Certain repairs to flooring, plinth protection, shutters joinery at amn depot and other OTM under AGE B/R-IV of GE AWC Mhow.

Amount

Complete removal of existing water proofing treatment upto concrete surface of roof slab of any description and of any thickness including cleaning, wire brushing, watering, removal of debris outside MD land as directed by Engineer-in-charge complete all as specified and as directed

M&L for PCC (1:2:4) type B1 using (20mm graded stone aggregate) mixed with water proofing compound @ 2% by weight of cement as in concretes padding laid to required slope including finishing the concrete surfcae fair and even without using extra cement. Note: (i) PCC padding shall be turned around into coving at all vertical projection above roof upto a height of 150mm (ii) Water proofing compund shall be measured & paid separately as supply only.

M&L for brushing neat cement slurry with 3Kg of cement per square metre all as specified and directed.

M & L for 20 mm thick screed bed or bedding layer of mortar in cement mortar (1:3) for laying roof finish as padding finished with WPC 2% by weight of total cement, complete all as specified and directed NOTE :- Integral WPC shall be measured and paid separately.

M&L for applying oil bound primer @ 0.40 Litre/Sqm manufactured by the same agency as that of APP with density of 0.87 to 0.89 Kg/Litre at 25 degree cesius on the prepared dry roof surface and provide and lay 3mm thick APP modifed water proofing membrane reinforced with non-wooven polyster matt with physical properties as given in particular specification. The laying shall got be done through authorized applicator of manufacturer as specified in particular specifications. Provide over the membrane finishing with two coats of solar reflective bituminous aluminium paint @ 0.10 Kg/sqm as prescribed by manufacturer of membrane including Ten years guarantee on prescribed form complete all as per particular specification , manufacturers instructions and as directed by Engineer-in-Charge.

Supply only integral water proofing compound

Taking down chowkats of frames with shutters (without taking off shutters from the frames) exc 1.5.Sqm & not exc 4 Sqm each

Taking down chowkats of frames with shutters (without taking off shutters from the frames)n exc 1.5.Sqm each

Taking down shutters of any description not exc 1 Sqm each

Taking down shutters of any description but exc 1 Sqm each and not exc 2 Sqm each

M&L for second class hard wood plain, solid, straight chowkats & frames wrought framed rebated on the solid rounded or chamferred put together with glue pinned at joints.

S&F 2nd class hard wood 35 mm thick Plain, framed, panelled shutters of factory made (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats complete all as specified and directed

S&F 2nd class hard wood 35mm thick glazed and skelton shutters ( factory made)of open rebated and prepared to recive glass, guaze etc (without sash bar)edges of framing plain chamfered or rouunded fitted with cut and beads for sccuring glass, gauge etc size of shutters as specified in SSR Part-I section & clause 8.20(a)..complete all as specified and directed

S & F opening solid PVC door frame of size 50mm X 47mm made out of 5mm wood grains printed PVC sheet reinforced with MS square tube and edges painted to match with printed shet all as specified & shown on drawing SSR Part II 2010 complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tube for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width struck in side with solvent cement for stiles and plain colour PVC sheet for top tail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement suppling and fixing the frame at site as in repairs all as per specification & drawings given in SSR 2010 Part II all as specified and directed.

S&F 100 mm long stainless steel but hings medium weight complete.

S & F 150 mm long extroded aluminium alloy handles, fabricated type anodized complete

S & F 200mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed by the Engineer-in-Charge

S/F 300 mm long aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as specified.

S & F in repairs 15mm bore bib taps, fancy type chromium plated cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S & F in repairs stop valves, fancy type chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions fixed complete all as specified and directed.

S&F in repair brass chromium plated shower rose 125mm size all as specified

S&F grating fixed in repair 150mm dia complete all as specified and directed

S&F in repair water closet squatt pattern complete vitreous china squatting pan 'Orissa' pattern size 580 x 440 mm white with integral foot rest excluding flushing cistern & flush pipe

S & F in repairs PVC symphonic action type , flushing cistern low/high level , white , with inlet , ball valve , float and handle including brackets 10 litre capacity and including flush pipe PVC of necessary height complete all as directed.

M &L Cutting holes in brick walls, built in CM for inserting hold fasts and making good dismantled portion in CM 1:3 OR cement concrete 1:2:4 type B1 depth of embedded portion of hold fasts or lugs measured from the face of the jambs into the wall exc one brick and n exc two brick. complete all as specified and directed.

S&F in repair Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, as in hold fast or similar small articles conforming to Fe410-0 or Fe 310-0 complete all as specified and directed

S&F aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples. complete all as specified and directed

M&L preparation of new wooden surfaces of any description and apply two coat of synthetic enamel paint over a coat of pink primer not other wise described over 10 cm width or girth complete all as specified and directed

S & F 75mm long butt hings medium weight cold rolled mild steel & fixed to chowkats all as specified.

S & F aluminium bow handles, cast type, anodised size 100 mm.

S & F aluminium anodised barrel tower bolts of size 100 mm extruded section and fixed

S&F 150 mm long, gate and shutter, hooks and eyes aluminium plate type-II complete all as specified.

S&F floor door stopper of aluminium alloy body and tongue anodized with hard drawn steel spring with rubber shoe over all length as cover plate 150 mm complete as in repairs.

S&F in repair Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165

Description same as per Item no. 35.00 above but exept material fabrication only Note: The material obtained from item no. 36.00 shall be reused.

M&L preparation of new surfaces of any description and apply two coat of synthetic enamel paint over a coat of red oxide not other wise described over 10 cm width or girth over steel surfaces surfaces.

S & F in repair aluminium alloy wire cloth, 0.45 mm nominal dia o wire and avoarrae width of aperture 1.40 mm and fixed with aluninium wire stables fixed in repairs

Taking down cement plaster on brick or stone wall etc. including raking out joint, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M & L for rendering 20mm thick plaster in cement mortar (1:4) in two coats (15mm thick backing coat and 5 mm thick finishing coat) on fair faces of brick work or concrete surfaces mixed with WPC as per manufacturer’s instructions, but not less than 3% by weight of cement finished even and fair without using extra cement complete all as specified and directed.for buildings upto and including 4 storeys :- NOTE: WPC shall be measured and paid separately

M & L for rendering 15mm thick plaster in CM (1:6), on fair faces of brick work or concrete surfaces, finished the surfaces smooth, with using extra cement complete all as specified and directed.

M & L for rendering 5mm thick plaster in CM (1:3), on fair faces of ceiling surfaces, finished the surfaces even and smooth (without using extra cement), complete all as specified and directed.

M & L for rendering 10mm thick plaster in CM (1:3), on the top of chajjas, concrete surfaces, finished even and smooth (without using extra cement) and mixed with integral WPC as per manufactures instructions but not less than 3% by weight of cement complete all as specified and directed

M & L for preparation of newly plastered surfaces or previously untreated surfaces of ceiling and applying three coats of white wash on ceiling, complete all as specified and directed.

M & L for preparation of newly or untreated plastered surface applying two caots of oil bound distemper (OBD) over a coat primer complete all as specified and directed.

M & L preperation of newly plastered or previously untreated surfaces of wall and applying two coats of acrylic emulsion Exterior grade weather proof acrylic emulsion Antifungal and anti algea (Antifungal) paint over one coat of primer all as specified and directed

M & L preparing old decorated surfaces of ceilings and applying two coats of white wash.

M & L for preparing surfaces, plastered or unplastered old surfaces of walls applying one coat of oil bound distemper (OBD) complete all as specified and directed.

M & L for injection chemical GLYPHOSPHATE (4% Concentration) of 20 ml or till refusal by making cut / injection in the stem of plant of roots at 30 mm and sparaying with solution 25 ml GLYPHOSPHATE (4% concentration diluted with 1 ltr of water) and removing the Plant / vegetation of size 0-10 cm girth including penetrated roots complete including necessary scaffolding etc for plants / vegetation complete all as specified and directed for buildings upto and including 4 storeys.

M & L for injection chemical GLYPHOSPHATE (4% Concentration) of 20 ml or till refusal by making cut / injection in the stem of plant of roots at 30 mm and sparaying with solution 25 ml GLYPHOSPHATE (4% concentration diluted with 1 ltr of water) and removing the Plant / vegetation of size 10-20 cm girth including penetrated roots complete including necessary scaffolding etc for plants / vegetation complete all as specified and directed for buildings upto and including 4 storeys.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing rubish off the premised out side M.D. land all as specified.

S & F Non Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 20mm thick screed bed in CM 1:6 to recieve tiles complete all as specified and directed.

S&F glazed coloured ceremic tiles 300 x 200 mm x 7 mm thick as in dado/skirting set and jointed in neat cement slurry including 15 mm thick rendering in CM 1:4 to receive tiles complete all as specified and as directed.

M & L Cast iron floor trap 75mm, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) all as specified

M & L for cast iron Nahani trap 100 mm including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) all as specified all as specified

S & F 3 mm thick sheet glass ordinary quality and glazing clips with oil puttyor beading piece in square not exc 0.50 Sqm in each frame complete all as specified.

Taking down steel tubing and connections including clamps for refixing or removing to store etc 15mm dia pipe complete all as directed.

Taking down steel tubing and connections including clamps for refixing or removing to store etc 20 mm dia pipe complete all as directed.

S&F tubes medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors 15mm bore all as specified.

S&F tubes medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors 20 mm bore all as specified.

Dismantling boarding, any description, fixed in any position with screws complete all as specified and directed

M&L for fixed in repair 18/19 mm thick block hard, grade 2 quality interior grade, commercial type fixed with screws to timber frame work complete all as specified and directed

M&L for fixed in repair 2nd class hard wood plain fillets square, rectangular or triangular in section clean sawn, secured with screws area etc. 6 Sqm and not exc 13 Sqm.

S & F in Curtain rails alumnium alloy with fixing backets, stops, rollers etc., all as specified and directed.

S&F in repair wash basin, vitreous china, white flat back, size 580 x 450 mm including brakets, pillar tap, cast copper alloy, 15 mm bore capstain heads, chromium plated screwed down high pressure with long screwed shanks and fly nuts, PVC waste pipe and 32 mm dia chromium plated cast copper alloy waste coupling all as specified.

S & F in repair Stain less steel sinks with drainage board made of 1mm thick sheet for kitchen with plug washers waste pipe, cast iron cantilever brackets connecting union overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm including bedding and cement mortar or fixing cantilever brackets and connecting union to waste pipe upto 0.5sqm each all as per specified and directed.

Demolation of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness below or above ground floors.complete all as specified and directed

M & L PCC 1 :2 :4 type B1 (using 20 mm graded store aggregate), 40 mm thick in flooring finishing cement concrete surfaces finished even and smooth without using extra cement all as specified.

Glass dividing strips inserting in cement mortar 3 mm thick and 38 mm width complete all as specified and directed

Taking down PVC rain water pipes any size and pattern including all fittings such as heads, shoes, bends, swan-necks all including cleaning and refixing or removal (measured overall as fixed along the centreline over fitting and accessories) all as specified and directed

S & F 110 mm dia, PVC (SWR) single socketed rain water pipe in any length with rubber ring joints fixed to walls complete all as specified and directed

S & F 75 mm dia, PVC (SWR) single socketed rain water pipe in any length with rubber ring joints fixed to walls complete all as specified and directed

S & F 110 mm dia, PVC bend complete all as specified and directed

S&F 110 mm dia PVC (SWR) shoe complete all as specified and directed

S &F in repairs PVC water tank cover suitable for 500 ltrs, 1000 ltrs, 2000 ltrs capacity water tank

Dismantling of Asbestos cement (corrugated, semi corrugated, etc.) sheets as in roof coverings.

Dismantling Structral Steel Work all as specified and ad directed.

S&F Pre-Painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified.

S&F Pre-Painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified.

S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240

S&F in repairs cast iron sand cast soil waste pipes in any length with or without ears with cement joints fixed to alls 100 mm dia complete all as specified and directed

S&F in repairs cast iron sand cast soil waste pipes in any length with or without ears with cement joints fixed to alls 75 mm dia complete all as specified and directed

M&L At points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same

Demolition of cement concrete of any description in any position, concrete filling in sunken floor.

M & L PCC 1:7:12 type F 2 with bricks as in filling of sunken slab after laying carrying out required tests for CI pipes joints WPT

Roughening surfaces of old concrete by sweepping clean and washing down with water to remove dust

M&L for 15mm thick rendering to sides and bottom of sunken slab in CM 1:3 with water proofing compound, finishing the surfaces even and smooth without using extra cement Note:- WPC shall be measured seperately.

M&L for cement concrete type B0 using 12.5 mm graded aggregate in sunken floors 40mm thick complete all as specified.

S&F GI spouts 40mm dia projecting ateastn 10 cm clear of the wall.

M&L for applying two coats of hot bitumen 85/25 grade @ 1.70 Kg/Sqm over vertical surfaces and floor of sunken slab after laying all CI connection branch pieces etc after covering joints with PCC 1:2:4 mixed with WPC.

S&F Polish kota stone/machine cut slab thick 20 mm thick machine cut in skirting / dado around window cill , jointing and pointing with white cement slurry including cutting and polishing and 15 mm thick backing coat in CM 1:4 complete all as specified and directed.

S & F aluminium window/ventilator/door in lieu of wooden made out of extruded powder coated aluminium sections, with sliding or openable shutters including frame and necessary jointing cleats, glazing clips, powder coated aluminium snap beading, screws etc complete and also including powder coated aluminium fittings such as cobra hinges, butt hinges, tower bolts, Star lock, hooks & eyes peg stays, rubber beading and handles including connected items with and including, complete all as specified and directed. NOTE :(i) Minimum thickness of powder coating shall be 15 micron for windows and 25 microns for doors. (ii) Rubber beading shall be measured and paid sepearately.

S&F 4mm thick plain sheet glass of ordinary quality for aluminium windows including rubber beading etc all as directed and specified.

S&F aluminium anodised grill and frame of approved make and pattern of 10mm thick fixed including F frame for aluminium windows all as directed and all as specified.

S & F rubber beading suitable for fixing 4 mm / 5 mm thick glass in aluminium window/door etc all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar complete all as specified and as directed.

M&L for chequered cement concrete tiles 25cm X25cmX25mm thich set, joined and pointed in neat cement slurry in floors with grey cement and pigment complete all as specified and directed.

S & F in repairs 150mm floor door stopper of aluminium alloy body and tounge,anodised,with hard drawn steel spring ,fixed in floor complete as all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar complete all as specified and as directed.

M & L brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM 1 : 6

M & L brick work with sub class 'B' bricks straight or curved on plan to any radius built in CM 1 : 4 in half brick thick walls.

S&F in repairs door closer hydraulically regulated designation no-3 universal type aluminium extruded section suitable for door 851 to 1000mm in width and weight between 61 to 80 kg and fixed complete as specified and directed.

Dismantling Exc 500 and n.exc 1000 ltr capacity water tanks and removing to store.

Dismantling existing water tanks exc 500 and n.exc 1000 ltr cpacity setting side (or lowering if reqd) for repairs, cleaning, etc., and hoisting and reconnecting and re-fixing in the same position and including cleaning and removing all scale and dirt etc from tanks and from mouth of circulating pipes etc complete all as specified and directed.

Dismantling of posts or struts (Wood, steel or RCC ) any section including taking out embeded portion and making good disturbed ground posts embeded in Concrete, brick work, masonery complete all as specified and directed.

Excavation in post holes or similar holes each not exc 0.5 Cum getting out ,returning, filling and ramming earth in layers not exceeding 25 cm, watering and removing surplus soil to a distance nexc 50 mtr and making good surface complete all as specified and directed.

Providing reinforced cement concrete type B-1, 1:2:4 (20 mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area exc 60 sq.cm but n exc 250 sq. cm, with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed

M&L mild steel deformed TMT bar 10mm dia and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed by the Engineer-in-Charge

Description same as per Item No. 109.00 above but 8mm dia bars as in stirrups, spacers and binders, quality conforming to Fe-410.

S&F in repair galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type if standard rail s straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire staple or steel pins etc complete all as specified and directed by Engr –in- Charge

Description same as per Item No. 111.00 above but restraining and resecuring the existing barbed wire.

Dismantling of fencing wire mesh including tie rods, flat iron etc any type, complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire.

Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and directed by Engr-in-Charge.

Supplied and fixed mild steel screw bolts 11 to 15mm diameter of shank (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and haxagonal or square exe 15 cm and n exc 22.50 cm long complete all as specified and directed.

M&L flat iron fillets fixed to the fencing posts incl all necessary drilling bolting or riveting etc and similar work conforming ot Fe 410-0 or Fe 310-0.

M&L for cement concrete Type D-2 1:4:8 (40mm graded stone aggregate) in foundations filling and mass concrete as in surroundings of fencing post etc complete all as specified and directed.

Description same as per Item No. 118.00 above but 10mm round bar for tie rods etc or similar works.

S&F 500 litres capacity rotational moulded polythene water storage tanks (cylindrical vertical, with closed top), hoisted and fixed in position as specified in SSR Part I and directed

S&F Kitchen sink waste coupling with waste pipe of PTMT (half or Full threaded) minimum weight 32mm-45 gms/ 40mm-60 gms complete all as specified and directed.

S&F in repairs 20mm bore ball valves high pressure of PTMTwith epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

Refixing shutter in same opeining of any description n exc 1 sqm each complete all as specified and directed.

Refixing shutter in same opeining of any description exc 1 sqm but n exc 2 sqm each complete all as specified and directed.

M &L for exterior wall decorating and water proofing treatment to wall surface by wire brushing in order to remove dust, dirt, loose particale, laitance. Thereafter wash the surface with clean water & allow to dry. fill vissible crack,joints by chemistic crackseal caulking compound and allow to dry for 24 hours. Apply a primer coat of chemistic Prime N Seal ( water base primer) and allow to dry for 6 hours. there after apply 02 coats of chemistik PDS-50 (WB high build Anti coronation coating cum water proofing) and shade by brush at the interval of 08 hours between the coat and allow to dry to match the existing shade Rate quoted shall included for scaffolding up to and including 04 Stories , covering etc. complete all as specified and as directed

Jamna Constructions

M/S GARG CONSTRUCTION

M/S Ashish Construction

sunway associates