Additional improvent works at Murugan temple near ICDS Centre in Ward No 78, South Zone

Dismantling the damaged Brick or stone masonry in cement mortar, wall under 3m high up to 70cm thick including all labour charges etc complete.

Providing cast in situ cement concrete 1: 11/2 : 3 (one cement, one and half M.Sand and three coarse aggregate) using 20mm size HBBG metal for 23cm dia pile including cost of materials labour, hire charges for machinery for earth work for forming 30cm dia bore hole to the required depth before concreting excluding cost of steel reinforcement (Data for 4.50 RM)

Earth work excavation for foundation in ordinary soil, light black cotton sandy loam and dry silt including shoring, strutting, baling or pumping out water wherever necessary and refilling the sides of foundation with excavated earth in layers of 15cm thick and depositing the surplus earth at places as directed by the departmental officers with initial lead and lift etc complete as per the direction of dept officer

Plain cement concrete 1:4:8 mix (One cement four M.Sand and eight aggregate) using 40mm size ISS gauge HBBG metal including mixing, laying, consolidating,curing, cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification

Supplying and erecting for shuttering, including necessary supports for plane surface in foundation and basement for RCC column footings, Plinth beams, staircase steps, etc., using mild steel sheets of size 90cm x 60cm and 10gauge, stiffened with mild steel angle of size 25mm x 25mm x 3mm for boarding, supported by silver oak joists of size 10 x6.5cm, spaced at about 90cm centre and supported by casurina props of 10cm to 13cm dia spaced at 75cm centre to centre complete, complying with standard specifications and as directed etc., complete - 1 m2

Supplying and erecting for Centering for Column & Sunshade etc., using mild steel sheets of size 90cm x 60cm and 10gauge, stiffened with mild steel angle of size 25mm x 25mm x 3mm for boarding, supported by silver oak joists of size 10 x6.5cm, spaced at about 90cm centre and supported by casurina props of 10cm to 13cm dia spaced at 75cm centre to centre complete, complying with standard specifications and as directed etc., complete - 1 m2

Supplying, fabrication and placing in position of steel reinforcement using mild steel of Ribbed tor steel rods, for all RCC works as per the design given by the departmental officers including cost of steel and binding wore and all labour charges for cutting, bending & tying etc., complying with standard specifications

Providing and laying in position standardized concrete Mix M-20 Grade (1:1.5:3) in accordance with IS 456-2000 using 20mm and below graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without impairing strength and durability with about (5.0cum), 7730kg of 20mm machine crushed stone jelly and with about (3.3cum), 5156kg of 10 – 12mm machine crushed stone jelly and with about (4.79cum) 7670kg of Q.dust, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers – The Coarse and Fine aggregates to be used should comply with the requirements of IS Standards.

Plain cement concrete 1:2:4 mix (One cement two M.Sand and four aggregate) using 20mm size ISS gauge HBBG metal including mixing, laying, consolidating, curing, cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification

Brick work in cement mortar 1:5 mix using Fly Ash bricks of 230x110x70mm (8 3/4" x 41/4" x 23/4") including cost of materials and labour charges etc., as per standard specification - 1m3

Plastering with cement mortar 1:5 mix,12mm thick including cost and conveyance of all materials and labour charges for mixing the martor, and the surface rubbed for smooth and curing to required period, etc complete as per std Specification TNSS No.61,V,VI,(S4)3.

Supplying grill windows & Ventilators including cost of steel and labour charges for welding etc.,complete

Painting with first quality emulsion paint two coats over a priming coat including through cleaning, scrapping, removal of dust and including necessary plaster of paris putty works wherever required etc., completed.

Conveying the excavated earth, silt, brickwork, RR masonry etc from the site to 15km distance including loading and unloading etc complete

Add :- GST @ 18%