Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹98.8 LAdmitted-Finance | -0.55% | ₹98.8 L | L1 | Admitted-Finance |
| 2 | L2₹1.0 Cr+₹1.5 L (1.56%)Admitted-Finance | +1.00% | ₹1.0 Cr+₹1.5 L (1.56%) | L2 | Admitted-Finance |
Tender Value
₹99.3 L
EMD Value
₹2.0 L
Closing Date
29 Jun 2026, 12:00 pmClosed
Exe. Engineer Roads Division No 3 MC Chandigarh
Exe. Engineer Roads Division No 3 MC Chandigarh
UPGRADATION OF FLOORING AT FRONT SIDE AND BACK SIDE OF MARKET/SHOWROOMS SECTOR 22 B, CHANDIGARH.
2026_MCC_91924_6
MCC/2026/ROADS-III/04-06
Open Tender
Civil Works - Others
Percentage
180 days
Work
Please refer Tender documents.
8 documents required · 8 mandatory
₹3,000
₹2.0 L
23 Jul 2026
22 Jun 2026
29 Jun 2026
22 Jun 2026
29 Jun 2026
22 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Taking out existing kerbs stones of all types from footpath/ central verge, including removal of mortar etc. disposal of unserviceable material to the dumping ground for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer in Charge. (N.S.) | - | Rmt | - | - |
| 2 | Taking out existing channels stones of all types from footpath/ central verge, including removal of mortar etc. disposal of unserviceable material to the dumping ground for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer in Charge. (N.S.) | - | Rmt | - | - |
| 3 | Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. | 0.6 | Sqm | - | - |
| 4 | Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. (DSR 2.6.1) | - | Cum | - | - |
| 5 | Disposal moorum/building rubbish/malba/similar unservicable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved muncipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Enginner -in- charge. | - | Cum | - | - |
| 6 | Carriage of mechanical transport including loading, unloading Lead of 5 km at Dumping Ground complete in all respect to the entire satisfaction of the Engineer-In-Charge. (DSR 1.1.2) | - | Cum | - | - |
| 7 | Laying at or near ground level factory made old kerb stone made of plain cement concrete 1:2:4, in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured to calculate volume for payment). | - | Rmt | - | - |
| 8 | Providing and laying at or near ground level factory made kerb stone of size 2'x9'x4"made of plain cement concrete 1:2:4, in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured to calculate volume for payment). | - | Rmt | - | - |
| 9 | Laying at or near ground level factory made old channel made of plain cement concrete 1:2:4, in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished channel edging shall be measured to calculate volume for payment). | - | Rmt | - | - |
| 10 | Providing and laying at or near ground level factory made channel of size 2'x1'x3" or 1'x1'x3" made of plain cement concrete 1:2:4, in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished channel edging shall be measured to calculate volume for payment) (N.S.) | 1 | Rmt | - | - |
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 4.44 MB
BOQ_114475.xls
BOQ • 0.26 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .