Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.4 LAccepted-AOC FLAT NO 1004 BUILDING NO L 11 KEDAR HOUSING SOCIETY 10TH FLOOR SECTOR NO 21 TALOJA PHASE 2 PANVEL RAIGAD NAVI MUMBAI 410208 | NAVI MUMBAI | RAIGAD | MAHARASHTRA | 410208 | L1 | Accepted-AOC BEING L1 | |
| 2 | L2₹22.4 L+₹3.8 L (20.7%)Rejected-Finance | L2 | Rejected-Finance BEING NOT L1 | |
| 3 | L3₹27.8 L+₹9.3 L (49.9%)Rejected-Finance SR NO 331 2B PLOT NO 43 R H NO 02 BALDEWA RAO BUNGLOW NEWA NMC WATER TANK PATHARDI SHIVAR NASHIK 422 009 INDEX NO E 84CWE AF LOHEGAON PUNE | NASHIK | MAHARASHTRA | 422009 | L3 | Rejected-Finance BEING NOT L1 |
| Sl No | Description | Qty | Unit | M/s ASPIRE ENGINEERING ENTERPRISES L1 | Shree Sai Samarth Enterprises L3 | SONA LAKSHMI ASSOCIATE L2 |
|---|---|---|---|---|---|---|
| 1.00 | M&L for refixing exisiting of dislocated/ uprooted GI/Copper/Aluminum Strip any size along with insulator from wall/ celing/ roof or any other location as directed from any building/ panel/ hanger/ any type of structure any size and shape. Refixing should be done in proper order and alignement on existing insulator or replaced with new one if broken/ unserviceable complete all as directed by Engineer-in-Charge.
NOTE:
i) The quoted rate is deemed to be include the rate of necessary nuts & bolts used to refix the strip on insulator or the clamps along with nuts & bolts required to fix the GI pipe in vertical postion on wall / ceiling/ floor upto height of 25 meter etc complete.
ii) Porcelain/polycarbonate Insulator will be measured and paid seperatly under relevant items of this schedule.
(iii) (ii) Contractor shall arrange necessary T & P, Transpotation safety equipments like halemet, safety belt etc while working on height, rate shall be deemed to be included in quoted rate
(iv) Any casualty or injury sustained by the contractor’s workers during the working shall be sole responsibility of the contractor. No claim on this account shall be entertained by the department. | 900 | RM | 40 ₹36,000 | 2 ₹1,800 Lowest | 20 ₹18,000 |
| 2.00 | Supply and fixing in repair insulator porcelain/polycarbonate/wooden block with suitable fixing arrangement by means of nuts & bolts for roof earth continiuty conductor and down conductor duly insulated from wall surface/roof/Hanger of height 10 to 15 mtr of any type bldg/ hanger/ structure all as directed by Engineer- in- Charge.
Note :- Contractor shall arrange necessary T & P, Transpotation safety equipments like halemet, safety belt etc while working on height, rate shall be deemed to be included in quoted rate
(ii) Any casualty or injury sustained by the contractor’s workers during the working shall be sole responsibility of the contractor. No claim on this account shall be entertained by the department. | 300 | Each | 40 ₹12,000 | 10 ₹3,000 Lowest | 15 ₹4,500 |
| 3.00 | Material and labour for earthing complete with galvanized steel earth plate electrode of size 60cm x 60 cm x 6 mm thick buried directly in ground ( earth pit not less than 2.25 mtr deep below ground level) with top edge of earth plate not less than 1.5 mtr below ground level connected to galvanized iron strip 25 x 4 mm by means of of galvanized iron nuts & bolts or as directed at site by Engineer -in-Charge protected by GI Pipe 40 mm dia light grade and connected to test point and further connected to equipment, mcachinery, electrical panel or any other as directed by Engineer-in-Charge, which to be earthed, all as shown in electrical plate No 3 of SSR Part I including providion of concrete earth pit constructed in PCC 1:3:6 type C-1 as earth pit and PCC 1:2:4 type B-1 for cover slab with necessary reinforcement with handle for lifting also including provision of funnel with wiremesh with 20 mm GI pipe medium grade for watering, charcoal and salt in alternative layers of 15 cm thick all around the electrode , including necessary excavation and earth work , testing and commissioning complete all as directed at site.
Note (i) Earth test should be done by contractor at his own cost and if less than 6 Ohms result is not found at site, entire earthing should by contractor again without accruing any extra cost to the department. No claim whatsover on redoing the earthing shall be admissible by the department to the contractor. | 28 | Each JOB | 3,800 ₹1,06,400 | 3,500 ₹98,000 Lowest | 4,300 ₹1,20,400 |
| 4.00 | All as per Ser Item No 3 above but complete but by using galvanized iron strip 32 x 6 mm as earth continuity conductor complete all as directed by Engineer-in-Charge. | 25 | Each JOB | 4,200 ₹1,05,000 | 4,000 ₹1,00,000 Lowest | 4,500 ₹1,12,500 |
| 5.00 | All as per Ser Item No 3 above but complete but by using with copper earth plate electrode of size 60cm x 60 cm x 3.15 mm thick and copper strip 20 x 3 mm as earth continuity conductor complete all as directed by Engineer-in-Charge.
Note (i) Earth test should be done by contractor at his own cost and if less than 3 Ohms result is not found at site, entire earthing should by contractor again without accruing any extra cost to the department. No claim whatsover on redoing the earthing shall be admissible by the department to the contractor. | 28 | Each JOB | 12,000 ₹3,36,000 Lowest | 14,000 ₹3,92,000 | 14,300 ₹4,00,400 |
| 6.00 | All as per Ser Item No 3 above but complete but by using galvanized iron earth lead wire 4.0 mm dia as earth continuity conductor complete all as directed by Engineer-in-Charge.
Note (i) Earth test should be done by contractor at his own cost and if less than 8 Ohms result is not found at site, entire earthing should by contractor again without accruing any extra cost to the department. No claim whatsover on redoing the earthing shall be admissible by the department to the contractor. | 21 | Each JOB | 4,000 ₹84,000 | 3,500 ₹73,500 Lowest | 4,101 ₹86,121 |
| 7.00 | M&L for Maintenance free chemical earthing system complete with UL 467 approved pure copper earth rods 17 mm dia. 3000mm long electrode buried in ground to bore holes 100mm dia vertically to a depth not less than 3.00 Mtr deep below ground level with top edge earth electrode at a depth not less than 300 mm below normal ground level, provision of copper bus bar of size 100mmX25mmX5mm for inter connection with copper earth lead strip 25mmX3 mm braize with eath electrode, Eqpt and further connected to test point terminal block of size 200mmX50mmX6mm made of copper as directed, including 45 Kg (Minimum) NABL Lab Certified back fill chemical compound for filling bore holes with soil mixed, 1 years warranty on resistance value at less than 2 Ohm will be given by the contractor and 10% of amount in quoted item rate should retain with dept upto 1 years. Including excavation and earth work and earth neutral voltage less than 03 Volts of PCC chamber in PCC (1:3:6) typeC-1 (using 20mm graded stone aggregate) with Pit cover of 300mmX300mm made of Cast Iron complete all as specified and as directed by Engr-in-Charge.
Note :
(i) Excavation work should be done by manpower/mechanicaly only.
(ii) Earth test should be done by contractor at his own cost and if less than 2 Ohms result is not found at site, entire earthing should by contractor again without accruing any extra cost to the department. No claim whatsover on redoing the earthing shall be admissible by the department to the contractor.
(iii) The quoted rate shall deemed to be included the rate of boring mechanicaly/Manuly in any type of soil, provision of earth pit with cover, mineral filled compound (earth back filled material) 50 kg, removal of excavated material from site, test link for test point, necessary sadling and mounting of copper strip on walls etc
(iv) Copper strip complete will be measured and paid seperatly
(v) Workmanship shall be carried out in accordance with guide lines of OEM (installation and commissioning) and the certificate from concerned OEM to this effect shall be obtained and submitted to department.
(vi). Back-fill compund shall not be mixed with any soil while pouring in the bore hole.
(vii) The earthing material supplied shall be checked /inspected by Jef's/respective Make Engineer
(viii). Atleast One Jef Eco/respective Make Safe earthing installtion shall be carried out under supervision.
(x) Earthing value for an individual earth pit should be less than 2 ohms type of soil/strata/rock/other if any etc.., complete all as specified and as directed by the Engineer-in-charge. including provision of earth pit cover, test
link for test point, necessary saddling and mounting of strip complete all as directed.
(xi) Required result of earthing less than 02 Ohm. If desired Ohmic value is not achieved then additional gride required with its allied items shall be provided by contractor without any extra cost to Govt. No price adjustment shall be made complete all as specified and as directed by the Engr- in-charge. including provision of earth pit cover, test link for test point, necessary saddling and mounting of strip complete all as directed
Make: Ashlok, JEF ECO SAFE, SPA infrastructure's safe earthing electrode, Pune or JMV LPS Ltd, Delhi or equivalent as approved. | 26 | Each Job | 10,200 ₹2,65,200 Lowest | 24,000 ₹6,24,000 | 13,500 ₹3,51,000 |
| 8.00 | M & L for earth enhansing material/Backfill compound of A+ grade available in 25 Kg packaging bag (mineral filled compound) for lowering the resistivity of soil of existing earth pit against higher resistance.The backfill compound should strictly be a Activated carbon based conductive type which has the resistivity less than 0.12Ω mtr as per clause 14.5D of IEEE:80-2000 Standard. Tested as per IEC :62561-7 and the test certificate to be submitted .Shall not depend on the continous presence of water/moisture/salt to maintain its conductivty. Shall not decompose or leach out with time. Shall contain a corrosion inhibitor to prevent corrosion of copper. Should not contain hazrdous chemicals and necessary test certificate from reputed accredited laboratories shall be submitted.Should not get affected by drought and shall be stable between -10ᴼc to +50ᴼc temperatures. Shall be suitable for any kind of soil. Shall be supplied in sealed, moisture proof bags. These shall be marked with manufacturers name or trade nam, quantity, batch no & date of manufacture. Back-fill compound should be electronically conductive ( Like in metals) & should not depend on moisture for conduction. Back-fill compund should be environment friendly, should solidify when mixed with water and set like concrete and should not leach/diffuse into the ground, disconnecting or reconnecting strip with nuts & bolts complete all as directed by engineer in charge.Note Earth work & excavation rate shall be deemed to be included in quoted rate, copper plate will be cleaned by chemical/grinding machine, upto satisfactory level of Engineer-in-charge.Make:JEF ECOSAFE/JMV/KAPILNASH/JEF TECHNO SOLUTIONS | 15 | Bags | 1,200 ₹18,000 | 500 ₹7,500 Lowest | 550 ₹8,250 |
| 9.00 | Supply and fix Aluminium strip of size 25 X 3 mm as earth continuity conductor for roof and down conductors fixed/run on wall/celing/roof of any type of bulilding/hanger /structure with proper clamping or saddling duly supported on porecelene/polycarbonate/wooden block with suitable fixing arrangement of nuts & bolts or psses through wall by making hole or any other indicated situation complete all as directed according site condition by Enginer-in-Charge.
NOTE: i) The quoted rate does not include the rate for porecelene/ polycarbonate/wooden insulator, the same may be measured and paid seperately under the relevant items of this schedule. | 900 | RM | 120 ₹1,08,000 | 80 ₹72,000 Lowest | 90 ₹81,000 |
| 10.00 | S&F in repair green colour PVC Covered High Conductivity copper Tapes/Strip of size 25x3 mm Complete all as specified and directed. Note :- Joint of Strip will be done by Exothermic Welding or as per direction by Engr-in-Charge. | 800 | RM | 380 ₹3,04,000 Lowest | 950 ₹7,60,000 | 750 ₹6,00,000 |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
12 Jul 2025, 6:00 pmClosed
GE AF OJHAR
GE AFOJHAR
MAINT OF EARTHPITS,LIGHTENING ARRESTOR AND FIRE ALARM SYSTEM AT 25ED AF STN DEVLALI
2025_MES_705823_3
8302/E8
Open Tender
Electrical and Maintenance Works
Item Rate
335 days
DEOLALI
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE AF OJHAR
₹60,000
13 Oct 2025
24 Jun 2025
14 Jul 2025
25 Jun 2025
12 Jul 2025
28 Jun 2025
Amount
M&L for refixing exisiting of dislocated/ uprooted GI/Copper/Aluminum Strip any size along with insulator from wall/ celing/ roof or any other location as directed from any building/ panel/ hanger/ any type of structure any size and shape. Refixing should be done in proper order and alignement on existing insulator or replaced with new one if broken/ unserviceable complete all as directed by Engineer-in-Charge. NOTE: i) The quoted rate is deemed to be include the rate of necessary nuts & bolts used to refix the strip on insulator or the clamps along with nuts & bolts required to fix the GI pipe in vertical postion on wall / ceiling/ floor upto height of 25 meter etc complete. ii) Porcelain/polycarbonate Insulator will be measured and paid seperatly under relevant items of this schedule. (iii) (ii) Contractor shall arrange necessary T & P, Transpotation safety equipments like halemet, safety belt etc while working on height, rate shall be deemed to be included in quoted rate (iv) Any casualty or injury sustained by the contractor’s workers during the working shall be sole responsibility of the contractor. No claim on this account shall be entertained by the department.
Supply and fixing in repair insulator porcelain/polycarbonate/wooden block with suitable fixing arrangement by means of nuts & bolts for roof earth continiuty conductor and down conductor duly insulated from wall surface/roof/Hanger of height 10 to 15 mtr of any type bldg/ hanger/ structure all as directed by Engineer- in- Charge. Note :- Contractor shall arrange necessary T & P, Transpotation safety equipments like halemet, safety belt etc while working on height, rate shall be deemed to be included in quoted rate (ii) Any casualty or injury sustained by the contractor’s workers during the working shall be sole responsibility of the contractor. No claim on this account shall be entertained by the department.
Material and labour for earthing complete with galvanized steel earth plate electrode of size 60cm x 60 cm x 6 mm thick buried directly in ground ( earth pit not less than 2.25 mtr deep below ground level) with top edge of earth plate not less than 1.5 mtr below ground level connected to galvanized iron strip 25 x 4 mm by means of of galvanized iron nuts & bolts or as directed at site by Engineer -in-Charge protected by GI Pipe 40 mm dia light grade and connected to test point and further connected to equipment, mcachinery, electrical panel or any other as directed by Engineer-in-Charge, which to be earthed, all as shown in electrical plate No 3 of SSR Part I including providion of concrete earth pit constructed in PCC 1:3:6 type C-1 as earth pit and PCC 1:2:4 type B-1 for cover slab with necessary reinforcement with handle for lifting also including provision of funnel with wiremesh with 20 mm GI pipe medium grade for watering, charcoal and salt in alternative layers of 15 cm thick all around the electrode , including necessary excavation and earth work , testing and commissioning complete all as directed at site. Note (i) Earth test should be done by contractor at his own cost and if less than 6 Ohms result is not found at site, entire earthing should by contractor again without accruing any extra cost to the department. No claim whatsover on redoing the earthing shall be admissible by the department to the contractor.
All as per Ser Item No 3 above but complete but by using galvanized iron strip 32 x 6 mm as earth continuity conductor complete all as directed by Engineer-in-Charge.
All as per Ser Item No 3 above but complete but by using with copper earth plate electrode of size 60cm x 60 cm x 3.15 mm thick and copper strip 20 x 3 mm as earth continuity conductor complete all as directed by Engineer-in-Charge. Note (i) Earth test should be done by contractor at his own cost and if less than 3 Ohms result is not found at site, entire earthing should by contractor again without accruing any extra cost to the department. No claim whatsover on redoing the earthing shall be admissible by the department to the contractor.
All as per Ser Item No 3 above but complete but by using galvanized iron earth lead wire 4.0 mm dia as earth continuity conductor complete all as directed by Engineer-in-Charge. Note (i) Earth test should be done by contractor at his own cost and if less than 8 Ohms result is not found at site, entire earthing should by contractor again without accruing any extra cost to the department. No claim whatsover on redoing the earthing shall be admissible by the department to the contractor.
M&L for Maintenance free chemical earthing system complete with UL 467 approved pure copper earth rods 17 mm dia. 3000mm long electrode buried in ground to bore holes 100mm dia vertically to a depth not less than 3.00 Mtr deep below ground level with top edge earth electrode at a depth not less than 300 mm below normal ground level, provision of copper bus bar of size 100mmX25mmX5mm for inter connection with copper earth lead strip 25mmX3 mm braize with eath electrode, Eqpt and further connected to test point terminal block of size 200mmX50mmX6mm made of copper as directed, including 45 Kg (Minimum) NABL Lab Certified back fill chemical compound for filling bore holes with soil mixed, 1 years warranty on resistance value at less than 2 Ohm will be given by the contractor and 10% of amount in quoted item rate should retain with dept upto 1 years. Including excavation and earth work and earth neutral voltage less than 03 Volts of PCC chamber in PCC (1:3:6) typeC-1 (using 20mm graded stone aggregate) with Pit cover of 300mmX300mm made of Cast Iron complete all as specified and as directed by Engr-in-Charge. Note : (i) Excavation work should be done by manpower/mechanicaly only. (ii) Earth test should be done by contractor at his own cost and if less than 2 Ohms result is not found at site, entire earthing should by contractor again without accruing any extra cost to the department. No claim whatsover on redoing the earthing shall be admissible by the department to the contractor. (iii) The quoted rate shall deemed to be included the rate of boring mechanicaly/Manuly in any type of soil, provision of earth pit with cover, mineral filled compound (earth back filled material) 50 kg, removal of excavated material from site, test link for test point, necessary sadling and mounting of copper strip on walls etc (iv) Copper strip complete will be measured and paid seperatly (v) Workmanship shall be carried out in accordance with guide lines of OEM (installation and commissioning) and the certificate from concerned OEM to this effect shall be obtained and submitted to department. (vi). Back-fill compund shall not be mixed with any soil while pouring in the bore hole. (vii) The earthing material supplied shall be checked /inspected by Jef's/respective Make Engineer (viii). Atleast One Jef Eco/respective Make Safe earthing installtion shall be carried out under supervision. (x) Earthing value for an individual earth pit should be less than 2 ohms type of soil/strata/rock/other if any etc.., complete all as specified and as directed by the Engineer-in-charge. including provision of earth pit cover, test link for test point, necessary saddling and mounting of strip complete all as directed. (xi) Required result of earthing less than 02 Ohm. If desired Ohmic value is not achieved then additional gride required with its allied items shall be provided by contractor without any extra cost to Govt. No price adjustment shall be made complete all as specified and as directed by the Engr- in-charge. including provision of earth pit cover, test link for test point, necessary saddling and mounting of strip complete all as directed Make: Ashlok, JEF ECO SAFE, SPA infrastructure's safe earthing electrode, Pune or JMV LPS Ltd, Delhi or equivalent as approved.
M & L for earth enhansing material/Backfill compound of A+ grade available in 25 Kg packaging bag (mineral filled compound) for lowering the resistivity of soil of existing earth pit against higher resistance.The backfill compound should strictly be a Activated carbon based conductive type which has the resistivity less than 0.12Ω mtr as per clause 14.5D of IEEE:80-2000 Standard. Tested as per IEC :62561-7 and the test certificate to be submitted .Shall not depend on the continous presence of water/moisture/salt to maintain its conductivty. Shall not decompose or leach out with time. Shall contain a corrosion inhibitor to prevent corrosion of copper. Should not contain hazrdous chemicals and necessary test certificate from reputed accredited laboratories shall be submitted.Should not get affected by drought and shall be stable between -10ᴼc to +50ᴼc temperatures. Shall be suitable for any kind of soil. Shall be supplied in sealed, moisture proof bags. These shall be marked with manufacturers name or trade nam, quantity, batch no & date of manufacture. Back-fill compound should be electronically conductive ( Like in metals) & should not depend on moisture for conduction. Back-fill compund should be environment friendly, should solidify when mixed with water and set like concrete and should not leach/diffuse into the ground, disconnecting or reconnecting strip with nuts & bolts complete all as directed by engineer in charge.Note Earth work & excavation rate shall be deemed to be included in quoted rate, copper plate will be cleaned by chemical/grinding machine, upto satisfactory level of Engineer-in-charge.Make:JEF ECOSAFE/JMV/KAPILNASH/JEF TECHNO SOLUTIONS
Supply and fix Aluminium strip of size 25 X 3 mm as earth continuity conductor for roof and down conductors fixed/run on wall/celing/roof of any type of bulilding/hanger /structure with proper clamping or saddling duly supported on porecelene/polycarbonate/wooden block with suitable fixing arrangement of nuts & bolts or psses through wall by making hole or any other indicated situation complete all as directed according site condition by Enginer-in-Charge. NOTE: i) The quoted rate does not include the rate for porecelene/ polycarbonate/wooden insulator, the same may be measured and paid seperately under the relevant items of this schedule.
S&F in repair green colour PVC Covered High Conductivity copper Tapes/Strip of size 25x3 mm Complete all as specified and directed. Note :- Joint of Strip will be done by Exothermic Welding or as per direction by Engr-in-Charge.
All as per Item No 11 above but Galvanised Iron wire of size 4 mm dia as earth continuity conductor complete all as directed according site condition by Enginer-in-Charge.
All as per Item No 11 above but Galvanised iron strip 32 x 6 mm as earth continuity conductor,complete all as directed according site condition by Enginer-in-Charge.
Supply and laying in trenches/ floor/hard standing, fixing on wall / roofs/ celing of any builgding/ structure GI Pipe 40 mm bore light grade including all necessary fittings for the protection of GI earth Strip complete all as directed by Engineer-in-Charge.
All as per item No 13 but GI Pipe 25 mm bore light grade including all necessary fittings for the protection of GI earth Strip and mounting of air termination rod complete all as directed by Engineer-in-Charge.
Repair/replacement of existing damaged earth chamber of PCC of any size including removal of old chamber and disposing at outside the MOD land, complete all as specified and as directed by the Engineer-in-charge.
M&L for carrying out physical inspection and measurement of individual earth pit resistance of each earth pit, every month located in Tech, Adm, SMQ and OMQ area and maintain the record of its reading month wise and submitt this office timely. For measuring the resistance of individual electrode of LV distribution system and other non-DG/ Transformer by fall of poterntial test in case fall of potential method is not possible at certain locations then measurememnt of earth pit reisistance shall be carried out in stake less method using current and voltage clamps. Total 525 Nos earth pit approx located in different area of this station shall be measured in each month or all as directed. pit for measurement of pit resistance inclusing necessary excavation in any type of soil, or braking of hardstanding for inserting of spikes complete all as directed by Engineer-in-Charge. iii) The rate also include to inspect and measure resistand of any type of earth( like conventional or chemical, strip or wire any size) complete and earth resistance machine complete all as specified and diretced b E-in-C. Note : Earth resistance machine will be provided by contractor without any extra cost for testing of earth resistance
M&L for fixing air temination single pointed aluminium rod 12 mm dia and 300 mm long as directed by engr -in - charge.
Repair maint Dissimilar to similar metal welding of any size, any metall earth strip in existing earth Joint of Strip will be done by Exothermic Welding or as per direction by Engr-in-Charge. Note :- Require earth strip GI/Copper will measured and paid separately .
M & L for periodical service/Checking of fire detecting/Alarm system comprising of Fire alarm panel, MCP, Fire/Smoke detectors at Block II 219 tyre shead A Bldg at complete including checking the all controll circuit and connection from sensor to control circuit of microprocessor based fire alarm panel, Alarm circuit for smooth functioning by employing one skilled tradesman / OEM rep in perodical monthly time interval or as and when required as directed by EIC. The rate including following works (a) Replacing the LED type indicating lamp at microprroccer based fire alarm panel as required at site. (b) Checking the serviceability of smoke detector by creating the Heat \ smoke artificially at sensing range of smoke detector and reset the alarm panel after check the each smoke detector and check the indication of alarm panel as per the Zone wise and as per the manufactures/OEM specification. (c) Replacemment old/Unserviceble small piece of wires up to one Rm of size up to 2.5 sq mm as directed by EIC. (d) ) if it is not attending the complaint/check with in 3 days @ Rs. 2000.00/day shall be recovered form the fourth day by the contractor.
All asper the item no 19 above but for the Block II 220 Bldg Tyre Shead B site A all as specified and as directed by Engineer- in - Charge
All asper the item no 19 above but for the P- 14 Hnager all as specified and as directed by Engineer- in - Charge
All asper the item no 19 above but for the Armoury - (i) all as specified and as directed by Engineer- in - Charge
All asper the item no 19above but for the Armoury -(ii) all as specified and as directed by Engineer- in - Charge
All asper the item no 19 above but for the IT Section -(iii) all as specified and as directed by Engineer- in - Charge
All asper the item no 19 above but for the HQ Bldg AO& IFA section -(iii) all as specified and as directed by Engineer- in - Charge
Supply and fix repair UNSV addressable Multi Sensor,Optical Detector,of Rise and Fixed temperature heat detector,flashing LED,Algorithms and mapping drift compensation, 8 bit processor with remote indicator output, certified by LPCB and EN 54. Make: Bosh/Ravel System Sensor.Including taking down old U/S one. all as specified and directed by Engr-in-Charge
Supply and fix repair Conventional combined Sounder and strobe Including taking down old U/S one. all as specified and directed by Engr-in-Charge
Supply and fix in repair Conventional combined Sounder and strobe with one Kilometer range. .Including taking down old U/S one. all as specified and directed by Engr-in-Charge
Supply and fix in repair battery 12 volt 7 AH as per exisiting make and sepecification required dt site .Including taking down old U/S one. all as specified and directed by Engr-in-Charge
Supply and replace of 1.5 Sqmm x 2 core FR PVC insulated copper conductor armoured Cable on wall/laying with steel conduit with suitable size of fixing arrangement.Including taking down old U/S one any hight of bldg and hanger complete all as specified and directed by Engr-in-Charge
SONA LAKSHMI ASSOCIATE (BID ID -3354694)
Shree Sai Samarth Enterprises (BID ID -3343585)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .