out mild steel sheet 1.25 mm thick with size of frame 125 mm x 60 mm for doors

out mild steel sheet 1.25 mm thick with size of frame 125 mm x 60 mm for doors

S and F 30 mm thick flush shutters solid core constucted with block board core and plywood

S and F 35 mm 2nd class hard wood factory made Glazed and skeleton shutters

S and F 300 mm long mild steel ordinary rat tail rod pattern door spring including roller and roller plate

S and F floor door stopper of aluminium alloy body 140 mm cover plate and tounge

S and F Galvanized mild steel wire cloth 0.56mm nominal dia of wire and average

Sheet glass of ordinary quantity 3mm thick and glazing with oil putty in squares not exc 0.5 Sqm

S and F 3 mm thick Figured glass pin head type and glazing with oil putty

Hacking out old broken glass any thickness size quality or description from wooden frames

S and F 100 mm size butt hinges medium weight cold rolled mild steel complete

150 mm long aluminium anodized barrel tower bolts of extruded section complete

300 mm long MS sliding door bolt plate type with bright bolt not less than 12 mm dia

S and F for Mild steel pressed handles oval type stove enamelled black Size of handle in 125 mm

M and L Preparation of new steel surfaces of any description not otherwise described over 10cm width

Preparation of new wooden surface and applying two coats of synthetic enamel paint

Framed work such as grills gratings etc. with ends of bars shouldered and or riveted

Dismantling water tanks exc 500 and n exc 1000 and removing to store etc completed

S and F 1000 ltrs rotational moulded polyethylene water storage tanks cylindrical verical with closed top

S and F for Ball brass valves high pressure with polythene float and flynut complete

S and F for Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe

S and F in repairs concealed stop cock type CP with long shank cast copper alloy screwed down high pressure

S and F in repairs stop cock angle cock with long shank cast copper alloy screwed down high pressure

S and F in repairs bib tap cast copper alloy with capstan head CP fancy type with long body shank

Taking up or down steel tubing and connections incl cleaning for refixing or removal

Taking down 20 mm dia GI steel tubing and connection including cleaning for refixing or removal

S and F GI tubes medium grade with all fitting and fixed complete to walls ceilings or laid

M and L tubes 20 mm bore dia medium grade galvanised with all fitting and fixed complete to walls

S and F PVC connections 15mm size with PTMT nuts of length 450 mm

M and L for 75 mm thick Cement concrete type D 2 1.4.8 40mm graded aggregate

Cement concrete 1.2.4 type B 0 using 12.5mm graded stone aggregate

Providing and laying 60 mm thick factory made chamfered edge cement concrete paver block

Cutting holes in Depth of embedded portion of holdfasts or lugs measured from the face

M and L for 3 mm dia Plain mild steel wire galvanised class 3 as in detached work such as for mosquito nets

S and F for Hard drawn steel wire fabric cut to lengths bent to shape required and tying with and including mild steel wire

Excavation soft and loose soil in post holes or similar holes each n exc 0.5 cum getting out

M and L Cement concrete Type B2 1.3.6 40 mm graded aggregate as in foundation filling

M and L Mild steel work as in posts sturts and vertical colmns using ERW or induction butt welded tubes

M and L Mild steel work as in roof trusses including special shaped washers etc

S and F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm

Demolition Asbestos cement corrugated semicorrugated etc.

Dismantling wrought iron or mild steel work of any description

S and Fixing in repair 600 mmx450 mm bevelled edge mirror of selected quality glass

S and