Rehabilitation of Satanli Feeder from K.M. 0.000 to 36.523 (Tail)

Amount

Lining with design mix concrete of grade M-15 with minimum cement content 240kg/cum, 100mm thick in curve portion and side slope manually including rendering with cement sand (1:3) slurry, from work and preparation of sub grade with paver (HSR 14.10.2.2)

Lining with design mix concrete of grade M-15 with minimum cement content 240kg/cum, 75 mm thick in curve portion and side slope manually including rendering with cement sand (1:3) slurry, from work and preparation of sub grade with paver (HSR 14.10.1.2)

Providing and laying in position ready mixed plain cement concrete M-15, with cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for plain cement concrete work, including pumping of R.M.C from transit mixer to site of laying and curing, excluding the cost of centering shuttering and finishing including cost of curing, admixtures in recommended proportions as per IS:9103 to accelerate/ retard setting of concrete, improve work ability without impairing strength and durability as per direction of the Engineer-in-Charge.(Note:- Less cement used as per design mix is recoverable. However no extra payment shall be made if excess cement is used as per design mix for sleepers). M-15 grade plain cement concrete (cement content considered @240kg/cum) HSR 6.22.2.2)

Demolishing brick work manually / by mechnical means including stacking of serviceable material and disposal of unserviceable material with 50 mtr. Leads as per direction of Engineer-in-Charge in cement mortar (HSR 5.7.4)

Dressing side slopes and preparation of sub grade for lining by mechnical / mannual means (HSR 14.2)

Filling construction joints, with special impervious hot pour,12.5 mm wide (HSR 6.58)

Washing surface scrubing with brushes (OLD HSR 1988)

Earthwork in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead i/c all leads and lift as directed by Engineer-in-Charge (HSR 4.12.1)

Credit of Brick Work

M/s Bishan Parkash and Company

meharchand