Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹99.7 L
EMD Value
₹2.0 L
Closing Date
20 Oct 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
COMMISSIONER
NAGAR PARISHAD SAWAI MADHOPUR
Repair and maintenance Work of Old 10 MLD STP Soorwal.
2026_DLB_603623_1
9241-01
Open Tender
Miscellaneous Works
Percentage
60 days
SAWAI MADHOPUR
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,500
COMMISSIONER / MDRSL
₹2.0 L
Yes
NAGAR PARISHAD HALL SAWAI MADHOPUR
9 Oct 2026
9 Oct 2026
21 Oct 2026
9 Oct 2026
20 Oct 2026
9 Oct 2026
14 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | BSR ITEM | - | - | - | - |
| 2 | Providing & fixing UV stabilised fibreglass reinforced plastic sheet roofing upto any pitch including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/ bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra-violet stabilişer in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented,textured or smooth as specified. (B) 2mm thick flat. | 1,094 | SQM | 387.5 | ₹4,23,925 |
| 3 | Servicing of the DG set (as per OEM guidelines) during the DLP period shall be done by contractor including all consumables, actual charges shall be reimbursed to the contractor by department/client complete in all respect. | 40,000 | EACH | 2 | ₹80,000 |
| 4 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered Including fixing accessories such as nuts, bolts, fasteners etc.). Walkway Plate For PTU and Railing PTU Etc. | 361 | KG | 7,500 | ₹27,07,500 |
| 5 | Supply, fabrication, fixing and Testing of stainless steel (SS-316) Manual Coarse Bar screen with flat bar 50mm X 10mm, Spacing of bars 50mm suitable for mounting in channel of specified size with inclination not more than 45 degree and a movable covered containers of 1 cum capacity complete in all respect as per technical specification and the direction of the Engineer | 1,26,500 | NOS. | 2 | ₹2,53,000 |
| 6 | Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 metres Above 150 mm diameter | 740 | NOS. | 2 | ₹1,480 |
| 7 | Supply, Installation, Testing and Commissioning of CI Thimble Mounted Sluice Gate, Manually operated, Rising Spindle type. Sluice gates are as per IS 13349 Including all taxes, Freight, loading, unloading, fitting in position including Sluice gates are upward opening wall thimble mounted suitable for isolating the flow of sewer into out of the opening in the wall. It consists Gate frame, wall thimble, gate slide, shutter, seating/sealing faces The gates will be provided with pads on sides, top and bottom to mount the wedges. The gate shall be designed in such a manner, so that it can be operated at 2 meter head. Gate frame & Shutter of CI Grade IS 210 FG 260, Head Stock assembly bolts & SS ASTM A276 Type 316, Stem, Operating Nut SS ASTM A276 Type 316., Duly tested for tensile strength, Tested for over all dimensions as per approved GA drawing complete in all respect as per specification and direction of Engineer for following PEAK FLOW and depth up to 3M 7.6 MLD to 10 MLD | 1,69,900 | EACH | 1 | ₹1,69,900 |
| 8 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete: | 114.5 | KG | 4,000 | ₹4,58,000 |
| 9 | Providing and applying 2 coats of water based
cement paint to unplastered concrete surface at all
level after cleaning the surface of dirt, dust, oil,
grease, efflorescence and applying paint @ of 1 litre for 2 sqm including all material, labour,
scaffolding complete as per clause 800 of
MoRT&H specifications including all material,
labour scaffolding etc. | 67.8 | SQM | 8,000 | ₹5,42,400 |
| 10 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area 3 sq. metres and below | 221.5 | EACH | 12.56 | ₹2,782.04 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.04 MB
9241.pdf
Tender Documents • 1.03 MB
BOQ_1070338.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .