Retender Lot-14

Amount

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.

Providing & applying primer coat with Bitumen Emulsion(SS) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.75 kg/sqm using mechanical means

Providing and applying tack coat with Bitumen VG-10) using Bitumen distributor at the rate of 0.25kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.

Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm and 5.6 mm aggregates using viscosity grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable hot mix plant of appropriate capacity not less then 200 tonne per hour laying and rolling with a smooth wheeled/tandem roller finished to required level and grades

Providing and laying premix seal coat with HMP of appropriate capacity not less than 200 tonnes/hours using crushed stone chipping 6.70 mm size and penetration bitumen of suitable grade .

P&L of hot applies thermoplastic compound 2.50 mm thick i/c reflectorising glass beads @250 gms per sqm area thickness of 250 mm is exclusive of surfase applied glass beads as per IRC 35-2015 the finished surface to be level uniform and free from streaks and holes

Supply & fixing of raised pavement marker with made of plastic body of rpm/road stud shall be moulded from ASA or Hips are any other suitable material approved bye the Engineer . The rate shall include all material, labour ,T&P transportation,intallation and i/c all complete as per direction of the Engineer in charge.

M/S NAVEEN KUMAR YADAV (BID ID -5609766)

subhash singh (BID ID -5609473)

SHAILESH YADAV (BID ID -5599039)