Provn of defi geysers, connected works and deficient power points in JCOs/OR MD Accn at 39 GTC and service connection to facta, ITA GD post and charging points for E Vehs at MT, Offrs Mess and KSS in Varanasi Cantt.

Amount

S&F electric water heater, storage type Plastic/PVC body with SS inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and as directed.

S&F sheet metal enclosure 240V SPN with two pin and earth plug socket and top including 20A MCB SP complete all as specified and as directed.

M&L for sub main wiring with PVC insulated 1100V grade FRLS single core multi stranded copper conductor cable of size 2x4 sqmm + 1x4 sqmm as earth continuity cable passing through and including 25/20mm dia PVC conceal conduit including chases cutting and making good disturbed surface,applying finishes to match existing surface all as specified and directed by Engr-in-Charge. Note - Two runs of 4sqmm including one run of 4 sqmm including PVC conduit shall be measured as unit length.

M&L for point wiring One 3 pin socket outlet. 15 amps, independent, with cables 2.5 sq.mm size complete with PVC insulated unsheathed, 1100 volts grade cable FRLS type multi stranded copper conductor, single core drawn in and including not less than 20 mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories for concealed wiring for one light/fan/bell/buzzer / exhaust fan point controlled by one, one way switch, including concealed pressed steel/PVC terminal box of required size not less than 1.6 mm thick factory made duly painted inside & outside with two coats of black bituminous paint over & including a coat of red oxide primer, with 3 mm thick top cover of plastic laminated sheet of required colour for mounting switch, sockets, fan regulator etc including 2.5 Sqmm FR type PVC insulated unsheathed cable solid copper conductor as continuous earth wire and connected to earth dolly as required at site & including chases cutting & making good disturbed surface & applying finishes to match existing surface complete all as specified and directed.

M&L for sub main wiring with two single core PVC insulated & unsheathed cable 6.0 Sqmm (nominal area) FRLS type having multi-stranded copper conductor drawn in and including not less than 20 mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories for concealed wiring with and including 6.0 Sqmm FRLS type PVC insulated unsheathed cable solid copper conductor as earth wire connected to common earth as per IS & cutting chasing for conduit & sinking for boxes & making good to walls disturbed surface & applying finishes to match existing surface complete including taking down of exsting sub main wiring complete all as specified and directed. NOTE : Two runs of 6 Sqmm and one run of 6.0 Sqmm cable and PVC conduit shall be measured as a one unit length.

S & F for 5 pin, 15 Amp/ 16 Amp , socket outlet, flush type, 2 in 1 complete all as specified and directed.

S & F for switch piano, flush type, 15/16 amps, single pole , one way , 230 volt complete all as specified and directed.

Supply, laying and testing cable with cable gland, XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of sizes 10 sq mm 2 core complete all as specified and as directed.

Supply, laying and testing cable with cable gland, XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of sizes 6 sq mm 4 core complete all as specified and as directed.

Supply, laying and testing cable with cable gland, XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of sizes 16 sq mm 4 core complete all as specified and as directed.

M&L for bus bar box of sheet metal 3 mm thick powder coated, having 4 Nos. aluminium bus bar of rating 200 Amp mounted on insulator including 01 No. of MCCB 4 pole 63 Amp 415 volts with thermal magnetic release as incomer, breaking capacity 25 KA inside the box and suitable fixing arrengement like flat iron clamp of size 25x3mm with hinged cover & locking arrangement including grouting of feeder piller box 60 cm above ground level by providing 90 cm long angle iron of size 40 X 40 X 6 mm welded on all the four corner embedded in PCC 1:2:4 using 20 mm graded stone aggregate complete duly painted with two coat of synthetic enameled paint over a coat of red oxide primer fixed in repair outdoor type duly fitted on complete all as directed by Engineer-in-charge

S & F sheet metal enclosure electric vehicle safety Box/EV Charging Terminal /outdoor cabinet with lock & Key ,Waterproof dustproof dynamic for all electric vehicles , wall mounted including 16 Amp Plug and 25 Amp MCB all as Directed and Specified by Engr-In -Charge.

S & F sheet metal enclosure for MCB DB of 4 way SPN with 200 amps rated bus bar double door complete all as specified and as directed.

Supply and fixing 32 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of 5-32 Amp current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.

Supply and fixing 32 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 40 Amp current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.

Supply, fixing and testing of LT distribution Panel outdoor type made out of 2mm thick MS sheet of size not less than 1000x1000x150mm duly painted powder coating with two coats of synthetic enamel paint over a coat of red oxide primer, grouted in PCC provision of tapping for incoming and outgoing electric connections with suitable size of lugs,glandslocking arrangement including grouting of feeder piller box 60 cm above ground level by providing 90 cm long angle iron of size 40 X 40 X 6 mm welded on all the four corner embedded in PCC 1:2:4 using 20 mm graded stone aggregate complete duly painted with two coat of synthetic enameled paint over a coat of red oxide primer fixed in repair outdoor type duly fitted on complete all as directed by Engineer-in-charge. complete all as specified and directed comprising of the following:-

Supply and errection of steel tubular pole swaged type 410-SP 31(9.0m long pole) as per IS:2713 (part I to III) 1980 complete with cast iron base plate, pole cap, mild steel bolt, nuts and screws complete including dismantling of exsiting pole all as specified including consisting of following works:- (a) Excavation in trenches not exceeding 1.5 mtr wide & 1.57 mtr deep for pole foundation & getting out in soft/loose soil, returning filling in the excavated of soil after fixing the pole in foundation ramming earth around in layer not exceeding 25 cm thick and disposal of surplus soil to a distance not exceeding 50 mtrs complete all as specified and directed. (b) M&L for PCC 1:4:8, type D2 (using 40mm graded crushed stone aggregate) in foundation 900mmx600mm cross section and planting depth 1.5 mtr for concrete encasing the pole upto GL complete all as specified and directed.

Contd/... (c) M&L for providing PCC 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) for plinth block/collar above GL 500mm high and 450mm dia complete all as specified and directed. (d) M&L for painting of pole externally with one coat of black bituminous paint (upto planting depth) and above plinth block concrete collar with two coat of aluminium paint over a coat of red oxide primer including preparation of surface including painting of 30 cm wide bands 3 Nos with synthetic enamel paint of appropriate colour in alternate layer upto the height of 1.5mm above plinth block. (e) M&L for writing letter or figures (Block Roman, Italic as Indian) with thick synthetic enamel paint of apprised shade not exceeding 5 cm height including numbering of pole complete all as specified and directed. NOTE : Manufacture's test certificate will be produced before execution work.

Supply and fix LED street light luminaires 60 watt with pressure die cast aluminium housing with heat resistant toughned glass and IP66 protection complete including 1.2 mtr long bend to shape GI pipe of desired size for fixing of security light & service connection cable complete all as specified and directed.

Supply and fix for hot press moulded PVC junction box of size 230mm x 170 mm x105 mm with 200A TPN Aluminium bus bars mounted/fixed on porcelien insulator shock and rust proof,cable entry from bottom and other sides,100% weatherproof, with pole mounting arrengement temperproof,fire retardant class FV-0 as per IS 11731 part -II or V-O as per UL-94 including flat iron clamp of size 25 x 3 mm with nut and bolt complete all as specified and directed.

Excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes,laying of cables etc. not exceeding 10 sq m on plan and not exceeding 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

Removal of surplus excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

S&F 40 mm dia GI pipe 'light grade' ISI marked including fittings such as bends, tees, sockets etc fixed on wall/pole or laid in trenches under road crossing/hardstanding including taking down existing pipe complete all as specified and directed.

M&L for sand cushioning with dry local sand for cable protecting under ground cable (8 cm before laying the cable and 15 cm after laying the cable) in trenches including punning the sand upto 18 cm thick and consolidated complete all as specified and directed. NOTE : Punned thickness only shall be measured.

Supply and laying dry well burnt locally available brick sub class 'B' modular bricks laid flat with width equal to the length of whole bricks over cable as cable protection complete all as specified and directed.

Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm each complete all as specified and directed.

M&L for drilling through bore hole by trenchless technology without disturbing the existing road or hard surface complete all as specified and as directed.

M&L for laying in fixing on wall GI Pipe 15mm dia medium grade including all fittings and fixtures complete all as specified and as directed.

S & F PVC connections 15mm size with PTMT nuts of length 450 mm complete all as specified and as directed.

S & F PVC connections 15mm size with PTMT nuts of length 300 mm complete all as specified and as directed.

S&F fancy type chromium plated Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe of size 15mm dia complete all as specified and as directed.

S & F 15 Mmm dia fancy type chromium plated with long shank and angle valve cast copper alloy screwed down type high pressure with cruth or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed.

M/S DEEKSHA CONSTRUCTION

M/S UJJAWAL ENTERPRISES

SINGH BUILDERS