Running Contract for Erection and Replacement of HT LT lines DP Structure for improvement and Maintenance works in O M at West Tiruvannamalai Division inrespect of Tiruvannamalai EDC

Amount

Excavation of pole pit For 7.5 mts / 8 mts pole in ordinary soil Including cleaning of site (each pit) using Men or Machine(1.25 x 0.6 x 1.5m)

Excavation of pole pit For 7.5 mts / 8 mts pole in semi rocky soil Including cleaning of site (each pit) using Men or Machine (1.25 x 0.6 x 1.5m)

Excavation of pole pit For 9 mts / 9.14 mts pole in ordinary soil Including cleaning of site (each pit) using Men or Machine(1.25 x 0.6 x 1.83m)

Excavation of pole pit For 9 mts / 9.14 mts pole in semi rocky soil Including cleaning of site (each pit) using Men or Machine(1.25 x 0.6 x 1.83m)

Transporting of 7.5 mtrs / 8.00 mtrs PSC/RCC poles including R.S.Joist and Rail Poles from road side to work spot -up to 1.0K.M

Transporting of 7.5 mtrs / 8.00 mtrs PSC/RCC poles including R.S.Joist and Rail Poles from road side to work spot -above 1.0K.M or part thereof by using Bullock cart up to 3K.M

Transporting of 9.14 mtr and above poles including R.S. Joist and Rail poles from road side to work spot- upto 1.0 Km

Transporting of 9.14 mtr and above poles including R.S. Joist and Rail poles from road side to work spot- above 1.0 K.M or part thereof up to 3K.M

Erection of 7.5m x 8.0m poles [RCC / PSC] including refilling of excavated earth using men or machine

Erection of 30"(9.14m) RCC/9.0mtr PSC Rail pole,RS including refilling of excavated earth using men or machine

Erection of above 30"(9.14m) RSJ/Tubular pole including refilling of excavated earth using men or machine

Stay pit Excavation in ordinary soil including cleaning of site(each pit) using men or machine[0.95 x 0.6 x 1.2m]

Stay pit Excavation in semi rocky soil including cleaning of site(each pit) using men or machine[0.95 x 0.6 x 1.2m]

Erection stay set complete

Erection of base plate/stay plate

Fixing of LT 1 ph "X" Arm / LT.HT TI Fitting

Fixing of LT 3 ph "X" Arm

Fixing of 3[1/2]' V ` X ' arm

Fixing of 4[1/2]'/5' V 'X' arm

Fixing of tapping channel / guarding "X" arm

Fixing of 11 KV Pin insulator with pin

Fixing of 11 KV strain disc with hardware

Fixing of LT Pin insulator with pin

Fixing of LT Shakle with hardware

Fixing of Aluminium knob

Paving Stringing and sagging of conductor including binding of pin and proper tightment [including transport of condutor from Road side to work spot] -Upto 7/2.59 mm ACSR, 7/2.50 AAAC including PVC cable upto 25 sqmm

Paving Stringing and sagging of conductor including binding of pin and proper tightment [including transport of condutor from Road side to work spot] -Upto 7/3.35mm / 3.15 AAAC including PVC cable above 25 sqmm

Paving Stringing and sagging of conductor including binding of pin and proper tightment [including transport of condutor from Road side to work spot] -Upto 7/4.09 mm ACSR

Paving Stringing and sagging of conductor including binding of pin and proper tightment [including transport of condutor from Road side to work spot] -Above 7/4.09 mm ACSR & DOG conductor

Earthing wiring and connection including transporting of earth pipe and excavation of pit -Transformer structure earthing 10ft depth - 3 nos of pipe

Earthing wiring and connection including transporting of earth pipe and excavation of pit -DP earthing including all works [double side earthing]

Earthing wiring and connection including transporting of earth pipe and excavation of pit -Erection of 4th Earth pipe including earthing

Earthing wiring and connection including transporting of earth pipe and excavation of pit -Earth pit masonary work 3 nos earth pits or using 3 nos concrete tub.

Erection of Double Pole DT Structure Complete-Erection Top Channel

Erection of Double Pole DT Structure Complete-Bed Channel [2 nos channel]

Erection of Double Pole DT Structure Complete-Cross with stud for bed channel

Erection of Double Pole DT Structure Complete-Erection of belting angle

Erection of Double Pole DT Structure Complete-Erection of HG fuse angle

Erection of Double Pole DT Structure Complete-Erection of Jumpering [HT Side]

Transformer wiring in LT side including Jumpering Bus bar etc.

Erection LT open type fuse unit arrangement single / double (including jumpering)

Painting of stru. Complete excluding DT [one coat Alu paint, excluding cost of paint)

Colour washing of 2 numbers structure pole [excluding cost of distember / snowcem]

Painting name of SS at seating channel including paint.

Erection of H.G Fuse unit complete (excluding H.G Fuse Angle)

Erection of Cross Bacing set complete

Erection of AB Switch with PT insulator complete & Jumpering

Erection of Single pole Transformer bed structure

Erection of Single pole AB switch (G.O.S)

Erection of Single pole H.G. Fuse set

Painting of all clamps, other materials and painting of single pole structure (Excluding paint)

LT Cable arrangement for Single pole structure

Guarding Arrangements-Flat guarding with 4 wire

Guarding Arrangements-Split Netural Guarding

Erection of Distribution Transformer-Upto 100 KVA

Erection of Distribution Transformer-Above 100 KVA and Upto 250 KVA

Erection of Distribution Transformer-500 KVA

Erection of Distribution Transformer-Erection of metering set 11 KV

Painting of RS Joist for 36 feet height of size(200mm X 100mm)- Red Oxide Primer

Painting of RS Joist for 36 feet height of size(200mm X 100mm) - Aluminium paint

Fabrication Labour charge for centre support only for DT structure

Erection of centre support for Dt stucture [complete all works]

Manufacture of special type clamps for rail poles, RS Joist, Tubular poles special clamps for DT structure with materials.

Manufacture of special type clamps for rail poles, RS Joist, Tubular poles, special clamps for DT structure [materials supplied by board]

Labour charges for alteration of Back Clamp

Labour charges for alteration of Stay Clamp

Providing of holes for all size angles / channel upto 3/4"

Providing of holes for Slot holes in flat / angles / channel upto 3/4"

Cutting of RS Joist / Angles /MS Channels

Loading of scrap materials

Unloading of scrap materials

Loading / Unloading of DT upto 100KVA with or without crane

Loading / Unloading of DT upto 250 KVA with or without crane

Loading / unloading of DT upto 500KVA with or without crane

TRANSPORT OF LINE MATERIALS[Transport of line Materials [ minimum 1 MT / DT ] [ minimum 1 No ] metering set [ minimum 1 no ] from sub stores to section pocket or to near then work spot at road side by using private vehicle other than bullock cart or vice versa excluding loading and unloading if Dept.vehicle not available.]-Upto 30 kms

TRANSPORT OF LINE MATERIALS[Transport of line Materials [ minimum 1 MT / DT ] [ minimum 1 No ] metering set [ minimum 1 no ] from sub stores to section pocket or to near then work spot at road side by using private vehicle other than bullock cart or vice versa excluding loading and unloading if Dept.vehicle not available.]-Above 30 kms and for every addl.1KM

Transport of line meterials from section pocket store to near work spot by using bullock cart or vice versa.

Dismantling of 7.5m x 8.0m poles [RCC / PSC] including refilling of excavated earth using men or machine

Dismantling of 30"(9.14m) RCC/9.0mtr PSC Rail pole,RS including refilling of excavated earth using men or machine

Dismantling of stay set

Dismantling of LT 1 ph "X" Arm / LT.HT TI Fitting

Dismantling of LT 3 ph "X" Arm

Dismantling of 3[1/2]' V ` X ' arm

Dismantling of 4[1/2]'/5' V 'X' arm

Dismantling of tapping channel / guarding "X" arm

Dismantling of 11 KV Pin insulator with pin

Dismantling of 11 KV strain disc with hardware

Dismantling of LT Pin insulator with pin

Dismantling of LT Shakle with hardware

Dismantling of Aluminium knob

Dismantling of HT LAS [3 nos] with jumbering and earthing

Dismantling of Conductor upto 7/2.59 mm ACSR, 7/2.50 AAAC including PVC cable up to 25 sqmm

Dismantling of Conductor upto 7/3.35 mm /3.15 AAAC including PVC cable up to 25 sqmm

Dismantling of Conductor upto 7/4.09 mm ACSR

Dismantling of Conductor above 7/4.09 mm ACSR & DOG conductor

Dismantling of DT - Upto 100 KVA

Dismantling of DT - Above 100 KVA and Upto 250 KVA

Dismantling of DT - 500 KVA

Dismantling of metering set 11 KV / 33 KV

Dismantling of Double Pole DT Structure -Top Channel

Dismantling of AB Switch with PT insulator complete & Jumpering

Dismantling of Double Pole DT Structure - HG fuse angle

Dismantling of H.G Fuse unit complete (excluding H.G Fuse Angle)

Dismantling of Double Pole DT Structure -belting angle

Dismantling of Double Pole DT Structure - Cross with stud for bed channel

Dismantling of Transformer wiring in LT side including Jumpering Bus bar etc.

Dismantling of LT open type fuse unit arrangement (including jumpering)

Dismantling of - Transformer structure earthing Including Earth pipe (3 -nos.)

Renewal of Earthing in DT

Busbar renewal in DT

Stay Wire Renewal - Stay set provision

Slanting of Pole - Set right

Low Sag Rectification - Resag with stay plate

Insertion of Pole

Tree Clearance

Polymer Insulator replacement

Gasket replacement in DT

Jumper Renewal

Provision of 4th wire

E.P.F. @ 13 % should be Entered by the Bidder

E.S.I. @ 3.25 % should be Entered by the Bidder

GST @ 18 % should be Entered by the Bidder