SPL REPAIR TO BLDG NO T-48 (SM BARRACK) AT LPH AREA OF 2 JHAR AIR SQN NCC AND PROVN OF TOILET BLOCK (01 X 24 NOS IWC) AT 3 JHARKHAND BN NCC UNDER AGE B/R-I OF GE RANCHI

Amount

Dismantling of AC sheet (corrugated or semi corrugated etc) including AC ridges as in roof covering complete.

S&F prepainted galvalume aluminium zink coating GI based corrugated/ semi - corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering fixed with coach screw as per manufacturers instrution complete.

S&F for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall and ridge,fixed with self tapping srews complete.

Demolition of brick wk masonry built in cement mortar incldg all quoins arches pillars etc

M & L Brick wk with sub class ‘B’ bricks straight or curved on plan exc. 6m means radius in CM 1:6

M&L for half brick wall work with old size brick straight or curved on plan to any radius built in cement mortar 1:4 complete.

Taking down cement plaster of any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc .

M&L for rendering in cement mortar (1:6), 15 mm thick on fair faces of brick work / Concrete /stone surfaces finished even & smooth without using extra cement .

Description all as per above Item No 8 but in cement mortar (1:4) with applying water proofing compound (As per manufrature instruction) surface finished fair & even complete.(WPC will be paid saperatelly)

Supply only liquid water proofing compound.

Dismantling of wall and ceiling board any thickness/description including cover fillet .

S&F for Anodised Aluminium snap grid size 605x604mm frame work for false ceiling all as specified and directed by Engr-in- charge.

M&L for 4mm thick non asbestos fibre cement building designer ceilling board/E-board of size 600X600 fixed or laid/inserted to timber/GI/Aluminium framework with screws .

Taking down chowkat or frames with shutters (without taking off shutters from the frames) n.exc 1.5 Sqm each complete .

Description all as per above item No 14, but exceeding 1.5 Sqm and not exc 4 Sqm each.

Taking down shutters of any description area .exc 1 sqm but n exc 2 sqm each

Cutting holes in brick walls built in cement mortar for inserting hold fast and making good dismantled portion in cm (1:3) or cement mortar 1:2:4 Type B-1 exc half brick but n.exc one brick thick.

M&L Pressed steel frames 125 x 60 mm size of frame for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete.

M&L Pressed steel frames 105 x 60 mm size of frame for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete.

M&L Providing, cement concrete type B0 1:2:4 (12.5 mm graded aggreate) in filling of pressed steel frame , coping, fixing of hold fast etc similar work.

M&L 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides covered with decorative face veneer with lipping / frame to match.

S&F 2nd class hard wood 30 mm thick glazed & skelton shutter (any no of pannel) open rebated and prepared to receive glass gauge etc with sush bar edges to framing plain chamfered or receive glass gauge etc with sash bar edge of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc size of member of shutter as specified in SSR Part-I section 8 clause 8.24 (a).

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (style), with particle board core and 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm thick plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing.

S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, in opening as per specification and shown on drg in SSR Part-II 2020.

S&F, factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rails, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement, in the frame at site as per specification and shown on drawing in SSR Part-II (2020).

S&F Mild steel 300 mm long ordinary rat tial rod pattern springs including roller and roller plate complete all as directed.

S & F 100 mm Butt hinges medium weight medium cold rolled mild steel.

S&F 200 mm long aluminium anodised barrel tower bolt of extruded section complete.

S&F of 150 mm size mild steel pressed handles, chromium plated oval type.

M/L Steel window with side hung shutter including projecting type hinges with steel handle and steel peg stay, complete with glazing bars, dove tailed or welded (including two nos tower bolts 125mm in each leaf and one nos MS flate iron 25x 3mm handle in each leaf.

M/L Steel window with side hung shutter including projecting type hinges with steel handle and steel peg stay, complete without glazing bars, dove tailed or welded (including two nos tower bolts 125mm in each leaf and one nos MS flat iron 25x 3mm handle in each leaf.

S & F as in repairs Steel ventilator with top hung shutter including hinges steel peg stay, complete.

S&F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanized wire staples over steel windows and gauzed door.

Hacking out old broken glass any thickness, size, quality or description, from metal/wooden frame including punching or drilling out old glazing pins and removal of demolished material from site.

S & F 4mm thick plain sheet glass ordinary quality & glazing with oil putty n.exc 0.50 Sqm in each pane .

Dismantling timber scantling 40 sqcm and over in section in any position in un-framed work complete.

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates

M&L Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to fe.290.Gde-E-165

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. including brushing neat cement slurry with 3.0Kg of Cement per Sqm complete.

Dismantling floor, hearth or wall tiling includiing cemenet mortar bedding, removing serviceable tiles to store and rubbish off the premises

M&L for 15mm thick in screed bed or bedding layer of Cement Mortar in 1:6 for laying floor finishes.

M&L for rendering 10mm thick in Cement Mortar 1:4 on fair faces of brickwork or concrete surfaces to receive wall tiles finishes.

M&L light shade vitrified tiles 10 mm thick ( square / rectangular) area of each tiles not exceeding 0.36 sqm in as in floor etc. set & jointed in neat cement slurry & pointed in white cement to match .

Description all as per above item No 43, but on vertical surface as dado/ skirting.

M&L for non-skid joint free ceramic coloured tiles 7 to 8 mm thick ( square / rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in as in floor etc. set & jointed in neat cement slurry & pointed in white cement to match.

Demolition of stone slabs and tiles of any description or thickness bedded and pionted in any mortar asin floors, aprons etc.

M&L 18-20mm thick Granite slab (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including circular cutting,chamfering of edges as required .

M&L for machine cut kota stone slab 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including circular cutting,chamfering of edges as required.

Demolition of cement concrete (reinforcement) any description and position not other wise specifically.

M & L for providing RCC (1:2:4) type B-1 ( concrete cast -in- situ) using 20 mm graded stone aggregate as in llintels upto 1.5m clear span, cills, steps, copings etc.

M & L for RCC (1:2:4) type B-1using 20 mm graded stone aggregate as in slab supported on wall ,Chajjas,deck slab Shelves/tank staging etc.

Use & waste frame work to sides and soffits of floor or roof slab, chajjas not exc 200 mm thick (Horizontal or slopeing) making fair finished surfaces complete.

S&F TMT bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to

S&F TMT bars 6mm to 8mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to

Demolition of cement concrete of any description and in any position not otherwise specifically provided for (unreinforcement)

M&L for 75mm thick PCC type C2 1:3:6 (using 40mm graded stone agg) as in plinth protection/Path/floor finishing surface of concrete topping even and fair without using extra cement complete.

M&L for PCC type C2 1:3:6 (using 40mm graded stone agg) as in surface channels and drains.

M&L for extra forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra, including forms, moulds, mitred/ stopped end etc.

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregare as in foundation filling & mass concrete.

M&L for Sand filling under floors or in foundation including watering and consolidation for laying interlocking tiles complete all as specified and directed.

M& L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and no pigment in paths and hardstanding laid tightly over & including 25 mm thick dry sand cushion (compacted) and joint filled with dry sand(colour and pattern as approved by GE) complete all as specified and directed.

M&L for 75mm thick PCC type D2, 1:4:8 (using 40mm graded stone agg) as in sub base floor surface complete.

Taking up or down 15mm dia steel tubing and connection including cleaning for re-fixing or removal from site .

Supplying and laying 20mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Taking up or down 20mm dia steel tubing and connection including cleaning for re-fixing or removal from site .

Supplying and laying 25mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

20mm CPVC Brass Elbow for 'hot or cold' water supply connection and similar works etc,.

20mm CPVC Brass Tee for 'hot or cold' water supply connection and similar works etc,.

Cutting chases, pinning in, in brick walls making good to facings where required and pointing in cement mortar 1:3 to concealed water tubing and making not exc 10 cm girth.

Dismantling water tanks Capacity in Exc 500 & n exc 1000 litres and removing to store

S&F Rotational moulded polyethlene water storage tanks (cylindrical vergical with closed top) Capacity in 1000 litres hoisted and fixed in position all as specified in SSR Part I

S&F PVC Ball valves, high pressure, with polythene float & steel rod & fly nut complete, screwed for iron pipe or brass ferrule and fixed 25 mm bore pipe

S&F in repair Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 20 mm bore pipe.

