Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹40,000
Closing Date
22 Jul 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Aircraft Division, Bangalore
HINDUSTAN AERONAUTICS LIMITED AIRCRAFT DIVISION Vimanapura Post Bangalore - 560 017
INSOURCING OF TOOL DESIGN ACTIVITY FOR HTT 40 PROJECT
8184
A/OPEN TENDER/ESP/HTT40-28/1/24
Works
Bangalore Complex- Aircraft Divn
₹0
₹40,000
22 Jul 2024
2 Jul 2024
2 Jul 2024
22 Jul 2024
HINDUSTAN AERONAUTICS LIMITED AIRCRAFT DIVISION, BANGALORE COMPLEX POST BAG NO. 1788, VIMANAPURA POST, BANGALORE-560 017 INDIA Phone: +91 80 22321585, Fax +91 80 22315188 Web Site: www.hal-india.com
Tender Ref No. A/OPEN TENDER/ESP/HTT40-28/1/24 Dtd 02.07.2024 (Due Date: 22.07.2024)
Scope of Supply NATURE OF WORK: IN-SOURCING OF TOOL DESIGN ACTIVITY FOR HTT 40 PROJECT (OPEN TENDER -Two Bid System)
1. Tenderer / Bidder Details
1 Name of the Tenderer / Bidder M/s.
2 Nature of Organization (Govt. / Public Limited Co. / Pvt. Limited Co. / Partnership / Proprietary)
3 Address of Registered Office
4 Address in Bangalore
5 Contact Person & Designation with Mobile No.
6 Telephone No.
9 Please confirm whether the bidder is Unregistered / Registered / Composition Scheme in GSTN
10 GSTIN No. (Copy to be Submitted)
11 PAN No. (Copy to be uploaded)
12 Whether the Bidder is MSE as per MSMED Act (If Yes, pl. attach the relevant document to prove the same in the Technical Bid)
Whether the MSE is owned by SC/ST? (If Yes, pl. attach the relevant document to prove the same in the Technical Bid)
Whether the MSE is owned by Woman Entrepreneur? (If Yes, pl. attach the relevant document to prove the same in the Technical Bid)
Bidders who wants to avail privileges given to MSME vendors, should have UAN. Copy of the Udyog Aadhar certification shall be submitted to consider such privileges to MSMEs.
13 Pl. indicate whether the bidder is blacklisted or delisted. (Bidders who are blacklisted or delisted from any PSU / Govt. Departments will not be eligible to participate for bidding)
14 Whether the Bidder is a Registered Vendor with any of the HAL Divisions.
If 'Yes', please confirm the name of HAL Divisions where you have registered and provide the details such as Vendor Registration No. & Category and UPLOAD related documents to support your claim.
15 Pl. confirm the address to which PO to be placed in the event of acceptance of your tender after bid evaluation.
16 Bidder shall indicate their GeM (Government e Marketplace) Seller ID.
17 Please upload your Bank details in NEFT/RTGS/ECS format duly authorized by concerned Branch Manager of the Bank.
BANK DETAILS (Copy of cancelled cheque leaf to be Submitted) Bank Account No.
Name of the Bank
Type of Account
2. BID QUALIFICATION CRITERIA (BQC)
Sl. No. Instructions Remarks Bidder Compliance
1.1 BID QUALIFYING CRITERIA (ESSENTIAL):
1.1.1 DETAILS OF CONSTITUTION OR LEGAL STATUS OF THE TENDERER: The Bidder should be a Company/Firm/Proprietorship having valid GSTN Registration and PAN in India. Essential-To Note, Confirm & upload the relevant documentary evidence.
1.1.2 Bidder shall be an Indian Vendor or else their tender will be rejected. Essential-To Note, Confirm & upload the relevant documentary evidence.
1.1.3 Bidder shall have Mandatorily CLASS III DSC from the authorised agency and got Registered with HAL E-portal to participate in the Open Tender. Essential-To Note, Confirm & upload the relevant documentary evidence.
1.1.4 The supplier shall furnish a Performance Bank Guarantee as per HAL’s format (Annexure- IV ) for 10% of the PO Value excluding GST from a scheduled bank in India and the same shall be valid up to end of the warranty period from the date of acceptance / commissioning or otherwise equivalent amount shall be retained till completion of warranty period and other obligation of Purchase Order / contract. In case Supplier does not agree for Performance Bank Guarantee / retention of equivalent amount from their invoice/bill, the offer would be summarily rejected Essential-To Note & Confirm
1.1.5 The Bidder shall sign the legal instruments like Non-Disclosure Agreement (NDA) as per the HAL prescribed format (Refer Annexure - V) against supply of drawings, process sheets, documents etc Including soft and hard copies by HAL for submission of competitive quote in the HAL E-Portal. Essential-To Note, Confirm & upload the relevant documentary evidence.
1.1.6 Experience:
a Vendor shall provide performance feedback from any one of their customer with contact details to whom similar Capacity for performing In Source of Tool Design Activity have been performed in the last 5 years. For this condition, Exemption not applicable for Start ups & MSE vendors. Essential-To Note, Confirm & upload the relevant documentary evidence.
b HAL reserves the right to verify the information by the vendor. In case the information is found to be false/ incorrect, the offer shall be summarily rejected. Essential-To Note, Confirm & upload the relevant documentary evidence.
1.1.7 Earnest Money Deposit (EMD): The bidder shall be required to deposit earnest money of Rs. 40,000/- (Rupees Forty Thousand only) for Indian Bidders. The EMD shall be submitted in Demand Draft/Banker’s Cheque/Wire Transfer only in favour of Hindustan Aeronautics Limited, payable at Bangalore and enclosed in a cover with tender reference and due date super scribed, and should reach the following address or the requisite amount to be Wire Transferred before Tender Closing date & Time. Chief Manager [External Source Department], Hindustan Aeronautics Ltd., Aircraft Division, Bangalore Complex, Bangalore-560017.India Ph : 080-22322243/1519 For Wire transfer, please make use of the following bank details: ACCOUNT NAME: HINDUSTAN AERONAUTICS LIMITED, AIRCRAFT DIVISION ACCOUNT NO: 39187601793 IFSC CODE : SBIN0001114 BANK NAME : STATE BANK OF INDIA, HAL BRANCH However EMD is exempted for PSUs, Other entities in the Govt Sector, MSEs Exempted by Govt Policy and foreign vendors. Vendor has to submit relevant documents MSME, Udyog Aadhaar etc., for claiming exemption. Essential-To Note, Confirm & upload the relevant documentary evidence.
1.2 Bidders to Note the following:
1.2.1 The bidder along with the bid shall furnish documentary evidence at the first instance itself to substantiate their claim meeting the requirement specified in the qualifying criteria. Qualification may be completed based on the details so furnished without seeking any subsequent additional information. Noted & Confirmed
1.2.2 Even though bidder meets all the criteria mentioned above, HAL reserves the right to assess the Bidder’s capability and capacity to perform the job, in the overall interest of HAL and HAL can reject the bid(s) at any time without assigning any reason and without incurring any liability to the affected bidders(s). Noted & Confirmed
1.2.3 Submission of BID (Techno Commercial) by any Unregistered Vendor of Aircraft Division, such Vendor will be assessed by the Technical Team during Technical Evaluation stage. Based on the outcome of the assessment report of the Technical Committee Vendor shall be Qualified/approved for opening of Commercial Bid. Noted & Confirmed
3. Pre-Bid Qualification Criteria
SL NO PRE-REQUISIT CRITERIA MANDATORY / DESIRABLE ACCEPTABLE / NOT ACCEPTABLE REMARKS
1 The bidder should be a registered company (Copy of certification of registration is required to be submitted by the bidder) Mandatory
2 Should have minimum one year hands on experience in Tool Design using Catia V5 software as outlined under the scope mentioned above. Mandatory
3 Bidders should provide details for the similar services rendered and the capacity of volumes handled. Mandatory
4 Personnel deployed by vendor should posses qualification of Diploma (Mechanical) or Graduate in Mechanical Engineering. Mandatory
5 Should have qualified, adequate, sustainable and trained manpower for designing tools with complete skill sets as per best industry standards. Mandatory
6 The design services provided should conform to the best industry standards and practices Mandatory
7 Shall ensure compliance to all regulatory and government laws including all labour laws of the country. Mandatory
4.TECHNICAL COMPLIANCE MATRIX (SCOPE OF WORK DESCRIPTION)
SL No. SCOPE DESCRIPTION MANDATORY/ DESIRABLE ACCEPTABLE / NOT ACCEPTABLE REMARKS
1A Aircraft Division (BC) HAL is establishing the facilities for manufacture of HTT-40 Aircraft. The division is looking forward to partner with the vendors who are willing to contribute to the aircraft structure jig design activities, through in-sourcing model. FOR INFORMATION
1B Vendor shall deploy the manpower to work in HAL Aircraft Division campus. FOR INFORMATION
2 SCOPE OF WORK
2A The BIDDER’s workforce shall be conversant with Aircraft Structure Jig design, calibration & manufacturing processes. The design activity will be executed using CATIA V5 software and hence knowledge on the CATIA V5 software is a mandatory requirement. The broad activities are as indicated below: I. Super imposition of Tool & latest Component models II. Design modification of the tool models based on the latest component models III. Drawing Corrections and Drafting IV. Generation of Tool Drawing Applicability List (TDAL) and CAD nominals V. Generation of design data/ drawings for machining of the modified tool components VI. Finalisation of documentation to the validated Design Issue Above scope to be carried out for each line activity. MANDATORY
3 DESCRIPTION OF ACTIVITIES
3A Activity-I: Super imposition of Tool with Latest component models Technical Inputs by HAL to the vendor: • CATIA V5 Tool models & Component models. • Drawing & Standards Scope of Supply of the Vendor: • Downloading & positioning aircraft & jig models to aircraft absolute position • Checking for alignment of all locking holes from tool to component • Checking for contour butting on all tooling butting locators w.r.t component • Study of component drawing matching to tool drawings MANDATORY
3B Activity-II: Design modification of the tool models based on the latest component models Technical Inputs by HAL to the vendor: • Concept design and technical guidance for design modification Scope of Supply of the Vendor: • Design modification for changes occurring on jig • Final 3D Model generation with parametric (editable) format MANDATORY
3C Activity-III: Drawing Corrections and Drafting Technical Inputs by HAL to the vendor: • Drawing & drafting standards Scope of Supply of the Vendor: • Existing drawings to be made with standard format by reorganising • Dimensioning and tolerance changes to be incorporated according to standard • Addition and deletion of drawing & dimensions in the existing drawings • Changes to be made in material schedule/Bill of material MANDATORY
3D Activity IV:Generation of Tool Drawing Applicability List (TDAL) and CAD nominal Technical Inputs by HAL to the vendor: • TDAL & CAD Nominal formats Scope of Supply of the Vendor • Identifying the tooling hole coordinates and capturing their absolute values • Identifying the ICY hole coordinates and capturing their absolute values • Indication of Contour plates/butting plates tolerances as per cad model • Identifying the issue level and sheets for inspection /calibration activities • all above points to be depicted in excel format MANDATORY
3E Activity-V:Generation of design data/ drawings for machining of the modified tool components Technical Inputs by HAL to the vendor: • 2D cad data in autocad format Scope of Supply of the Vendor: • Drawing support for manufacturing • Providing loft for manufacturing • Providing data in 2d format for waterjet machining • Identifying the different size of pins and giving data for manufacturing MANDATORY
3F Activity -VI: Finalisation of documentation to the validated Design Issue Technical Inputs by HAL to the vendor: • Technical guidance for preparation Scope of Supply of the Vendor: • Creation of master data base for tool drawings and its applicability for future reference MANDATORY
3G During tendering Pre-bid meeting will be conducted by HAL, with suppliers to ensure better understanding of scope of work. It is mandatory to attend Pre-bid meeting and provide confirmation for having understood the Scope in totality before submission of quote.Non Participation in the Pre bid meeting will lead to disqualify of the Technnical/Commercial Bids. MANDATORY
4 EXECUTION APPROACH
4A Selected vendor is required to execute the Tool design work at HAL premises utilizing HAL's facilities. MANDATORY
4B Up to 4-5 workstations will be provided to the vendor at any point of time and it is vendor’s responsibility to give coverage the working hours/shift(s) to complete the tool design activities stipulated in the contract. MANDATORY
4C HAL tool designers will provide conceptual requirements and technical guidance on the expected output from the vendor’s personnel. MANDATORY
4D HAL tool designer(s) will be made available to supervise the Tool design activity by vendors (including for working in II-shift/Holidays). MANDATORY
4E Payment will be advised based on the completion of design after duly certified by HAL Tool Design. MANDATORY
4F The Tool Design and drawing will be approved by Head of Tool Design department. MANDATORY
4G Payment to be processed after acceptance of the Tool Design & drawings submitted by the vendor. MANDATORY
5 DELIVERY SCHEDULE
5A All design activities should be completed for tools mentioned in Annexure-II with in 4 months duration from the date of PO placement and receipt of required technical data from HAL. (Refer Commercial Quote Format Delivery terms Condition No j) MANDATORY
6 VENDOR RESPONSIBILITY
6A Vendor is liable to adhere to data security restrictions at the time of contract. The existing models/ tool drawings will be supplied by HAL Aircraft Division. All the documents shall be kept in proper place without any damage and shall not be copied or taken out of HAL premises. MANDATORY
6B Subsequent amendments ,if any to the design/modelling should be done free of cost without any financial implication to HAL. MANDATORY
6C Vendor shall carryout design modifications and/or improvements suggested by the Head of Tool Design at no extra cost. MANDATORY
6D The vendor shall provide all logistics support to its manpower for the execution of the work at HAL Aircraft Division. MANDATORY
6E The entire activities are to be carried out are as per the instruction of HAL tool designers. MANDATORY
6F Sufficient manpower shall be engaged by the vendor for the activities. MANDATORY
6G Effective supervision shall be ensured by the vendor with qualified supervisor during executing Tool Design activities. MANDATORY
6H Separate logbook to be maintained by the vendor to record all the details of operations/ activities carried out on each day. MANDATORY
6 I The drawings shall be the property of HAL and shall not be used for any other purpose other than the purpose intended for without the written permission of HAL. MANDATORY
6J Vendor should pay minimum wages for respective category and vendor shall remit all the statutory payments like ESI & PF for personnel engaged by him. In case of non-applicability of ESI on his employees, the vendor should make an alternative insurance coverage for medical injuries / death of his employees. HAL will not be liable for any payments to the employees engaged by the vendor in this regard. MANDATORY
6K If required as per the stipulation under the contract labour (Regulation Act) Act, 1970, the vendor shall obtain and furnish valid registration certificate/ License issued by the Assistant Labour Commission-Central within 30 days of issue of Acceptance letter. MANDATORY
6L All disputes and differences arising out of or in connection with any matter under the contract including arbitration shall be tried by Courts situated in Bangalore only. MANDATORY
6M The Contractor shall employ labour, in sufficient number to maintain the required rate of progress and of equality to ensure workmanship of the degree required by the specification and to the satisfaction of the OIC/ EIC. The Contractor shall remain liable for the payment of all wages or other money to his work people or employees under the Minimum Wages Act, 1948,Payment of Wages Act, 1936, Employer Liability Act, 1933, Workmen’s Compensation Act, 1923, or any other Act or enactment relating there to and rules framed there under from time to time. The Contractor shall engage labour only on and during the hours of working day unless he obtains the prior written approval of the Engineer to do otherwise. If such approval is given no liability in respect of any excess cost arising there from shall be incurred by the Management. MANDATORY
6N Safety: The Persons deputed for carrying out the Service under this Contract shall follow Safety Instruction provided by the User / HAL Safety Department. The successful TENDERER (Contractor) must comply all statutory requirements pertaining to the state, or any Government agencies or authorities. The Contractor shall be solely responsible for any Injury or loss of life to their Employees during the execution of the work under this Contract. HAL shall have no liability what so ever in this regard for any reason, the Contractor is liable for any accident inside HAL Factory during the Contract period. Further, HAL shall not be responsible for any claim made by the Contractor’s workers or Government agencies/authorities and the Contractor shall keep HAL indemnified from and against any and all items in this regard. During the execution of this contract, damages if any is caused to HAL properties due to negligence of the Contractor Employees, the extend of damage shall be estimated after a survey by HAL and an equal amount shall be deducted from their outstanding bills. MANDATORY
7 GENERAL SCOPE
7A This shall be an onsite activity at Tool Engineering Department, HAL Aircraft Division using the workstations along with licensed design software’s available in Tool Design MANDATORY
7B The decision of the HAL Officer-in-charge is final with regard to the satisfactory performance of the contract and any matter arising out of that is binding on the contractor as decided by HAL. MANDATORY
7C The Vendor shall be responsible for any loss or damage caused to HAL property due to the negligence of the personnel engaged by him. The cost of such damage as decided by the Management shall be paid by the vendor or recovered from the amounts payable to the vendor. MANDATORY
7D HAL is not responsible for any injury/ loss of life, etc. caused to his personnel deputed for work; it is the sole responsibility of vendor to supervise the job and will be responsible for the safety. Vendor shall indemnify HAL for any loss of life, casualty or injury to his personnel or any loss or damage to the property of HAL. MANDATORY
7E It shall be the sole responsibility of the contractor to settle the dispute, if any, arising out of engagement between himself and the personnel engaged by him and Management of HAL shall not in any way be responsible, in the event, the personnel approach the Competent Authority, under any Act or law in the court. The entire expenses in this regard shall be borne by the contractor. MANDATORY
7F Designer assigned by the vendor must have adequate knowledge to carry out the Tool design activities per the tender requirement. However HAL Tool design dept. will assess the knowledge and technical competence of the designers for present scope and if found inadequate, vendor have to replace the designers with suitable designer inline to HAL requirement. MANDATORY
7G Design service shall be rendered six days a week (8 hour shift) i.e. 7.00am to 3:00 pm and 3:00 pm to 11.00pm and based on the need basis, service shall be rendered on Holidays or as as per the requirement of HAL Aircraft Division. MANDATORY
7H HAL reserves the right to reduce the number of tools loaded for tool design in case of exigency of tools. MANDATORY
7 I Vendor has to comply with IP rights and IT security norms as per the company and same to be ensure. MANDATORY
7J Necessary Police verification needs to be obtained by the contractor for their personnel well before their deputation to HAL. The same needs to be made available to our security department for issuing necessary daily or monthly passes. At all times the contractor will be liable to maintain utmost discipline and will be held responsible for any kind of mis-conduct by any of the professional. MANDATORY
7K Personnel engaged by the vendor shall comply with all safety regulations. The vendor will be responsible to compensate the personnel in the event of any accident. MANDATORY
7L HAL shall not be under any obligation for providing employment to any personnel of the contractor after expiry of the Purchase Order. HAL does not recognize any employee-employers’ relationship with any of the workers of the contractor engaged in HAL. MANDATORY
7M The personnel of the Contractor shall not be the employees of HAL and they shall not claim from HAL, any salary or allowances, compensation, damages or anything arising out of their deployment/ duty under this Contract. The Contractor shall make them known about this position in writing before deployment under this contract. MANDATORY
7N Vendor needs to execute confidentiality agreement related to the drawings or processes shared by HAL during the execution of the contract. MANDATORY
7 O The Purchase Order is terminable without any compensation to the contractor for the breach of contract for any of the terms and conditions herein contained or otherwise stipulated in the tender documents/ agreement. MANDATORY
7P If an extension is desired by the Sub-contractor, contractor shall apply for extension of time to HAL preferably 30days prior to the date of delivery without prejudice to the rights of HAL. Then, HAL may grant extension of time for any cause which HAL may deem proper and the decision of HAL in this respect to be final and binding. MANDATORY
7Q The Sub-Contractors shall not sub-let any portion of the contracted job without prior written approval of HAL. MANDATORY
7 R 50 % of total hours of 5,500 hrs (i.e. 2750 hrs) after complete execution of work can be placed on same vendor for additional work with the same man hour rate. MANDATORY
8 PAYMENT TERMS
8A 100 % payment will be made on approval / acceptance of respective designs by Tool Design department in co-coordination of head of Tooling Department for each line item as listed in Annexure-II. FOR INFORMATION
8B Payments will be made on submission of Invoice with Work Completion Certificate (to be duly vetted by HAL tool design Dept.) for each line activity listed in Annexure-II as and when completed. (Refer Commercial Quote Format Payment terms Condition No g) FOR INFORMATION
9A Submission of tendered quotation should be in Two Bid system. (Technical & Commercial Bid). The Tchincally qualified vendors will considered for opening of Commercial Quote MANDATORY
10 UNDERSTANDING OF REQUIREMENT
11A Must understand all technical requirements, ensure availability of all the data, drawings & models needed for fabrication and certification and answer with "YES" for this point which states that the vendor has all technical details, requirements are understood and would complete the project in time once awarded. FOR INFORMATION
12 PROPRIETARY:
12A The data / designs / intermediate tools generated during the execution of the contract will be the exclusive property of M/S. HINDUSTAN AERONAUTICS LIMITED, AIRCRAFT DIVISION, BANGALORE-560037, INDIA. FOR INFORMATION
13 DOCUMENTATION:
13A All the documents prepared by vendor for the project should only be in “ENGLISH”. FOR INFORMATION
The blank box highlighted in yellow colour shall be filled by the Vendor and uploaded the dully filled format with authorised seal and Signatory along with commercial quote Bid of the above E-Tender mandatorily.
DEFINITIONS & INTERPRETATIONS
HAL / COMPANY : Means Aircraft Division - HAL, who is interested to appoint a Supplier for the tendered service.
BIDDER / TENDERER : The firm / Agency who submits the bid / tender against this Invitation for Tender (IFT)
SUCCESSFUL BIDDER or TENDERER / Supplier / Vendor: The Bidder/Tenderer, whose bid/tender is accepted by HAL for award of Contract.
BID SHOULD BE SUBMITTED THROUGH E-PROCUREMENT (TWO BID SYSTEM)
HINDUSTAN AERONAUTICS LTD.,
AIRCRAFT DIVISION
COMMERCIAL QUOTE FORMAT
TELEPHONE: 080 - 22322243/22321519 HAL GSTIN : 29AAACH3641R1Z3
NATURE OF WORK:IN-SOURCING OF TOOL DESIGN ACTIVITY FOR HTT 40 PROJECT (OPEN TENDER -Two Bid System)
TENDER REFERENCE NO: A/OPEN TENDER/ESP/HTT40-28/1/24 Dtd 02.07.2024 Tender Due Date: 22-07-2024
VENDOR NAME : VENDOR ADDRESS :
VENDOR QUOTE REF: QUOTATION DATE:
VENDOR GSTIN: UDYAM REGISTRATION NO:
TYPE OF ENTERPRISE MEDIUM/ MICRO/SMALL WOMEN ENTER PRISES (YES/NO)
OWNER OF THE ENTERPRENEUR BELONGS TO SC /ST OR OTHERS GEM SELLER ID
TReDS REGISTRATION NO: SAC NO FOR SERVICE RENDERED
CONTACT PERSON & PHONE NO: E-MAIL ID
Sl Nos. NATURE OF SERVICE DESCRIPTION OF WORK Qty in Man Hours Vendor Quote Total Cost (In INR)
Unit Man Hour Rate (In INR)
1 IN SOURCING OF TOOL DESIGN ACTIVITY TOOL DESIGN INSOURCING OF FOLLOWING ACTIVITIES- TOOL/COMPONENT SUPER IMPOSITION,DESIGN MODIFICATION,DRAWING CORRECTION,TDAL/CAD NOMINAL,DATA FOR MACHINING,DESIGN ISSUE LEVEL DOCUMENTATION. LIST OF TOOLS AS PER ANNX-II & SCOPE OF WORK AS PER ANNX -III 5,500 0
A .Total Taxable Value (A+B+C) 0
Add : Statutory Taxes & Duties (i.e., GST wherever as Applicable)
CGST in % on Total Taxable Value (A) as applicable effective from 01.07.2017 - ( B ) 0.00% 0
SGST in % on Total Taxable Value (A) as applicable effective from 01.07.2017 - ( C ) 0.00% 0
IGST in % on Total Taxable Value (A) as applicable effective from 01.07.2017 - ( D ) 0.00% 0
GRAND TOTAL - ( Sum of A+B+C+D) 0
Validity of Quotes
Delivery Lead Time
Terms and Conditions Annexure-I, Annexure III and Scope of Work & Commercial bid notes (Acceptable / Not acceptable)
The price quoted is F.O.R, HAL, Aircraft Division, B'lore as per below terms and conditions: i) Vendor Scope Involves The design activity will be executed using CATIA V5 software and hence knowledge on the CATIA V5 software is a mandatory requirement. The broad activities are as indicated below: I. Super imposition of Tool & latest Component models. II. Design modification of the tool models based on the latest component models. III. Drawing Corrections and Drafting. IV. Generation of Tool Drawing Applicability List (TDAL) and CAD nominals. V. Generation of design data/ drawings for machining of the modified tool components. VI. Finalisation of documentation to the validated Design Issue.
a) Pre-Bid meeting: Attending Pre-Bid meeting is mandatory to provide confirmation for having understood the Scope in totality before submission of quote which is scheduled from 09.07.2024 to 11.07.2024. The Bidders should submit duly filled Omnibus NDA (Annexure V) and Tenderer / Bidder details, Bid and Pre-Bid Qualification Criteria i.e., Point No 01 to 03 of Annexure III before participating in Pre-bid Meeting through email/ by hand/ Courier. Technical bid of Non participated bidders in the Pre Bid meeting will be rejected without further proceedings. CATIA V5 Tool models & Component models /Drawing & Standards and process for submission of competitive quote will be shown only to the Bidders who has attended the Pre-bid meeting. The Vendor has to give prior confirmation by E-mail for attending the Pre-Bid meeting with furnishing the Representative names and Government ID proof for attending the Pre-Bid Meeting putting request to DGM (ES) to email id ([email protected]) & contact No: 080-22322243/1519.
b) The Statutory taxes as applicable (i.e,G S T) at the time of delivery to be indicated Explicitly in percentage as provision given in the above commercial quote format coloured with Yellow. In case if the Vendor has not indicated the Tax line structure in % or left blank or not given any qualification for applicability of taxes as provision given in the additional notes below, such quotes shall be considered as "Inclusive of all Taxes and Duties".
c) After Complete execution of work additional 2750 hrs can be placed on L1 vendor for additional work with the PO man hour rate if needed by HAL. which may Increase/Decrease from time to time based on our production Programme . The quotes of the Vendor shall be firm and fixed valid for 3 years period.
d) Identical Prices: In case Two or more bidder quotes the same price HAL reserves the right to seek revised offer from the same bidders and placing the order on the revised L1 offer. In case if the same situation prevails again then HAL reserve the right to place order on any one of them. When counter terms and conditions have been offered by a bidder HAL shall not be deemed to be governed by such terms and condition unless specific written acceptance there of has been given by HAL.
e) The offer is valid unless otherwise specified in the quote should remain valid for our acceptance for a minimum of 120 Days from the closing date of Tender.
f) Post Tender Correction: If the bidder request for any post Tender correction after opening of the Tender, such Tender is liable for Rejection or Disqualification.
g) Payment Terms: 100% Payment shall be released after completion of each tool line activity as listed in the Annexure-II. The line wise Work Completion Certificate along with actual No of Hours utilized against each tool line to be duly certified by HAL Tool Design Dept and same to be co ordinated and approved by Head of Tooling Department, Aircraft Division, Bangalore. Accordingly for claiming payment, bidder has to submit the invoice for the actual No of hours utilized as certified by Tool Design Department after completion of each tool line on weekly or monthly basis. No payment will be made for Partial / incomplete tool line activity for any reason.
h) Any minor changes in design, technology, nomenclature including changes in drawing number, part number, Higher Issues, change in dimensions or change in material specification or etc against each tool line activity as mentioned in Annexure II Parts does not entail an increase in unit SMH by more than 5% vendor should absorb the changes voluntarily with out additional cost / claim for the applicable hours.
i) Vendor can enter "0" Values for partial Regrets for Line Wise Items, since the cells accept only "numerical values" and In case if they want to regret the whole Tender, "Regret" can be qualified in the additional notes as provision given below.
j) Delivery Lead Time: The bidder has to start deputing tool designers with in 02 weeks of order acceptance. All design activities should be completed for tools mentioned in Annexure-II with in 4 months duration from the date of PO placement and receipt of required technical data from HAL. Liquidated Damages (LD) will be deducted at the rate of 0.5% of the invoice value , delivered late for each week of delay subject to a maximum of 5 % of the invoice value. The contract period will be effective for 01 year or completion of RFQ man hours or tool design activity of the contract, which ever is earlier. The contract may be extended further for another 06 months with mutual consent in writing in case the number of man hours not been exhausted.
k) Deviation Statement: Company will appreciate submission of offer based on the terms and conditions in the "RFQ" & “Scope of Service”, etc. to avoid wastage of time and money in seeking clarifications on technical / commercial aspect of the offer. Any deviation in reference to Commercial Terms & Conditions and its justifications must be submitted in the Deviation Statement format as per Annexure - VI of RFQ Document only.
l) Safety: HAL is not responsible for any injury/ loss of life, etc. caused to his personnel deputed for work; it is the sole responsibility of vendor to supervise the job and will be responsible for the safety. Vendor shall indemnify HAL for any loss of life, casualty or injury to his personnel or any loss or damage to the property of HAL.
m) Loss / Damage: The Vendor shall be responsible for any loss or damage caused to HAL property due to the negligence of the personnel engaged by him. The cost of such damage as decided by the Management shall be paid by the vendor or recovered from the amounts payable to the vendor.
m) Earnest Money Deposit (EMD): The bidder shall be required to deposit earnest money of Rs. 40,000/- (Rupees Forty Thousand only) for Indian Bidders. The EMD shall be submitted in Demand Draft/Banker’s Cheque/Wire Transfer only in favour of Hindustan Aeronautics Limited, payable at Bangalore and enclosed in a cover with tender reference and due date super scribed, and should reach the following address or the requisite amount to be Wire Transferred before Tender Closing date & Time. Deputy General Manager [External Source Department], Hindustan Aeronautics Ltd., Aircraft Division, Bangalore Complex, Bangalore-560017.India Ph : 080-22322243/1519 For Wire transfer, please make use of the following bank details: ACCOUNT NAME: HINDUSTAN AERONAUTICS LIMITED, AIRCRAFT DIVISION ACCOUNT NO: 39187601793 IFSC CODE : SBIN0001114 BANK NAME : STATE BANK OF INDIA, HAL BRANCH, However EMD is exempted for PSUs, Other entries in the Govt Sector, MSEs Exempted by Govt Policy and foreign vendors. Vendor has to submit relevant documents like MSME, Udyog Aadhaar etc., for claiming exemption.
n) Risk Purchase: In case the supplier fails to execute the order in time either in terms of quality and quantity, HAL reserves the right to procure from elsewhere at the risk and the cost of the supplier and any extra expenditure incurred due to this purchase is payable by the supplier. In case the order is not executed to the entire satisfaction of HAL the Performance Bank Guarantee shall be forfeited. Besides intimation of risk purchase action.
o) Performance Bank Guarantee: The supplier shall furnish a Performance Bank Guarantee as per HAL’s format (Annexure- IV ) for 10% of the PO Value excluding GST from a scheduled bank in India and the same shall be valid up to end of the warranty period from the date of acceptance / commissioning or otherwise equivalent amount shall be retained till completion of warranty period and other obligation of Purchase Order / contract. In case Supplier does not agree for Performance Bank Guarantee / retention of equivalent amount from their invoice/bill, the offer would be summarily rejected
p) The Vendor has to Upload the duly filled and authorised signed copy of TECHNICAL COMPLIANCE MATRIX CUM SCOPE OF WORK (ANNEXURE-III) along with commercial Quote Bid of the above E-Tender Mandatorily for Evaluation of offer Technically by TEC. The blank box highlighted in yellow colour of the Scope of work Compliance Matrix - Annexure III shall be filled by the Vendor. Any Vendor quote technically Dis-Qualified by TEC such Commercial Bid quote will not be opened.
q) The other general terms and conditions will be indicated in Annexure-I. The Vendor should submit the Commercial Quote taking in to consideration of all the Annexures and Scope of Work as as referred in the RFQ
r) Supplier (Vendor) should have Security Clearance issued by concerned Police Authorities and should have clear Police Verification Report (PVR) at all times in their possession to be issued to the Purchaser (Vendee) on specific demand.
s) Vendor should submit Signed Omnibus Non-Disclosure Agreement (NDA) as per the format given which will be valid for 03 to 05 years period.
t) Confidentiality: For the purpose of this Tender/Contract/Agreement ,The Bidder/Contractor/Supplier shall not store, copy or disclose HAL's data and information whether in written, machine readable or other tangible form or disclosed orally, that is of value to HAL. Also Bidder/Contractor/Supplier agrees to use HAL's data only for the purpose under this Tender/Contract/Agreement, restrict disclosure to any other person or entity or Third party and shall safeguard the provided data including from Cyber security risks etc. Bidder/Contractor/Supplier should promptly return within 90 Days HAL's data in original media and should not keep HAL's data, upon expiry of Tender/Contract/Agreement or early termination of Contract /Agreement and certify that HAL's data has been deleted permanently. Non- Adherence to this confidentiality clause by The Bidder/Contractor/Supplier shall be treated, as a material breach of this Tender/Contract/Agreement. The provisions of this clause shall survive and remain in force notwithstanding the termination or expiry of this Contract/ Agreement
u) Bidders are advised, in their own interest, to ensure that their bids are submitted well before the "Due Date & Time of Bid-Submission" of the Tender as HAL's "e-Procurement System" at https://eproc.hal-india.co.in will not allow submission of bids once the closing date and time of the Tender (i.e., Due Date & Time of Bid-Submission) is reached. HAL shall not be responsible, if bidder is not able to submit the bid on account of failure in network / internet connect. Quotation sent by any other modes like e-mail/Fax/Courier/Post/ Hand drop will be not be considered for evaluation. For general correspondence kindly mail to [email protected]
v) Register on TReDS Platform: “HAL is registered on TReDS Platform (Trade Receivables Discounting Systems), as being promoted by Government of India directive. It is suggested that all the MSME vendors to take note of the same and consider for registering on any TReDS platform and avail the platform services which is being made available as per the Government Initiative.
HAL has not appointed any agent in India or outside India for procurement of any items and deals directly with Vendors. In case any individual or firm approaches you posing themselves as an authorized agent of HAL. It is requested that you should not entertain such claim and in addition inform immediately to DGM (External Source Department) Aircraft Division, HAL, Bangalore" .
Additional Notes if any:
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
e-Tender-Notification-OPEN-TENDER.DOC.pdf
TENDER_DOCUMENT • 0.16 MB
ANNEXURE-III-TECHNICAL-BID-HTT40-28-NEW.xlsm
TENDER_DOCUMENT • 0.03 MB
ANNEXURE-I-GENERALTERMSANDCONDITIONS.doc
TENDER_DOCUMENT • 0.07 MB
COMMERCIALQUOTEFORMAT-HTT40-28-OPEN-TENDER-NEW.xlsm
TENDER_DOCUMENT • 0.03 MB
ANNEXURE-II-LIST-OF-TOOLS.pdf
TENDER_DOCUMENT • 0.54 MB
ANNEXURE-IV-PERFORMANCE-BANK-GAURANTEE.doc
TENDER_DOCUMENT • 0.03 MB
ANNEXURE-V-OMNIBUS-NDA-FORMAT.doc
TENDER_DOCUMENT • 0.07 MB
ANNEXURE-VI-DEVIATION-STATEMENT.doc
TENDER_DOCUMENT • 0.04 MB
Additional-Terms-and-Conditions-Insource-of-Design-Activities..pdf
TENDER_DOCUMENT • 0.08 MB
RTGS-NEFT-FORMAT.doc
TENDER_DOCUMENT • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .