and wire mesh incl excavation and earth work and disposal of surplus soil complete all as specified and shown on electrical plate No 3 of SSR Part (2009) and connected to earth test point incl testing complete including taking out old unserviceable earthing system all as specified an directed.

External Electrification S&F light grade galvanised tubes 50 mm bore, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed

M&L for Dry sand cushioning for protection of under ground cables (8cm before laying the cable and 15cm after laying the cable in trenches) complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 Sqmm 3½ core complete all as specified and as directed

INTERNAL WATER SUPPLY S & F steel water tubing medium grade, galvanised with all fittings of 15 mm bore and fixed complete to wall and ceiling or laid in floors complete all as specified and as directed.

S & F steel water tubing medium grade, galvanised with all fittings of 20 mm bore and fixed complete to wall and ceiling or laid in floors complete all as specified and as directed.

S&F vitreous china wash down water closet pedestal pan white excluding flushing cistern and flush pipes complete all as specified and as directed . Make: Cera/Parryware (Slimline)/Hindware

S&F for plastic water closet seat cover colour/ white, closed pattern with flat bottom and MS CP or aluminised hinging device as in repair of make Cera/Parryware/Hindware.

S&F health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F PVC flushing cistern push button / handle type of 10 ltr capacity , coloured complete with all fitting fixed to with WC including PVC flush pipes ,brackets etc complete all as specified and directed. Make : Cera/Parryware (Slimline)/Hindware.

S&F vitreous china wash hand basin white size 550x400 mm including bracket but excluding taps ,waste pipes , chain and plug etc complete all as specified and directed. Make : Cera/Parryware (Slimline)/Hindware.

S&F Chromium plated Fancy type Bib Taps 15mm, made of cast copper alloy with crutch or butterfly handle , screwed down suitable for iron pipe / brass insert of PPR pipe complete with teflon tape etc all as specified and as directed.. Make : Cera/Jaquar/Jainko/Essco

S&F Chromium plated Fancy type Stop valve/ angle valves 15mm bore, all as specified. Make : Cera/Jaquar/Jainko/Essco

S & F 15 mm bore brass chromium plated stop valve (concealed type) with Wall Flange complete all as specified and directed. Make : Cera/Jaquar/Jainko/Essco

S&F 15 mm dia Pillar taps fancy type chromium plated, screwed for iron pipe complete all as specified. Make : Cera/Jaquar/Jainko/Essco

S&F PVC waste pipe 32 mm dia for WHB, 800 mm length complete all as specified and directed. Make :Prayag Cat No 327 or equivalent in Polytuf .

S&F glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified.

S&F vitreous china urinal, full stall type, white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including CP urinal spreader, coupling, 60mm long brass screws, pointing around urinal back in cement, flush pipe, grating and union for discharge pipe (exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed Make : Cera/Parryware/Hindware.

S&F for swivel shower of PTMT any colour for fixing with 15mm pipe including shower arm 15mm size, 195mm long with bend of 45 degree with flange of PTMT any colour complete all as specified and directed.

S&F PVC connection 450mm long of PTMT 15mm bore complete all as specified and directed. Make : Cera/Essco/Prayag.

S&F brass chromium plated grating of size 102 mm dia with waste hole of cat No FT-04 of Make-Prayag or equivalent in Cera/Essco.

S&F brass chromium plated tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified.

S&F 100 mm bore cast iron (sand cast) soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls complete all as specified and directed.

S&F 100 mm dia CI branch pieces complete all as specified and directed.

S&F 100 mm dia CI bend complete all as specified and directed.

S&F 100 mm dia CI branch pieces with ovel access door complete all as specified and directed.

S&F 100 mm dia CI bend with ovel access door complete all as specified and directed.

S&F 75 mm bore cast iron (sand cast) soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls complete all as specified and directed.

S&F 75 mm dia CI branch pieces complete all as specified and directed.

S&F 75 mm dia CI bend complete complete all as specified and directed.

S&F 75 mm dia CI branch pieces with ovel access door complete all as specified and directed.

S&F 75 mm dia CI bend with ovel access door complete all as specified and directed.

S&F 100 mm outlet cast iron floor trap trap with grating including jointing to waste pipes in cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate ,complete all as specified and directed.

S&F 100 mm outlet cast iron nahani trap with grating including jointing to waste pipes in cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate complete all as specified and directed.

External water supply M&L for making connection of PP-R distribution branch with PP-R main of size 75mm by providing and fixing Tee including cutting and making fusion joint etc complete all as specified and directed.

Supply and lay 3 layer (inner antimicrobial outer UV stablized ) ISI markrd. IS- 15801, PP-R Pipes of outer dia size 50 mm SDR (PN-16) and PP-R plain fitting in trenches/walls/ celings or laying in floors including necessar pipe fittings, and jointed with fusion welding complete of size outer dia 50 mm including all fittings complete all as specified and directed. Make : SFMC / PRINCE / SNMC

Supply and lay 3 layer (inner antimicrobial outer UV stablized ) ISI markrd. IS- 15801, PP-R Pipes of outer dia size 32 mm SDR (PN-10) and PP-R plain fitting in trenches/walls/ celings or laying in floors including necessar pipe fittings, and jointed with fusion welding complete of size outer dia 32 mm including all fittings complete all as specified and directed. Make : SFMC / PRINCE / SNMC

S&F PP-R Gate Valves (Brass insert) of 50 mm bore complete all as specified and directed. Make : SFMC / PRINCE / SNMC

S&F PP-R Gate Valves (Brass insert) of 32 mm bore complete all as specified and directed. Make : SFMC / PRINCE / SNMC

Material and labour for construction of masonary valve pit chamber of size 1000x1000x900mm internally with burnt brick (Sub class "B") full brick thick brick work in cement mortor (1:6), 10 mm thick plastering in CM (1:4) internally and externally upto 150mm below the ground level, 150mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregated) as in foundation bed with 150mm all round ofset from outer side of brick work, 3 mm thick MS sheet cover with locking arrangement hinged with 50 x 50 x 6 mm angle iron frame embeded in PCC (1:3:6) type C-1 (using 20mm graded stone aggregated) as coping etc including painting with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on steel surfaces including necessary earth work in soft/loose soil and removing excavated soil to a specified place not exceeding 50 mtr from the valve pit complete all as specified and as directed.

S&F Rotational moulded triple layered polyethylene water storage tanks of Capacity as per requirement (Minimum of 500 Ltrs)(cylindrical vertical with closed top) hoisted and fixed in position including all necessesary pipe fittings complete all as specified in SSR Part I.

S & F Ball valves 25mm high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball (Minimum weight 25mm-455gms)screwed for iron pipe and fixed. complete all as specified and as directed. Make : PRAYAG / POLYTUF / LIPKA

Refrigeration, Water Cooler & Hot Water Supply Supply and fix Inverter type refrigerator, operated by CFC free refrigerant, Single door, single phase electric driven (energy efficiency level minimum BEE 4 star rated ) of capacity 250 Ltrs (or nearest higher size)complete all as specified and as directed Make : SAMSUNG / LG / WHIRLPOOL / GODREJ

Supply and fix Inverter type refrigerator, operated by CFC free refrigerant, Single door, single phase electric driven (energy efficiency level minimum BEE 5 star rated ) of capacity 170 Ltrs (or nearest higher size) complete all as specified and as directed Make : SAMSUNG / LG / WHIRLPOOL / GODREJ

Supply, installation, testing and commissionning of Storage type Water Cooler having fully Stainless Steel body, electric driven, suitable for 230 Volt AC single phase supply and having storage capacity 40 Ltr and cooling capacity 40 Ltr / hour complete with push tap, float valve, Plug Top etc all as specified and as directed. Make : VOLTAS / BLUESTAR / USHA

Supply, installation,testing and commissioning of solar water heater system of capacity 300 LPD indirect transfer of heat exchanger type comprising of flat plate collector, electrical heating back up of 3.0 KW, single phase with thermostat control, hot water tank insulated with 50mm thick PUF of density 48kg/CuM, the insulation shall be injecteted between inner tank and outer shell by injection moulding system and shall be provided with water proof joints to prevent any seepage of water/water vapour including necessary M.S. stand to mount the solar panel duly inclined to the sun rays complete all as specified and as directed Make : SOLCHROME / SUNTEK / ANU SOLAR OR Any other MNRE approved make

M&L for Frame work made of M.S. angle, M.S. flat, M.S. gusset plate cut to shape including drilling,bending and welding as necessary for fabrication of staging for makeup water tank of solar water heater or any other purposes including one coat of red oxide metal primer and two coats of black synthetic enamel paint duly fixed on the RCC roof with foundation bolt complete all as specified and as directed.

S&F Rotational moulded multilayered polyethylene water storage tanks of Capacity 250 Ltrs (cylindrical vertical with closed top) hoisted and fixed in position including all necessesary pipe fittings all as specified in SSR Part I (For makeup water tank of Solar Water Heater) Make : SINTEX / POLYCON / PATTON

Supply and lay 3 layer (inner antimicrobial outer UV stablized ) ISI markrd. IS- 15801, PP-R Pipes of outer dia size 32 mm SDR 7.4 (PN-16) and PP-R plain fitting in trenches/walls/ celings or laying in floors including necessar pipe fittings, and jointed with fusion welding complete of size outer dia 32 mm including all fittings Make : SFMC / PRINCE / SNMC

Supply and lay 3 layer (inner antimicrobial outer UV stablized ) ISI markrd. IS- 15801, PP-R Pipes of outer dia size 32 mm SDR 7.4 (PN-16) and PP-R plain fitting in trenches/walls/ celings or laying in floors including necessar pipe fittings, and jointed with fusion welding complete of size outer dia 25 mm including all fittings Make : SFMC / PRINCE / SNMC

Supply and lay 3 layer (inner antimicrobial outer UV stablized ) ISI markrd. IS- 15801, PP-R Pipes of outer dia size 32 mm SDR 7.4 (PN-16) and PP-R plain fitting in trenches/walls/ celings or laying in floors including necessar pipe fittings, and jointed with fusion welding complete of size outer dia 20 mm including all fittings complete all as specified and as directed Make : SFMC / PRINCE / SNMC

S&F PP-R Gate Valves (Brass insert) of 32 mm bore for pipe of SDR 7.4 (PN 16) complete all as specified and as directed Make : SFMC / PRINCE / SNMC

S&F PP-R Gate Valves (Brass insert) of 25 mm bore complete all as specified and as directed. Make : SFMC / PRINCE / SNMC

S&F PP-R Gate Valves (Brass insert) of 20 mm bore complete all as specified and as directed Make : SFMC / PRINCE / SNMC

S&F Chromium plated Fancy type Bib Taps 15mm, half turn operation, made of cast copper alloy with crutch or butterfly handle , screwed down suitable for iron pipe / brass insert of PPR pipe complete with teflon tape etc all as specified and as directed. Make : CERA/JAQUAR/ ESSCO / PARRYWARE

BUILDING PORTION Light gauge Steel Frame Structure :- Designing, Providing, Installing And Fixing factory finished custom designed cold form Light Gauge Steel Framed super structure comprising of steel wall panel, trusses, purlins etc manufactured out of 0.75 mm to 2.00 mm thick steel sheet as per design requirements. The steel JJsheet shall be galvanized (AZ-150 GSM aluminium zinc alloy coated steel having yield strength 300- 550 MPA) conforming to AISI specifications and IBC 2009 for cold formed steel framing and construction and also as per IS: 875- 1987 (PART-I; dead load , PART-II; imposed load, PART-III; wind load , PART-IV; snow load, and PART-V; special load & load combinations), IS 800- 1984 (code of practice for general construction in steel) and IS: 801- 1975 (code of practice for use of cold formed light gauge steel structural members in general building construction). the wind load shall be as per provisions of IS 875 (PART -III) LGSFS frame shall be designed as per IS: 801 using commercially available software such as frame CAD PRO-11.7, STAAD PRO-V8I, ARCHITEK V2.5.16, REVIT ARCHITECTURE 2011 or equivalent. the framing section shall be cold form ctype having minimum web depth 89 mm x 39mm flange x 11mm lip in required length as per structural design requirement duly punched with dimple/slot at required locations as per approved drawings. The slots will be along centre line of webs and shall be spaced minimum 250mm away from both ends of the member. The frame can be supplied in panelised or knock down condition in specific dimensions and fastened with screws extending through the steel beyond by minimum of three exposed threads. All self-drilling tapping 168 screws for joining the members shall have a type ii coating in accordance with ASTM B633(13) or equivalent corrosion protection of gauge 10 & 12, TPI 16 & 8 of length 20mm. The frames shall be fixed to RCC SLAB or tie beam over neoprene rubber using self-expanding carbon steel anchor bolt of DIA as per approved drawings, design subject to minimum 12mm diameter and 121mm length conforming to AISI 304 and 316 at 500mm c/c with minimum embedment of 100mm in RCC and located not more than 300mm from corners or termination of bottom tracks complete in all respects. hot rolled steel sections as per design & conforming to is 800 can be used for buildings higher than G+2

Note:- (i) Structural design and drg of super structure and foundation shall be developed based on line plan drg No CEKZ/SK/57/2022 Sheet No 1/1 dt 21 Nov 2022 and soil testing report suppplied by department (ii) the design shall be vetted from any IIT and get approved from Accepting Officer. (iii) The item of superstructure and foundation shall be measured and paid under respective item of the schedule. (iv) Cost of design, preparation of drg and vetting from IIT is included in the quoted rate.

Supply and fixing of HR Steel Structure of YST 210/310 as per Structural Drawing submitted with the customer painted with one coat Primer and Two coats of Epoxy Paint complete all as specified and as directed.

Supply and fixing of Screw, Fastners, Bolts, Connectors and all accessories complete all as specified and as directed.

Supply and fixing of Internal Wall insulation with Rockwool Slab as per IS 8183, Size 1.00 x 0.50 Mtr, 75mm thick & Density 48 Kgs/M3 complete all as specified and as directed.

Supply and fixing of troughed structural metal decking sheet for floor shall be 960 mm effective cover width and 978 supply width, with 50-51 mm deep ribs with pitch of 310-320 mm centre-to-centre, with embossment on ribs with stiffener in rib and pan for mechanical connection between the steel and concrete, with male and female side lap joint manufactured out of 345 material of thickness of 0.80 mm.complete all as specified and as directed.

Supply and fixing of Rockwool Sandwich Panel/Fiber glasswool panel 50mm having 0.5mm TCT PPGI Trapezodial Sheet on top and 0.5mm TCT PPGI Plain sheet at the bottom as in roof complete all as specified and as directed.

Supply and fixing of External Wall insulation to be done with Rockwool Slab as per IS 8183, Size 1.00 x 0.50 Mtr, 75mm thick & Density 64 Kgs/M3 complete all as specified and as directed.

S&F The Outer layer of the outer wall with Heavy Duty 9mm thick Fiber Cement Board. Fibre Cement Board will be conforming to IS:14862:2000, density >1450 kg/m3, Modulus of Rupture EMC –Minimum 18 Mpa or N/mm2, thermal conductivity 0.22 W/m.K .

Supply and fixing of Cement Fiber board’s 8mm thick on both sides of the wall. The inner side of Outer wall & inner wall to be fixed with 8mm thick Fiber Cement Board. Fibre Cement Board will be conforming to IS: 14862:2000, density >1200 kg/m3, Modulus of Rupture EMC –Minimum 10 Mpa or N/mm2, thermal conductivity 0.20 W/m.K .

S&F 12.5mm gypsum board to interna side of external wall and all internal wall for smooth finishing.

Providing and Fixing of external thermal insulation and composite system with first layer of self-extinguishing type Expanded Polystyrene (EPS) insulation boards of 50 mm thick ( max 1mx0.5m section), confirming to IS 4671:1984, having thermal conductivity of 0.034 w/make, (measured as per IS 3346- 1980), density of 20-24 kg/m³ measured as per IS 5688-1982, fire retardant property self-extinguishing type as per en 13501- 1, bonded with special polymer modified cementitious adhesive confirming to EOTA ETAG 004 (European Technical Approval) formulated to bond polystyrene insulation boards to typical mineral substrate (according to ETAG 004) and polypropylene mechanical fasteners with plastic pin confirming to eota etag 014 (European Technical Approval) having dia 10mm & l=200mm on finished level wall and the junction between two adjacent EPS boards to be sealed with low expansion moisture cure polyurethane foam. Second layer consists of fiberglass mesh covered with alkali-resistant coating, mass per unit area > 145 gm/m2, mesh size: 3.9x4.0 mm ±10% embedded in special polymer modified cementitious base coat with hydrophobes and the corners will be protected with corner-beads with alkali-resistant mesh wings at least 10 cm wide, mesh mass per unit area min 145 gm/m2. the surface will be levelled, finished, made smooth complete in all respect as per manufactures specification and as per directions of Engineer-In-Charge

S&F for Factory made single extruded WPC(Wood polymer composite) solid flush door shutter of 30mm size comprising of virgin PVC polymer of K value 58-60(Suspension grade), calcium carbonate & natural fibres and non-toxic additives fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum density of 650 Kg/cum, screw withdrawal strength of 1800 N(Face) & 900 N (Edge), minimum compressive strength of 50 N/Sqm, modules of elasticity 850 N/sqm & resistance to spread of flame of class A category with property of termite/borer proof , water/moisture proof & fire retardant & fixing with SS butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as specified and as directed.

S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening complete all as specified and directed.

S&F for Factory Made Solid PVC Moulded Door Shutter 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm plain colour PVC Sheet on back face, supplying & fixing in frame at site complete all as specified and directed.

S&F 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, complete all as specified and directed

S&F Aluminium anodised, barrel tower bolts of extruded section 200mm long complete all as specified and directed

S&F Extruded aluminium alloy handles, fabricated type, anodised 150mm long complete all as specified and directed

S&F 30mm thick 2nd class hardwood, Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) supplied and fitted to chowkats all as specified and directed.

S&F for Powder coated aluminium sliding windows for (three tier) withwith shutter styles 40mm X 20 mm sheet thickness 1.5 mm Two shutter glass and one shutter of wiremess consisting of Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples, frame (chowkat) of window shall 100 mm X 44 mm X 1.5 mm thick section with or without rebate 5 mm thick tinted glass fixed with aluminum beads locking arrangements with each shutter complete all as specified and as directed .

S&F Powder Coated Aluminium Window profile with frosted glass and requisite fittings

S&F for aluminium anodised Deco grill 7.5 mm size DG-102, fixed to F/H frames, 1.5mm th, bar size 6.2mm and 7.5mm thick in required sizescomplete all as specified and as directed.

Supply & fixing Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with SS wire staples complete,all as specified and directed. complete in all respect as specified.

Material & Labour for applying external walls in new surfaces with Acrylic Smooth exterior paint of required shade (Two coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) over and including 3mm thick wall care putty complete in all respect as specified and directed. Note:- Performance guarantee alongwith security deposit amount as specified in perticulars specification for Five (05) years shall be submitted by the contractor after physical completion of work.

Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces over and including 3mm thick wall care putty complete in all respect as specified and directed by the Engr-in-Charge

M&L anodised aluminium snap grid with powder coated frame work for false ceiling of size 605x605 mm including 6mm dia GI (upto 1200mm length) hangers adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3 mm size 60 mm long and expansion hold fasteners 12.5mm dia 40 mm long complete all as specified.

M&L 6mm non asbestos fibre cement building boards flat, fixed or laid/inserted to aluminium frame work with screws complete all as specifed.

Supply only water proofing compound, complete all as specified and as directed. Make: Dr. Fixit/Sika/Fosroc Chemical or equivalent

M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface for plinth protection complete all as specified.

M&L 75mm thick PCC (1:3:6) type C-2 (Using 40mm graded stone aggregate) as in plinth protection laid in panels, finish the top surfaces even and smooth without using extra cement complete all as specified and directed

M&L Screed bed or bedding layer 15 mm thick in cement mortar (1:6) for laying floor finishes complete in all respect as specified.

M&L Coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete in all respect as specified.. (Note:- Screed bed shall be measured and paid Seperately under respective items of Sch)

M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete in all respect as specified.. (Note:- Screed bed shall be measured and paid Seperately under respective items of Sch)

M&L for bedding layer of mortar 10 mm thick in CM 1:3 for laying wall/dado finishes, complete all as specified and directed. complete in all respect as specified.

M&L Glazed ceramic coloured wall tiles of size 450X300X7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles . complete in all respect as specified.. (Note:- Screed bed shall be measured and paid Seperately under respective items of Sch)

Reinforced cement concrete M-25 grade (design mix ) as in Roof/floor slab and mass concrete complete all as specified and directed.

Use and waste of steel formwork to sides of concrete foundation, footing ,column,raft, raft foundation, pillars, posts,plinth beam stanchions for rough finished surface complete all as specified and as directed.

Reinforced cement concrete M-25 grade (design mix ) in foundations, including rafts,footings,foundation beams, plinth beams, bases for columns, etc basement slabs,under-reamed piles and mass concrete complete all as specified and directed.

S&F TMT bars 10mm dia and over Fe 550/550D , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

All as per Sch 'A' item No 154 here in above but 5 mm dia and over upto and incl 10 mm dia in stirrus, spaces, and binders complete all as specified and as directed.

S&F for Factory made single extruded WPC (Wood polymer composite) solid door Frames of size 45 x 70mm comprising of virgin PVC polymer of K value 58-60(Suspension grade), calcium carbonate & natural fibres and non-toxic additives fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum compressive strength of 58 N/Sqm and resistance to spread of flame of class A category with property of being termite/ borer proof, water/ moisture proof & fire retardant & fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete all as specified and as directed..

S&F for Factory made single extruded WPC(Wood polymer composite) wire mesh door shutter of 30mm size comprising of virgin PVC polymer of K value 58-60(Suspension grade), calcium carbonate & natural fibres and non-toxic additives fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum density of 650 Kg/cum, screw withdrawal strength of 1800 N(Face) & 900 N (Edge), minimum compressive strength of 50 N/Sqm, modules of elasticity 850 N/sqm & resistance to spread of flame of class A category with property of termite/borer proof , water/moisture proof & fire retardant & fixing with SS butt hinges of required size with necessary full body threaded star headed counter sunk SS screws,complete all as specified and as directed.

Material and labour for Granite slab (of any type) 16 to 18 mm thick work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms over and including 15mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and as directed.

Supply and Fixing II nd class soft wood plain fillets, square, rectangular or triangular in section, wrought, secured with nails or brads, sectional area exc 3.00 sqcm. N.exc 6.00 sqcm complete all as specified and as directed.

Supply and Fixing for 18/19 mm thick prelaminated particle board, exterior grade, fixed with screw to timber frame work but prelaminated both sides with decorative choice laminations complete all as specified and as directed.

Supply and Fixing Hasp and stable 100 mm, aluminum anodized, wire type, stove enameled black including bolt to hinge plate and fixed with screw etc.

Supply and Fixing continuous (piano) hinges, mild steel, bright finish or electro galvanized width of flaps 40 mm (when open) complete all as specified and as directed.

Supply and Fixing for Stainless steel railing 1.0 Mtr hight comprising of 50mm dia main post at the interval of 2.0 Mtr c/c, top member 40mm Dia tubular section, 03 Nos horizontal runner of size 16mm Dia etc including necessary fittings and fixtures required to fix over staircase/ balcony etc complete all are specified and directed.

M&L for Green marble work 18 to 20mm thick ( table rubbed and polished ) in steps, jambs, pillers, window cills,cooking platform and like in cement mortor (1:4) including pointing with white cement (1:2) using marble dust with admixture pigment to match with marble shade complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and as directed.

S & F for 300 mm long aluminum alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast alluminium alloy complete all as specified and as directed.

S&F for stainless steel kitchen plate rack of size 4’x3’ etc complete all as specified and as directed.

S & F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

M & L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including Screed bed or bedding layer of mortar 15 mm thick cement mortar (1:6) for laying floor finishes rubbing and polishing complete all as specified and as directed.

M & L for machine cut kota stone skirting of 20-25mm thick over cement rendering laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including backing layer of mortar 10 mm thick cement mortar (1:4) for laying floor finishes rubbing and polishing complete all as specified and as directed.

Demolition of building: Demolition of cement concrete (un-reinforcement ) in ground floors and paving n.exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.

Demolition of Brickwork or stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and as directed.

Taking down chowkats or frames with shutters (W/O taking off shutters ) n. exc 1.5 sqm each and each removing to or from store

Taking down chowkats or frames with shutters (W/O taking off shutters ) exc 1.5 sqm but n exc 4sqm each and removing to or from store complete all as specified and as directed.

Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.

Taking up or down steel tubing 15MM and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed.

Taking up or down steel tubing 20MM and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified complete all as specified and as directed.

Dismantling of framed work timber scantlings 40 sq. cm and over in section, in any position complete all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Dismantling and taking down carefully sub-main wiring any size including wooden batten etc and making good the disturbed surfaces of wall/floor to match the existing wall/floor etc complete all as specified and directed.

Taking up or down steel tubing 40/50mm and including all fittings and connections, including cleaning for refixing or removal from site complete all as specified and as directed.

Taking up unserviceable XLPE cable of any size by opening from the existing DB/LT Panel complete all as specified and as directed.

Dismantling hose service brackets, any type complete all as specified and as directed.

Dismantling service wire of any size any type complete all as specified and as directed.

ADDAYA MAA CONSTRUCTION

LLOYD INSULATIONS INDIA LIMITED

NIPANI INFRA AND INDUSTRIES PRIVATE LIMITED

Supertech India Pvt. Ltd.