Installation and Energisation of Kapoi II TW LIP under Rasgobindpur Block in Mayurbhanj District

Labour charges for site clearence and construction of Approch road for movement of RIG to site

Labour charges for excavation of mudpit, settling pit and water channel with re-filling after completion of the drilling works

Labour charges for loading and unloading of camp materials and drilling materials including transportation charges

Rig movement (To & fro)

Rig leveling of site

Labour charges for drilling perfect vertical bore hole suitable for lowering of 200 MM dia PVC casing pipe 0 to 30 Mtr

Labour charges for drilling perfect vertical bore hole suitable for lowering of 200 MM dia PVC casing pipe 30 to 60 Mtr

Labour charges for drilling perfect vertical bore hole suitable for lowering of 200 MM dia PVC casing pipe 60 to 90 Mtr

Labour charges for drilling perfect vertical bore hole suitable for lowering of 200 MM dia PVC casing pip90 to 100 Mtr

Labour charges for lowering of PVC casing pipe in the finished bore hole

Cleaning and development of TW with air compressor for continously in adequate discharge of clean and sand free water

Operation of 5 HP water pump

Cost of 200 mm dia Sch-80 PVC pipe

Cost of 200 mm dia Sch-80 PVC Slotting pipe

Cost of 200 mm dia Sch-80 PVC Cone

Cost of 200 mm dia Sch-80 PVC well cap

Cost of 200 mm dia Sch-80 PVC Nipple

Cost of Bentonite powder(Drilling mud)

Cost of Gravel A Grade (2 mm to 3mm)

Cost of 200 mm dia M.S Clamp

E/Work in excavation in hard soil in Fdn. Including rough dressing & levelling the bed not exceeding 0.30 m depth as per specification

Earthwork in excavation of foundation in hard soil such as Hard stiff clay, stiff black cotton, hard red earth, shales, moorum ordinary gravels etc within 50m.Initial lead and 1.5m. Initial lift including rough dressing and levelling the bed and depositing the excavated materials within initial lead at nearby the worksite for reuse including breaking clods and stacking rubble for spreading and leveling as the case may be etc complete as per direction of the Engineer-in-charge. (Excavation by mechanical means 60% & manually 40%)

Filling in F&P with sand wall watered and rammed.

Cement Concrete (1:4:8) with 40mm size of h.g. metal.

Filling in F&P with excavated materials quantity

Filling in F&P with excavated materials in layers not exceeding 0.30m including breaking clods within 50m. initial lead including leveling the tranches as the case may be etc complete as per direction of the Engineer-in-charge.(Quantity by means of Mechanical 60% & mannually 40%

Cement Concrete (1:2:4) with 12mm size C.B. chips including hoisting and laying

Brick masonary in cm (1:6) in foundation & plinth.(Fly Ash)

Brick masonary in cm (1:6) in Superstructure.(Fly Ash)

12mm thick cement plaster over brick works.

Rigid and smooth centering & shuttering for RCC works including tales works after dismantlling then after centering including cost of all materials in ground floor (Below Plinth)

b) Column

c) Roof Slab

d) Lintel

Cost of steel including Labour charges for cutting, bending, binding, straightening and laying grills & placing in position including cost of binding wire 18 to 20 guage for 1.2Qntl.

Cement Punning

2.5cm A.S. flooring with C.C.(1:2:4) including punning with 12mm size chips.

Cost of M.S. Pannel Iron Door with M.S.Frame etc (size 1.20 mx1.98m)

White washing two coats to walls with shell lime of approved shade on new work to give an even shade including cost of lime & labour etc. complete.

Finishing walls with water proofing cement paint of approved shade on new work (2 coats) to give an even shade including cost of cement paint & labour etc complete.

Painting of red oxide primer for priming over iron work including cost of red oxide & labour etc complete.

Painting two coats with enamel paint for priming over iron work including cost of paint & labour etc complete.

Writing of display board

Labour charges of laying and fitting of 160 mm dia HDPE pipe

Cost of 160 mm dia HDPE-PE-80 Grade Pressure rating PN-4.00 pipe to delever water at highest counter

Cost of outlet

7.5 HP / 5.62 K.W Energy Efficiency Submerssible Pumpset of total head 39 mtr having 900 LPM discharge of reputed brand with BEE 3 Star Rated energy efficiency suitable for 200 mm dia Tube well as per IS Specificaation with 2 pair U clamp and 30 Mtr of 4.00 Sqm flat cable and impeller bronze grade LTB to of IS 318/1981 confirming to IS specification including all cost, coneyance, cess etc complete but excluding cost of GST.

Cost of Control Pannel with Auto star delta starter for operation of Squirrel cage induction motor up to 10 HP& protection against over load,single phasing with volt meter,Ameter& MCB in complete shape

63 Amp Triple Pole Main Switch confirming to IS No-4064 (Part-1 & 2) with ISI Marking of reputed company having utilisation capacity category AC-22 reputed brand of ISI specification including all cost conveyance, cess etc complete but excluding GST.

2.5mm² Submerssible (3 Core) Flat Cable ISI mark of reputed brand of ISI specification all cost, conveyance, cess etc complete but excluding GST.

3 KVAR Power Shunt Capacitor with ISI mark of reputed approved brand of ISI marked including all cost conveyance, cess etc complete but excluding cost of GST.

3 Core x 10mm² Insulated ( HD ) Tropoted armoured Electric Cable with Alluminium conductor for use in 3 phase power system of working voltage up to and including 1100 Volts at 50 Hz confirming to IS 7098 (Pt - 2 ) of approved brand of ISI Marked including all cost conveyance, cess etc complete but excluding cost of GST.

2.5 mm² PVC Single core Copper wire with ISI mark of reputed approved brand of ISI Marked including all cost conveyance, cess etc complete but excluding cost of GST.

Making earthing with required earthing materials like Charcoal , Common salt , Conduit pipe, Soft solder , Alcape , Nuts & Bolts, Cable sockets etc including excavation of earth pits of size (1.20 M x 1.20 M x 1.5 M) for fixing of earthing pipes of size 37.5 mm dia x 1.5 M length with required slottings in Pipe and fitting with 37.5 mm dia G.I.Flange including excavation of earthing trench for laying of earthing G.I.Wire and filling the trench & pit after fixing of pipes on completion of earthing works including supply of all the materals, including transportation etc.complete as per the direction of the Site Engineer in Charge.

Installation of Starter, Capacitor, fitting of 63 AMP Kit Kat, jointed with Troppodar cable to main supply line & substation cable with making cable trench including transportation all complete as per the direction of the site Engineer in charge..

Pump chamber wiring with PVC conduit pipe with fitting of necessary beds , drilling hole on the wall, fittng of bulb , clamping as per requirement complete.

Cost of supply 30 CM sly wrench-1 No, 5/8 Ring wrench-1 No, DE spanner-1/2-1 No, 30 CM Screw driver-1 No, Insulated plier-1 No (TAPARIA MAKE)

80 mm dia Nominal Bore G.I.Pipe having wall thickness 4.5 mm, Electrical resistence welded of Medium Class confirming to IS 1239 ( Pt) - 1 / 2004) with latest ammendment screwed at both ends as per IS 554 with socketed at one end and other end protected with plastic thread protector including its transportation and unloading at LIP site. The socket confirming to IS - 1239 (Pt)-II / 1992 ) with latest ammendment in random length of 4 to 7 M. Each pipe should bear ISI certification and manufacturer Name / Trade marks. (as per S/R 2022)

100 mm dia Nominal Bore G.I.Pipe having wall thickness 4.5 mm, Electrical resistence welded of Medium Class confirming to IS 1239 ( Pt) - 1 / 2004) with latest ammendment screwed at both ends as per IS 554 with socketed at one end and other end protected with plastic thread protector including its transportation and unloading at LIP site. The socket confirming to IS - 1239 (Pt)-II / 1992 ) with latest ammendment in random length of 4 to 7 M. Each pipe should bear ISI certification and manufacturer Name / Trade marks. (as per S/R 2022)

100 mm dia G.I.Bend (Medium Duty) confirming to IS No. 1239 (Pt-II/1992) with ISI mark of reputed brand including all cost conveyance, cess etc complete but excluding cost of GST.

80 mm dia GI Socket (Medium Duty) with ISI mark of reputed brand including all cost conveyance, cess etc complete but excluding cost of GST.

100 mm dia GI Socket (Medium Duty) with ISI mark of reputed brand including all cost conveyance, cess etc complete but excluding cost of GST.

100 mm dia G.I Flange (Medium Duty) confirming to IS No. 6392 / 1971 with ISI mark of reputed brand including all cost conveyance, cess etc complete but excluding cost of GST.

100x80 G.I Reducer

100 mm dia C.I. Sluice Valve Flanged type PN-1.0 as per IS 14846-2000 standard) with ISI mark of reputed brand including all cost conveyance, cess etc complete but excluding cost of GST.

Cost of 160 x 160 x 160 mm dia Spigot moulded HDPE Tee 10 Kg Tee

160 mm dia HDPE End cap

Cost of Butterfly Valve BS:5155/15 13095-CI MOC Lever Operated P.N-1 with ISI Mark

160x160x100 mm dia G.I Outlet Tee weldless long radiuos made out of GI socket Medium 300 mm long with ID 160 mm ID (Suitable for Insert directly 160 mm dia HDPE Pipe with minimum 100 mm long inside the GI socket ) Fitted with 1.95 Mtr long 100 mm dia GI Pipe as per IS 1239 Part-1 or IS - 1161 welded with 2 nos 100 mm dia GI flange in between the 1.95mtr GI pipe as per IS 1239 part-1 or IS 1161 bending with long radius GI Pipe in 90 Degree (Bending 90 Degree long radius both side without welding ) water locking arrangements made out of 1 no of 100 mm dia open flange and 1 No of 100 mm dia Blind flange with hings gaskets arrangements for waterlocking system.

100 mm dia M.S TW clamp (Pair) with ISI mark of reuted brand including all cost conveyance, cess etc complete but excluding cost of GST.

160 x 110 mm dia HDPE Reducer

Cost of RCC protection cover stand for Tube well

6 MM Steel wire rope PVC insulated

Cutting , threading of 100 mm dia G.I.Pipes to proper size with required length making leak proof for flow of water and fitting it in proper position including transportation of Materials to Work site etc. complete as per the direction of the Site Engineer in Charge.

Installation of 6 HP Submerssible Pumpsets lowering with 100mm dia G.I.Pipe of required length jointed with Bend, socket and Delivery G.I & HDPE pipe fitting with clamp over RCC pillar support & fitted Flange with Sluice valve including transportation complete as per the direction of the Site Engineer in Charge.

MS Nut Bolts (1/2" x 5/8") including all cost conveyance, cess etc complete but excluding cost of GST.

Cost supply of 3 mm thick Rubber Insertion including all cost conveyance, cess etc complete but excluding cost of GST.

Stainless steel Nut & Bolt and U clamp wire rope PVC insulated

Construction and erection of 11/0.416 KV 25 KVA (AL) Tranforme BIS DP Sub-Station confirming to RE Rule 1956. Mounted on 2.44 mt. long structure, supported on 10 mt long PSC Pole(330 KG) with Base plate, Transformer Hard Channel & top Channel(GI) 70KN made of 2.8 mtr long 100X50X6 mm size G.I 70KN Channel, transformer belting on 2.80 mtr long 50X50X5mm size G.I.70KNAngle, (all REC SPN. Std) with all accessories like, 3-Pole 11 KV H.G. Fuse and A.B. Switches both mounted on 2.8 mtr long 75X40X6 mm size G.I.70KN.Channel & supported by 1.0 Mtr long 50x50x5mm G.I..70KN Angle , with 3 Nos 11 KV lightening Arrestor 12KV,10KA Station C & Distribution box with MCCB , Aluminium Busbar for 25 KVA S/S mounted on Box (75x40x6 mm) 2.5 Mtr long 40mm pipe earthing with G.I.Flat 50x6 mm GI Flat for earthing 2.36kg/mtr including cost of IPC for 99 sqmm AAA conductor( for COV) the supply line with conductor 55 sqmm ACSR RABBIT PVC INSUL , providing 18mm G.I. HT stay with concreting (1.65x030x0.30) mtrand concrete of poles(1.8x0.5x0.5)mtr= 0.45 Cum for PSC Pole and concreting of poles as required carping & padding of poles, Danger Board at each pole. Anti climbing Device & all other necessary fittings i.e. required size of G.I Nuts & bolts different Size, cable, cable sockets etc including cost of Fly Ash brick masonary boundary wall of size 15'x12' size 0.25 wall of 2.00 Mtr. height from ground level with 0.25 m thick wall, Fixing of Iron Grill Gate all labours transpsortation complete with liasion for testing, inspection and commissioning & writing on the poles as per prescribed colour code . etc. Complete as per the direction of the Site Engineer in charges.

Construction of 3 phase 11 KV line as per REC standard confirming to RE Rules 1956 with 10 M long PSC Pole (330 KG) with Base Plate support in 50 M span, conductor 55sqmm ACSR RABBIT PVC Insul 11 KV "V" Cross arm GI KN70(10.2 Kg Each) , with required No.of 11 KV Disc.Insulators(BIS) 70KN 3 Polymer & 11 KV Pin Insulators polymer, providing 18mm G.I. HT stay with concreting (1.65x030x0.30) mtrand concrete of poles(1.8x0.5x0.5)mtr= 0.45 Cum for PSC Pole and concreting of poles as required carping & padding of poles, Danger Board, Back clamp for Danger Plate 25x3 mm Flat at each Pole, Anti Climbing Devices Back clamp for Anti climbing device 25x 3 GI Flat, Stay Set at Bending point & Double Stay at end point with 18 mm G.I. H.T Stay , concreting of Stay with Anchor plate, guarding at Road crossings etc. Marking OLIC in every PSC pole in enamel paint including cost of all materials, labour ,transpotation,inspection & commissioning etc.complete as per direction of Junior Engineer, Electrical in charge .

Cost of Interposing Polewith 10 M long PSC Pole (330 KG) with Base Plate 11 KV "V" Cross arm GI KN70(10.2 Kg Each) 11 KV Pin Insulators polymer

Please Enable Macros to View BoQ information