Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.9 LAccepted-AOC | ₹14.9 L | L1 | Accepted-AOC L1 Bidder |
| 2 | L2₹15.1 L+₹17,973.90 (1.21%)Rejected-Finance | ₹15.1 L+₹17,973.90 (1.21%) | L2 | Rejected-Finance L2 Bidder |
| 3 | L3₹15.1 L+₹21,718.46 (1.46%)Rejected-Finance | ₹15.1 L+₹21,718.46 (1.46%) | L3 | Rejected-Finance L3 Bidder |
Tender Value
₹15.0 L
EMD Value
₹29,957
Closing Date
16 Mar 2026, 12:00 pmClosed
Executive Engineer-I, Lower Damodar Irrigation Div
Office of the Executive Engineer-I, Lower Damodar Irrigation Division, P.O. and P.S. - Singur, Hooghly-712409
Construction of wooden Bridge for a length of 35 meter over Kata Khal at Balaichalk, under G.P.- Arandi-I, Block and P.S -Arambagh,District-Hooghly under Arambagh Irrigation Sub Division of Lower Damodar irrigation division.
2026_IWD_1015700_6
WBIW/EE-I/LDID/e-NIT-24/25-26
Open Tender
CIVIL WORKS
Percentage
60 days
Balaichak, Arambagh
Please refer Tender documents.
7 documents required · 7 mandatory
₹29,957
Yes
17 Aug 2026
2 Mar 2026
16 Mar 2026
2 Mar 2026
16 Mar 2026
2 Mar 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supplying Jhaw / Eucalyptus bullah piles at work site, including dressing and making one end pointed.
(iii) 20 cm av. Diameter
Note: Diameter of pile to be measured at a distance of 1.5m from the thicker end. | 444 | Metre | 363.5 | ₹1,61,394 |
| 2 | Supplying Jhaw / Eucalyptus bullah piles at work site, including dressing and making one end pointed.
(iii) 17.50 cm av. Diameter
Note: Diameter of pile to be measured at a distance of 1.5m from the thicker end. | 81 | Metre | 318.21 | ₹25,775.01 |
| 3 | Labour for driving Jhaw / Eucalyptus bullah piles by monkey in all sorts of soil including hoisting and placing piles in position, protecting the pile head with iron ring and cutting and shaping heads before and after driving and including hire and labour for necessary driving appliances and all tackles.
(iii)20 cm av. diameter | 224 | Metre | 141.82 | ₹31,767.68 |
| 4 | Labour for driving Jhaw / Eucalyptus bullah piles by monkey in all sorts of soil including hoisting and placing piles in position, protecting the pile head with iron ring and cutting and shaping heads before and after driving and including hire and labour for necessary driving appliances and all tackles.
(iii) 17.5 cm av. diameter | 54 | Metre | 133.48 | ₹7,207.92 |
| 5 | Best Seasoned wood work in shutters, posts, plates, rafters, battens, trusses, beams, purlins, bargas, wheel-guards, running boards, frames etc. including supplying at site, handling, hoisting, fitting & fixing in position excluding the cost of bolt and nuts only but including the cost of nails and screws with cost and carriage of all materials complete as per the direction of the Engineer-in-charge.
(a) Sal wood | - | Cum. | 1,11,013.79 | - |
| 6 | Labour charges for old or new wood work including hoisting, fitting & fixing including supplying new nails and screws wherever necessary etc. complete as per the direction of the Engineer-in-charge. | - | Cum. | 7,658.51 | - |
| 7 | Supplying, fitting and fixing with iron nails half split bullah wailing pieces and cross pieces etc. complete with cost of all materials and carriage to site.
(a) Width of thinner end above 10 cm. and less than 15 cm. (i) Jhaw / Eucalyptus. | - | Metre | 228.83 | - |
| 8 | Coal tarring with 5% pitch including cost of material and labour complete as per direction of the Engineer-in-charge
b) Two Coat | - | Sqm. | 65.55 | - |
| 9 | Splicing (as per drawing and direction of the Engineer-in-charge) in position 150 mm. to 250 mm. dia. of individual bullah with 2 Nos. 1250 mm. x 75 mm. x 10 mm. M.S. flat and 4 Nos. half rings made of (700 x 75 x 6) mm. M.S. flat fitted and fixed with 4 Nos. 12 mm. dia. bolts with nuts and washers. Flat bars are to be fitted and fixed with 3 Nos. 20 mm. dia. through bolts with nuts and washers including cost of supply and carriage of all materials, making necessary scaffolding, stagging etc. drilling holes complete (splicing is to be done on position after the bottom bullah is driven as per necessity). Length of lap of bullah should be provided as five times the diameter of bullah or 90 cm. whichever is greater. | 27 | Each | 3,260.76 | ₹88,040.52 |
| 10 | Supplying transporting & fabrication of welded steel girder as per approved drawing duly made up built up sections of MS Plate, Angle, Channel of different thickness including metalizing priming coat followed by finish coat of paints of total thickness of 165µm. The rate shall be inclusive of supply of all the steels, labour consumables & machinery and all other materials & accessories required for fabrication to complete in all respect with all lead, lift etc. The rate is also includes( i) Cost of to and fro transportation between contractor's work shop & work site including all lead, lift, loading, unloading etc. (ii) Cost of inspection, testing of girders in stages by nominated inspection agency. Nomination of inspection agency for passing of fabricated members and trial assembly will be decided by Engineer-in-Charge. iii) Cost of supplying & fixing of HSFGI High strength bolts (not less than 8.8 grade). (iv) Cost of blast-cleaning the steel surface including supplying & applying of zinc phosphate primer followed by finish coat of micaceous iron oxide pigmented drying oil type paint of total thickness of 165µm. | 1 | Tonne | 1,12,951.27 | ₹1,12,838.32 |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.15 MB
WB_Form_2911.pdf
Tender Documents • 1.86 MB
Additional.rar
Additional Documents • 1.83 MB
BOQ_2497062.xls
BOQ • 0.38 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .