Renovation works to the Port Admin building

Amount

CIVIL

Demolition of Steps with Tiles/granite and disposing the debris from the site including carting away etc as directed by the KPL Engineer direction

Earth work excavation for Ramp in all kinds of soil including soft, weathered and loose disintegrated rock (excluding hard rock) by manual or mechanical means including preparing bed of excavation to the required depth, level, graded camber as directed by the E.I.C, carting away / stacking the earth as directed including all men, materials and machineries, including cost of dozing, shoring and dewatering etc., Upto 1' ft depth complete as directed by the KPL Engineer direction. - Ramp

Providing and laying of Plain cement concrete (lean concrete) using mix M10 1:3:6 (1 cement, 3 sand, 6 graded stone aggregate 40 mm nominal size including curing etc, complete. - Ramp Base, top & Outer Duct Area as directed by the KPL Engineer direction

Providing and constructing 9" thk brickwall with locally available best quality bricks (Min Crushing Strength - 35 N/sqmm), laid to perfect line, level and plumb in Cement Mortar 1:4 (1 Cement : 4 Coarse Sand). Rate including scaffoldings, racking cut joints and weathering complete loading & unloading etc., as directed by the KPL Engineer direction - Entrance Ramp & Step

Filling the Centre portion with necessary Light weight filling material with compactation as directed by the KPL Engineer direction at All levels. - Ramp

Demolition of 9" thk curb wall/ low wall at various places from terrace and disposing the debris from the site including carting away etc., as directed by the KPL Engineer direction

Demolition of 4.5" thk Brickwall with Wall Tile at various Places and disposing the debris from the site including carting away etc., as directed by the KPL Engineer direction

Demolition of floor tiles including base mortar at various Places and disposing the debris from the site including carting away etc., as directed by the KPL Engineer direction.

Providing and constructing 9" thk brickwall at various Places with locally available best quality bricks (Min Crushing Strength - 35 N/sqmm), laid to perfect line, level and plumb in Cement Mortar 1:4 (1 Cement : 4 Coarse Sand). Rate including scaffoldings, racking cut joints and weathering complete loading & unloading etc., as directed by the KPL Engineer direction- Terrace and exteriors

FLOORING

Providing weathering course for roof slab (with brick jelly lime concrete to an average thickness of 75mm laid to necessary falls and slope with 20mm nominal size brick aggregate and 50% lime mortar 1:2 (1 Lime putty: 2 Surkhi) rammed and finished with gur and belgiri treatment complete including rounding off junction of roof slab with parapet wall with lime concrete and laying one course of pressed tiles of size 230 mm x 230 mm or of sizes available in local market with the prior approval of nodal officer's nominee with thickness not less than 12mm and set in C.M. 1:3 (1 cement : 3 clean coarse river sand) 12mm thick mixed with 2 % of integral water proofing compound by weight of cement including pointing the joints of tiles with cement mortar 1:3 (1 cement : 3 fine river sand) added with WPC and finished nearly, all as per the specification and as directed at site of works including curing all labour, materials, tools, equipments, transport, fuel, etc,. complete. - At Second Floor Level @ Terrace

Providing & laying of 18mm thk machine cut, pre-mirror polished, colour Granite Flooring in 6" wide pieces for grip fixed with necessary Mortar. The granite shall include polishing at all edges, rubbing, curing etc., as specified and as directed by engineer incharge. (Basic cost of Granite - Rs.180) - Entrance Ramp

Providing & laying of 18mm thk machine cut, pre-mirror polished, colour Granite Flooring fixed with necessary Mortar. The granite shall include polishing at all edges, rubbing, curing etc., as specified and as directed by engineer incharge. (Basic cost of Granite - Rs.180) - Entrance Steps

GROUTING & WATER PROOFING

Identifying the week areas on the surafce, joints, crack set and drilling holes of 10mm dia, fixing PVC nozzle with polymer mortar in the drilled holes. Pressure grouting cement slurry = expanding grout cebex 100 admixture with manually operated pumps through these nozzle till rejection. Removing the nozzles and sealing the holes and finishing flush with the surface using polymer repair mortar., as directed by the KPL Engineer direction.

Water proofing in Terrace- Cleaning the surface area with wire brush and water wash apply the brushbond roof guard is high build fibre reinforced seamless waterproofing render suitable for waterproofing of old and new roofs, it is a polymer base product applied in terrace surface area with two coats., as directed by the KPL Engineer direction.

The Identified Area is Clean and Free of Dust and other particals,etc,.Reinforcing steel must be primed with Nitozinc Primer immediately after cleaning.All surfaces including edges must be primed.All applications should be wet on wet, the primer must not be allowed to dry.For consistent performance the use of clean, dry sand is recommended.Minimum application temperature is 100C. For permanently immersed conditions consult the Official. Nitobond SBR is supplied in 1, 5 and 20 litre containers. Ceiling plastering with SBR., as directed by the KPL Engineer direction.

PAINTING

Painting to the existing stucco plastering wall with base coat Exterior primer is done at first and Rainfall designing (texture design) and 2 coat of Apex Paint including preparing the surface by water washing the existing surface with water peressure of 110Kg/Sqcm and Cracks will be filled with crack seal and holes and dent will be sealed with wall putty including the charges for Scaffolding, labour, material, transportation, tools etc., complete., as directed by the KPL Engineer direction - Exterior

Painting to the existing Vault roof surface with one coat of Primer and two coats of Ultima (Asian Paint) including preparing the surface by water washing the existing surface with water peressure of 110Kg/Sqcm including the charges for Scaffolding, labour, material, transportation, tools etc., complete., as directed by the KPL Engineer direction - Vault Exterior

Preparing the surface and painting with one alkali resistant primer coat and 2 coats of Premium emulsion paint and one additional coat using roller finish including preparation of surface, scrapping, sand papering, scaffolding etc complete as per the approved shade including allmaterials & labour from 'ASIAN PAINTS as directed by the KPL Engineer direction - Gutter

ROOFING

Supplying, fabricating, welding, fixing and installing of Polycarbonate Sheet for Roof Shelter with Structural Steel and required Enamel Painting 2 Coats as directed by Engineer-in-charge including all labour, material & tool, transportation charges etc., Complete as directed by the KPL Engineer direction.

Supplying & fixing of Rain Gutter as directed by Engineer-in-charge including all labour, material & tool, transportation charges etc., Complete, as directed by the KPL Engineer direction.

MISCELLANEOUS

Cleaning & removing the dust and other particle from the surface and grouting of silicon sealant inbetween the walls and aluminium frames all around with necessary Scaffolding all inclusive, as directed by the KPL Engineer direction

Providing and Fixing of 1.5" Dia. SS-304 Handrail as shown in the drawing with metal fabricated items like castings, gratings, hatchways, ladders, stairs, floor plates, handrail, and railings including all anchors, fasteners, hardware, and accessories necessary to complete work, as directed by the KPL Engineer direction - Ramp

Description of Work / Item(s)

Amount

INTERIOR WORKS

Prepartion of wooden paneling for veneer surface shall be thoroughly cleaned. All unevenness shall be rubbed down smooth with sand paper and shall be well dusted. Knots, if any, shall be covered with preparation of red lead made by grinding red lead in water and mixing with strong glue sized and used hot. Appropriate filler material with same shade as paint shall be used as per the KPL Engineer direction.

All exposed veneered, wood surfaces shall be finished with matt melamine polish to approved shade in the Ground floor and First floor of Port Admin Bulding. Appropriate polishing material with same shade as paint shall be used as per the KPL Engineer direction.

Providing and fixing of Roller Blinds made of 38mmx38mm aluminium extruded top rail with powder coated finished enabled with control Mechanism to be louvolite and chain must be metal. Stops to be fitted top & bottom to eliminate over-run and it should have straight edge finish. The blinds should be of approved manufactures and complete as per the approved shade and texture as directed by the KPL Engineer direction - Ground Floor

INTERIOR PAINTING

Preparing the wall surface and painting with 2 coats of Texture paint from 'ASIAN PAINTS - Royal playe internaional designer collection'., as directed by the KPL Engineer direction.

Preparing the False Ceiling surface by scrapping and removing the existing paint. Apply Anti termite in the prepared ceiling surface including material, labour, tools, scaffolding etc., as directed by the KPL Engineer direction, complete.

Preparing the wall & ceiling surface and painting with 2 coats of Premium emulsion Paint, as directed by the KPL Engineer direction.

MISCELLANEOUS

Providing and fixing of 4mm thk. 6" x 6" wide SS Plate 304 grade with etching design painted to colour as per approval for toilet Signage, as directed by the KPL Engineer direction.

Providing and fixing of 4mm thk. 9" x 9" wide SS Plate 304 grade with etching design painted to colour as per approval for toilet Signage, as directed by the KPL Engineer direction.

Providing and fixing of 4mm thk. 6" x 12" wide SS Plate 304 grade with etching design painted to colour as per approval for toilet Signage, as directed by the KPL Engineer direction.

RENOVATION WORKS TO THE PORT ADMINSTRATIVE OFFICE BUILDING INSIDE THE PORT - INTERIOR AND ALLIED WORKS

RENOVATION WORKS TO THE PORT ADMINSTRATIVE OFFICE BUILDING INSIDE THE PORT - CIVIL AND EXTERNAL PAINTING

TSCALE CONSTRUCTIONS AND INTERIORS

A P INTERIOR

Chandinee and Co

A P INTERIOR