REPAIR TO STEEL FURNITURE AT FURNITURE YARD FORTWILLIAM UNDER GE (CENTRAL) KOLKATA

Amount

Removal of following existing unserviceable steel/wooden components of various MES furniture items or similar items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, pinning, screwing nailing,welding, glueing, providing hinges,applying putty to level the surface, placing every part in-tact and painting the disturbed portion & painting steel surface with two coats of synthetic enamel paint of existing shade with spray gun & apply red oxide primer where ever required after properly smoothening the surface with sand paper. Top shall be 18 mm thick exterior grade pre-laminated Particle board one side laminated as per existing shade or as approved by BSO/GE, duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive. All kind of work will be executed where the furniture exist in different User Units of GE(Central) including BSO's Furniture Yard at Fort William, and office hours only as directed by Engineer-in-Charge. (Applicable for item Srl No-1.01 to 16.05).

Almirah small steel:-FD-1032:- 3-Way locking system as per drg.

Lock as per existing pattern and shape.

CP Handle as approved by BSO/GE irrespective of what is shown on drg.

Leg as per drg.

Repairs to dented door by removing the door from hinges, making smooth and straight by denting applying putty and refixing by replacing unserviceable hinges.

Repairs to existing shelf by opening the clips/rivets of shelf, making smooth and straight by denting applying putty and refixing by replacing unserviceable clips/rivets.

Supply & Fixing of new shelf by opening the clips/rivets and refixing by replacing unserviceable clips/rivets.

Supply & Fixing new door by removing the door from hinges, and refixing by replacing unserviceable hinges.

Painting of Almirah small steel as per Note.

Almirah large steel:- FD-1031:- 3-Way locking system for almirah large as per drg.

Lock as per existing pattern and shape.

CP Handle as approved by BSO/GE irrespective of what is shown on drg.

Leg as per drg.

Repairs to dented door by removing the door from hinges, making smooth and straight by denting applying putty and refixing by replacing unserviceable hinges.

Repairs to existing shelf by opening the clips/rivets of shelf,making smooth and straight by denting applying putty and refixing by replacing unserviceable clips/rivets.

Supply & Fixing new shelf by opening the clips/rivets and refixing by replacing unserviceable clips/rivets.

Supply & Fixing new door by removing the door from hinges, and refixing by replacing unserviceable hinges.

Painting of Almirah large steel as per Note.

Almirah large steel 1/2H 1/2 S:- FD/E6/MAP/18:- 3-Way locking system for almirah large Steel 1/2H 1/2S as per drg.

Lock as per existing pattern and shape.

CP Handle as approved by BSO/GE irrespective of what is shown on drg.

Leg as per drg.

Repairs to dented door by removing the door from hinges, making smooth and straight by denting applying putty and refixing by replacing unserviceable hinges.

Repairs to existing shelf by opening the clips/rivets of shelf,making smooth and straight by denting applying putty and refixing by replacing unserviceable clips/rivets.

Supply & Fixing new shelf by opening the clips/rivets and refixing by replacing unserviceable clips/rivets.

Supply & Fixing new door by removing the door from hinges, and refixing by replacing unserviceable hinges.

Supply and fixing of 20 mm dia Chromium plated steel conduit pipe hanger rod.

Repairs to dented drawer by removing the drawer, Making smooth and straight by denting applying putty.

Painting of Almirah large steel 1/2H 1/2S as per Note.

Bed hard :- FD/E6/MAP/08(R):- Taking out existing broken plywood from the bed hard by loosening the nut bolts with washers. S&F of new 12 mm thick BWR grade plywood fixed to bed hard frame with new GI Nut, bolts.

Taking out existing broken head board form bed hard and fixing new head board with 18 mm thick exterior grade pre laminated particle board one side laminated in light walnut shade or shade as approved by BSO/GE with 4mm thick teak wood beading in matching shade with new screws.

Taking out existing broken foot board form bed hard and fixing new foot board with 18 mm thick exterior grade pre laminated particle board one side laminated in light walnut shade or shade as approved by BSO/GE with 4mm thick teak wood beading in matching shade with new screws.

Hard rubber shoes as per drg.

Painting of Bed hard as per Note.

Chair writing officer's:- FD/E6/MAP/12:- S&F new seat made of 12mm thick BWR grade plywood over which 50 mm thick 32 density foam cushion shall be fixed with pvc lipping all round.The foam and plywood shall also be covered with best qualityfabric as approved by BSO/GE irrespective of what is shown on drg.

S&F new back made of 12mm thick BWR grade plywood over which 50 mm thick 32 density foam cushion shall be fixed with pvc lipping all round.The foam and plywood shall also be covered with best quality fabric as approved by BSO/GE irrespective of what is shown on drg.

Replacement of new arms with polyurethane reinforced with MS insert arms as shown on drgs /existing in chair.

Rubber stoper as per drawing

Painting of Chair writing as per Note.

Chair revolving cushioned with arm all type:- Replacement of pedestal assembly of chairs revolving same as shown on drgs /existing in chair.

Replacement of hydraulic hieght adjustment base assembly of chairs revolving same as shown on drgs /existing in chair.

Replacement of new arms with polyurethane reinforced with MS insert arms as shown on drgs /existing in chair.

Removing the old torn/damaged tapestry cloth/rexine from the seat of the chair and providing the same with tapestry/rexine over a layer of foam(75mm thick,40 density) as shown on drgs /existing in chair. Colour 7 shade of cloth/Rexine as approved by BSO/GE.

