Loading
Loading…
Loading…
Tender Value
₹5.4 Cr
EMD Value
₹4.2 L
Closing Date
13 Jan 2026, 3:30 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
90 days
Expenditure
Capital (Works)
Above/Below/Par
CONS
14 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB(GCC) of tender document, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: •Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or •Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or •One similar work each costing not less than the amount equal to 60% of advertised value of the tender.
Defination of Similar Work :- Any industrial electrical installation work involving voltages of 415 volts or greater
24 conditions · 10 needing a document upload
The tenderer should submit the consent in a mandate form of Enclosure-1 for receipt of payment through NEFT
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Certificates which may be an attested Certificate from the client, Audited Balance Sheet duly certified by the Chartered Accountant etc regarding contractual payments received in the past
Tenderer shall indicate their GSTIN No. & PAN No. with proper document proof.
If the tenderer wish to submit Bank guarantee for bid security (EMD), the Tenderer shall download the Tender Document Annexure -VI A for bid security in the form of bank guarantee and upload the Annexure -VI A duly filling the necessary details. The original Bank Guarantee should be delivered in person to Office of the PCEE, II floor, Shell Administrative building, ICF, Chennai - 600 038 before closing date for submission of bids (i.e. excluding the last date of submission of bids)
Startups are not exempted from satisfying the Eligibility criteria for this tender.
The Tenderer shall have valid required level Electrical License. Attested copy of the Electrical License shall be submitted along with the offer.
The successful tenderer shall prepare and submit the Scheme for wiring along with layout of arrangement of Electrical switchgear drawings according to the site and obtain approval from the competent authority or their authorized representative prior to the commencement of work.
After completion of all wiring and installation, the successful tenderer shall submit 3 sets of General arrangement and Schematic drawings along with the electrical wiring documentation.
The rate quoted shall be net inclusive of all taxes (GST) and duties.
The Contractor has to engage only Police verified Pvt. labour /Pvt. Employee. If any new person (other than already verified) to be engaged by the contractor, he has to submit proof of Police verification application for issuing a "Temporary permission" like present permit system. However, Contractor has to arrange PV report within permissible period of one month.
The tenderer shall download the Tender Document Annexure -I and upload the Annexure -I duly filling the necessary details.
Electrical works for Construction of 3 Sheds viz., i). Construction of 145M x 20M Shed (1 bay - 2 lines). ii). Construction of 48M(W) x 78M(L) Shed (Proposed Paint shed - 3 bays & 6 lines). iii). Extension of existing MUTP Stores Shed 60x20M on the Southern side of Shop-19. (under VB-II Coach Project)
2025245212034R~ICF
2025245212034R
Open
Works - General
12 Months
Chennai, Tamil Nadu
₹0
₹4.2 L
13 Jan 2026
22 Dec 2025
30 Dec 2025
391 items across 3 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 2,26,77,174 | ||
| — | 2.00 | — | — | ||
| Supply & erection of LT Panel board consisting of 3 no's of 1000 A, 4 pole, 65 kA ACB panel with top bus bar arrangement for connecting BBT (only for 2 ACBS) as per ICF Specification. | — | — | — | 14,83,402 | |
| — | 2.00 | — | — | ||
| Supply & Erection of 8 way SMDB with incomer as 400A TPN 36KA Thermal magnetic release MCCB-1 No and outgoing as 100A TP 25KA MCCBs - 8 Nos along with required metering box fitted with 3 no's 96 x 96 Digital Ammeter for individual phases and 1 no 96x96mm 3 phase Digital Volt meter and 1 No Selector switch and provision of left & right side cable end boxes & 4 no's corner filler boxes and base mounting assembly to be provided at bottom and RYB indication with required CTs and necessary wiring for Meters, Lamps, CTs, Complete set as per ICF Specification. | — | — | — | 3,92,534 | |
| — | 1.00 | — | — | ||
| Supply of Two bay lighting and ventilation control cubicle panel including all components like four knife switch isolators, contactors, timer etc., as per ICF drawing ICF/EL-1550 (3 Sheets) and as per ICF Specification. | — | — | — | 1,98,275 | |
| — | 1.00 | — | — | ||
| Installation, Testing and commissioning of lighting and ventilation panel with MS channel, grouting bolts and other masonry materials as per ICF Specification. | — | — | — | 7,057 | |
| — | 1000.00 | — | — | ||
| Supply of 300 Sq.mm, 3 1/2 core, XLPE LT, AL, Armoured, UG Cable as per ICF Specification. | — | — | — | 13,94,000 | |
| — | 500.00 | — | — | ||
| Supply of 185 Sq.mm, 3 1/2 core, XLPE LT, AL, Armoured, UG Cable as per ICF Specification. | — | — | — | 5,24,000 | |
| — | 500.00 | — | — | ||
| Supply of 70 Sq.mm, 4 core, XLPE LT, AL, Armoured, UG Cable as per ICF Specification. | — | — | — | 1,90,500 | |
| — | 500.00 | — | — | ||
| Supply of 35 Sq.mm, 4 core, XLPE LT, AL, Armoured, UG Cable as per ICF Specification. | — | — | — | 1,19,000 | |
| — | 500.00 | — | — | ||
| Supply of 16 Sq.mm, 4 core, XLPE LT, AL, Armoured, UG Cable as per ICF Specification. | — | — | — | 60,000 | |
| — | 500.00 | — | — | ||
| Supply & laying of single core, 240 Sq.mm multistrands, PVC insulated flexible Copper cable as per ICF Specification. | — | — | — | 9,45,500 | |
| — | 3000.00 | — | — | ||
| Laying of LT XLPE Aluminum and Copper cables up to 300sq.mm, in cable trays/trenches as per ICF specification. | — | — | — | 1,02,000 | |
| — | 240.00 | — | — | ||
| Supply & laying of 4 core, 25 Sq.mm armoured Copper cable as per ICF Specification. | — | — | — | 5,38,080 | |
| — | 480.00 | — | — | ||
| Supply & laying of 4 core, 10 Sq.mm armoured Copper cable as per ICF Specification. | — | — | — | 4,66,080 | |
| — | 100.00 | — | — | ||
| Supply & Erection of End termination of UG Al cable 3.5/4 core, upto 50 sq.mm with all required items like proper glands and crimping sockets, hardware, crimping paste etc., as per ICF Specification. | — | — | — | 37,000 | |
| — | 20.00 | — | — | ||
| Supply & Erection of End termination of UG Al cable 3.5/4 core, 70/120/185 sq.mm with all required items like proper glands and crimping sockets, hardware, crimping paste etc., as per ICF Specification. | — | — | — | 11,300 | |
| — | 20.00 | — | — | ||
| Supply & Erection End termination of UG Al cable 3.5 core, 240/300/400 sq.mm with all required items like proper glands and crimping sockets, hardware, crimping paste etc., as per ICF Specification. | — | — | — | 14,600 | |
| — | 20.00 | — | — | ||
| Supply & Erection of End termination of flexible copper cable of size 240 sq.mm with all required items like proper glands and copper crimping sockets, hardware, crimping paste etc., as per ICF Specification. | — | — | — | 5,000 | |
| — | 116.00 | — | — | ||
| Supply of MS hot dip galvanized Cable tray of size 300mm (W) x 2500mm (L) x 100 mm (H), to type no.4 of Drg. No. ICF/EL/1236 as per ICF Specification. | — | — | — | 8,95,404 | |
| — | 290.00 | — | — | ||
| Fixing and interconnection of Cable Tray of size up to 500mm in walls/pillars and supporting it with proper clamps and harware as per ICF specification. | — | — | — | 65,830 | |
| — | 10.00 | — | — | ||
| Supply, Fabrication, Erection and painting of 50 x50 x 6 MS angles/MS Square Tubes/MS Channels for supporting cable trays and all Types of Electrical Controls Boxes as per ICF Specification. | — | — | — | 11,16,180 | |
| — | 270.00 | — | — | ||
| Supply, installation, testing & commissioning of Sandwich type, 800A bus bar trunking system with Aluminum bus bar, minimum 50kA, for 1 Sec, IP54 min Protection, 415V, plug in bus duct with 100% neutral, 50% integral earth without external earth strip, minimum Class B insulation, 1.6mm thickness electro galvanized sheet steel enclosure, painting, Straight length with 3 tap-off point in a 3mtr length as per ICF Specification.(Quote for 1 mtr length) | — | — | — | 47,97,900 | |
| — | 4.00 | — | — | ||
| Supply & installation of flange end with cable end box suitable for 800A Bus bar truncking system with aluminum cable glanding as per ICF Specification. | — | — | — | 85,740 | |
| — | 4.00 | — | — | ||
| Supply of End Cover (suitable for Sandwich type, 800A busbar trunking system with aluminum bus bar) as per ICF Specification. | — | — | — | 8,576 | |
| — | 6.00 | — | — | ||
| Supply, Fabrication, Painting and Erection of ISMC 100mm x 75mm, angles and flats of various sizes as per ICF Specification. | — | — | — | 4,57,356 | |
| — | 2.00 | — | — | ||
| Supply, Fabrication, Painting and Erection of ISMC 150mm x 75mm, angles and flats of various sizes as per ICF Specification. | — | — | — | 1,52,452 | |
| — | 24.00 | — | — | ||
| Supply, installation & testing of 125A, TPN tap off box fitted with MCCB+ ROM+ Spreader links trunking suitable for plugging to 800A bus bar trunking system as per ICF Specification | — | — | — | 5,75,904 | |
| — | 24.00 | — | — | ||
| Supply & erection of 3 pole 125 A, MCCB 415 V 36 KA, and 125 A 3P+N+E Three phase De-Contactor Plug & Socket assembled in IP -55 enclosure Box as per ICF Specification. | — | — | — | 7,39,608 | |
| — | 24.00 | — | — | ||
| Supply, installation & testing of 63A, TPN tap off box fitted with MCCB+ ROM+ Spreader links trunking suitable for plugging to 800A bus bar trunking system as per ICF Specification | — | — | — | 5,41,776 | |
| — | 24.00 | — | — | ||
| Supply of 63 A, 415 V, three phase Modified De- contactor Box with MCB, RCCB and Earth Continuity monitoring circuit as per ICF Specification. | — | — | — | 4,33,608 | |
| — | 24.00 | — | — | ||
| Erection, Testing and Commissioning of 63 A, 415 V, three phase Modified De- contactor Box with MCB, RCCB and Earth Continuity monitoring circuit as per ICF Specification. | — | — | — | 7,440 | |
| — | 990.00 | — | — | ||
| Supply of Single Phase, Two Circuits (4 Live conductors) Lighting Bus way 40 Amps, Straight length with Tap-off provision along with blanking plate as per ICF specification. (Quote for 1 mtr length) | — | — | — | 12,24,630 | |
| — | 7.00 | — | — | ||
| Supply of End Feed units with cover suitable for Lighting Bus Bay 40 amps (4 Conductors) as per ICF specification. | — | — | — | 15,162 | |
| — | 990.00 | — | — | ||
| Erection (laying, Fixing, suspension), Testing and Commissioning of Lighting Bus way 40 Amps of Straight length with all accessories like, End feed unit, fixing bracket, Tap-off units, 12mm threaded rod and all other accessories as per ICF specification. | — | — | — | 1,09,890 | |
| — | 72.00 | — | — | ||
| Supply of 16 Amps Single phase Tap-off unit with fuse, L+N+E as per ICF Specification. | — | — | — | 32,616 | |
| — | 6.00 | — | — | ||
| Supply and Erection of 230/ 24 V, 3 kVA safety transformer with fixing frame and required hardware and termination of cables as per ICF specification. | — | — | — | 2,08,470 | |
| — | 24.00 | — | — | ||
| Supply and Erection of plug and socket box with 3 no's of 24 volts butt type BCH plug and socket controlled with 1 no of 16 A Double pole MCB and 3 nose of 10Amps Double pole MCB in sheet steel enclosure as ICF drawing and as per ICF Specification. | — | — | — | 1,13,712 | |
| — | 6.00 | — | — | ||
| Supply and Erection of 7.5KVA 415/110V Transformer with 32 A DP MCB as Incomer & 125A DP SFU as outgoing mounted in a sheet steel enclosure of 2mm thickness along with fixing stand as per ICF Specification. | — | — | — | 4,16,670 | |
| — | 430.00 | — | — | ||
| Supply of 2 core 16 sq.mm armoured copper cable for incoming to 7.5 KVA transformer as per ICF specification. | — | — | — | 1,87,480 | |
| — | 24.00 | — | — | ||
| Supply of 110 V AC Plug and Socket in Distribution board completely wired and with all accessories similar to KAEDRA Distribution system of M/s. Schnider Electric consisting of the following to ICF Specification: - a) Kaedra Distribution Board similar to Cat No. 13176-1 No. b) Wander Plug 16A, 2P+E, PK, IP44 similar to Cat No.PKE 16M413-----2Nos. c) Panel Socket 16A, 2P+E, PK, IP67, similar to Cat No. PKF16F413----2Nos d) C60N, 16A, 2P MCB 'C' Curve ----2 Nos. The Cat Nos. referred are of M/s. Schnider Electric as per ICF specification. | — | — | — | 1,14,240 | |
| — | 24.00 | — | — | ||
| Erection of 110V AC plug and socket box as per ICF Specification. | — | — | — | 13,968 | |
| — | 24.00 | — | — | ||
| Supply of Control panel for air circulator to ICF drawing no. ICF/EL/1513 Alt 'b' and as per ICF specification. | — | — | — | 1,34,184 | |
| — | 24.00 | — | — | ||
| Erection of Control panel for Air circulators and as per ICF specification. | — | — | — | 5,424 | |
| — | 48.00 | — | — | ||
| Supply of BLDC Heavy Duty Wall mounting Air circulators of Sweep 24" (600mm) dia as per ICF Specification. | — | — | — | 8,43,600 | |
| — | 48.00 | — | — | ||
| Erection of 600 mm sweep Air circulator with proper framework and termination with 1.5 Sq.mm PVC flexible copper cable run from the control panel as per ICF Specification. | — | — | — | 23,184 | |
| — | 14.00 | — | — | ||
| Supply of 18 W (4 feet) LED Tube Light & Batten as per ICF Specification. | — | — | — | 6,832 | |
| — | 14.00 | — | — | ||
| Fixing of 18 W LED Tube Light Luminaire & Batten as per ICF Specification. | — | — | — | 546 | |
| — | 26.00 | — | — | ||
| Supply of 10 Amps Single phase Tap-off unit with fuse, L+N+E as per ICF specification. | — | — | — | 9,178 | |
| — | 14.00 | — | — | ||
| Supply of 150 W LED High Bay Industrial Luminaire Fitting with IP-66 (min) Protection powder coated die - cast aluminum housing with weatherproof gasket for lamp and control gear for Industrial application. (Scope Includes all Accessories as per ICF Specification). | — | — | — | 2,78,446 | |
| — | 14.00 | — | — | ||
| Fixing Testing and Commissioning of 150W LED High Bay Light Fitting in roof with supply and fabrication of suitable bracket in necessary fixing hardware as per ICF Specification. | — | — | — | 8,876 | |
| — | 12.00 | — | — | ||
| Supply & erection of 230V AC Socket Box consisting of 2P, MCB 1 No & RCCB (30mA sensitivity) 1 No with 16A Socket as per ICF Specification | — | — | — | 51,492 | |
| — | 2.00 | — | — | ||
| Supply and Erection of Battery Charger with output of 110V DC, 200 amps suitable for working with 415 V, 3 phase Incoming supply as per ICF specification. | — | — | — | 5,89,470 | |
| — | 24.00 | — | — | ||
| Supply and erection of 110 V, DC Plug and Socket in distribution board completely wired and with all accessories consisting of a). 1 no. of Plug & Socket box with SP MCB Cut out (Make BCH: SSEU303-SSC-MCB 1P) b). 1 No of Panel mounting socket (make BCH: 2415B) c). 1 No of Plug with included Handle 9 Make BCH: 215B) d). 1 No of 32 A, SP MCB as per ICF Specification. | — | — | — | 1,55,112 | |
| — | 24.00 | — | — | ||
| Supply and Erection of 8"x 4" MS Junction Box with 5 Terminal SMC pad consisting of 5 no's of 6mm studded terminal suitable for 32A amps rating as per ICF Specification | — | — | — | 8,256 | |
| — | 8.00 | — | — | ||
| Supply and Installation of 2-way Roof Mounted Over Headline Supply indication light Box as per as per enclosed ICF specification. | — | — | — | 14,624 | |
| — | 534.00 | Each Span | — | ||
| Supply and Running Of 3 runs of PVC, FRLS 1.5 sq.mm copper cable (Red, Black, Green) in 1" PVC conduit/Casing Capping and accessories duly fixing the conduit in wall using hardware. Contractor scope of supply includes PVC conduit, PVC cable, PVC accessories, hardware etc., as per ICF Specification. (One span shall consist of one metre length of 3 runs of single core 1.5 sq.mm cable, PVC pipe, PVC accessories and Hardware etc.,) | — | — | — | 48,594 | |
| — | 908.00 | — | — | ||
| Supply and Running Of 2 no's of 2.5 sq.mm PVC, FRLS copper cable and 1 no. of 1.5 sq.mm PVC copper cable in 1" PVC conduit/Casing Capping and accessories duly fixing the conduit in wall using hardware. Contractor scope of supply includes PVC conduit, PVC cable, PVC accessories, hardware etc., as per ICF specification. (One span shall consist of one meter length of 2 runs of single core 2.5 sq.mm & 1 run of 1.5 sq.mm cable, PVC pipe, PVC accessories and Hardware etc.,) | — | — | — | 99,880 | |
| — | 10.00 | — | — | ||
| Supply of 45W LED Street light fitting with IP protection as per ICF Specification. | — | — | — | 30,530 | |
| — | 10.00 | — | — | ||
| Fixing, Testing & Commissioning of 45W LED Street light fitting as per ICF Specification. | — | — | — | 1,900 | |
| — | 24.00 | — | — | ||
| Supply & erection of DB for pit light with consisting of Incoming : 32A 24V AC MCB- 1No Outgoing : 6A 24V AC MCB-4 Nos as per ICF specification. | — | — | — | 2,64,000 | |
| — | 24.00 | — | — | ||
| Supply & installation of waterproof junction box with glands & terminals studs-sintex 2817JB as per ICF Specification. | — | — | — | 28,320 | |
| — | 144.00 | — | — | ||
| Supply of 18 watts, LED luminaire for Pit line lighting as per ICF Specification. (with LED lamps of ultra bright white light) | — | — | — | 4,97,664 | |
| — | 144.00 | — | — | ||
| Erection of 18 watts, LED luminaire for Pit line lighting as per ICF Specification. | — | — | — | 1,20,096 | |
| — | 5.00 | — | — | ||
| — | 10.00 | — | — | ||
| — | 500.00 | — | — | ||
| — | 500.00 | — | — | ||
| — | — | — | 21,500 | ||
| — | 10.00 | — | — | ||
| — | — | — | 6,230 | ||
| — | 2.00 | — | — | ||
| — | — | — | 48,604 | ||
| — | 2.00 | — | — | ||
| — | — | — | 4,320 | ||
| — | 500.00 | — | — | ||
| — | — | — | 2,48,500 | ||
| — | 1.00 | — | — | ||
| — | — | — | 4,287 | ||
| — | 250.00 | — | — | ||
| — | — | — | 1,06,250 | ||
| — | 250.00 | — | — | ||
| Laying of 50 pair, Armored U.G. Telephone Cable in tray as per ICF Specification | — | — | — | 17,500 | |
| — | 300.00 | — | — | ||
| Supply of 5 Pair PVC Switch Board Cable with 0.5mm dia Copper Conductor Conforming to latest TEC Spec. TEC Specn. No. G/WIR-06/02 OF MAY'1994 or latest. | — | — | — | 36,600 | |
| — | 300.00 | — | — | ||
| Supply of 6 UTP Cable as per ICF specification. | — | — | — | 8,400 | |
| — | 300.00 | — | — | ||
| Supply & installation of 1" Rigid PVC Conduit with all accessories duly inserting the telephone & Cat 6 cable as per ICF Specification. | — | — | — | 11,100 | |
| — | 10.00 | — | — | ||
| Supply & installation of Dual I/O Face plate with IO Jack CAT6 as per ICF specification. | — | — | — | 5,490 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .