SPL REPAIRS TO BLDG NO P-114 TO P-118 AND P-276 AND CERTAIN REV WORKS AT SGNR MIL STN

Amount

Dismatiling brick tiles or terracing tiles, single layer on roofs and mud phuska complete all as specified and directed by Engineer - in - Charge.

(a) Cleaning the roof surfaces thoroughly using wire brushes to remove and apply 15mm thick plaster in CM 1:3 with WPC. (b) After min curing period to plaster work preparation of roof top surfaces. (c) M & L for applying Pitch free PU based liquid applied single component elastomeric seamless, water and vapour membrane system for concrete @ Min 1.0 Kg/M2(02 coats). Typical application will include roofs, podium, balconies, floor slabs, suspended floors, patios, bathrooms, inspection pits, swimming pool, bridge decks, conforming Tensile strength (2N/mm2) (ASTM D412)/Tear resistance (15 KN/m) (ASTM D624-00) and Crack bridging (ASTM C 836/ASTM c 1305 modified) 2mm. After 72 hours of curing, flood test can be carried out to a minimum depth of 50mm of water for 24 hours. Drains shall be plugged and barriers placed to contain the water. Make : Equivalent of Fosrcc/Sika/Bostik/Choksey etc. Note : (i) All above operations to be done by authorised applicator all as specified and directed. (ii) Contractor will submit proof for authorised applicator to GE before execution of work.

M&L for providing and applying polyurethane liquid applied roof waterproofing with improved water ponding capability, thermal insulating Elastomeric high build liquid membrane for concrete roofs for exterior wall and exposed surface with solid content not less that 60 % and solar reflectance Index 106 as per (ASTM E-1980-19)/ Tear strength ~ 20 N/mm (Free film, 14 days, + 300 C) (ASTM D4541). Note :- (i) All above operations to be done by authorised applicator all as specified and directed. (ii) Contractor will submit proof for authorised applicator to GE before execution of work. Make : M/s SIKA India Pvt Ltd/ Fosroc/ Chemso/Bostik/ Choksey etc.

M & L for PCC 1:2:4, type B-0, as in roof Kerb/concrete padding making concave shape gola at junctions of roof/ terrace with parapets/ sides walls/ benching course of roof top surface finished even and leveled.

Dismantling for floor hearth or wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but n. exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and incl 15 mm thick screed bed in cm 1:6 all as specified and directed.

M&L 600x300x7/450x300x7 mm thick glazed ceramic coloured tiles as in vertical sufaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles including 10mm backing coat in CM 1:4 complete all as specified and directed.

M & L machine cut kota stone slab flooring 18-25mm thick (minimum size 55 cms x 55 cms) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror polishing including 15mm of screed bed in CM 1:6 aggregate complete all as specified and directed.

M & L machine cut kota stone slabs as in vertical surfces such as risers of steps/vertical surfaces 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror polishing also moulding edges including 10mm of backing coat in CM 1:4, complete all as specified and directed.

M & L granite (of any type) work 16 to 20 mm thick (table rubbed and polished) in cooking platforms and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of graniteincluding 15mm of screed bed in CM 1:6 and rounding edges complete all as specified and directed.

M & L for 100 mm thick cement concrete type D-2, 1:4:8, using 40 mm graged stone aggregate as in flooring all as specified.

M&L 75 mm thick cement concrete flooring type C2, 1:3:6, using 40 mm graded stone aggregate complete all as specified and directed by Engineer - in - Charge.

M&L 25mm thick cement concrete flooring type B0, 1:2:4 using 12.5 mm graded stone aggregate finished even and fair complete all as specified and directed by Engineer - in - Charge.

Demolition of brick work built in cement mortar of any description.

M&L for brick work with fly ash bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

Taking down cement plaster including raking out joint, hacking for key & scrubbing down with water etc complete all as specified and directed.

M&L, 15mm thick rendering in CM 1:6 on fair faces of brick or concrete wall surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L, 15mm thick rendering in CM 1:4 on fair faces of brick or concrete wall surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L, 5mm thick rendering in CM 1:3 on fair faces of concrete surfaces as on ceilings finished even and smooth without using extra cement complete all as specified and directed.

M & L Preparation of new plastered surfaces of wall and applying two coats of cement base paint over 1 mm thick wall putty over one coat of alkali resistant primer complete all as specified and directed

M&L for preparation of newly plastered surface of wall any description and applying two coats of oil emulsion distemper over over 1 mm thick wall putty over a coat of chalk whiting layer on plastered surfaces preparatory to distempering.

M&L three coats of white wash to new surfaces on ceilings including preparation of surface complete.

M&L two coats of white wash to old surfaces on ceilings including preparation of surface complete all as specified and directed.

M&L for preparation of old surface including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and removing all dirt and dust by watering making surface even and smooth and then applying two coats of cement base paint over over 1 mm thick wall putty well prepared old decorated plastered surface etc all as specified and directed by Engineer - in - Charge.

M & L for preparation of old decorated wall surfaces by brooming down or steel wire brushing,scrapping down smoke soot,moulds,moss and efflorescent salts and trading oil and greasy spots and then applying two coats of oil bound distemper over 1.5 mm thick wall putty complete all as specified and directed by Engineer - in - Charge.

M&L one coat of synthetic enamel paint on old painted surfaces of wood and wood based materials over 10 cm width or girth including preparation complete all as specified and directed.

M&L one coat of synthetic enamel paint on old painted surfaces of steel and iron work over 10 cm width or girth including preparation complete all as specified and directed.

Taking down PVC/FRP chowkats or frames (without taking off shutters from the frame) not exceeding 1.5 sqm each complete all as specified and directed.

Taking down steel window/ventilators chowkats or frames (without taking off shutters from the frame) not exceeding 1.5 sqm each complete all as specified and directed by Engineer in Charge.

Taking down wooden chowkats or frames (without taking off shutters from the frame) exc 1.5 sqm but not exc 4 sqm and refixing the same in same opening each.

S&F MS falt iron 25 x 6mm as in hold fast confirming to Fe 290 Gde E-165 complete all as specified and directed by Engineer in Charge.

S & F pressed steel frames of frame size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

M&L providing cement concrete (1:3:6), type C1, using 20mm graded stone aggregate for filling in pressed steel frames and PCC blocks for hold fasts complete all as specified and directed by Engineer-in-Charge.

M&L 35mm thick factory made plain, framed panelled shutters (any number of panels) with panels of timber flat on both sided (feather edged) or of veneered particle board medium density wood particle board with commercial face veneers supplied and fitted to chowkats.

M&L 2nd class hardwood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

M & L for Factory made single extruded WPC (Wood Polymer Composite) solid door/window/ceosetory windows & other Frames/chowkhat of size 75x50 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/ wheat husk) and non toxic additives ( maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/ mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S hold fast/ lugs or SS dash fasteners shall be paid for separately). Note : For WPC solid door/ window frames, minus 5mm tolerance in dimension i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Providing and fixing factory made single extruded WPC ( Wood Polymer Composite solid decorative type flush door shutter of size 24mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fivers ( wood powder/ rice husk/ wheat husk) and non toxic additives ( maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/ Cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge) ,minimum compressive strength 50 N/mm2 modulus of elasticity 850 N/mm2 and resistance to spread of flame of Cass A category with property of being termite/ borer proof, water/ moisture proof and fire retardant, WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel but hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. Note : stainless steel butt hinges and necessary S.S screws shall be paid separately).

S& F powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars,aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No). hinges type B-21 100mm long (2 no.) suitable handle (2 Nos) and tower bolt (02 Nos) complete all as specified and directed.

S&F Anodised aluminum grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15 ) of approved design /pattern, with approved standard section and fixed to the window /door with C.P brass/SS screw @ 200mm centre to centre , including cutting the grill to proper opening size for fixing and operation of handles including flyproof wire mesh. Note:- (a) Design shall be approved by Engineer - in - Charge. (b) Minimum thickness of powder coating shall not be less than 50 micron.

S&F aluminium handle cast type anodised, 150mm long complete all as specified.

S&F 150 alminium anodies barrel tower bolts of extruded sction and fixed complete all as specified and directed.

S&F 300mm long aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified.

M&L two coats of synthetic enamel paint over a coat of pink primer on new surfaces of wooden and wood based materials over 10 cm width or girth including preparation of surfaces complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick sorrounds, glazed with oil putty or fixed with beads complete all as specified and directed.

S & F 4 mm sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane complete all as specified and directed.

S&F drapery curtain rod 25mm dia, fancy type, fabricated out of mild steel sheet not less than 20 gauge, including brackets and pair of decorated end knobs (finials), stop roller etc, pretreated power coated natural color complete all as specified & directed by Engr-in-Charge.

Taking down eaves gutter or rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan necks etc complete all as specified and directed.

S&F 110mm bore PVC (SWR) rain water pipe single socketed in any length with rubber ring joints, jointed with solvent fixed to wall with matching PVC SWR rings including cutting holes and making good the disturbed portion with PCC (1:2:4), type B0, complete all as specified and directed.

Taking up or down GI steel water tubing 15mm bore and connections including fittings from floor/walls/ceiling complete all as specified and directed.

Taking up or down GI Steel water tubing 20mm bore and connections including fittings from floor/walls/centrings complete all as specified and directed.

Taking down or up steel water tubing 25 mm dia bore of pipe and removal to store complete all as specified and directed.

Supplying and laying of CPVC pipes of dia 20 mm SDR 11 & Plain CPVC SDR 11 inlcuding all fittings i.e.Brass elbow, Brass Tee, Male threaded Brass adaptor, Female threaded brass adaptor, unions ball valves, flange and tank adaptor etc) concealed including cutting chases to brick wall/ceiling or laying in floors/trenches and making good complete all as specified and directed by Engr in Charge.

Supplying and laying of CPVC pipes of dia 25 mm SDR 11 & Plain CPVC SDR 11 inlcuding all fittings i.e.Brass elbow, Brass Tee, Male threaded Brass adaptor, Female threaded brass adaptor, unions ball valves, flange and tank adaptor etc) concealed including cutting chases to brick wall/ceiling or laying in floors/trenches and making good complete all as specified and directed by Engr in Charge.

Supplying and laying of CPVC pipes of dia 32 mm SDR 11 & Plain CPVC SDR 11 inlcuding all fittings i.e.Brass elbow, Brass Tee, Male threaded Brass adaptor, Female threaded brass adaptor, unions ball valves, flange and tank adaptor etc) concealed including cutting chases to brick wall/ceiling or laying in floors/trenches and making good complete all as specified and directed by Engr in Charge.

Dismantling water tanks any type exc. 500 ltr but nexc 1000 ltr complete all as specified and directed.

S & F rotational moulded polythene water storage tank Three layer white coloured (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I (1000 Ltrs) capacity complete all as specified and directed.

S&F 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20 mm - 210 gms / 25mm-455gms/ 40mm - 690 gms).

S&F wall hung EWC with UF Seat Cover ,Hinges, Accessories Set Size 385 x 595 x385 mm white complete, including concealed body flushing cistern with hinging arrangement, complete all as specified and directed by Engineer-in-Charge

S&F in repairs bathroom cabinet of PTMT with looking mirror of size 350x555mm complete all as specified and directed by Engineer-in-Charge.

S&F in repair for vitreous China urinals,half stall urinal (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) and including Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms).

Supply and fix in repairs vitreous china wash hand basin counter shank with green/black granite slab to be cut and polished at site as per requirement and approved by Engineer-in-charge, fincluding brackets, 32mm bore brass chromium plated waste coupling & 32mm bore low density polythelene (LDPE) flush pipe of pressure 6Kgf/Sqcm (1.00M long,) including 15mm bore 450/600mm length PVC connection with PTMT nuts complete all as specified and directed by Engineer-in-Charge. Note : Granite shall be measured and paid seperately.

S&F CP brass soap dish of fancy type, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs brass chromium plated shower rose 125 mm size without swivel joint including fixing to steel pipe of 15mm bore or union complete all as specified and directed by Engineer-in-Charge.

S&F in repairs CP brass towel rack, 20mm dia, ‘D’ type, 60cm long between flanges, fixed to PVC rawl plugs with chromium plated brass screws, complete all as specified and directed by Engineer-in-Charge.

S&F 15mm bore PVC connections, with PTMT nuts, of length 450/600mm complete all as specified and directed.

S&F 40mm bore PVC low density (LDPE) pipe of pressure 6kg/Cm2 fixed to wall or laid in floor, complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs chromium plated angle stop valves, cast copper alloy 15 mm bore screwed down high pressure with crutch or butter fly handle for iron pipe or for union and complete all as specified and directed.

Supply and fix in repairs chromium plated with long shank and cup (concealed type) angle stop valves, cast copper alloy 15 mm bore screwed down high pressure with crutch or butter fly handle for iron pipe or for union and complete all as specified and directed.

S&F in repair 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs15mm bib taps cast copper alloy, chromium plated fency type with crutch or butterfly handle screwed down screwed for Iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F 15mm dia fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.

S&F Stainless Steel grating 125mm dia with waste hole (Minimium weight 40 grams) complete all as specified and directed by Engineer-in-Charge.

Dismantling of cast iron or reinforced concrete drain pipes jointed in cement mortar and taking out of trenches complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors laid in trenches or in floors complete all as specified and directed.

S&F 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors laid in trenches or in floors.

S&F 75mm dia PVC (SWR) Vent Cowl.

S&F 75 mm bore dia PVC (SWR) bends.

S&F 75mm PVC (SWR) branch piece, single (single Y) equal or unequal.

S&F 75mm PVC (SWR) junction single, (Single T/double T) equal or unequal

S&F 110 mm bore dia PVC (SWR) bends.

S&F 110 mm PVC (SWR) branch piece, single (single Y) equal or unequal

S&F 110 mm PVC (SWR) junction single, (Single T/double T) equal or unequal

M & L for 75mm thick cement concrete type C-2, 1:3:6, using 40mm graded stone aggregate as in plinth protection all as specified.

M & L for 40mm thick cement concrete type B-1, 1:2:4 using 20mm graded stone aggregate as in flooring , finishing cement concrete surface even and smooth without using extra cement all as specified.

M&L for 22 mm thick Plastic dividing strips, 1.5mm thick inserted in position, conform to design omplete all as specified and directed by Engineer-in-Charge

Demolition of Cement concrete (reinforeced) of any description and in any position not otherwise specifically provided, complete all as specified and directed.

M&L for reinforced cement concrete type B1, 1:2:4, (using 20mm graded stone aggregate in RCC for chajja, parapit wall slab etc complete all as specified and directed.

M & L Reinforced cement concrete 1:1:2 (nominal mix) 20mm graded stone aggregate as in slabs supported on walls, beams and columns , in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engineer-in-Charge.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed by Engineer-in-Charge

M&L for formwork to edges of concrete flats and similar works thickness n. exc. 200mm Complete all as specified and directed.

M & L for form work to the chajjas slab,beams and walls for rough finished surfaces of concerte flat not exc 200mm thick complete all as specified and directed.

M & L RCC 1:1:2 (nominal mix) using 20mm graded stone aggregate as in Beams cantilevers, bressummers lintels over 1.5 m span complete all as specified and directed.

Repair to damaged concrete slab/Beam/Column/Parapet/lintels/chajjas by using micro mortar and concrete in following stages:- (a) Removing the falling mortar and concrete from RCC surface and cutting the affected area in geometrical shape.(b) After cleaning loose scale or oxidized chips from bars/cleaning the rusted reinforcement and applying rust removal i.e. applying alkaline based Anti oxidizing compound for steel structure conforming to ASTM D 1748-10(2015), having specific gravity 1.2 -1.22. the material to be applied to the rusted metal using brush, allow it to react for 16 to 24 hrs and afterwards wire brushing the surface Clean with dry cloth before application of protective coating etc (c) Provinding adequate additional reinforcement in case the cross sectional area reduction is more than 20 percent by reinfocement jacketing. Welding the reinforcement with existing one and supporting the new supporting adequately on walls if required with grout.(d) Providing micro mortar and concrete over bond coat to cover the reinforcement and slab surface.(e) Providing adequate formwork and scaffolding if required.(f) Curing the surface. Rust removal, Bonding agent, grout, micro mortar and concrete and related chemicals. Note : Work is to be got executed from authorized applicators of company. Make : Dr Fixit/BASF/STP/Thermax chemco system/webac chemicals.

M&L for TMT bars 6 to 8mm dia and over cut to length bend to shape reqd incl crancking and incl mild steel wire (annealed) not less than 0.9mm dia all as specified and directed.

M&L for TMT bars 10mm dia and over cut to length bend to shape reqd incl crancking and incl mild steel wire (annealed) not less than 0.9mm dia all as specified and directed.

Taking down shutters door/window/cupboard of any description (Wooden/ aluminium/iron/Glass) of any material and any type exc 1 Sqm but n. exc 2 sqm each and repairing work in all respects including and refixing in same opening complete all as specified and directed by Engineer - in - Charge.

S&F in repair colour coated stainless steel with matt or Glossy finish rolling shutter exc 10 sqm not exc 20 sqm each side motor (copper wiring) of single phase of power 370W,220 V, Frequency- 50Hz,Speed-4.8r/mi,lifting capacity of 600 Kg and above (as per site requirment) with remote of as per sample including Safety lever locks, channel guide shall be fixed with PCC 1:2:4, mild steel all types other accessories etc (conforming to IS 6248) complete all as specified and directed by Engr in Charge. Note : (i) Warranty card to be provided by the contractor. (ii) Taking down of old existing rolling shutter is included and shall not be paid separately.

