PROVN OF CAMOUFLAGE PAINTING ON OTM BUILDING SECURITY TOWERS AND SECURITY BOUNDARY WALL AT AF STN FEROZEPUR UNDER GE(AF) BHISIANA

Amount

Taking down cement plaster of any description and any thickness on brick ,concrete or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed by Engineer in charge.

M&L for rendering 15 mm thick cement plaster in CM (1:4) on fair faces of brick or concrete surfaces and finishing the surface even and fair without using extra cement etc. complete all as specified and directed by Engineer in charge.

M&L for Rough cast plaster on brick wall consisting under coat of cement and sand mortar (1:3) not less than 10mm thick and while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel mixed with coarse sand and cement in the ratio 1:1:1 shall be applied and finish even, complete all as specified and directed by Engineer in charge.

M&L for preparing new plastered or old decorated surface of wall, concrete surface and applying two or More Coats of 100% Premium Acrylic Exterior Emulsion Paints in Camouflaging pattern having VOC less than 50gm/litre and UV Resistance as per IS 15489:2004, Alkali & Fungal Resistance, Dirt Resistance exterior paint of required shade ( Company Depot Tinted) with silicon additives applying @ 1.43litre/10 sqm over and including priming Coats of Exterior Primer of same make applied @ 0.90 litre/10sqm as per sample approved by GE complete all as specified and directed by Engineer-in-Charge. Note : The % of the colours may change without any financial effect.

M&L for complete removal of existing treatment from plastered surface of wall by using electric sand paper grinder, washing, rubbing down and stopping of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescence salts, trading oil, greasy spots etc and preparation of plastered surfaces finally rubbed and smooth with sand paper, complete all as specified & directed by Engr-in-Charge.

Material and labour for preparation of Old/ Previously untreated steel surfaces of any description not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint over, complete all as specified and directed by Engineer in Charge.

SWARN SINGH AND CO. (BID ID -3115842)

M/s BALDEV SINGH (BID ID -3109714)

M/s Luxmi Constructions (BID ID -3115795)

REYANSH GARG AND COMPANY (BID ID -3114459)

M/s Kamal Builders (BID ID -3113260)

GUPTA AND ENGINEERS (BID ID -3110116)

STELLAR PROJECTS (BID ID -3114940)

B K CONTRACTORS (BID ID -3110623)

Rasvinderpalandco (BID ID -3106138)