Removing the old torn/damaged tapestry cloth/rexine from the back of the chair and providing the same with tapestry/rexine over a layer of foam(75mm thick,40 density) as shown on drgs /existing in chair. Colour & shade of cloth/Rexine as approved by BSO/GE.

Chair verandah:- FD-256: Spot arc welding to broken parts/joints of chairs.

Removing the existing unserviceable cane plastic from the chair and Recanning the chair with plastic cane 4 to 5 mm wide, white colour and Cream colour, (MAT Pattern),quality as approved by GE/Engr-in-Charge.

Removing the existing unserviceable cane plastic from the chair. S&F PVC seat and back 4mm thick to the chair after providing one extra support in between seat and back of chair.The support shall be of 19mm dia MS tube duly welded horizontally seat and back as directed by BSO. The PVC seat shall be got approved from BSO/GE before supply.

S&F best quality new PVC shoes to the legs of chair.

Painting of chair Verandah as per Note.

Taking out existing broken plywood from the Charpoy GI pipe by loosening the nut bolts with washers. S&F of new 12 mm thick BWR grade plywood of size 1980x900x12mm fixed to Charpoy GI Pipe frame with new Nut, bolts and washer.

Taking out old broken end long rail from three way elbow by unscrewing and replacing with new long rails of GI pipe 32mm bore Med grade duly threaded both end to the required size fitted to the frame complete all as specified and directed by Engineer -in- charge.

Taking out old broken end short rail from three way elbow by unscrewing and replacing with short rail of GI pipe made out of long rail retrieved wide Item serial No-8.02 here-in-before duly thread both ends to require size fitted to the frame complete all as specified and directed by Engineer -in- charge.

Taking out old broken end short rail from three way elbow by unscrewing and replacing with new short rails of GI pipe 32mm bore Med grade duly threaded both end to the required size fitted to the frame complete all as specified and directed by Engineer -in- charge.

Taking out old broken end leg from three way elbow by unscrewing and replacing with legs of GI pipe made out of short trail retrieved vide Item serial No-8.02, 8.03, 8.04 here-in-before; duly threaded at one end to required size fitted to the frame complete all as specified and directed by Engineer -in- charge.

Taking out old unserviceable/broken three way elbow from GI pipe by unscrewing and replacing with new three way elbow GI 32 mm bore/dia ISI marked and complete all as specified and directed by Engineer -in- charge.

Taking out old unserviceable/broken GI check nut from the frame by unscrewing and replacing with new check nut GI 32 mm bore/dia as per sample kept in GE office and complete all as specified and directed by Engineer -in- charge.

S&F of 2 nos of MS flat iron of size (50x5 mm) on long rail parallel to short rail.

Charpoy with hard top : FD/MAP-II/01 Taking out existing broken plywood from the charpoy by loosening the nut bolts with washers. S&F of new 12 mm thick BWR grade plywood fixed to charpoy frame with new GI Nut, bolts.

Repair of steel parts of charpoy, Including remove dents,welding,Making surface smooth with grinding,Damage parts shall be replaced.

Hard rubber shoes as per drg.

Painting of Charpoy as per Note.

Locker steel:- FD-1029 S& F new 3mm thick Stainless steel hasp & staples including removal of UNSV hasp & staples.

Repairs to dented door by removing the door from hinges, making smooth and straight by denting applying putty and refixing by replacing unserviceable hinges.

Repair and Replacemet of Leg as per drg.

Painting of Locker Steel as per Note.

Shoe rack :- FD/E6/MAP/02(R) Repairs to existing frame of shoe rack with welding, Grinding and smoothening of surface by applying putty.

Supply and fixing of jalli made with 3 mm dia MS rod at Equidistant with all around 20 mm dia MS pipe welding to legs as per drawing.

Hard rubber shoes as per drg.

Painting of shoe rack as per Note.

Teapoy Verandah :- FD-255 Top as per above Note & drg.

Short rail as per drg

Long rail as per drg

Leg as per drg.

Painting of Teapoy Verandah as per Note.

Rubber Shoe as per deawing

Chair school with hand board :- FD/E6/MAP/05 S&F of PVC seat and back

S & F of mesh as per drg.

hand board

PVC rubber shoe

Painting of Chair school as per Note.

Table bed side steel :FD/E6/MAP/15( R):- supply & fixing of new top of 18 mm thick exterior grade prelaminated particle board of existing shade/both side laminated with light Wallnut shade or as approved by BSO/GE covered with 4 mm teak wood beading in matching shade, Supply & fixing new handle for cupboard. All steel surface shall be painted with two coats of synthetic enamel paint of existing shade after preparition of surface.

Replace old UNSV/rusted telescopic channel for smooth functioning.

Hard rubber shoes as per drg.

Painting of Table bed side steel as per Note:-

Teapoy Varandah : FD/E6/MAP/17:- Top as per drg.

Rubber Shoes as per drg.

S & F of mesh as per drg.

Painting of Teapoy Verandah as per Note.

Table Dining ORs :FD-165 (M):- Top as per drg.

Legs 25 mm 16 gauge square MS pipe.

Stiffner of 25 mm 16 gauge square MS pipe.

Rubber shoes as per drg.

Painting of Table dining as per Note.

REMCO (BID ID -3220842)

SANKAR TRADERS (BID ID -3220814)

P N GUPTA AND SONS (BID ID -3220212)

ROY CONSTRUCTION (BID ID -3217036)

CONSTRUCTION AND MAINTENANCE ENGINEERING CORPORATION (BID ID -3218842)

SOVA ENTERPRISE (BID ID -3220375)

RADHA ENTERPRISE (BID ID -3218493)