Creation of 63 kVA DT Sub Station along with HT/LT Network at Main Bazar Nowgam under MPLADS.

Amount

Supply,installation,testing,commissioning including Loading, Transportation , insurance, Unloading, Carriage and Delivery at Site (Complete Job) Sub-Station Part

63 kVA,11/0.433kV, 3-phase Distribution Transformers with Bimetallic Terminal Connectors Energy Level-2, (Al. wound upto 200kVA, Cu wound for 250kVA or higher kVA ratings) , and with LV Cable Box having detachable Al. Gland plate with LV Bimetallic terminal connection suitable for vertical take off of cable.

11 kV Gapless Surge Arrestor,9 kV ,10 kA ,LA with polymer housing, Stn. Type

11kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type

11 kV Horn Gap Fuse Set 3 Phase 200A

120mm² (1Ckt for 63 kVA) single core Cable,1.1kV Grade, XLPE Insulated Stranded Conductor FRLS type

9 Mtr. Long Pole,(ST-410 SP33)

GI Channel/Angle/Flat of sizes including clamps

Galvinized Nuts and Bolts.

Earthing of substation (05 Nos :LA SET,Neutral,Body (Dual) and GO AB Switch Handle) --Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 25 mm x 3 mm for connection of transformer body(dual earthing for body),G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover.

11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

LT Fuse set as per drawings

Wedge Connectors / PG Clamps

Danger Plates with Clamps

GI Barbed Wire for Anti Climbing with Clamps

Cement bottoming 1:2:4 mix as per Standards 0.48 cum/pole

Painting of Poles with one coat of red oxide and two or more coats of almunium paint to obtain well finish

Sundry items like Aluminium lugs, Jumpers, Binding Tape etc

Supply,installation,testing,commissioning including Loading, Transportation , insurance, Unloading, Carriage and Delivery at Site (Complete Job) HT- Part

GI V cross-arm with top Bracket including clamp icluding nuts and bolts

30 mm² ACSR Conductor

Supply,installation,testing,commissioning including Loading, Transportation , insurance, Unloading, Carriage and Delivery at Site (Complete Job) LT- Part

8 Mtr. Long Pole(ST-410 SP15)

LT shackles(16 kN) with Mukhi Clamps

50 mm² ACSR Conductor

Galvinized Nuts and Bolts.

Danger Plates with clamps

Anti-Climbing Device with Clamps

Earthing Complete by GI Pipe 40 mm 3 mtr long through GI Strip 25x3 mm

Painting of Poles with one coat of red oxide and two or more coats of almunium paint to obtain well finish

Cement bottoming 1:2:4 mix as per Standards 0.45 cum /pole

LT Line Spacersof sizes

M/S SHEIKH ELECTRICALS

M/S M D TRADERS

MIR ELECTRICALS