REPAIRS TO HT SECTION FOR ACCOMMODATION OF ELECTROPLATING TANK AT MPF AMBERNATH

Amount

Repairs to HT Section for accommodation of Electroplating Tank at MPF Ambernath.”

Demolition of Reinforced cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level), etc all complete as directed by the Engg in Charge.

M&l for Rolled sections FE 410-W (Gde-E 250 Quality A) as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, etc all complete as directed by the Engg in Charge.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), etc all complete as directed by the Engg in Charge.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, etc all complete as directed by the Engg in Charge.

M&L Ready Mix concrete design Mix M30, Beams, cantilevers, lintels, columns pillars, piers, posts, struts, chullah hoods, stair case, arches, domes, vaults, shell roofs, arch ribs, folded plates, slabs, balconies, canopies, deck slabs etc. or in similar articles upto 5th floor level, etc all complete as directed by the Engg in Charge.

Dismantling structural steel work including doors, gates but excluding framed truss, etc all complete as directed by the Engg in Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, etc all complete as directed by the Engg in Charge.

M&L for Screed bed or bedding layer of mortar 30 mm thick for laying floor finishes in CM 1:6, etc all complete as directed by the Engg in Charge.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, etc all complete as directed by the Engg in Charge.

M&L for Chequered cement concrete tiles with gray cement with pigment 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors, etc all complete as directed by the Engg in Charge.

Demolition Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, etc all complete as directed by the Engg in Charge.

MLL for preparation of steel surfaces and applying one coat of red oxide and two coats of Synthetic enamel paint, etc all complete as directed by the Engg in Charge.

M&L for rendering 20 mm thick cement plaster on brick /stone masonry with CM 1:4, etc all complete as directed by the Engg in Charge.

S&F Wire netting of galvanized steel wire 1.40mm dia, Size of Mesh 25 mm fixed with tinned tacks of wire staples, etc all complete as directed by the Engg in Charge.

JAYPEE ENTERPRISES (BID ID -817958)

J K Enterprises (BID ID -818048)