Demolition concrete (unreinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level) all as specified.

M&L for hardcore of broken bricks gauge exc 63mm nit n.exc 100mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and rolled /rammed to true surface.

M&L75 mm thick cement concrete type D2, 1:4:8 (Using 40mm graded stone aggregate) filling and mass concrete complete all as specified and directed.

M&L 25mm thick cement concrete flooring type B 1, 1:2:4 using 20 mm graded stone aggregate finished even and fair complete all as specified and directed.

M&L for sand filling under floors or in foundations, cable protection including watering and consolidation complete all as specified and directed.

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and no pigment complete all as specified and directed.

M&L providing precast cement concrete in PCC (1:2:4), type B-1, with 20 mm graded aggregate for kerb stone and similar works with plain fair finishes including chamfers, weatherings, throating etc. and setting in mortar (1:4) complete with joints to match complete all as specified and directed by Engineer - in - Charge.

S&F Continuous( piano) hinges, mild steel , bright finish or electro galvanised Width of flaps 30mm (when open) complete all as specified and directed.

S&F in repair S&F 18mm thick high Density High Moisture Resistant (HDHMR) exterior Grade Board with both side white balancing (BSB) with density of 850 Kg/cu.m complete all as specified and directed. Note : (a) Board on back side wall will be fixed with minimum 5mm PVC spacers. The payment for the same deemed to be included in the quoted unit rates. (b) Rates of following items are included : (i) Auto closing hinges 35 mm of 0 crank( KH-001) or 8 crank (KH-002) openable at 110 degree. (ii) Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs. (iii) Tower bolts 250mm long of stainless steel 304 finished/of outer plate metal matt finished. (iv) D type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 200mm long matt finished. (v) Stainless steel 304 Grade 75mm ‘Z’ hinges/ Auto closing 35mm hinges Make : Action Tesa/ Greenpanel/Century.

Dismantling steel/aluminium sheets of any type (corrugated semi corrugated ,Plain or corrugated steel sheeting,any gauge, thickness etc) sheet in roof covering.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F 0.56 Plain, Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight and for covering of crumple joint etc complete all as specified and directed.

Demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof)

M & L for machine cut kota stone rubbing, granite finished mirror polishing complete all as specified.

M & L machine cut kota stone slab flooring 18-20mm thick (minimum size 55 cms x 55 cms) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror polishing including 15mm of screed bed in CM 1:6 complete all as specified and directed.

M&L for double charged, premium quality Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match set and jointed in neat cement slurry and joints to be filled with epoxy grout including 15mm thick screed in CM 1:6 complete all as specified and directed by Engr in Charge.

M&L providing precast cement concrete 1:2:4 Type B1 as in cover slabs (for manholes etc) and similar articles with plain faces and set in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge. Note : The rate quoted shall be deemed to include use and waste of necessary form work.

M&L brick work with burnt clay old size bricks straight or curved on plan exceeding 6.0m mean radius built in cement mortar 1:6 all as specified and directed by Engineer – in – Charge.

M&L two coats of oil emulsion distemper over a coat of primer on newly plastered wall surfaces with putty finish & including preparation of surface complete all as specified and directed.

M&L two coats of oil distemper over old decorated surfaces of wall after complete removal of existing treatment including preparation of surface with putty finishes complete all as specified and directed.

M&L two coats of acrylic weather apex paint on newly plastered wall surfaces including preparation of surface with putty finish complete all as specified and directed by Engineer - in - Charge.

M & L two coats of white wash to old decorated surfaces on ceilings including preparation of surface with putty finishes complete all as specified and directed

M & L three coats of white wash to new surfaces on walls including preparation of surface with putty finishes complete all as specified and directed

M&L two coats of acrylic weather apex paint on wall surfaces including complete removal of existig tratment and preparation of old painted surface with putty finish complete all as specified and directed by Engineer - in - Charge.

Taking down steel window / ventilators ( not exc 1.5 Sqm each).

M&L for PCC, type C-2, 1:3:6, (40mm graded stone aggregate) for filling of post hole all as specified and directed.

S&F steel windows with side hung shutters including hinges with steel handle and steel peg stay, complete with glazing bars, devetailed or welded complete all as specified and directed.

S&F 100mm long butt hinges, heavy weight, cold rolled mild steel complete all as specified and directed.

S&F 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F in repair stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified.

Supply & Fix 4mm thick figured glass, pin head type and glazing with oil putty or fixed with beads in suqares n.exc 0.5 Sqm in each pane complete all as specified and directed.

S&F powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges,powder coated aluminum snap beading screws etc. complete all as specified.complete all as specified.

M&L two coat of synthetic enamel paint on old painted surfaces of wood and wood based materials over 10 cm width or girth including preparation complete all as specified and directed.

M&L two coats of synthetic enamel paint on old painted surfaces of steel and iron work over 10 cm width or girth including preparation complete all as specified and directed.

M&L, two coats of synthetic enamel paint over a coat of red oxide on steel surface over 10 cm width or girth, not otherwise described including preparation of new surface.

Supply & Fix in repairs white vitreous china squatting pan orissa pattern of size 580mm x 440 mm, with integral foot rest and P or S trap connection to trap and to flushing pipe front or back inlet including, trap and taking out old WC & connections etc complete all as specified and directed.

S&F in repair, 10 ltr capacity low level PVC valveless, syphonic action type flushing cistern(dual system), white, with inlet, ball valve, flush pipe, PVC connection 15 mm dia and 450 mm long float and handle including bracket.

S&F PVC gratings 100 mm dia of PTMT fixed in repairs. (Minimum weight 25 gms).

S & F Galvanised steel water tubing 15 mm bore medium grade with all fittings concealed including cutting chases to brick wall/ceiling or laying in floors and making good complete all as specified and directed.

Fixing only tubes, of 15mm bore any grade,(medium) to walls and ceilings or laying in floors complete all as specified and directed.

S & F GI steel water tubing 20mm bore medium grade with all fittings and fixed complete to walls ceiling or laid in floors complete all as specified and directed.

S & F tubes, of 25 mm bore any grade, (medium) to walls and ceilings or laying in floors complete all as specified

Supply and fixing in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed for bore dia of pipe 20mm complete all as specified and directed.

M&L for 100mm dia cast iron spun cast waste and vent pipes in any length with or without ears with cement jointed fixed to wall complete all as specified and directed.

M&L for 75mm dia cast iron spun cast waste and vent pipes in any length with or without ears with cement jointed fixed to wall complete all as specified and directed.

M&L for 100mm dia cast iron Bends .

M&L for 75mm dia cast iron Bends.

S & F in repair stainless steel curtain rod, 25mm dia minimum 20 gauge sheet fancy type with fixing of decorated type brackets, stops, rollers including end knobs (all stainless steel) etc complete all as specified and directed.

S&F in repair for door closer hydraulically regulated, alunimiun body designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed.

S & F in repair Stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Supply and fix sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe,flat edge (matt finish) bowl size 600mm x 450mmx220mm including waste coupling and waste pipe complete all as specified and directed.

S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/window/ceosetory windows & other Frames/chowkhat of size 60x35 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/ wheat husk) and non toxic additives ( maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/ mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S hold fast/ lugs or SS dash fasteners shall be paid for separately). Note : For WPC solid door/ window frames, minus 5mm tolerance in dimension i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Dismantling timber scantlings 40 Sqcm and over in section, in any position in framed work.

M&L for repairs to chajja/facia/edges of roof/ceiling by remove cover and loose concrete from main reinforcement using wooden mallets/wire brush/waterjet to complete expose the reinforcement in the distressed portion of concrete etc (All loose unsound and cracked concrete should be removed (plan area of concrete surface to be measured) at any height/floor applying epoxy based bond coat using brush and applying polymer concrete (not less than 20 mm thick) in the proportion of (1:3:1) one part of cement 3 part of sand and 1 part of 10 mm and down stone aggregate using 8-10 kg of acrylic based polymer per 50 kg bag of cement all as manufacturer's instruction complete all as specified and directed by Engineer-in-Charge. Note: The rates should include for necessary formwork, scaffolding and repair to work at any height/floor of building.

S&F Piano/continuous hinge of size 19 mm stainless steel complete all as specified.

S&F auto closing hinges 35 mm of 0 crank( KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position all as specified.

S&F Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs complete all as specified.

S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 200mm long matt finished complete fixed in position all as specified.

S & F in repair brass mortice lock, vertical type, size 100 mm and 4 lever type.

Material & Labour for providing and fixing stainless steel (Grade 304) railing/racks/articles made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing/racks with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab or walls with suitable arrangement.

Surface dressingn exc (not exceeding) 15 cm deep and getting out soft/loose soil complete all as specified and directed.

Excavation in trenches n.exc 1.5 Mtr wide and not exceeding 1.50 Mtr in depth for foundation, etc., n.exc 10 Sqm on plan in soft /loose soil; & getting out complete all as specified and directed by Engineer - in - Charge.

M&L for PCC as in foundation type D-2, 1:4:8, (40mm graded stone aggregate) all as specified and directed.

M&L two coats of cement base paint over a coat of white wash to new plasterd wall surface incl prepration of surface complete al as specified and directed by Engr-in-charge.

M&L hardcore of gauge n exc 63 mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface all as specified and directed by Engr-in-charge. (Broken bricks)

Returning, filling in, including spreading, leveling, watering and well ramming in soft/loose soil in layer not exceeding 25 cm thick complete all as specified and directed by Engineer - in - Charge.

Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including wateringcomplete all as specified and directed by Engineer - in - Charge.

Removal of excavated material to a distance n.exc 50m and deposited where directed at level n.exc 1.5m above the starting point all as specified .

S & F single lever type extended Sink/ Kitchen mixer cast copper alloy, chromium plated 15mm dia of bore complete all as specified and directed.

M & L granite (telephone black) work 16 to 20 mm thick (table rubbed and polished) in cooking platforms/counters/vanities/Skirtings/Window frames etc and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block (coloured red/yellow) any shape and size with grey cement and pigment confirming to IS 15658-2006 of 80 mm thickness M-40 Grade complete all as specified and directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete as specified and directed.

S & F for steel work in tubular trusses ,channels , including special shaped washer, plates nuts and bolts , including necessary drilling etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

S & F for Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed by Engr in Charge.

M&L Coloured 40 cm x 40 cm x 10 mm thick Non skid (Hi Traffic grip tiles) set jointed and pointed in neat cement slurry in floors over 20mm of screed bed in CM 1:4 including coping at edges in PCC Type B1, (1:2:4), complete all as specified and directed by Engineer in Charge.

Site Clearance in soft/loose soil complete all as specified and directed by Engr-in-Charge.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed by Engineer -in-Charge.

S&F 10mm dia MS round bar for fixing of chain link fencing with post complete all as specified and directed by Engineer -in-Charge.

Supply only chain link fencing galvanised mild steel hot dipped (IS-2721) of n. less than 3 mm dia of wire, mesh size as directed complete all as specified and directed by Engineer -in-Charge.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed by Engineer -in-Charge.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long and diameter of neck 5 to 10mm complete all as specified and directed by Engineer -in-Charge.

Form work to side of concrete in fdns, footing base, base of columns, side and soffits of plinth beam and simillar work complete all as specified and directed.

M & L for Form work to sides of columns complete all as specified and directed.

Rough finished Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide all as specified.

M & L for providing reinforcement cement concrete, 1:1:2 (Nominal mix) using 20 mm graded stone aggregate as in footing, foundation, beams, plinth beams, base for columns and mass concrete etc complete all as specified and directed.

M & L for providing reinforcement cement concrete, 1:1:2 (Nominal mix) using 20 mm graded stone aggregateas in columns complete all as specified and directed.

S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) all as specified .

M & L preparation of newly plastered surfaces and applying two coat of exterior weather coat paint over a coat of alkali resistant primer and putty finish on wall surfaces complete all as specified and directed.

M&L for two coats of acrylic emulsion distemper @ 10Sqm/Litre/2 Coat applied by roller over a coat of primer @10Sqm/Ltr/Coat and acrylic wall care putty (thickness vary from 1.5mm to 2.5mm as required for desired smoothness and levelling of surfaces in two or more layers) including preparation of newly plastered surfaces of wall by using following brands complete all as specified and as directed.

M & L preparation of surface of existing PCC flooring and apply 30mm thick colour mastic asphalt flooring (compitable for Gas Godown) as specified in IS 1195 (2002) and as per standard practice with bitumen priming coat over clean and dry surface after drying priming coat bitumen mastic laid in single layer and for skirting mastic should be laid in two or more layers complete all specified and directed by Engr in Charge.

M&L framed work conforming to Fe-290 grade E-165 as in door or gates of of angle or other section with gussel plate, rails, braces etc complete drilled for fixing of steel seating to door etc to be prepared for hanging steel, hanging door, fitting all as specified.

S&F 1mm thick Mild steel, plain, black sheet in hearths; covering to door shutters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required complete all as specified and directed.

Cutting openings, through brick walls built in cement mortar for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc. to store and rubbish not exc. 50m including forming jambs/under cills lintels etc by necessary plaster and brickwork in CM 1:3 complete all as specified and directed.

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, Guard bars of 12mm MS Square bar spacing n. exc 100mm including fixing of stainless steel and brass wire cloth in three layer (SS-Brass-SS) dia of wire not less than 0.45mm and mesh size n.exc 3mm specified for gas godowns fixed by brass screws/nut and bolts into frame complete all as specified and directed.

M&L for providing 50mm thick Cement concrete type B- 2, 1:2:4, (40mm graded stone aggregate) in floors, laid in panels n.exc 3.00m, joints to be filled with Bitumen mastic and surface should be chequered finish complete all as specified and directed.

M&L for Complete removal of existing treatment using steel wire brushing, scraping down smoke shoots, moulds and efflorescent salts and and finishing of walls surfaces of any description over 10cm girth and applying two coats of acrylic emulsion distemper @ 10Sqm/Litre/2 Coat applied by roller over a coat of primer @10Sqm/Ltr/Coat and acrylic wall care putty (thickness vary from 1.5mm to 2.5mm as required for desired smoothness and levelling of surfaces in two or more layers) by using following brands complete all as specified and as directed. Notes : - (i) The prepared surface after wall putty, the contractor will inform to the GE as well as Engineer in Charge for site inspection before applying further finishes work will be done only after writtem approval of prepared surfaces from the GE and Engineer in Charge.

M & L for complete removal of existing treatment of wall surfaces and applying two coat Acrylic Smooth exterior emulsion paint of required shade applied @ 1.0 ltr/10 sqm/coat over and including priming coat of exterior weather coat primer applied @ 2.20 kg/10 sqm) applied @ 2.20 kg/10 sqm) and wall care putty for external surfaces of walls (thickness vary from 1.5mm to 2.5mm as required for desired smoothness and levelling of surfaces in two or more layers) by using roller complete all as specified and directed. Notes : - (i) The prepared surface after wall putty, the contractor will inform to the GE as well as Engineer in Charge for site inspection before applying further finishes work will be done only after writtem approval of prepared surfaces from the GE and Engineer in Charge.

Supply and fixing of MS powder coated fly catchers machine with dimensions (L 24.5” X D 5.5” x H 17”), light source Philips actinic UV tubes (two tubes), capacity of 18 watt each of tube all as specified and directed by Engineer-in-Charge.

Supply, install, commissioning and testing of commercial Air curtain of size 40" x 78" unit for prevention of dust and conditioned air losses, single phase, 220V, 50 Hz made out of MS/ CRCA sheet of minimum thickness 18 guage finished with two coats of red oxide primer and final coat of synthetic enamel paint (oven backed) with MS CRC 18 guage square perforated suction grills, aluminium alloy fans and single phase electric motor nozzles etc complete with fittings and accessories so as to produce 1 - 1.5 m/sec air velocity at floor level for door opening complete all as specified and directed.

Supply, install, commissioning and testing of commercial Air curtain of size 46" x 78" unit for prevention of dust and conditioned air losses, single phase, 220V, 50 Hz made out of MS/ CRCA sheet of minimum thickness 18 guage finished with two coats of red oxide primer and final coat of synthetic enamel paint (oven backed) with MS CRC 18 guage square perforated suction grills, aluminium alloy fans and single phase electric motor nozzles etc complete with fittings and accessories so as to produce 1 - 1.5 m/sec air velocity at floor level for door opening complete all as specified and directed.

M&L for two coats of white wash to old surfaces on walls including preparation of surface with putty finishes complete all as specified and directed.

Taking down carefully aluminium point wiring (light, fan, socket or power, bell complete fitting such as sockets, ceiling roses, pendants, batten holders, regulators and making good the disturbed surfaces of wall, floors, ceiling in CM 1:3 etc complete all as specified and directed by Engineer - in - Charge.

M & L for concealed conduit point wiring complete for light/ fan on independent /combine board with cable 1.5 sqmm (Nominal area) FRLSH PVC insulated multistranded unsheathed copper conductor, drawn in and including PVC Concealed conduit pipe medium grade 20 mm dia, pipe hooks , elbows, juction covers and junction boxes, after cutting in wall chasing for conduits and sinking's for modular metal flush boxes suitable length and thickness for mounting, switches, sockets, fan regulator with modular cover plate with frame and making the good disturbed surfaces of wall in CM 1:3 with white wash or existing colour including provision of continuous earth continuity conductor along with point wiring of 1.5 sqmm copper PVC insulated cable for one light/ fan point controlled by one switch and connected to common earth dolly, complete all as specified and direced by the Engineer in charge.

M & L for concealed conduit point wiring complete for light/ fan on independent /combine board with cable 1.5 sqmm (Nominal area) FRLSH PVC insulated single core unsheathed copper conductor, drawn in and including PVC enamelled steel conduit pipe medium grade 20 mm dia, pipe hooks , elbows, juction covers and junction boxes, after cutting in wall chasing for conduits and sinking's for modular metal flush boxes suitable length and thickness for mounting, switches, sockets, fan regulator with modular cover plate with frame and making the good disturbed surfaces of wall in CM 1:3 with white wash or existing colour including provision of continuous earth continuity conductor along with point wiring of 1.5 sqmm copper PVC insulated cable for one light/ fan point controlled by one switch and connected to common earth dolly, complete all as specified and direced by the Engineer in charge.

All as per Ser item No 210.00 above but for one switch socket combination 5/6 amp on independent board complete all as specified and directed by Engineer - in - Charge.

All as per Ser item No 210.00 above but for one three pin socket outlet 5 Amp on same board with other switches complete all as specified and directed by Engineer - in - Charge.

All as per Ser item No 210.00 above but for one switch socket combinationt 6 pin 5/ 15 Amps on independent board with copper conductor 2.5 Sqmm complete all as specified and directed by Engineer - in - Charge.

S & F in replacement modular switch 5/6 Amps single pole one way,one module including modular cover plate with frame and metal flush box complete all as specified and directed by Engineer - in - Charge.

S&F in switch flame proof rotary type with termination box in LM6, 16A, sinle pole 250V complete all as specified and directed.

S & F in replacement modular switch socket combination 5 pin, type 5/6 Amps 5 in 1 flush type including modular cover plate and metal flush box with frame complete all as specified and directed by Engineer - in - Charge.

S & F in replacement modular switch socket combination 6 Pin, 5/16 Amps flush type including modular cover plate with frame and metal flush box complete all as specified and directed by Engineer - in - Charge.

S & F modular switch socket outlet 5 pin 5 Amps flush type complete all as specified and directed.

S & F LED luminaire 600mm x 600mm, 35/36 watt, 220V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by Engineer - in - Charge.

S & F modular stepped type, fan regulator, not less than 100 watt for ceiling fan 1200/ 1400mm sweep complete all as specified and directed by Engineer - in - Charge

S & F ceiling rose surface bakelite three terminals complete all as specified and directed by Engineer - in - Charge.

S & F in replacement of existing light fitting with LED batten with aluminium housing and integrated electronic driver, 20/22 Watt having input voltage AC 90-300V, 50 Hz, 6500K and all other accessories including connection with flexible cable copper conductor twin core of size 23/.2 mm upto ceiling rose/connector complete all as specified and directed by Engineer - in - Charge.

S&F in replacement of corner security light fitting LED TYPE 25 watt with all necessary acessories, Clear transparent acrylic cover, prewire suitable to operated on 230 volt 50 HZ AC & Supply and fixing to wall / on pole including fixing arrangement with suitable galvanized iron pipe 35 mm bore “light grade” brackets 2 mtr length bent to shape to obtained required shape including clamps, nuts / bots / washers etc connecting with suitable flexible copper wire of size 23/0.0076 complete all as specified and directed by Engineer - in - Charge.

S & F in replacement Water tight bulk head fitting, comprision of connector galvanised cast iron back plate, weather proof enamelled gallery, glass well and including 10 watt LED lamp all as specified and directed by Engineer - in - Charge.

S & F in replacement angle holder insulated body with back plate for conduit fittings complete all as specified and directed by Engineer - in - Charge.

S&F of flame proof cum water proof LED bulk head light fitting of 15W, IP66 protection of cast aluminium alloy material and heat and impact resistant toughen 'A' clear glass having anti corrosive epoxy powder coated finish complete with all accessories pre wired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed.

S&F LED light fitting 1x16/20 watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIB, zone 1 @ 2 and IP 65 protection with die cast aluminium hosing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc complete with all accessories prewired and in cluding connecting up with three core flexible copper conducror cable with suitable size complete all as specified and directed.

S & F sheet metal enclosure for double door DB made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted SPN 8 ways, 240 Volts, ISI marked, 200 amps bus bar stove enameled dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed by Engineer - in - Charge.

S & F sheet metal enclosure for double door DB made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted SPN 4 ways, 240 Volts, ISI marked, 200 amps bus bar stove enameled dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed by Engineer - in - Charge.

S & F in repair MCB ‘C’ series type suitable for 240 volts, AC supply 5 to 32 Amps, SPN with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer - in - Charge.

S & F in replacement MCB ‘B’ series type suitable for 240 volts, 10 KA, AC supply 20 Amps, single pole (SP) with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer - in - Charge.

Taking down and depositing of old unserviceable ceiling fans, sealing cable end, dismantling bledes of any size in MES yard complete all as directed.

M&L for Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as specified and directed.

Fixing only ceiling fan (MD supply) and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed.

S&F Heavy duty metal body exahust fan of 300mm sweep, 240 volt, copper winding, complete with louvers and shutter and mounted in suitable opening arrangement in wall and connecting up including 3 core PVC insulated PVC sheathed copper conductor flexible cable 24/0.2mm from ceiling rose to fan complete including breaking of brick wall and making a hole for fixing of exhaust fan including grouting of bolts and making good to disturbed wall in cement mortar(1 :4) white washing matching with existing colour etc. Note : Dismantling of old unserviceable fan shall be deposited in MES Store yard & rate includes in quoted amount.

M & L for Earthing complete with GI earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 Mtr deep below ground level ) with top edge of plate not less than 1.5 Mtr below ground level , connecting to GI earth lead 4 mm dia GI earth wire ,by means of bolts,nuts and washers of GI and protection by provision of GI medium grade pipe 15 mm bore including provision of concrete pit in PCC (1:2:4) type B1 using 20 mm grade stone aggregate with 40 mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 gs /Sqmm ) and frame of angle iron 25mmX25mmX6mm with lugs 02 Nos and with 6 mm dia MS bar handle made to shape ,GI light grade 20mm bore pipe for watering perforated at the bottom 1.75 meter long placed ontop edge of earth plate common salt and charcoal filling test point made out of 40 mmX 8 mm FI with fixing arrangement ,funnel, wire mesh and earth work inhard dense soil ,breturning filling in and removal of surplus soil to a distance not exceeding 50 mtrs all as per electric plate no.3 of SSR part 1 and connecting to earth test point including taking out unserviceable earthing with all acessories all as specified or indicated including testing on completion all as specified and directed by Engr -In - Charge. Note : (a) Outer edge of earth pit shall be 1 meter away from the outer edge of PCC chamber. (b) GI strip upto earth test point/ equipment is included in this item. (c) Water pipe upto earth pit shall be provided in slanting position as included in this item.

S&F in replacement sub main two single core PVC copper conductor unsheathed wire multi stranded 6 sqmm FRLSH including cutting chasing and grouting PVC pipe including Tee, Elbow, Bend etc and including 6.0 sqmm copper conductor single core wire connected by common earth all as specified. Including 20 mm dia concealed PVC conduit, medium grade, ISI marked complete all as specified and directed by Engineer-in-Charge. Note :- Two lengths of 6.0 sqmm cable and one length of 6.0 sqmm earth cable along with PVC conduit will be measured as one running length.

Supply and lay standard size brick subclass 'B' type complete all as specified and directed.

Supply and lay in replacement jointing and testing and commissioning in replacement of 16 Sqmm x 2 core XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty multi stranded aluminium conductor & PVC sheathed LT cable 1100 V grade conforming to IS-7098 laid in trenches/ducts/fixed on poles wall/laid under roads/paths/drain/culverts or passing through pipes complete all as specified and directed by Engineer-in-Charge.

S & F switch piano flush type 5/6 Amps single pole one way complete all as specified and directed by Engineer - in - Charge.

S & F in replacement switch socket combination 5 pin, type 5/6 Amps 5 in 1 flush type complete all as specified and directed by Engineer - in - Charge.

S & F in replacement switch socket combination 6 Pin, 5/16 Amps flush type complete all as specified and directed by Engineer - in - Charge.

S & F socket outlet 5 pin 5 Amps flush type complete all as specified and directed.

S & F stepped type, single socket fan regulator for ceiling fan 1200/1400mm sweep complete all as specified and directed by Engineer - in - Charge

S&F testing & commissioning of electric chimney 90 cm with feature of filterless & autoclean technology, oil collector tray, incuilt light, digital display, noise level, 46 dB 304W motor capacity with copper winding , extra installation kit, air suction capacity 1400 cum/h, input vol 220-240 V/50Hz and fitting in wall as connecaled or duct all as specified and directed

Taking down and painting of exhaust fan complete all as specified and directed.

S & F sheet metal enclosure for double door vertical DB made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted VTPN 4 ways, 415 Volts, ISI marked, 250 amps bus bar stove enameled dust and vermin proof IP 43 protection suitable for incorporation FP MCCB (V-Tech) N3 frame upto 250A, isolators and including give connection with wire and cable etc complete all as specified and directed by Engineer - in - Charge.

S&F in replacement MCCB TP & N 63 Amps with breaking capcity 16kA ,4 pole, Fixed TM and 415 volts AC Supply ISI marked complete all as specified and directed by Engineer - in - Charge.

S & F in repairs sheet metal enclosure for double door DB made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted SPN 8 ways, 240 Volts, ISI marked, 200 amps bus bar stove enameled dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed by Engineer - in - Charge.

S & F in repairs sheet metal enclosure for double door DB made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted SPN 4 ways, 240 Volts, ISI marked, 200 amps bus bar stove enameled dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed by Engineer - in - Charge.

Supply and lay in replacement jointing and testing and commissioning of 25 Sqmm x 4 core XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty multi stranded aluminium conductor & PVC sheathed LT cable 1100 V grade conforming to IS-7098 laid in trenches/ducts/fixed on poles wall/laid under roads/paths/drain/culverts or passing through pipes complete all as specified and directed by Engineer-in-Charge.

Supply and lay GI pipe 50 mm light grade for cable protection in walls trenches or any situation including clamp nut bolt etc complete all as specified and directed by Engineer-in-Charge.

S&F PVC connections 15mm size with PTMT nuts of length 600mm suitable for Hot/ Cold water application complete all as specified and directed.

S&F bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed of size 15mm bore complete all as specified and directed.

S&F gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed for GI pipes of size 15mm bore complete all as specified and directed.

M & L for concealed point wiring complete on independent /combine board with cable 2.5 sqmm (Nominal area) FRLSH PVC insulated multistranded unsheathed copper conductor, including conduit fittings after chasing in wall and making good the disturbed surfaces include sunken iron box 3mm thick bakelite sheet cover, pipe hooks elbows, brass screws washers with provision of earth cotinuity conductor of 2.5 Sqmm copper single core PVC FRLSH insulated cable controlled by one switch and connected to common earth dolly for one socket outlet 3 pin 15 Amps complete all as specified and directed.

S&F switch socket combination 6 pin 5/ 16 Amps flush type complete all as specified and directed by Engineer - in - Charge.

Supply and fix in industrial socket metal clad plug and socket with MCBs single pole 20 Amp complete all as specified and directed by Engineer - in - Charge.

S & F MCB ‘B’ series type suitable for 240 volts, 10 KA, AC supply 20 Amps, single pole (SP) with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer - in - Charge.

Fixing only electric water heater storage type ABS/ Plastic + sheet metal body with glass coating MS tank and heating element upto 2 KW capacity 25 litre, BEE 5 star rated complete with all accessories such as safety valve, thermo state, NRV, connection piece etc complete all as specified and directed by Engineer-in-charge. Note : Geyser will be issued from MES store yard as per Sch 'B'.

PAREEK AND COMPANY (BID ID -3292464)

KHANNA CONSTRUCTIONS (BID ID -3295012)