Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹91.3 LAccepted-AOC 137 3 STREET NO 4 RAJINDER NAGAR DEHRADUN UK 248001 | DEHRADUN | DEHRADUN | UTTARAKHAND | 248001 | L1 | Accepted-AOC L1 accepted | |
| 2 | L2₹91.7 L+₹41,530.21 (0.45%)Rejected-Finance BASEMENT PLOT NO 17 4657 21 ANSARI ROAD CENTRAL DELHI NEW DELHI 110002 | CENTRAL DELHI | DELHI | 110002 | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹98.6 L+₹7.3 L (7.98%)Rejected-Finance TP 117 2ND FLOOR MAURYA ENCLAVE PITAMPURA DELHI 110034 | DELHI | DELHI | DELHI | 110034 | L3 | Rejected-Finance Other than L1 |
| Sl No | Description | Qty | Unit | M/S ANIL KUMAR L1 | VINAY ENTERPRISES L3 | GLIBS CONSTRUCTION L2 |
|---|---|---|---|---|---|---|
| 1.00 | M&L racking out of old existing sealant compound and back up rod of the existing Dummy joints by special tools like cutting blades/machines, welding of joints by 2mm by using joint cutting blades of appropriate size straight and smooth edges. Joint shall be cleaned thoroughly with application of compressed air. Joints shall be made dry, vacuum cleaned and free of dirt, oil vegetation and other debris application of two coats of primer with thin brush by forward and backward movement at an interval of 30 minutes before placing the backup rod and pouring the sealant. Thereafter joints shall be filled with closed cell, medium density, cross linked polyethylene foam backup rod of upto 10-15 mm width for complete length of the joint, over it to be filled with polyurethane joint sealant meeting the requirements mentioned in BS-5212, BS 4254 and EN-141875- 2003 with minimum movement accommodation factor (MAF) of (+/-) 30%. 537,including removal of debris from site to outside ARC land complete all as specified & as directed. | 116 | Per 10 RM | 569 ₹66,004 Lowest | 1,250 ₹1,45,000 | 1,400 ₹1,62,400 |
| 2.00 | M&L racking out of old existing sealant compound and back up rod of the existing construction joints by special tools like cutting blades/machines, welding of joints by 2mm by using joint cutting blades of appropriate size straight and smooth edges. Joints shall be cleaned thoroughly with application of compressed air. Joints shall be made dry, vacuum cleaned and free of dirt, oil vegetation and other debris, application of two coats of primer with thin brush by forward and backward movement at an interval of 30 minutes before pouring the sealant Thereafter joints shall be filled with closed cell medium density, cross linked polyethylene foam backup rod of upto10-15mm width for complete length of the joint, over it to be filled with polyurethane joint sealant meeting the requirements mentioned in BS-5212, BS 4254 and EN-141875-2003 with minimum movement accommodation factor (MAF) of (+/-) 30%., complete all as specified and as directed. | 45 | Per 10 RM | 569.09 ₹25,609.05 Lowest | 1,250 ₹56,250 | 1,400 ₹63,000 |
| 3.00 | M&L racking out of old existing sealant compound, back up rod and filler board of the existing expansion joints by special tools like racker/cutting blades/machines , welding of joints by 2mm by using joint cutting blades of appropriate size, straight and smooth edges. Joints shall be cleaned thoroughly with application of compressed air. Joints shall be made dry, vacuum cleaned and free of dirt, oil, vegetation and other debris, application of two coats of primer with thin brush by forward and backward movement at an interval of 30 minutes before placing the filler board and pouring the sealant Thereafter joints shall be filled with pre-molded compressible polyethylene closed cell type filler board as specified , over it filled with closed cell medium density, cross linked polyethylene foam backup rod of upto 25-40 mm width for complete length of the joint. Finally filled with polyurethane joint sealant meeting the requirements mentioned in BS-5212, BS 4254 and EN-141875-2003 with minimum movement accommodation factor MAF of (+/-) 30%. complete all as specified and as directed. | 36 | Per 10 RM | 569.09 ₹20,487.24 Lowest | 2,200 ₹79,200 | 3,000 ₹1,08,000 |
| 4.00 | M&L for providing and laying self leveling elastomeric concrete in any depth and width as required for repair to cracks, corner spawling, pot holes, damaged edges of construction/ dummy/ expansion joint of cement concrete pavement/ slabs of Runway/ Taxi track as required and finished by means of trowels and flats alongwith application of a coat of special primer for elastomeric concrete after prepration of surface by removal of all loose material by disc cutter or by chiselling and cleaning by using air blower including all consumable materials, tools, labour etc including removal of all the spoil/ loose materials from site to outside MOD Land complete all as specified and as directed. | 0.5 | Cum | 91,569 ₹45,784.5 Lowest | 8,50,000 ₹4,25,000 | 3,50,000 ₹1,75,000 |
| 5.00 | M&L line marking for drive ways,parking ways and other applicable area as per the Drawing with PU Pigmented Glossy Coating, total system thickness up to 100 microns, complete all as specified and as directed. | 49 | Sqm | 769 ₹37,681 | 450 ₹22,050 | 250 ₹12,250 Lowest |
| 6.00 | M&L surface preparation and cleaning of existing concrete surface to make it free from dirt, dust, loose particles, wax, polish, efflorescence, laitance, and other contaminants by using special tools like grinding machine etc, treating the surface as per details mentioned below and complete all as specified and as directed. | 4,806 | Sqm | 1,859 ₹89,34,354 | 1,900 ₹91,31,400 | 1,800 ₹86,50,800 Lowest |
| 6.01Priming:- Providing and applying solvent free epoxy primer in two coats using a brush or short / medium pile roller at a time gap of 8 hrs by ensuring a uniform coating is achieved and compensated the differences in surface porosity, allowing second coat to dry for 24 Hrs, etc and complete as per manufacturer's specification. Make: M/s Bostik India Pvt Ltd/M/s Sika India Pvt Ltd/ M/s Asian Paints Ltd | ||||||
| 6.02Epoxy screed:- Providing and installing, high performance, epoxy resin flooring system by mixing all 3 components using heavy duty slow speed drilling machine fixed with mixing paddle, pouring of mixed material on the primed surface and spreading it using suitable trowel / pin rake trowel at 2mm thickness, gently rolling the spike roller to remove the entrapped air, etc and complete as per manufacturer's specification. Make: M/s Bostik India Pvt Ltd/M/s Sika India Pvt Ltd/ M/s Asian Paints Ltd | ||||||
| 6.03Top Coat:- Providing and installing, high performance, epoxy-Polyurethane resin flooring system by mixing all components including Pigment, using heavy duty slow speed drilling machine fixed with mixing paddle, pouring of mixed material on the primed surface and spreading it using suitable trowel at 2mm thickness, gently rolling the surface of Apcoflor SL EPU/Apcoflor SL2 EPU using spike roller to remove the entrapped air, etc and complete as per manufacturer's specification. Compressive Strength (ASTM C 579) 72 ±5% MPa Flexural Strength (ASTM C 580) 32± 5% MPa Tensile Strength (ASTM C 307) 18 ±5% MPa Make: M/s Bostik India Pvt Ltd/M/s Sika India Pvt Ltd/ M/s Asian Paints Ltd | ||||||
| 6.04Note:- All new substrate shall be allowed to cure and dry completely according to standard practice. The substrate shall be of M20 grade with VDF / IPS finish. The base should be hard & strong (minimum tensile strength of 1.5 N/Sqmm). The base should be free from random cracking & potholes. Flatness of the base should be checked for level to ensure that the specified thickness of treatment can be applied over the whole area. All the expansion & movement joints should be properly cut and maintained for terminations. The preferred method of surface preparation is by mechanical means. The substrate shall have moisture content of less than 5%. This product shall not be applied on the floors that are known to have rising moisture or have relative humidity of greater that 75% at the time of application. All application shall be not carried out where temperature less than 10 Deg C or above 40 Deg C. | ||||||
Tender Value
₹1.0 Cr
EMD Value
₹1.8 L
Closing Date
5 Mar 2026, 6:00 pmClosed
HQ CWE NO-2 DELHI CANTT
HQ CWE NO 2 DELHI CANTT 110010
PROVN OF EPOXY POLYURETHANE (EPU) FLOORING WORK OF HANGER AT ARC, MAHIPALPUR UNDER GE SOUTH WEST, NEW DELHI-03
2026_MES_751270_1
8662/SW/Token-38/2025-26
Limited
Civil Works
Item Rate
180 days
RETRICTED AREA
As per tender documents
9 documents required · 9 mandatory
₹1,000
GE SOUTH WEST DELHI
₹1.8 L
13 Mar 2026
5 Feb 2026
6 Mar 2026
5 Feb 2026
5 Mar 2026
26 Feb 2026
Per 10 RM
Per 10 RM
Per 10 RM
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.32 MB
BOQ_841427.xls
BOQ • 0.77 MB
38.pdf
Tender Documents • 0.73 MB
Amdt1.pdf
PDF • 0.35 MB
Amdt11.pdf
PDF • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .