CA NO. GE AF NO.1/GUR-37/2025-26 COMPREHENSIVE MAINTENANCE TO B/R WORKS ALONGWITH MINOR REPAIR IN MAP QTRS, OFFR ENCLAVE, DSC QTRS, AIRFORCE SCHOOL PANCHWATI, MADHUR MILAN MAP QTR AREA, SNCOS MESS, AIRMEN MESS OF 13 BRD AND 16 BRD AT AF STNPALAM

Amount

Schedule-A (B/R Work)

M&L for repair to arresting the leakages of bib taps, pillar cock, stop cock, PVC connection, waste pipes, angle valve, concealed valve, Re-fixing of bottle trap etc by changing the washers or any other minor accessories complete all as specified and directed by Engr-in-Charge.

Repairing to adjustment the float valve without replacement of any part in the OHT of any size complete all as specified and directed by Engr-in-Charge.

M&L for repair to Removal of air lock/blockage of water in GI Tubing 15/20mm bore including taking down (if required) cleaning the pipe or fitting etc and refixing the same in position complete all as specified and directed by Engr-in-Charge.

M&L for Cleaning of water tank, duly removing all scale, dirt or mud, fungus etc and washing and flushing the tank with chlorine water for the capacity of tanks 500 litres to 1000 litres of RCC or PVC tanks including writing the letters on PVC or RCC tank as cleaned on duly mentioning date of cleaning with paint as directed by Engr-in-charge.

M&L for Cleaning of water tank, duly removing all scale, dirt or mud, fungus etc and washing and flushing the tank with chlorine water for the capacity of tanks 250 ltrs to 500 ltrs of RCC or PVC tanks including writing the letters on PVC or RCC tank as cleaned on duly mentioning date of cleaning with paint as directed by Engr-in-charge. NOTE FOR SL ITEM NOS 4 & 5: While cleaning any parts of the water tanks was broken / damaged the same shall be replaced by the contractor without any extra cost to the department.

M&L for rectification of leakage in 20/25mm bore CPVC pipe lines, joints and repair by re fixing serviceable fittings and replacement of unserviceable fittings such as socket, elbow, Tee, union, reducer etc complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 15mm dia concealed stop cock cover chromium plated with long screw down high pressure with crutch or butterfly handle screwed both end for iron pipe complete all as specified and directed by Engr-in-Charge.

S&F in repair brass concealed face to reuired size (full turn or half turn) to 15 mm dia angle cock/ stop cock/ bib cock/ sink mixer/ wall mixer/ WHB Mixer for short body/ long body, complete all as specified and directed by Engr-in-Charge.

S&F in repair CP concealed face cover to reuired size to 15 mm dia angle cock/ stop cock/ bib cock/ sink mixer/ WHB Mixer/ wall mixture for short body/ long body complete all as specified and directed by Engr-in-Charge.

S&F in repair brass concealed face to reuired size (full turn or half turn) to 20 mm dia angle cock/ stop cock/ bib cock/ sink mixer/ wall mixer/ WHB Mixer for short body/ long body complete all as specified and directed by Engr-in-Charge.

S& F in repair CP concealed face cover to reuired size to 20 mm dia angle cock/ stop cock/ bib cock/ sink mixer/ WHB Mixer/ wall mixture for short body/ long body complete all as specified and directed by Engr-in-Charge.

S&F 500 Litre capacity three layered rotational moulded polyethylene water storage tank (Cylindrical vertical with closed tap) hoisted and fixed in position including 20 mm dia GI pipe medium grade washout pipe of 450 mm long with plug and 20 mm dia GI pipe medium grade overflow pipe of 600 mm long with all fittings including dismantling/ taking down of the existing tank, complete all as specified and directed by Engr-in-charge.

S&F 1000 Litre capacity three layered rotational moulded polyethylene water storage tank (Cylindrical vertical with closed tap) hoisted and fixed in position including 20 mm dia GI pipe medium grade washout pipe of 450 mm long with plug and 20 mm dia GI pipe medium grade overflow pipe of 600 mm long with all fittings including dismantling/ taking down of the existing tank, complete all as specified and directed by Engr-in-charge.

S&F in repair 20 mm dia bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed by Engr-in-charge.

S&F in repair 25mm ball valves high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm - 210 gms) etc complete.

S&F in repair gun metal gate valves with iron wheel head 15 mm, complete all as specified and as directed by Engr-in-Charge.

S&F in repair gun metal gate valves with iron wheel head 20 mm, complete all as specified and as directed by Engr-in-Charge.

S&F in repair gun metal gate valves with iron wheel head 25 mm, complete all as specified and as directed by Engr-in-Charge.

S&F, jointing and testing galvanized steel water tubing 15 mm bore (dia) (ISI Marked), medium grade with all fittings such as bends, elbow, socket, reducer etc and fixed to wall with concealed pipe work, ceiling or laid in floors or any other situation including taking up or down existing steel tubing/ PPR pipe of any grade and connection includings making good the disturbed surfaces, complete all as specified and directed by Engr-in-charge.

S&F, jointing and testing galvanized steel water tubing 20 mm bore (dia) (ISI Marked), medium grade with all fittings such as bends, elbow, socket, reducer etc and fixed to wall with concealed pipe work, ceiling or laid in floors or any other situation including taking up or down existing steel tubing/ CPVC pipe of any grade and connection includings making good the disturbed surfaces, complete all as specified and directed by Engr-in-charge.

S&F, jointing and testing galvanized steel water tubing 25 mm bore (dia) (ISI Marked), medium grade with all fittings such as bends, elbow, socket, reducer etc and fixed to wall with concealed pipe work, ceiling or laid in floors or any other situation including taking up or down existing steel tubing/ CPVC pipe of any grade and connection includings making good the disturbed surfaces, complete all as specified and directed by Engr-in-charge.

S&F, jointing and testing galvanized steel water tubing 32 mm bore (dia) (ISI Marked), medium grade with all fittings such as bends, elbow, socket, reducer etc and fixed to wall with concealed pipe work, ceiling or laid in floors or any other situation including taking up or down existing steel tubing/ CPVC pipe of any grade and connection includings making good the disturbed surfaces, complete all as specified and directed by Engr-in-charge.

S&F, jointing and testing of CPVC pipes of outer dia 20 mm, SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors with all plain fittings such as bends, elbow, socket, reducer etc including taking up or down eixsting steel tubing/ CPVC pipe of any grade and connection includings making good the disturbed surfaces, complete all as specified and directed by Engr-in-charge.

S&F, jointing and testing of CPVC pipes of outer dia 25 mm, SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors with all plain fittings such as bends, elbow, socket, reducer etc including taking up or down eixsting steel tubing/ CPVC pipe of any grade and connection includings making good the disturbed surfaces, complete all as specified and directed by Engr-in-charge.

S&F in repair, 20 mm outer dia CPVC brass elbow female, complete all as speicified and directed by Engr-in-Charge.

S&F in repair 20 mm outer dia CPVC brass female Tee, complete all as speicified and directed by Engr-in-Charge.

S&F in repair 20 mm outer dia CPVC male brass threaded adaptor (MBTA), complete all as speicified and directed by Engr-in-Charge.

S&F in repair 20 mm outer dia CPVC Female brass threaded adaptor (FBTA), complete all as speicified and directed by Engr-in-Charge.

S&F in repair 25 mm outer dia CPVC male brass threaded adaptor (MBTA), complete all as speicified and directed by Engr-in-Charge.

S&F in repair 25 mm outer dia CPVC Female brass threaded adaptor (FBTA), complete all as speicified and directed by Engr-in-Charge.

S&F in repair 15 mm dia bore CP Bib cock, cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipes or for union and fixed complete all as specified and directed by Engr-in-charge.

S&F in repair 15 mm dia bore CP two in one bib cock, cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipes or for union and fixed complete all as specified and directed by Engr-in-charge.