S&F in repair, vitreous china pedestal type watre closet, white (excluding flushing cistern and flush pipe) but including connection to trap, and to flushing pipe, anti-syphonage pipe & EWC seat cover etc complete and making good to floor complete.

S&F in repair EWC sheet cover to match EWC complete.

S&F in repair 10 litres capacity PVC low level flushing cistern, white inlet ball valve, float and handle and connection to pipe including bracket .

S & F in repair vitreous china wash hand basin, white flat back of size 550 mm x 440 mm including brackets and making necessary arrangement for fixing .

S & F in repairs Aluminium anodised Tubular towel rail 20mm dia, D type, 60cm long between flanges

S&F in repair chromium plated health faucet for EWC with 1 meter PVC tube and hook complete all as specified and directed.

S&F in repair grating doom 100mm dia CP/PTMT min weight 25gm fixed in repair

S&F in repair 100 mm dia outlet PVC (SWR) floor trap plain with steel grating including jointing with solvent cement.

S&F in repair 110 mm bore PVC (SWR) pipes single socked in any length with rubber ring joints laid in trenches or in floors .

S&F in repair, 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in treches or in floors.

S&F in repair PVC (SWR) bends any radius 110 mm dia

S&F in repair PVC (SWR) 75 mm bore bends of any radius

S&F in repair 100mm bore PVC (SWR) vent cowl

Supply only of 15 mm pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe.

S & F in repair, 15 mm bore fancy type bib taps, chromium plated cast copper alloy, screwed down, screwed for iron pipe or for brass ferrule.

S&F in repairs stop valve/angle cock fancy type of 15 mm dia cast copper alloy chromium plated screwed down, high pressure, with crutch or butter fly handle long shank and cup (concealed type) screwed both ends for iron pipes or for unions.

Supply and fix in repair PVC connections 15 mm size with PTMT nuts of length 450mm.

S&F in repair Chromium plated toilet paper holder with flap of standard size as approved by GE.

S&F in repair in repairs Glass shelf assembly consisting of 5.5 mm thick sheet glass with CP brackets and CP frame Size 600mm long complete

S&F in repair CP Towel ring, square type including CP screws complete.

S&F in repair brass Chromium plated shower rose 125 mm size with or without swivel joints any size incl fixing of steel pipe or union .

M & L including preparation of new plastered wall surfaces and treating with two coat of oil bound distemper over a coat of primer over one coat of wall care putty .

Complete removal of existing treatment and applying two coat of oil bound distemper over a coat primer over one coat of wall care putty on old plastered wall surfaces.

M&L for applying Two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 ltr/10sqm over and including priming coat of exterior primer applied @ 0.90 ltr/10sqm over a coat of plaster of paris putty of 1mm thickness on new plastered wall surfaces.

M&L for applying Two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 ltr/10sqm over and including priming coat of exterior primer applied @ 0.90 ltr/10sqm over a coat of plaster of paris putty of 1mm thickness after complete removal of existing treatment on wall surfaces.

M&L, applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of newly steel surfaces of any description over 10cm width or girth not otherwise described.

Mild steel sheet eaves gutters, 150mm dia, thickness 1 mm galvanised class 3, half round with rounded edges

S&F Harrision rails , mild steel of anodised alloy with fixing brackets, stops, rollers incl endcaps etc.

Surface excavation n.exc 30cm deep and average 15cm deep and getting out in any type of soil.

Rough excavation not exc 1.5m deep and getting out in soft/ loose soil

Rough excavation exc. 1.5 m but not exc 3.0m deep and getting out in soft/ loose soil

Excavating in trenches, n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc, or for shafts, wells, cesspits, manholes, pier holes, etc n exc 10 sqm on plan and n.exc 1.5m in depth and getting out soft/loose soil.

Returning filling in including spreading levelling, watering and well ramming in layers not exc 25 cm thick in soft/loose soil.

Removing excavated materials not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point in soil.

M&L for loose filling with broken bricks aggregates of gauge 80 to 150 mm in soakage pits, soakage wells

M&L for broken stone hardcore of gauge n exc. 63mm, deposited, spread and levelled in layer n exc. 15cm thick, watered and rammed to a true surface complete.

M&L for PCC type E2 1:5:10 (using 40mm graded stone agg) as in foundation, filling and mass concrete.

M&L for 75mm thick PCC type C2 1:3:6 (using 40mm graded stone agg) as in plinth protection/Path/floor finishing surface of concrete topping even and fair without using extra cement complete.

Providing PCC jallies type B0,1:2:4 (12.5mm graded aggregate), 25mm thick, incl all moulding but excluding frame set in CM1:4.

M&L for 40mm thick cement concrete type B0 1:2:4 (20 mm graded aggreate) as in damp proof course etc similar work complete.

Applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square meter and blinding with clean dry sand @ 0.05 cum per sq. m

Use & waste frame work to soffits of suspended slab such as floor or roof slab, chajjas and similar work not exc 200 mm thick (Horizontal or slopeing) rough finished complete.

M&L for Chequered cement concrete tiles (300x300)mm, 25mm thick, set, jointed and pointed in neat grey cement slurry in floors incl 20mm thick screed bed or bedding layer of mortar in CM (1:6) for lying floor finishes and surface fair and even complete.

M & L, 10mm thick rendering on fair faces of brick work/concrete surface in CM (1:6) surface finished fair & even complete.

M & L, 15mm thick rendering on fair faces of brick work/concrete surface in CM (1:3) with applying water proofing compound (As per manufrature instruction) surface finished fair & even complete.(WPC will be paid saperatelly)

S & F 75mm Butt hinges extrucded aluminium alloy with galvanised mild steel hinge pin anodised and fixed, type C-21.

S&F of 100 mm size aluminium handles cast type anodised.

S&F 100 mm long aluminium anodised barrel tower bolt of extruded section complete.

S & F, 15mm bore galvanized steel water tubing medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors.

S & F, 20mm bore galvanized steel water tubing medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors.

S&F Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 20 mm bore pipe.

S&F PVC (SWR) pipes 110 mm single socketed in any length with rubberring joints, laid in trenches or in floors

S&F PVC (SWR) pipes 75 mm single socketed in any length with rubberring joints, laid in trenches or in floors

S&F PVC (SWR) bends any radius 110 mm dia

S&F PVC (SWR) bends any radius 75 mm dia

S&F PVC (SWR) junction single, (single T), equal or unequal, 100 mm dia

S&F PVC (SWR) vent cowl, 100 mm dia

M&L for 150mm dia reinforced concrete pipes, class NP2, laid and jointed complete with collars.

M&L for concrete bed to drain pipes including packing under, andhaunching against the sides of pipes after they are laid and testedf in cement concrete 1:4:8 type D2.

S & F vitreous china wash hand basin, white flat back of size 550 mm x 440 mm including brackets or erecting stand and making necessary arrangement for fixing.

S&F vitreous china squating pan 'ORRISA' pattern, size 580X450mm white with integral foot rest complete including connection to trap and to antisyphonage pipe etc complete including making good to floor.

S&F 110mm PVC (SWR) WC connector bent type

S&F 450mm long, 15mm dia, PVC connection pipe, with brass unions on both ends.

S & F 15 mm bore bib taps, chromium plated cast copper alloy, screwed down, screwed for iron pipe or for brass ferrule.

S&F 32 mm dia waste/flush pipe for urinal and WHB complete.

M&L, glazed ceramic coloured tiles of size 350 X 250 X 7mm/ 450 x 350 x 7 mm thick as in walls etc set and jointed in neat cement slurry and pointed in colour cement to match the tiles incl10mm thick rendering as screed bed or bedding layer of mortar in CM (1:4) for lying floor finishes and surface fair and even.

S&F Brass chromium plated tubular towel rail 20mm dia D Type, 60 cm long between flanges.

S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms)complete.

M&L 75mm dia PVC(SWR) floor trap, plain with grating including jointing with solvent cement complete.

M&L PVC(SWR) gully trap 125/110mm, setting and jointing with solvent cement complete.

M & L preparation of new surface of wall and applying three coat of white wash complete.

M & L preparation of new surface of wall and applying two coat of cement base paint, in any colour complete.

S&F 10 litres capacity PVC low level flushing cistern, white inlet ball valve, float and handle and connection to pipe including bracket .

S&F for Roof trusses (framed), trusses, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) incl distance pieces, cleats etc complete Fe 410-W(Gde E-250) quality-A.

M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings incl steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe 410-W(Gde E-250) quality-A

Bands/ Straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for security purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165

Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc complete all as specified and directed at site.

Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed.

Taking down carefully copper/aluminium Sub main wiring of any size from surface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed.

Taking down ceiling fan/ exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades complete all as specified and as directed.

M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following :-

One light point controlled by one, one way switch 5 Amps

One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator

One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board.

One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.

Description all as per item No 156 here in before but using 2.5 sq mm single core copper conductor cable FRLSH of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm FRLSH copper conductor cable PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly.

S & F for Ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as specified

S & F for Modular Switch piano flush type, single pole, one way, and 5/6 Amp single module complete all as specified.

S & F for Modular Switch piano flush type, single pole, one way, and 15/16 Amp single module complete all as specified.

S & F for Modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified.

S & F for Modular Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified.

S & F for modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed.

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable,one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit

S & F for sheet metal enclosure MCB DB TPN 4 way Vertical type with 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

S & F MCCB TPN 415 volts 25 KA suitable for fixing on DB of capacity 63 Amps with extended terminals complete all as specified.

S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

S & F for MCB Single pole and neutral rated capacity 32 to 40 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

S & F for MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

Labour only for refixing the celing fan/ Exhaust fan obtained from item No 5 above with replacement of unsv 3 core PVC insulated PVC sheated 3 core multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal including over hauling the fan, painting of ceiling fans complete with two coats synthetic enamel paint by spraying including filling cavities with filler after cleaning all dust etc. complete all as specified and as directed.

S & F for Decorative wall mounted luminaire made out of polycarbonate with unbreakable globe suitable for LED bulb and provision of LED bulb 10 watts complete all as specified and as directed. Make Havells , Philips, Bajaj.

S & F for LED mirror light 10 watts batten aluminium extruded with decorative end caps complete all as specified and as directed. Make- Bajaj Havells, Philips.

S & F for Energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired with warranty option of 5 years from date of installation and necessary mounting arrangements , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb complete all as specified and as directed. Make :-Havells Bajaj Philips

S & F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make :- Make Bajaj Philips, Havells.

Supply and laying & testing and commisioning LT underground cable 1100 volts grade, XLPE insulated and PVC sheathed heavy duty armoured with multi staranded aluminium conductor laid in pipes, trenches/ducts, on poles etc of size 2 core x 10 sqmm including earth work, sand cushioning, bricks for cable protection complete all as specified and directed

M& L for earthing complete with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.5 meter below normal ground level connected to galvanised earth wire 4mm dia by means of steel bolts, nuts, check nuts and washers all as shown in electrical plate No 3 of MES Schdule Part-I connected to earthing point and testing on completion with and including 15mm bore light grade GI protection pipe (upto 7.5 meter beyond outer edge of earth pit) PCC pit in mix 1:3:6 type C-1 with RCC 1:2:4 type B-1, 40mm thick cover reinforced with 8mm dia TMT bars 3 Nos both ways with lifting hook made out of 6 mm dia bar, watering arrangement with funnel and wire mesh and 20 mm bore medium grade GI watering pipe common salt and charcoal filling, necessary excavation and earth work complete

S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 35 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. Make :- Bajaj Philips, Havells

S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 60 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. Make :- Bajaj Philips, Havells

Supply and fix exhaust fan, steel body AC single Phase. 230 V of size 300 mm sweep with, blades, and frame all as specified and directed

Supply & laying tubes,'20 mm bore, medium grade', galvanized, with all fittings; laid in trenches. Note: Earth work to be included in the rate quoted

S&F Gun-metal, globe or gate valves, 20 mm bore, with iron wheel head, screwed both ends for iron pipe in trenches.

M/S DILIP KUMAR (BID ID -3177885)

M/S JAI MATA DEE CONTRUCTION CO. (BID ID -3178106)

Rajeev Ranjan (BID ID -3178364)

india trading company (BID ID -3178161)

Bihar traders (BID ID -3178088)