SW I.CTF: Raising of PF 1 & PF 2 from Rail level to High level, Provision of COP and passenger amenities at Chitgidda station under ADEN/VKB sub-division. SW II.CTF: Rehabilitation of Station Building at Chitgidda (CTF) Station in Sr.DEN/West jurisdiction.

C-DSR 2023 Reinforcement steel items 5935583.53 Below/P

F-DSR 2020 Horticulture and landscaping items 243557.75 Below/P

Item Breakup - A-DSR 2023 General Items

Item Breakup - B-DSR 2023 Cement Concrete Items

Item Breakup - C-DSR 2023 Reinforcement steel items

Item Breakup - D-DSR 2023 Structural steel items

Item Breakup - E-DSR 2023 Pipe Items

Item Breakup - F-DSR 2020 Horticulture and landscaping items

Item Breakup - G-USSOR 2021 Items

Using Soil Class SQ1 Total 1104700.00

Item Breakup - H-NS-ITEMS

High level platform wall with precast RCC Metre courter fort segments with design mix control concrete M 30 grade of concrete including transportation, hoisting and placing in position segments along with coping, excavation in trenches, laying of concrete bedding, back filling of trench, ramming joining of segments complete as per Headquarters Drawing No, GM(W)/SC/PF WALL/70/2022 SH. 1 of 2 with all contractors materials labour, tools, transportation, lead and lift taxes if any complete as directed by Engineer-in charge. Note 1. This item includes joining of segments. 2. 60% of the rate shall be paid in casting and proper curing of precast components at the project site and balance 40% will be paid on fixing the same in position in satisfactory condition. 3. Payments for Excavation, back filling, levelling course concreting, Precast coping slab shall be paid under relevant DSR 2021.

Cutting of grooves in 5mm wide 12mm Metre deep in flooring concrete for expansion and contraction in concrete and filling of grooves with sikaflex polyurethene sealant, including cost of materials and one coat of primer, with all contractors tools, plants, material, labours, complete etc., as per specifications and as directed by engineer in charge

Providing and laying Tactile tile (Detectable Sqm warning surface) flooring for visually impaired persons of approved make and size 300x300x60mm having water absorption quality of less than 0.5% and conforming to IS:15622 of all colours and shades for outdoor / indoor floors such as Platform, Circulating Area, Station building, Multi modal stations, etc., laid on 20mm thick base cement mortar 1:4 (1 cement:4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments with all Contractor's materials, labour, tools, plant, equipment, transportation, etc. complete as per the directions of Engineer- in-Charge.

Providing and Fixing of Stainless steel (SS Kg 304 grade) water valley gutter made of SS plate of 1.45 mm (tolerance +/- 0.045)thickness including welding, grinding, buffing, polishing and making required shape etc., and fitting to the existing steel structure with necessary stainless steel nuts & bolts, cutting holes , making connections for all heights with contractor's men, tmaterial, labour, tools, plants, transporting to site, with inclusive of taxes, crossing of track wherever necessary etc., specifications confirming to Railway standards complete as directed by Engineer-In - Charge at site. ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accesoriessuch as nuts & bolts, fasteners etc.,) SECUNDERABAD DIVISION-ENGG/SOUTH CENTRAL RLY

Providing and fixing unplasticised - PVC Numbers moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring confirming to IS:5382, leaving 10 mm gap for thermal expansion - Bend 87.5" - 160mm bend/elbow/shoe

Supplying and fixing 160mm dia PVC rain RM water pipes conforming to IS: 13592 Type A including jointing with sealing ring, leaving 10 mm gap for thermal expansion with contractors materials, labour, tools and plants, equipment at lead and lifts etc. Complete upto height of l 5m above rail level as directed by Engineer-in- charge at site

Preparation of Structural Arrangement Sqm drawings and Bar-Bending Schedule with all details for buildings/ structures etc, based on soil testing report, in Auto CAD for Approved GAD provided by Railways as required to suitable scale on film paper including check prints in colour with all contractors stationery, materials, labour consumables etc., complete as per specifications and as directed by Enginee- in-charge.

Selection of suitable site for drilling of bore Numbers well/tube well by suitable method for all diameters - consultancy charges for ground water survey report writing for recommended location including transportation for local survey. The survey will be done by suitable method. 05 nos suitable site will be identified, and best would be recommended for drilling. charges for suitable site selection 5500/5= 1100.00/-

Supplying, assembling, lowering and fixing RM in vertical position in bore well un- plasticized PVC bore well casing pipe (plan/perforated as per requirement at site) of required dia and pressure of 6kgs/sq.cm conforming to IS: 12818, including hire & labour charges fittings & accessories etc all complete, for all depts., as per direction of Engineer-in-charge (i) for 175mm (7 inches) nominal dia

Drilling of bore well of 165 mm dia RM (6.50inches) with suitable Hydraulic Rig for specified depth in all types of oil and rock mechanically with all contractors tools, plants, material and labour transportation etc. upto - Drilling of bore well of 165 mm dia (6.50 inches ) upto depth of 30 meters

Drilling of bore well of 165 mm dia RM (6.50inches) with suitable Hydraulic Rig for specified depth in all types of oil and rock mechanically with all contractors tools, plants, material and labour transportation etc. upto - Drilling of bore well of 165 mm dia (6.50 inches ) from depth 31 to 60 meters SECUNDERABAD DIVISION-ENGG/SOUTH CENTRAL RLY

Drilling of bore well of 165 mm dia RM (6.50inches) with suitable Hydraulic Rig for specified depth in all types of oil and rock mechanically with all contractors tools, plants, material and labour transportation etc. upto - Drilling of bore well of 165 mm dia (6.50 inches ) from depth 61 to 90 meters

Drilling of bore well of 165 mm dia RM (6.50inches) with suitable Hydraulic Rig for specified depth in all types of oil and rock mechanically with all contractors tools, plants, material and labour transportation etc. upto - Drilling of bore well of 165 mm dia (6.50 inches ) from depth 91 to 120 meters

Drilling of bore well of 165 mm dia RM (6.50inches) with suitable Hydraulic Rig for specified depth in all types of oil and rock mechanically with all contractors tools, plants, material and labour transportation etc. upto - Drilling of bore well of 165 mm dia (6.50 inches ) from depth 121 to 150 meters

Drilling of bore well of 165 mm dia RM (6.50inches) with suitable Hydraulic Rig for specified depth in all types of oil and rock mechanically with all contractors tools, plants, material and labour transportation etc. upto - Drilling of bore well of 165 mm dia (6.50 inches ) from depth 151 to 180 meters

Drilling of bore well of 165 mm dia RM (6.50inches) with suitable Hydraulic Rig for specified depth in all types of oil and rock mechanically with all contractors tools, plants, material and labour transportation etc. upto - Drilling of bore well of 165 mm dia (6.50 inches ) from depth 181 to 210 meters

Drilling of bore well of 165 mm dia RM (6.50inches) with suitable Hydraulic Rig for specified depth in all types of oil and rock mechanically with all contractors tools, plants, material and labour transportation etc. upto - Drilling of bore well of 165 mm dia (6.50 inches ) from depth 211 to 240 meters

Drilling of bore well of 165 mm dia RM (6.50inches) with suitable Hydraulic Rig for specified depth in all types of oil and rock mechanically with all contractors tools, plants, material and labour transportation etc. upto - Drilling of bore well of 165 mm dia (6.50 inches ) from depth 241 to 270 meters Total 2415855.22