S&F in repair of Wall mixture of telephonic 15mm bore dia cast copper alloy with chromium plated screwed down high pressure with or without lettered "Hot" or "Cold" with long screwed shanks and fly buts screwed for iron pipe complete all as specified and directed by Engr-in-charge.Make - Hindware, cera, Parryware, Marc

S&F in repair sink mixer of 15mm dia telephonic type mixer cast copper alloy fancy type chromium plated crutch and butter fly handle screwed down complete all as specified and directed by Engr-in-Charge.Make: Hindware, Cera, Parryware, Marc

S&F in repair basin mixer of 15mm dia cast copper alloy fancy type chromium plated crutch and butter fly handle screwed down complete all as specified and directed by Engr-in-Charge. Make: Hindware, Cera, Parryware, Marc

S&F in repair, 15 mm dia bore swan neck pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or “cold’ with long screwed shank and fly nuts, screwed for iron pipe and fixed complete all as specified and directed by Engr-in-charge.

S&F in repair 125 mm fancy type shower rose brass chromium plated with CP arms of 30 to 60 cm long for 15mm bore GI pipe complete all as specified and directed by Engr-in-charge.

S&F in repair of 15mm dia telephonic hand shower of long 200 mm to 300 mm cast copper alloy fancy type screwed down complete all as specified and directed by Engr-in-Charge.Make: Cera/ Marc/ Hindware

S&F in repair 15 mm dia bore stop valve, cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipes or for union and fixed complete all as specified and directed by Engr-in-charge.

S&F in repairs 15 mm dia bore stop valves cast copper alloy chromium plated fancy type with long shank & cup (concealed type) complete all as specified and directed by Engr-in-charge.

S&F in repairs 15 mm dia bore cast copper alloy chromium plated fancy type angle cock with long shank & cup complete all as specified and directed by Engr-in-charge.

S&F in repair Health Faucet with 1.00 mtr long SS tube and stand/ hook, complete all as specified and directed by Engr-in-charge. Make : Cera, Hindware, Parryware, Marc

S&F in repair cast copper alloy chromium plated jet spray with 1.5mtr long as per sample for EWC complete all as specified and directed by Engr-in-charge.

S&F in repair of PTMT bib tap suitable for 15mm dia pipe of any colour screwed down, screwed for iron pipe or brass ferrule complete with check nut 15mm bore complete all as specified and directed by Engr-in-charge.

S&F in repair 15 mm dia bore PTMT 2 in 1 bib cock suitable for 15mm dia pipe of any colour screwed down, screwed for iron pipe or brass ferrule complete with check nut 15 mm bore, complete all as specified and directed by Engr-in-charge.

S&F in repair, 15 mm dia bore Pillar taps of PTMT, fancy type, any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms), with long screwed shank and fly nuts, screwed for iron pipe and fixed complete all as specified and directed by Engr-in-charge.

S&F in repairs 15 mm dia bore, Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms), complete all as specified and directed by Engr-in-charge.

S&F in repair, swivel shower of PTMT any colour for fixing with 15 mm pipe (minimum weight 40 gms), complete all as specified and directed.

S&F in repair PTMT Health Faucet with 1.00 mtr long tube and stand/ hook complete all as specified and directed by Engr-in-charge.

S&F in repair PTMT flush handle with adjustable lever and hook for low level flushing cistern complete all as specified and directed by Engr-in-Charge.

S&F in repair PTMT waste coupling 31/32mm bore complete all as specified and directed by Engr-in-Charge.

S&F in repair vitreous china squatting pan “Orissa pattern” of size 580mmx440mm ‘white’ with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe anti syphonage pipe etc necessary concrete bedding and making good the disturbed surfaces complete all as specified and directed by Engr-in-charge.

S&F in repair vitreous china wash down water closet pan (pedestal pattern)or white (excluding flushing cistern and flush pipe) including connection to drain or outgoing pipe and flush pipe anti syphonage pipe etc and making good the disturbed surfaces of floor complete all as specified and directed by Engr-in-charge.

S&F in repairs 10 ltrs capacity PVC low level flushing cistern white with inlet, float valve and handle including bracket with 32 mm dia PVC pipe 600 mm long complete all as specified and directed by Engr-in-charge.

S&F in repair water closet seat cover white colour closed pattern with flat bottom covered and mild steel chromium plated hinging device complete all as specified and directed by Engr-in-charge.

S&F in repair vitreous china wash basin, white, flat back of size 550 mm x 400 mm fixed over cast iron cantilever brackets of 32 mm dia, brass waste coupling and including fixing of tap, waste fitting and union complete all as specified and directed by Engr-in-charge. Note : Pillar tap only shall be measured separately under respective item in this schedule and balance all shall include in the quoted rate..

S&F in repair PVC connection 15 mm dia and 450 mm long with both end brass fly nut complete all as specified and directed by Engr-in-charge.

S&F in repair 32 mm bore of pipe low density (LDPE) of pressure rating 6 Kg per Sqcm fixed to wall or floor etc including fittings complete all as specified and directed by Engr-in-charge.

S&F in repair brass chromium plated bottle trap of 32mm bore for wash hand basin with inlet and outlet and screwed for pipe or connection including necessary packing, unions and cap fixed complete all as specified and directed by Engr-in-charge.

S&F in repair 32mm dia waste fitting brass chromium plated for basin with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engr-in-charge.

S&F in repair of Sink with draining board made of stain less steel 1 mm thick kitchen or laboratories with plugs, washer and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 1050x 460x bowl size 410x330x160mm complete all as specified and directed by Engr-in-charge.

S&F in repari of Sink with out board made of stain less steel 1 mm thick kitchen or laboratories with plugs, washer and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495x 420x bowl size 410x330x160mm complete all as specified and directed by Engr-in-charge.

S&F in repair of PVC siphon flush kit with all fitting accessories single flush tank kit for cistern tank, complete all as specified and directed by Engr-in-Charge.

S&F in repair of floor /wall mounted western toilet/commode S/P trap square type seat in built in single pices white water closet (EWC) including complete all fittings cmplete all as spd and directed by EIC Make:Linum Ceramic/Cera/Hindware

M&L for PVC (SWR) nahani trap of 75 mm diameter of outlet, with PVC 150x150 mm size openable at center, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete in all respect as specified and directed.

S&F in repair high quality Stailess steel (Grade 304) anti-cockroach and reptile-resistant drain gratings (Jallis) for bathroom/ Kitchen flor drains of size 4 to 6 inch in dia. The gratings shall feature a self-closing flap mechanism to prevent the entry of cockroaches, lizards, and other pests while allowing smooth water flow. They must be corrosion-resistant, durable, and compatible with standard drain sizes. The design should allow for easy cleanign adn maintenance. (Note:- only ISI Marked or equivalent certified producrts shall be accepted).

S&F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with adhesive joint laid in trenches or in floor including taking down the existing unserviceable pipe complete all as specified and directed by Engr-in-charge.

S&F in repair 75/ 63 mm bore PVC (SWR) pipes single socketed in any length with adhesive joint laid in trenches or in floor including taking down the existing unserviceable pipe complete all as specified and directed by Engr-in-charge.

S&F in repair 32/ 40 mm bore PVC (SWR) pipes single socketed in any length with adhesive joint laid in trenches or in floor including taking down the existing unserviceable pipe complete all as specified and directed by Engr-in-charge.

S&F in repair 110 mm bore dia PVC bend, complete all as specified and directed by Engr-in-charge.

S&F in repair 75/ 63 mm bore dia PVC bend, complete all as specified and directed by Engr-in-charge.

S&F in repair 32/ 40 mm bore dia PVC bend, complete all as specified and directed by Engr-in-charge.

S&F in repair 110 mm bore dia PVC (SWR) junction single, (Single T) equal or unequal with access door, complete all specified and directed by Engr-in-charge.

S&F in repair 75/ 63 mm bore dia PVC (SWR) junction single, (Single T) equal or unequal with access door, complete all specified and directed by Engr-in-charge.

S&F in repair 32/ 40 mm bore dia PVC (SWR) junction single, (Single T) equal or unequal with access door, complete all specified and directed by Engr-in-charge.

S&F in repair 32 mm bore dia PVC waste pipe fixing to sink/ WHB coupling, complete all as specified and directed by Engr-in-Charge.

S&F in repair 32 mm bore dia PVC roll waste pipe fixing to sink/ WHB as per requirement, complete all as specified and directed by Engr-in-Charge.

S&F in repair Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern, complete all as specified and directed by Engr-in-Charge.

S&F in repairs by taking down wooden/ PVC door shutters, repairing, tightening of hinges or changing the position of hinges adjustment of tower bolts sliding bolt etc, replacement of fittings and refixing on the same opening complete all as specified and directed by Engr-in-Charge. (Note:- New hinges, if required will be measured and paid under separate item).

S&F in repairs by taking down aluminium door shutters exceeding 1.5 Sqm and not exceeding 4.00 Sqm of any description, tightening of all screws, repair of floor spring with necessary minor fittings and refixing in the same opening complete all as specified and directed by Engr-in-Charge.

S&F in repairs by taking down aluminium window/ventilator shutters not exceeding 1.5 Sqm of any description, tightening of all screws replacement of hinges, necessary fittings and refixing in the same opening complete all as specified and directed by Engr-in-Charge. (Note:- New fittings if required will be measured and paid under separate item).

S&F in repairs of loose glass pane having area n exc 0.25 sqm of steel /wooden window including re fixing in position with glass putty complete all as specified and directed

Resecuring or easing & adjusting of shutters of any description not exceeding 2 Sqm in each pane and refixing in same opeining complete all as specified and directed by Engr-in-Charge.

Resecuring or easing & adjusting of shutters of any description not exceeding 1 Sqm in each pane and refixing in same opeining complete all as specified and directed by Engr-in-Charge.

S&F in repair aluminium alloy door seal of size 1 metre long fixed to wooden doors complete all as specified and directed by Engr-in-Charge.

S&F in repair 300 mm ordinary rat tail rod pattern, brass door spring including roller & roller plate fixed complete of any size complete all as specified and directed by Engr-in-Charge.

S&F in repair aluminium floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring and rubber shoe with over all length of cover plate 140mm complete all as specified and directed by Engr-in-Charge.

S&F in repair kitchen plate rack of size 31"x30"x10 to 12" inch made of stainless steel 1 mm thick fixed on the wall with plugs, nuts & washers, complete all as specified and directed by Engr-in-charge.

S&F in repair aluminium anodised tubular towel rail of 20 mm dia D type, 60 cm long between flanges complete all as specified and directed by Engr-in-charge.

S&F in repair bevailed frameless wall mounted mirror colour of silver B fixed with wall bolting arangement of size 600 x 900 mm of good finish, complete all as specified and directed by Engr-in-Charge.

S&F in repair 6 to 8 mm thick electrical looking mirror of rectangular/ square/ oval/ circular shape of size exc 0.27 sqm but not exc 0.45 sqm with three light mode as required including all fittings and make good of all surface, complete all as specified and directed by Engr-in-Charge.

S&F in repair toilet paper holder of size 13 cm x 13 cm x 7 cm chromium plated of glossy finish fixed to wall with chromium plated brass screw complete all as specified and directed by Engr-in-charge.

S&F in repair Soap dish of brass chromium plated of oval shape of cost not less tha Rs 150.00 fixed to wall with brass chromium plated screws complete all as specified and directed by Engr-in-charge.

S&F in reppair stain lesssteel curtain rod of 20/25mm dia fancy type including MS bracket, side knob, corner bracket etc complete all as specified and directed by Engr-in-charge.

S&F in repair, MS moritce lock 4 levers of vertical type size 100mm, complete all as specified and directed by Engr-in-charge

S&F in repairs, cast iron drawer pulls 3 screw plate with fixed pulls 80mm to 100mm long, complete all as specified and directed by Engr-in-charge.

S&F in repairs, brass drawer handles fancy type projection drop (50mm to 65mm) on screwed plate, complete all as spd and directed by Engineer in Charge.

S&F in repair, knobs for cub board fixed in nut screw and washers of brass, complete all as specified and directed by Engr-in-Charge.

S&F in repair, hasp and staples 100mm long alluminium anodised, complete all as specified and directed by Engr-in-Charge.

S&F in repair, gate and shutter hooks of and eyes of 75 mm brass wire plated type I, complete all as specified and directed by Engr-in-Charge.

S&F in repairs, wooden beading of length 1 mtr to 1.2 mtr and 10 to15 mm thick, to fixing of wire mesh, complete all as specified and directed by Engr-in-charge.

S&F in repairs, alluminium beading of length 1 mtr to 1.2 mtr and width 10 to15 mm of 2 mm thick, to fixing of wire mesh and glass pane, complete all as specified and directed by Engr-in-charge.

S&F in repair, polyrubb black glazing rubber beading to fix glass and width 10 to 20mm and glass pane complete all as specified and directed by Engr-in-charge.

S&F in repair, corner glass shelf of 300 mm long fixed on the wall with nuts & washers, complete all as specified and directed by Engr-in-charge.

S&F in repair, glass shelf 450 mm long on wall with screws and making good surface of wall, complete all as specified and directed by Engr-in-charge.

Taking down chowkat or frame with shutter (without taking out shutter from the frame) not exc 1.50 Sqm each as doors, windows & ventilators etc. and removal from site, complete all as specified and directed by Engr-in-charge.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube in opening as per specification & drawing mentioned in SSR, complete all as specified and directed by Engr-in-charge.

S&F for 30 mm thick factory made solid panel PVC door shutter confirming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 gauge thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded PVC `C' channel of size 30x50mm forming styles and 5mm thick 75mm wide PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross PVC sheet as gap insert for top rail and bottom rail paneling of 5 mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of 'C' channel using PVC solvent adhesive complete as per manufacturers specifications & drawings and complete all as specified and directed by Engr-in-charge.

S&F in repair, aluminium anodised 100 mm long Butt hinges with galvanised mild steel screws complete all as specified and directed by Engr-in-charge.

S&F in repair of aliminium anodised barrel tower bolts, 150 mm long complete all as specified and directed by Engr-in-charge.

S&F in repair of 100 mm extrded aluminium alloy handles, fabricated type anodised, complete all as specified and directed by Engr-in-Charge.

S&F in repair of 150 mm extrded aluminium alloy handles, fabricated type anodised, complete all as specified and directed by Engr-in-Charge.

S&F in repair aluminum alloy sliding door bolt 300mm long with hasp, staple (bolt type) adnd fixing clips of sheets, cast of exctruded sections and fiing bolts or extruded section complete all as specified and as directed by Engineer- in- Charge.

Taking down shutter of any description, exc 1.00 Sqm but not exc 2.00 sqm each, complete all as specified and directed by Engr-in-Charge.

S&F in repair of 35 mm thick 2nd class HW plain framed flush shutter board with commercial veneered on both faces, the size of rail as per IS: 1003 (part-I), kiln seasoned & chemically pressure treated all as specified and directed by Engr-in-Charge.

S&F in repair 35 mm thick 2nd class hard wood glazed or skeleton shutters, open rebated and prepared to recieve glass, gauge etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred bead for securing glass etc, Sizes of member of shutters as specified in SSR Part-I, 1991, section 8, clause 8.20(a), complete all as specified and directed by Engr-in-Charge.

S&F in repairs, prelaminated particle board of 18/ 19mm thick exterior grade both sides with decorative face with veneer on both sides using cub bords finished with fixed with screws to timber frame, complete all as specified and directed by Engr-in-Charge.

S&F inrepair, continious (piano) hinges, MS bright finish or electro galvanised 30 mm width of flaps(when open), complete all as specified and directed by Engr-in-charge.

S&F in repair, 4 mm thick sheet glass for window/ ventilators ordinary quality and glazing with rubber beading/oil putty in square exc 0.50 Sqm in each pane, complete all as specified and as directed by Engr-in-Charge.

S&F in repair, 4 mm thick figured glass for window/ ventilators ordinary quality and glazing with rubber beading/oil putty in square exc 0.50 Sqm in each pane, complete all as specified and as directed by Engr-in-Charge.

S&F in repair, 6-8 mm thick tinted glass fixed with rubber beadig and bushes, complete all as specified and directed by Engr-in-Charge.

S&F in repair, stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples, complete all as specified and directed by Engr-in-charge.

S&F in repair, aluminium die cast of door closer hydraulically regulated designed No 3 universal type suitable for door shutter size of 850 mm to 1000 mm in width weight between from 61 to 80 kg and fixed, complete all as specified and directed by Engr-in-Charge.

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body governing pivot made of brass,other parts made of mild steel heavy duty and fixed Complete all as specified and directed.

S&F in repair railing rubber 50 mm width (rubber insert for railings), made from high-quality, UV-resistant, weatherproof EPDM rubber or equivalent, suitable for indoor and outdoor use, the rubber insert shallbe designed to fit securely into meal railing grooves, prividing cushioning, aesthetic finish and safety, complete all as specified and directed by Engr-in-Charge.

S&F in repair luxury bathroom vanity washbasin cabinet with mirror floor/ wall mounted, mouveable or fixex with drayers as per site requirement with 32 mm dia brass chromium plated waste fitting including granite stoen thickness 18-20 mm of desired colour and fancy type CP pillar tap/ mixer and all fittings as required at site for smooth functioning, making good disturbed surfaces in cement mortar 1:3 and fixed, complete all as specified and directed by Engr-in-Charge.

S&F of Oil-resistant, Re-positionalble and Eco-friendly strain resistance colour wall paper including fixing with adhesive and cutting to required shape complete in all respect to the satisfaction of Engr-in-charge and also adhere to below specifications:- (a) All wall paper to be erected from floor to the bottom of the ceiling or as specified. (b) All opening for the cutout for ducting/ raceways/ cables etc, in the partition to be closed and made air tight. (c) Disposing waste material from the site.

S&F in repair, Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement & fixing at site on PVC frame as per specification & drawing complete all as specified and as directed by Engineer- in- Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed by Engr-in-Charge.

S&F of framed work such as grills gratings, iron plates, etc with ends of bars shouldeed and or roveted or forged into spikes; framed guard bars barred iron doors ladders framed balusters walk way railing framework of Fe-410-0 or Fe-310-0, complete all as specified and directed by Engr-in-Charge.

S&F Welded steel wire fabric supplied and fixed, complete to wood or steel menbers not exc 4.00 kg per sqm, complete all as specified and directed by Engr-in-Charge.

M&L for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of existing sheet in any position, complete all as specified and directed by Engr-in-Charge.

M&L for preparing of new steel surfaces of applying two coat of sythetic enemul paint over one coat of red oxide any description ,over 10cm in width or girth not otherwise described.

M&L for petty repairs to plastered surfaces and like in CM 1:4 including preparing roughening, cleaning and making good with birla putty, finishing even and smooth in patches area exc 0.25 Sqm but not exc 1.50 Sqm in each patch and applying two coat of OBD matching the existing adjacent surfaces over a coat of primer complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floor and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed by Engr-in-charge.

M & L for 100 mm thick PCC (1:4:8) type D-2 (using 40 mm graded stone agg) as sub base surface finished even & fair with using extra cement complete all as specified and directed.

M&L 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 40mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed by Engr-in-Charge. (Make:- Nitco or equivalent approved make)

M&L chequred cement concrete tiles 30 cm x 30 cm x 25 cm thick set and jointed and pointed in neat cement slurry with grey cement and pigment in floors including 20 mm screed bed in CM 1:6 complete all as specified.

Demolition of brick work or stone masonary built in cement mortar including all quoins, arches, pillars etc.complete all as specified and directed

M&L for brick work with subclass 'B' bricks straight or curved on plan exceeding 6mm mean radius built in CM 1:4 complete all as specified.and directed

M&L for Half brick work with subclass 'B' bricks straight or curved on plan built in CM 1:4 complete all as specified and directed by Engr-in-Charge.

Dismantling floor, stone, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-charge.

M&L for 40 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate surface finished even and smooth using extra cement as in flooring complete all as specified and directed by Engr-in-charge.

M&L for 18 to 20 mm granite slab of any size for service counter and platform over and including 15 mm thick screed bed or bedding layer of cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including making good the edges complete all as specified and directed by Engr-in-charge.

M&L for skid/ non skid glazed ceramic coloured tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm set and jointed in neat cement slurry and pointed in colour cement as in floor over and including 15 mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified and directed by Engr-in-charge.

M&L for glazed ceramic colour tiles of of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm set and jointed in neat cement slurry and pointed in coloured cement on vertical surfaces such as in dado/skirting etc over and including 10 mm thick backing coat in cement mortar 1:4 complete all as specified and directed by Engr-in-charge.

M&L Vitrified tiles 10 mm thick dark shed (Square/rectangular ) area of each tile not exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white/coloured cement to match over and including 15 mm thick screed bed in cement mortar in (1:6) complete all as specified and as directed by Engineer-in-Charge.

M&L for glazed vitirified colour tiles of of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm set and jointed in neat cement slurry and pointed in coloured cement on vertical surfaces such as in dado/skirting etc over and including 10 mm thick backing coat in cement mortar 1:4 complete all as specified and directed by Engr-in-charge.

M&L for rendering 15mm thick in cement mortar 1:6 on other than fare face of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement including taking down cement plaster on any height complete all as specified and directed by Engr-in-charge.

M&L for rendering 5mm thick in patches in cement mortar in 1:3 on ceiling including taking down cement plaster on any height complete all as specified and directed by Engr-in-charge.

M&L Rendering 15mm thick in cement mortar in 1:4 in two layers with backing coat 10 mm thick and second coat 5 mm thick with WPC on fare face of brick work or concrete surfaces even and smooth without using extra cement, including taking down cement plaster on wall surfaces including raking out joints, hacking for key and scrubbing down with water, complete all as specified and directed by Engr-in-charge.

M&L for preparing new surfaces of walls and applying two coats of Oil bound distemper on new surface complete all as specified and directed by Engr-in-charge.

Ditto- all as per sl item No 154 above but white wash on ceiling.

Ditto- all as sl per item No 154 above but two coat of exterior emulsion appex paint on walls.

M&L for providing and applying Pidilite Dr fixit Pidifin 2K/Pidilite Dr Fixit Fastflex/ Fosroc Brushbond which is two-component, acrylic polymer-modified cementitious waterproofing coating, in two coats over prepared concrete/masonry surface including surface cleaning, wetting, mixing as per manufacturer’s specification, and curing to ensure seamless waterproofing protection. Measurement shall be in square meters of finished waterproofed surface.

M&L for providing and applying URP 301, a polymer-based bonding and waterproofing agent, mixed with cement in specified ratio and applied in two coats over cleaned and pre-wetted concrete/masonry surfaces as per manufacturer’s specifications, including surface preparation and curing. Measurement shall be in square meters of finished treated surface. (Make:- Pidilite Dr Fixit/ Fosroc/Sika) Note:- (a) Contractor has to provide labour for attending the complaints/ performing the work, as required during any time of the contract period . (b) Contractor has to perform work at scattered location and on different time line in the station during the contract period. (c) The rate is inclusive of work done upto to 4 storey building. (d) The contractor has to make good of disturbed surfaces and remove the taking down materials/ debirs from defence area. The rate of taking down, bringing the vehicle and removing the debris is inclusive of quoted rartes.

Note :- The amount of Rs 131570/- against Schedule of Credit on Srl Page …….. shall be deducted from the total amount quoted against Sch 'A'

DR Buildcon (BID ID -3339263)

B.R. Enterprises (BID ID -3330593)

AMIT ENTERPRISES (BID ID -3330577)

JAIPAL AND BROTHERS (BID ID -3330436)

M/S Parshant Associates (BID ID -3329946)

OMVIN ENTERPRISES LLP (BID ID -3330754)