Purchasing of material for the repair of D/P, E/P and VT pump sets in BWS Mech. S/Dn Hisar O/o HWS Mech. Division Hisar

Amount

Flexible Wire 40/76 (2 Core Flexible copper wire with 15 A Current carrying capacity and 0.6mm insulation thickness.) Make : any reputed make

Kit-Kat 63 Ampere (Porcelain Material, Size as per Indian Standards, 415 V, Brown Color, Brass Parts.) Make : any reputed make

Kit-Kat 100 Ampere (Porcelain Material, Size as per Indian Standards, 415 V, Brown Color, Brass Parts.) Make : any reputed make

Kit-Kat 200 Ampere (Porcelain Material, Size as per Indian Standards, 415 V, Brown Color, Brass Parts.) Make : any reputed make

Copper wire 7/16 (Maximum overall diameter 7.10mm, Size of Conductor 16 Sq. mm, Thickness of insulation 1.0 mm with BIS Certification.) Make : any reputed make

PVC Tape Roll (Nominal Width 8 mm and Nominal Thickness 0.125 mm preferably.) Make : any reputed make

PVC copper flat wire 6mm-3 Core (Should be manufactured with conductor using annealed exposed copper wire of electrolytic position making it ideal to use in underground, underwater and on wet surfaces.) Make : any reputed make

PVC copper flat wire 10mm-3 Core (Should be manufactured with conductor using annealed exposed copper wire of electrolytic position making it ideal to use in underground, underwater and on wet surfaces.) Make : any reputed make

Fuse wire Make : any reputed make

Endshield 63Amp. Make : any reputed make

Endshield 200Amp. Make : any reputed make

Fix contact 25-40 HP, MEI Type, Make : any reputed make

Fix contact 25-40 HP, KILLBURN Type, Make : any reputed make

Moving contact 25-40 HP, MEI Type, Make : any reputed make

Moving contact 25-40 HP, KILLBURN Type, Make : any reputed make

Moving contact 80-100 HP, MEI Type, Make : any reputed make

Fiber Sleeve 63Amp., Make : any reputed make

Fiber Sleeve 100Amp., Make : any reputed make

Fiber Sleeve 200Amp., Make : any reputed make

U patti 63Amp., Make : any reputed make

U patti 100Amp., Make : any reputed make

U patti 200Amp., Make : any reputed make

U patti Clamp 63Amp., Make : any reputed make

U patti Clamp 100Amp., Make : any reputed make

U patti Clamp 200Amp., Make : any reputed make

Main Switch 100Amp., Make : any reputed make

Main Switch 200Amp., Make : any reputed make

Starter 25-40HP (Oil immersed) Make : any reputed make

Starter 80-100HP (Oil immersed) Make : any reputed make

Hand insulated Gloves, Make : any reputed make

Overlaod Relay, MEI type (for 25-40 hp starter)Make : any reputed make

No Volt Coil, MEI type(for 25-40 hp starter)Make : any reputed make

Aluminium Cable 35mm, Make : any reputed make

Foot Valve 5” (PVC) Make : any reputed make

Foot Valve 6” (PVC) Make : any reputed make

Nut & Bolt 3 soot*2.5" (Quality tested as per the Indian standars Make : any reputed make

Nut & Bolt 3.5 soot*2.5" (Quality tested as per the Indian standars Make : any reputed make

Nut & Bolt 4 soot*2.5" (Quality tested as per the Indian standars Make : any reputed make

Nut & Bolt 5 soot*3" (Quality tested as per the Indian standars Make : any reputed make

Nut & Bolt 6 soot*4" (Quality tested as per the Indian standars Make : any reputed make

Hose Nipple 5” (PVC) Make : any reputed make

Hose Nipple 6” (PVC) Make : any reputed make

Bearing 6306 (Boundary Dimensions (bore dia)* (outer diameter)* (width) in mm as per IS 5669-1987, Bearing cage material as per IS 2398, Radial internal clearance as per IS 6455-1972.)Make : any reputed make

Bearing 6307 (Boundary Dimensions (bore dia)* (outer diameter)* (width) in mm as per IS 5669-1987, Bearing cage material as per IS 2398, Radial internal clearance as per IS 6455-1972.)Make : any reputed make

Bearing 6310 (Boundary Dimensions (bore dia)* (outer diameter)* (width) in mm as per IS 5669-1987, Bearing cage material as per IS 2398, Radial internal clearance as per IS 6455-1972.)Make : any reputed make

Bearing 7312 (Boundary Dimensions (bore dia)* (outer diameter)* (width) in mm as per IS 5669-1987, Bearing cage material as per IS 2398, Radial internal clearance as per IS 6455-1972.)Make : any reputed make

Pipe Wrench 24” (Conformity to IS: 4003 (Part I) - 1978 for General Purpose Pipe Wrench with latest amendments.) Make : any reputed make

Pipe Wrench 36” (Conformity to IS: 4003 (Part I) - 1978 for General Purpose Pipe Wrench with latest amendments.) Make : any reputed make

Ring Panna 10 Pcs. (Tools tested and certified as per IS: 4595-1969 (Latest) Standard. Scientifically heat Treated to give maximum Strength and wear resistance.) Make : any reputed make

G.I. Wire (Mild Steel wire with Galvanized Finish and drawn in conformity to Indian standard IS 280: latest.) Make : any reputed make

Nylon Rope 3/4” (Governing specifications conforming to Indian Standard IS 4572: 2014 (Latest).) Make : any reputed make

Reducer 6”*5” (Cast Iron / Steel, both end flanged reducer with Holes as per the design specifications of 5” and 6” rubber flanges.) Make : any reputed make

Flange 5” (Ring Gasket made of natural rubber with 8 Holes with 6 mm thickness preferably. Must be efficient in works related to Fluid restriction, Vibration dampening, Weather insulation, Electrical absorption, Packaging, Noise reduction and Cushioning.) Make : any reputed make

Flange 6” (Ring Gasket made of natural rubber with 8 Holes with 6mm thickness preferably. Must be efficient in works related to Fluid restriction, Vibration dampening, Weather insulation, Electrical absorption, Packaging, Noise reduction and Cushioning.) Make : any reputed make

Flange 14” (Ring Gasket made of natural rubber with 12 Holes with 6mm thickness preferably. Must be efficient in works related to Fluid restriction, Vibration dampening, Weather insulation, Electrical absorption, Packaging, Noise reduction and Cushioning.) Make : any reputed make

Flange 16” (Ring Gasket made of natural rubber with 12 Holes with 6mm thickness preferably. Must be efficient in works related to Fluid restriction, Vibration dampening, Weather insulation, Electrical absorption, Packaging, Noise reduction and Cushioning.) Make : any reputed make

Polythene sheet 250 Micron Make : any reputed make

Rubber sheet, Make : any reputed make

D.E Spanner 10 Pcs. Make : any reputed make

D.E Spanner 12 Pcs. Make : any reputed make

Old Dhoti

C.I. Impeller (Duly machined and dynamically balanced C.I. impeller for 05 Cs V.T. Pump for vibration free noiseless and smooth operation.) Make : As per Sample

Gland Plate (Corrosion resistant and durable G.M. gland Plate for a 05 Cs V.T. Pump. Quality must be tested on several parameters to ensure that there are no defects or flaws.) Make : As per Sample

Gland Plate (Corrosion resistant and durable G.M. gland Plate for a 10 Cs V.T. Pump. Quality must be tested on several parameters to ensure that there are no defects or flaws.) Make : As per Sample

Bush (Cylindrical Gun Metal (G.M.) Bush for 10 Cs V.T. Pump with good tensile strength, high tolerance, robust construction, resistance to corrosion & abrasion and durability, quality tested on several parameters to ensure that there are no defects or flaws.) Make : As per Sample

Bush (Cylindrical Gun Metal (G.M.) Bush for 05 Cs V.T. Pump with good tensile strength, high tolerance, robust construction, resistance to corrosion & abrasion and durability, quality tested on several parameters to ensure that there are no defects or flaws.) Make : As per Sample

Bush (Rubber Bush for 10 Cs V.T. Pump having good Shore hardness, tensile strength, percentage elongation & structural tolerance.) Make : As per Sample

Bush (Rubber Bush for 05 Cs V.T. Pump having good Shore hardness, tensile strength, percentage elongation & structural tolerance.) Make : As per Sample

Gland Housing (Gland Housing for 5 Cs V.T. Pump is required. Material must have good tensile strength, high tolerance, robust construction, resistance to corrosion & abrasion and durability, quality tested on several parameters to ensure that there are no defects or flaws.) Make : As per Sample

Sleeve 38mm 9" (Stainless Steel Sleeve for 05 Cs V.T. Pump.) Make : As per Sample

Sleeve 38mm 9" (Stainless Steel Sleeve for 10 Cs V.T. Pump.) Make : As per Sample

V.T. Motor Coupler (for 5Cs. V.T Pump), Make : As per Sample

V.T. Motor Coupler (for 10Cs. V.T Pump), Make : As per Sample

G.M impeller (Duly machined and dynamically balanced G.M. impeller for 05 Cs V.T. Pump for vibration free noiseless and smooth operation.) Make : As per Sample

G.M impeller (Duly machined and dynamically balanced G.M. impeller for 10 Cs V.T. Pump for vibration free noiseless and smooth operation.) Make : As per Sample

Rubber Zen 12" Make : As per Sample

HARYANA AGRO AGENCY