ADDN/ALTN TO REFUELING HANGAR AT AF STN BAGDOGRA UNDER GE (AF) BAGDOGRA.

Amount

SCHEDULE 'A' PART- I (BUILDING WORKS) Note:- This Schedule is not pre-priced by MES and the pre- priced rate indicated as "Rs. 0.00" under Col- 5 signifies this fact only.

Construction of two Nos hanger doors (Front side Hangar door with 21.00 x 5.00 mtr clear opening including 1 Nos wicket gate and Rear side Hangar door with 6.00 x 7.00 mtr clear opening including 1 Nos wicket gate and balance portion of the Front and Rear side of the hanger covering as per drrawing) including all necessary foundation, errection , asembling, removing surplus/demolished materials, making good condition of distrurbed flooring etc as shown in drawings complete all as specified

Construction of POL store as shown in drawings for given plinth area complete all as specified.

SCHEDULE "A" PART-II (SITE CLEARANCE, SITE DEVELOPMENT AND EARTH WORK) Details of prepriced Schedule is given in Tender documents.

SCHEDULE "A" PART-III (INTERNAL ELECTRIFICATION) Details of prepriced Schedule is given in Tender documents.

SCHEDULE "A" PART-IV (SEWAGE DISPOSAL) Details of prepriced Schedule is given in Tender documents.

SCHEDULE "A" PART-V (EXTERNAL ELECTRIFICATION) Details of prepriced Schedule is given in Tender documents.

SCHEDULE "A" PART-VI (FENCING) Details of prepriced Schedule is given in Tender documents.

SCHEDULE "A" PART-VII (LIGHTENING PROTECTION) Details of prepriced Schedule is given in Tender documents.

SCHEDULE "A" PART-VIII (REFRIGERATION AND AIR CONDITIONING) Details of prepriced Schedule is given in Tender documents.

SCHEDULE "A" PART- IX (MISCELLENOUS ITEMS TO BE QUOTED BY BIDDERS) Note:- This Schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs. 0.00" under Col. 5 signifies this fact only.

Demolition of Plain cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified & directed.

Removing demolished material PCC etc exc 250m but n.exc 500m distance and depositing where directed n,exc 1.5m above the starting point complete all as specified.

M&L for providing and laying Pavement quality concrete work as in pavement/ hard standing of flexural strength 40 kg/per square centimetre in field using min 400 kg of cement per Cum and aggregate as per approved design mix, thickness of concrete 25 cm ( including necessary form work as required and bull nosing of edges, compacting curing and maintaining proper gradient and camber and finishing surfaces of concrete pavement) ccomplete all as specified..

M&L for Finishing surface of concrete roads, pavements, by brooming complete all as specified

Forming Contraction (Dummy) joints 50mm deep X 10 mm wide, filled with sealing compound Grade 'A' etc complete all as specified

Forming 20mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ of slab thickness 250mm etc complete all as specified .

ADDN/ALTN TO EXISTING HANGAR Dismantling old damaged CGI / PGI sheet roofing incl ridges fixed with 'J' bolts as in roof and segregating serviceable sheet for reuse and removing unserviceable from site complete all as specified

Dismantling AC corrugated or semi corrugated sheets including ridges as in roof and segregating serviceable sheet for reuse and removing unserviceble from site complete all as specified

S&F Camaouflage pattern pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mps as in roof covering/cladding to wall fixed with J hook in lieu of self tapping screws complete all as specified

S&F Camaouflage pattern pre painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified fixed with self tapping screws complete all as specified

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs etc any thickness including cover fillets complete all as specified and directed.

S&F for powder coated galvanised iron snap grid frame work of size 600x600mm for false ceiling comprising of Main runner 'T' section of size 38mm x 24mm x 0.40mm thickness, cross 'T' of size 29mm x 24mm x 0.3mm thickness and wall angle of size 24mm x 24mm x 0.43mm thick suspended with 4mm dia GI wire from purlin @ 1.20m c/c and fixed with 4mm thick designer ceiling boards complete all as specified and directed.

Demolition of Plain cement concrete (unreinforced) in ground floors and paving exc 15cm thickness above ground floors, complete all as specified

M&L 25 mm thick PCC (1:2:4) type B1 (12..5mm graded aggregate) as in sub base of floors etc complete all as specified and directed.

M&L machine cut Kota stone slab 20 to 25mm thick as in flooring over screed bed 20mm thick in CM (1:4) laid & jointed with cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete all as specified.

Taking down cement plaster of any description on brick work or stone masonry walls including rackingout joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L Kota stone slab 18 to 20mm thick over 10mm thick rendering in CM (1:4) as in riser of steps, skirting, dado and pillar and jointed with cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete all as specified.

M&L joint free non skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exc 0.18 Sqm but not exc 0.38 Sqm, over and including 20mm thick screed bed in Cement mortar (1:4) in flooring, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

M&L joint free non skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exc 0.18 Sqm but not exc 0.38 Sqm, over and including 10mm thick rendering in Cement mortar (1:4) in skirting, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

M&L joint free non skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm, over and including 20mm thick screed bed in Cement mortar (1:4) in flooring, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

Dismantling floor, hearth or wall tilling, stone slab etc including cement mortar bedding (but not backing), removing and rubbish off the premises complete all as specified and directed.

M&L glazed ceramic coloured tiles 350x 250x 7 mm/ 450X 350X 7mm in vertical surfaces over and including 10mm thick rendering in Cement mortar (1:4), set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed

M&L for PCC (1:3:6) type C-2 (using 40mm grade aggregate) 75mm thick as in plinth protection/path/paving laid in panels, finishing the top surface even and smooth without using extra cement complete all as specified and directed

Demolition of brick work/ stone masonry built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed

M&L for fly ash brick work old size bricks straight or curved on plan exceeding 6 mtr mean radius built in cement mortar (1:6) etc complete all as specified and as directed.

M&L 15mm thick rendering in cement mortar (1:6) on other than fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L 15mm thick rendering cement mortar in two layers, 1st coat 10mm thick in CM (1:6) and 2nd coat 5mm thick in CM (1:4) mixed with water proofing compund on other than fair faces of brick work or concrete surfaces, finished the surfaces even and fair without using extra cement complete all as specified and directed. Note:- Water proofing comound will be measured and paid separately as supply only.

Supply only Integral waterproofing compound.

M&L for preparation of wall suefaces and applying two coat of exterior weather coats over a coat of weather coat exterior primer for camouflage design necessary scafffolding complete all as specified and directed.

M&L for preparation of surfaces and applying 1.5mm thick Birla or equivalent wall putty to newly plastered surface and applying two coats of oil bound distemper complete all as specified and directed.

M&L for complete removal of existing treatment of surfaces and applying 1.5mm thick Birla or equivalent wall putty and applying two coats of oil bound distemper complete all as specified and directed.

M&L for preparation of old decorated plastered surfaces of walls including pilasters and cornises etc by using steel wire brushes, brooming down, etc and applying one coat of white washing complete all as specified and as directed.

Dismantling structural steel work including etc all as specified and as directed

S&F Steel work in Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates of grade Fe 410 -W (Gde- E- 250) quality- A complete all as specified.

M&L for preparation of new steel surface and applying two coats of synthetic enamel painting over a coat of red oxide zinc chrome primer over 10 CM width or girth complete all as specified.

M&L for preparation of old steel surface and applying one coats of synthetic enamel painting over 10 CM width or girth complete all as specified.

S&F mild steel iron work for wind tie including securing bolt and necessary drilling and similar work conforming to Fe -290 Gde E-165 complete all as specified.

Welding in repairs not exc 2.5 cm in length and thickness of metal to be welded exc 6mm but n. exc 9mm. all as specified.

Taking down chowkhat or frame of any description exc 1.5 Sqm but not exc 4.00 sqm each ( with out taking of shutters from the frame) complete all as specified.

Taking down chowkhat or frame of any description not exc 1.5 Sqm each ( with out taking of shutters from the frame) complete all as specified.

S&F powder coated aluminium sliding window shutters with frames (consisting of 02 Nos glazed shutters and 01 No gauze shutter) Series -D (25mm), 3 track sliding shutters, duly fitted with neoprene beading, glazing clips, locking device, heat absorbing glass 5.5 mm nominal thickness in glazed shutters, stainless steel wire mesh of 0.254mm nominal dia of wire and 0.95 mm average width of aperture in gauzed shutter and powder coated aluminum grill 4mm dia, 75 x 75mm aperture fixed with standard aluminum beading fixed in outer portion of the chowkat complete all as specified and as directed.

S&F Solid PVC door frame of size 50mm x 95mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. tube, supplying & Fixing in opening as complete all as specified

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet, reinforced with MS Square tube complete all as specified

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified.

S&F 100mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.

S&F 300 mm extruded section aluminium alloy anodised, sliding door bolt with hasp and staple and fixing clip of sheet and fixing bolt and nut complete all as specified and directed.

S&F aluminium anodised barrel tower bolt extruded section 200 mm long and fixed with MS screws complete all as specified and directed.

S&F 150 mm extruded aluminium alloy handle anodised fabricated type and fixed with MS screws complete all as specified and directed.

S&F in repair vitreous china squatting pan ‘Orissa pattern’ size 580x440mm white with integral foot rest including connection to 100mm bore 'P' or 'S' trap, and flushing pipe, anti-syphonage pipe, etc and including lime concrete bedding complete all as specified and directed.

S&F in repair PVC flushing cistern low level 10 Ltr capacity of approved make including fixing of brackets connection to WC with CI brackets and making good disturbed area complete all as specified and directed.

S&F in repair vitreous china WHB white with flat back of size 550x400mm with bracket including CP waste coupling and 32mm PVC waste pipe complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan pedestal pattern white including fixing with trap including PVC matching seat cover complete all as specified and directed.

S&F in repairs, Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed.

M&L for 18-20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like including pointing with admixture of pigment to match with shade of granite, laid over and including 20 mm thick cement mortar 1:4 including rounding the edges complete all as specifeid and directed.

S&F in repairs, Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified complete all as specified and as directed.

S&F in repairs, 15 mm bore chromium plated fancy type angle valve with elegant knob screwed down high pressure, with crutch or butter fly handle screwed for iron pipe or for unions complete all as specified and directed.

S&F in repairs, 15 mm bore chromium plated fancy type long body bib taps with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs, 15 mm bore chromium plated fancy type pillar tap for WHBS with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs, 15 mm bore chromium plated fancy type stop cock (concealed type) with long shank and cup with elegant knob screwed down high pressure, with crutch or butter fly handle screwed for iron pipe or for unions complete all as specified and directed.

S&F in repairs, brass chromium plated shower rose 125mm size with or without swivel joints, any size including fixing to steel pipe or union complete all as specified and directed.

S&F in repair 100mm dia PTMT grating complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nut at both ends with washer, 600mm long and fixed complete all as specified and directed.

S&F in repair cromium plated toilet paper holder with flat recessed type stainless steel fixed to walls with CP brass screws complete all as specified and directed.

S&F in repair for sheet glass assembly fancy type 450mm long and 125mm wide with CP double railing and fixed with brass screw complete all as specified and directed.

S&F in repair CP towel Rail 600mm long "D" type 20mm dia complete all as specified and directed.

S&F in repairs cromium plated soap dish fixed to wall with screw complete all as specified and directed.

Dismantling of old PVC water storage tank , removing from site including Supply and fixing new PVC water storage tank of 1000 Ltr capacity cylindrical, vertical with closed top with threaded cover hoisted and fixed in position and including ball valve high pressure of PTMT with epoxy coated Aluminum rod and high density plastic ball screwed for 25mm bore of iron pipe and 25 mm nipple suitable for HDPE water tank including making connection for inlet and outlet including removing from site complete all as specified and directed.

S&F in repair 20mm dia gun metal gate valve with iron wheel headed screwed both ends to iron pipe and fixed complete all as specified and directed.

Taking up or down 15mm dia bore steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed.

Taking up or down 20mm dia bore steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed.

Cutting chases, pinning in, making good to facing where required and pointing in Cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water pipe etc and making good, cutting not exc 10cm width or girth complete all as specified and directed.

S&F 15mm dia bore GI tubing medium grade fixed to wall or ceiling or laid in floors etc complete all as specified and directed.

S&F 20mm dia bore GI tubing medium grade fixed to wall or ceiling or laid in floors etc complete all as specified and directed.

S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, complete all as specified and directed.

S&F for 18/19 mm thick prelaminated particle board, interior grade, prelaminated on both sides with decorative choice lamination, fixed with screws to complete all as specified and directed.

M&L for Cement concrete type D-2 1:4:8 (using 40mm graded aggregate) as in foundations, filling and mass- concrete complete all as specified and as directed.

M&L for broken bricks hard core of gauge not exceeding 63mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and well rammed to a true surface all as specified and as directed

M&L for 100mm thick PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) as in sub base floor complete all as specified.

REFRIGERATION AND AIR CONDITIONING Supply and installation of Voltage Stabilizer with rated capacity 130-300 Volt 5 KVA operation range in auto mode with high and low voltage auto cutoff for Air cooled split/window air conditioner unit electric driven, single phase of capacity of 1.5/2 TR along with connected accessories, complete all as specified and as directed.

Supply and fix air dehumidifier along with digital humidistat of air flow 300 cum/Hr ,react heater -3.6 Kw electric driven single phase ,complete all as specified and directed.

EXTERNAL ELECTRIC SUPPLY S & F 4 Pole MCCB 125 Amp 50 Hz ,415 Volt with rupturing capacity 25 KA on existing LT panel incl necessary incoming and outgoing connections with suitable cable.

S & F 4 Pole MCCB enclosure incl necessary incoming and outgoing connections with suitable cable complete all as specified.

LIGHTENING PROTECTION S&F porcelain insulator of size 65X65X40 mm complite with one number GI stud bolts including nut & bolts etc complete all as specified.

INTERNAL ELECTRIFICATION Taking down carefully copper/aluminium point wiring (light,fan,socket or power) complete fittings such as switches,ceiling roses,pendents,regulators, sockets,tube light fittings etc, removing materials from site and making good disturbed surface of walls & floors etc.

Taking down DB's,Main Switch including MCB's etc all as directed.

Taking down carefully unserviceable sub main wiring of any size/core/type including making good the disturbed surfaces.

S & F ceiling fan of size 1200 mm sweep, high speed AC single phase 230/240 volt complete all as specified and as directed.

S & F exhaust fan of size 150 mm sweep, high speed AC single phase 230/240 volt complete all as specified and as directed.

S & F Flame proof exhaust fan of size 300 mm sweep, high speed AC single phase 230/240 volt complete all as specified and as directed.

S&F corner street light new generation energy saving & enviornmental friendly long life versatile pressure die-cast aluminium IP66 with high power LED as light source with acrylic cover of LED 15 Watt luminaire and suitable size of bracket with clamp complete all as directed

S & F MCCB distribution boards TPN, 6 way, 415 volts 50 Hz ,AC double door vertical loadline DBs are fitted with 100 Amps copper bus bar , shrounded neutral link ,earth link ,earthing suitable for TP G FRAME 01 incoming MCCB and SP/TP MCB's as outgoing complete all as specified and directed by Engr-in-Charge.Make-Indo Aien Cat Part No- 810437 or equivlanet model of CG/Legrand/L&T.

S & F fixed thermal and fixed magnetic setting MCCB ,100 Amp, 4 Pole breaking capacity 25 KA, 415 Volt, 50 Hz complete all and specified and directed by Engr-in-Charge.Make -Indo Asien,or equivlanet model of Legrand/L&T.

S & F MCB ,TPN of 415 volts ,AC ,50 Hz of capacity 6-32 Amps 10 KA rupturing capacity complete all as specified and as directed.

S & F MCB ,TP of 415 volts ,AC ,50 Hz of capacity 6-32 Amps 10 KA rupturing capacity complete all as specified and as directed.

S & F MCB ,Single pole of 240 volts ,AC ,50 Hz of capacity 6-32 Amps 10 KA rupturing capacity complete all as specified and as directed.

S & F MCB ,Single pole of 240 volts ,AC ,50 Hz of capacity 63 Amps 10 KA rupturing capacity complete all as specified and as directed.

M&L for Earthing complete with galvanized steel earth plate electrode 60 cm x60 cm x6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below ground level connected to galvanized earth lead wire of size 4mm dia by mean of bolts , nuts, check nuts and washer of galvanized iron or steel all as shown in electrical plate no 3 of SSR part I 2009 connected to earthing test point all as specified complete with excavation and earth work PCC pit with 50 mm thick RCC cover (grade M-15) having suitable handle (10 mm MS Rod) 20 mm dia GI medium grade watering pipe with GI funnel with wire mesh 15 mm bore GI Pipe (medium grade) for protection of earth lead conductor all as directed and testing on completion.

Taking down old flame proof rotary switch 16 Amp complete all as specified and as directed.

Taking Down defective flood light of any pattern from existing position/place, complete all as specified and directed.

G and G Infratech Private Limited

M/S R. K. INDUSTRIES

M/S JYOTI SHARMA AND SONS

SHRI S K BHATTACHARJEE

NARSINGH DEVELOPERS LLP