Establishment of 400/230-110 kV AIS SS at Edayarpalayam in Coimbatore Operation Circle of Coimbatore Region on total turnkey basis

Amount

Schedule I

Schedule II

Schedule III

Applicable GST Amount (Total GST Amount) shall be quoted in M16 (@18%)

Description of Work / Item(s)

Amount

Design, Engineering of control room building foundation, including soil investigation, preparation of contour layout, design calculation for analysis of entire control room building and foundation, drawing etc. complete.

Clearing the light jungle and disposing away including all lead,lift,etc.,complete as directed by the Engineer incharge at site

Cleaning the juliflora jungle with uprooting and disposing away including all lead,lift,etc.,complete,as directed by the Engineer incharge at site

Supplying and Filling in low lying area with gravel including cost of gravel levelling with JCB / other machineris , consolidation as per specification & with power roller including all labour lead and lift etc complete.

Earth work excavation in hard stiff clay, stiff black cotton hard red earth,shales, muram, gravel, stoney earth and earth mixed with small size boulders for foundation in all soils with an initial lead, lift, etc., complete.

Earthwork excavation in MR and DMR not requiring blasting. for foundation with an initial lead of 10m and lift of 2m etc complete.

Earthwork excavation for foundation in medium rock and dense medium rock requiring blasting for foundation including all lead and lift etc complete.

Earthwork excavation for foundation in hard rock by blasting for foundation ,all labour lead and lift etc. complete.

Earth work excavating and depositing on Bank with initial lead of 10m and initial lift of 2m in Control blasting for foundation as per standard specification, etc., complete..

Earthwork excavation for foundation in hard rock with wedging and Chiseling for foundation including all lead and lift etc. complete.

Earth work excavation by cutting and filling the yard with a lead of 1KM in hard stiff clay, stiff black cotton hard red earth,shales, muram, gravel, stoney earth and earth mixed with small size boulders for levelling the yard in all soils with an initial lead, lift, etc., complete.

Earthwork excavation by cutting and filling the yard with a lead of 1 Km in MR and DMR requiring blasting. for levelling the yard with all leads and lifts etc complete.

Earthwork excavation by cutting and filling the yard with a lead of 1KM for levelling the yard in hard rock by drilling with jack hammer using compressor ,all labour lead and lift etc. complete

Earth work excavating by cutting and filling the yard with a lead of 1Km for the yard levelling in Control blasting for foundation as per standard specification, etc., complete..

Drilling holes of 32mm dia in to rock to a depth of 0.60 m and inserting 25mm dia rod in to hole as Grip Rod including grouting the holes with cement including all leads & lifts etc complete.

Supplying and Filling the foundation and basement with quarry dust including ramming, cost of all materials, lead and lift etc. complete.

Providing anti termite treatment in 4 stages I) immediate after earth work excavation and before laying foundation concrete II) after refilling for sides of foundation III) Before laying of flooring concrete IV) outside of basement upto 1.0m alround the building using termite chemical 250ml for 10lit of water etc. complete.

Supplying and filling M. sand for foundation and basement including watering and consolidation in15 cm layers including cost of M.sand all labour lead lift etc. complete

Plain cement concrete M10 using 12 to 20mm HBG metal for foundation without formwork including cost of cement, all materials, labour, lead, lift, etc. complete.

Plain cement concrete M10, using 40mm HBG metal for foundation without formwork including cost of cement, all materials, labour, lead, lift, etc. complete.

Random rubble masonry in CM 1:5 mix for kerb walls or retaining walls structure foundations wherever necessary including cost of all materials labour,lead and lift etc., complete.

RCC M20 mix using 12 to 20mm down graded hard machine broken granite stone, including cost of all materials,form work, centering, curing ,all labour charges lead,lift etc., complete but excluding cost of steel reinforcement. For Raft concrete.

RCC M20.using 12 to 20mm down graded hard machine broken granite stone, including cost of all materials,form work, centering, curing ,all labour charges lead,lift etc., complete but excluding cost of steel reinforcement.For pedestal concrete.

RCC M 20 mix .for column concrete using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. but excluding cost of steel reinforcement.Upto ground floor roof

RCC M 20 mix .for column concrete using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete.but excluding cost of steel reinforcement.Upto First floor roof

RCC M 20 mix .for column concrete using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete but excluding cost of steel reinforcement.Upto Second floor roof

RCC M 20 mix for Grade beam and Plinth beam using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement.

RCC M 20 mix using 12-20mm graded hard machine broken granite stone,for Continuous lintel concrete including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Ground floor

RCC M 20 mix using 12-20mm graded hard machine broken granite stone,for Continuous lintel concrete including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For First floor

RCC M 20 mix using 12-20mm graded hard machine broken granite stone,for Continuous lintel concrete including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Second floor

RCC M 20 mix using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. but excluding cost of steel reinforcement. For Sunshade concrete 60cm projected, 80mm Tk. at wall and 50mm Tk. at free end.Ground floor

RCC M 20 mix using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. but excluding cost of steel reinforcement. For Sunshade concrete 60cm projected, 80mm Tk. at wall and 50mm Tk. at free end. For First floor

RCC M 20 mix using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. but excluding cost of steel reinforcement. For Sunshade concrete 60cm projected, 80mm Tk. at wall and 50mm Tk. at free end. For second floor

RCC M 20 mix using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Ground floor Roof Beam concrete.

RCC M 20 mix using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For First floor Roof Beam concrete.

RCC M 20 mix using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Second floor Roof Beam concrete.

RCC M 20 mix using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Ground floor Roof slab concrete 130 mm thick

RCC M 20 mix using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For First floor Roof slab concrete 130mm Thick.

RCC M 20 mix using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Second floor Roof slab concrete 130mm Thick

RCC M 20 mix using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Roof slab concrete 150mm Thick

RCC M 20 mix using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For RCC wall concrete.

RCC M 20 mix using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete, but excluding cost of steel reinforcement. For precast cover slab concrete.

Providing steel reinforcement using steel grade Fe500 for RCC works including cost of steel rod, binding wire and labour for cutting, bending, tying and placing in position of the steel reinforcement all materials, lead, lift etc., complete.

Brick work in CM 1:5 using II class chamber burnt bricks for basement & superstructure including cost of all materials, all labour lead lift etc ., complete. For Ground Floor

Brick work in CM 1:5 using II class chamber burnt bricks for basement & superstructure including cost of all materials, all labour lead lift etc ., complete. For First Floor.

Brick work in CM 1:5 using II class chamber burnt bricks for basement & superstructure including cost of all materials, all labour lead lift etc ., complete. For Second Floor.

Brick work in CM 1:3 using II class chamber burnt bricks for partition wall, including cost of all materials, all labour charges, lead, lift, etc. complete.

Plastering with cm 1:5, 12mm thick for interior and exterior faces of walls in all floors including cost of cement, all materials,curing, labour, lead and lift etc., complete.

Plastering with cm 1:3, 12mm thick for exposed faces of ceiling, beams, sunshade,plinth etc. including cost of cement, all materials,curing, labour, lead and lift etc., complete.

Weathering course with PCC 1:2:4 mix using 6-10mm chips over R.C.C roof slab for a average depth of 50 mm for giving required slope and thickness well beaten with wooden beaters and laying one course of sun reflected Cool Roof tiles of 25x25x1.5 cm using CM 1:3 mixed with crude oil 10 percent by weight of cement including cost of cement,all materials,labour,curing,all leads,and lifts etc complete as per standard specification

Damp proof course using cement mortar 1:3, 20mm thick with water proofing compound including cost of all materials lead lift etc., complete.

Refilling with excavated earth (all types of soil ) and consolidation as per standards & specification etc., complete.

Transport of excavated earth to low lying area within sub station premises with an lead of 200 m including cost of labour,lead,lift etc complete

Painting two coats with approved quality White emulsion paint over priming coat, for interior ceiling and surfaces including cleaning the plastered surface, cost of all materials, labour, lead, lift, T&P, etc. complete.

Painting two coats of newly plastered insidewall surface with bset quality of ready mixed plastic emulsion paint of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required , cost of all materials, labour, lead, lift, T&P, etc complete

Painting the outside walls with two coats of bset quality of exterior emulsion of approved colour over a primer coat including cost of all matreials, labour,lead and lift etc., complete.

Painting with 2 coats of approved colour cement paint over priming coat including cost ncluding cost of all materials, labour, lead, lift etc complete for exterior faces of walls.

Painting with 2 coats acid proof paint of approved colour over a priming coat of white cement for battery room including cost of all materials, labour, lead, lift etc complete for interior walls.

Flooring with approved acid proof non slippery tiles over cement mortor 1:3, 20mm thick in floor and wall including pointing with white cement finishing the joints flush pointing the surface including cost of all materials, labour, lead , lift etc complete.

Flooring with approved virtified of non slippery type tiles over cement mortor 1:3, 20mm thick including pointing with white cement finishing the joints flush pointing the surface including cost of all materials, labour, lead , lift etc complete.( sample to be approved by Dept.Engineer)

Dadooding walls with approved quality of glazed tiles, size and design laid in cement mortar 1:2 ,10mm thick including pointing with same coloured cement , finishing the joints and pointing flush with the surface , including cost of all materials, labour, lead, lift, etc. complete.

Flooring for staircase with granite slabs super fine polished with machine cut edges 18 mm to 20 mm thick, including required edge nosing to suitable for steps , including cost of all materials, lead, lift,labour, etc., complete. ( sample to be approved by Dept.Engineer)

Supply and fixing in position of double leaf anodised aluminium fully glazed main door using door outer frame 101.60 x 44.45 x 2.10mm @ 1.608Kg/M and door inner frame side and vertical 53.70 x 44.45 x 2.30mm @ 1.238 Kg/M, door bottom section 83.50 x 44.45 x2.40mm@ 1.679Kg/m and diveder and top of door frame 47.62 x 44.45x 2.17 mm@ 1.072 Kg /M glazing clips of 17.30 x 19.0 x 0.60mm @ 0.083 Kg/M with std.quality hydraulic floor spring, automatic door closure, rubber beedings, hinges, handle, etc., with 5.50mm thick sun cool glass, etc., complete. Double leaf main door

Supply and fixing in position of anodised aluminium partially glazed single leaf door using outer frame 101.60 x 44.45 x 2.10mm @ 1.608Kg/M and door inner frame side and vertical 53.70 x 44.45 x 2.30mm @ 1.238 Kg/M, door bottom section 83.50 x 44.45 x2.40mm@ 1.679Kg/m and diveder and top of door frame 47.62 x 44.45x 2.17 mm@ 1.072 Kg /M glazing clips of 17.30 x 19.0 x 0.60mm @ 0.083 Kg/M, rubber beedings, hinges, handle, hydraulic floor spring, automatic door closer etc, and with 12mm tk. one side laminated board at bottom half portion and top half portion with 5.50mm thick sun cool glass including cost of all materials, lead, lift, etc, complete Single leaf door

Supplying and fixing in position of aluminium partition partly glazed & partly paneled above 12mm thick both side prelaminated boards [ MDF exterior grade] and 5mm thick machine frosted float glass 9modi, saint gobine or Equivalent using aluminium box section of not less than 63x38.4x2mm x 1.174kg/m for vertical @ 955mm c/c approx and horizantals[4Nos] including cost of all materials, labour, lead, liftT&P etc. complete as directed by deparment Engineer at site.

Providing of 35mm thick factory made pre-laminated ABS(Acrolynitrile Butadiene Styrene) Door Shutter moulded indifferent designs, consisting of all round frame made out of water proof solid foam PVC bar of size 20 x 32mm, reinforced by 32 x 32mm - 2 Nos., for vertical made out of LVL Laminated Veneer Lumber), core material of 32mm thick high density craft paper honey comb board, sandwiched on both sides with pre-laminated ABS sheet thickness of 1.5mm.PVC edge banding of size 0.45mm on the vertical sides.Hardware made out of steel coated butterfly hinges - 3 Nos.,for each shutter and ISI make SS round lock complete for finished item of work, complete complying with the standard specification.The door shutter and frame should be got approved from the Executive Engineer before use on work.

Granolithic cement concrete M15 mix for floor finish 20 mm thick using stone chippings of 10 mm size and below,including cost of all materials, labour, lead, lift etc complete over 100 mm thick concrete of PCC 1:3: 6

Supply and fixing of solid PVC door with frame made out of rigid thermo vinyl polymer extruded section of size 62mmx51mm with 2mm wall thickness,shall be reinforced with special polymeric rods of size 255mmx30mmx25mm and with EPDM gaskets along the frame. The door shutter frame of 40mm thickmade out of one piece moulded rigid thermo vinyl polymer extruded section of size 25mmx40mm with 2mm wall thickness is mitered and joined at corners by stainless steel/ aluminium screws. The infill of the door shutter consists of a seamless one piece multichamber hollow rigid thermo vinyl polymer section of size 762mmx35mm with 1mm wall thickness and with prelaminated glossy finish on either side of door shutter of suitable size including cost of all materials,labour, lead, lift etc., complete. .

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned.Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work

Fabrication, supplying and fixing of MS framed single leaf door with GI sheet 18 gauge using MS angle 40x40x6mm for door frame and MS angle 35x35x5mm for shutter frame with necessary stiffeners using MS flats of size 19x5mm including painting with two coats of enamal paint over one coat of red oxide paint including cost of all materilas, labour, lead, lift etc, complete.

Fabrication, supplying and fixing of MS angle framed window half glazed and half shutter using MS angle of size 35x35x5 mm for window frame and 25x25x5mm for shutter and MS flats 20x5 mm thick and 12mm rods for window grill with locking arrangement including painting with two coats of enamal paint over one coat of red oxide paint including cost of all materilas, labour, lead, lift etc, complete.

Supplying and fixing MS grills for windows ,ventilators ,gates MS angle .Flat and square rods as directed by the Engineer at site including painting two coats with enamel paint over a coat of primer cost of materials, labour, lead and lift etc., complete.

Supplying and fixing of Europian type water closet with flushing cistern of Neycer/Parry ware with P"" or "S" trap ,seat cover 15 mm dia connectin hose .2 nos 15 mm dia CP angle valve ,hand shower -1 No. including cost of all materials ,lead lift etc complete as directed by department Engineer at site

Supplying and fixing in position IWC ORISSA PAN of size 580X420mm white glazed earthen ware of approved make & quality with 'P' or 'S' trap conforming to IS - 2556 Part XII [Parryware or Equivalent] with sand cushion and forming flooring around the cloast using 40mm broken brick jelly in lime concrete 1:2:5 [1/lime, 2/sand & 5/brick jelly] 100mm thick and finishing the top to required slope and giving connection to sewer line including the cost of all materials, labour, lead, lift, T&P, etc. complete.

Supplying and fixing in position White glazed Flat back urinal - Size 455 x 350mm of approved make and quality [Parryware -Aquaseal urinal or equivalent] and with PVC pipe connection [Kohinoor], 32mm PVC waste pipe [Kohinoor], 12/15mm GM wheel valve ISI, fixing the urinal to the valve with necessary TW plugs, brass screws etc, connecting to the water main as directed at site including the cost of all materials abour, lead, lift, T&P etc. complete.

Supply and fixing of wash basin of size 560x410mm white and of approved quality and make[Parryware or equivalent] with 12/15mm dia brass CP pillar tap [waterman], 32mm PVC waste pipe [Kohinoor], 12/15mm CP angle cock [ISI], 15mm brass nipple, 15mm nylon connection [Kohinoor] etc. fixing the basin in the wall with GI/Alu. brackets and rag bolt and nut, giving necessary water connection etc., and mirror with beveled edge fixed with suitable CP brass screws etc., complete.

Supplying and fixing at 110mm dia, best quality ventilating shaft 3.65m height with PVC cowl at top and fixing in poistion inlcuding cost of all materials, curing labour, leads and lits etc., complete.

Supplying and fixing in position 110 mm dia PVC soil pipe- 6kg/sq.cm [Finolex or equivalent] with special clamps & PVC shoe at bottom including the cost of all materials, labour, lead, lift, T&P, etc., complete

Supplying and filling with 40mm HBG metal in dispersion trench, rain water harvesting pit including cost of metal, all labour, lead,lift, consolidation etc. complete.

Supply and fixing 110mm PVC down fall pipe 6kg/cm2 avonplast or Finolex make with required bend, tee,coupling, grating shoe and GI wall clamp at 90cm intervals including cost of materials, and making holes in masonry or concrete and restoring affected surface to original condition , labour, lead and lift etc., complete.

Providing and laying PVC high density 10 ksc 50 mm dia pipe including cost of all materials, labour,lead and lift etc., complete.

Providing and laying PVC high density 10 ksc 40 mm dia pipe including cost of all materials, labour,lead and lift etc., complete.

Providing and laying PVC high density 10 ksc 32 mm dia pipe including cost of all materials, labour,lead and lift etc., complete.

Providing and laying PVC high density 10 ksc 25mm dia pipe including cost of all materials, labour,lead and lift etc., complete.

Providing and laying PVC high density 10 ksc 20mm dia pipe including cost of all materials, labour, lead and lift etc., complete.

Supplying and fixing in position of 50 mm dia gun metal gate valve leader or approved make including cost of materials lead lift labour etc complete.as directed by department Engineer at site

Supplying and fixing in position of 40 mm dia gun metal gate valve leader or approved make including cost of materials lead lift labour etc complete.as directed by department Engineer at site

Supplying and fixing in position of 32 mm dia gun metal gate valve leader or approved make including cost of materials lead lift labour etc complete.as directed by department Engineer at site

Supplying and fixing in position of 20 mm dia gun metal gate valve leader or approved make including cost of materials lead lift labour etc complete.as directed by department Engineer at site

Supplying and fixing in position of 25 mm gun metal wheel valve leader or approved make including cost of materials lead lift labour etc complete.as directed by department Engineer at site

Supplying and fixing in position of 20 mm gun metal wheel valve leader or approved make including cost of materials lead lift labour etc complete.as directed by department Engineer at site

Providing and fixing of long body chromium plated heavy duty metal tap of 12mm size including cost of all materials, labour, etc., complete.

Providing inspection chamber with manhole cover depth varying from 0.75 to 1.5m including cost of brick work,plastering and all materails lead lift etc complete.

Fabrication & erection of Name Board of vinyal sticker laminated in alco panel using 18 gauge M.S. sheet with outer in suitable angle and stiffener at the rear side of MS flat supported on M.S. channel ISMC.

Supplying and fixing in position sun control polyester flim, reflective type 75 microns thick (gareware or equivalent )including the cost of all materials, labour, lead, lift, T&P, etc. Complete.

Providing false ceiling by using 12.50mm thick perforated gypsum board in panels using 6mm GI rod suspender ,16 gauge aluminium "T" and "L" including all materials, labour, lead and lift etc., complete.

Supplying and sticking the name / designation stickers in doors identifying the rooms including cost of material, labour etc. complete.

Providing locking arrangements with 6 lever Godrej lock with 3 keys including cost of all materials, labour, lead and lift etc., complete.

Providing Sintex water tank of capacity of 1000 lits including cost of material, labour, lead, lift, transportation and placing in position over head room etc., as directed by the engineer at site.

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc complete

Providing MS channels and GI chequred plates of 8mm thick inside the control room including cost of all mateiral,labour, lead, lift painting and fixing in position etc., complete

Supplying and fixing black granite stone 0.90 x 0.60 m size Engraved Foundation detail and year of construction fixing in wall at entrance, Digital wall clock 2 Nos, floor coir mat 2000x600 for Entrance, 1000x500 - 2 Nos. for office of approved make and quality including the cost of all materials, leads, lifts etc., complete

Lettering the name of Substation over entrance wing wall in both Tamil and English using cement plastering and providing borders, colouring with emulsion paints etc., including cost of all material, labour, lead, lift etc., complete

Fixing of bore well point by well qualified geologist labour T & P including all lead lift etc complete as directed by the department engineer at site.

Drilling of borewell in various soil /hard rock etc., including transportation of Power drill machineries first by taking a pilot bore of 180 mm dia and then drilling 150 mm dia at the bore well point fixed at site from 0m to 200 m.including all leads ,lifts etc complete

Drilling of borewell in various soil /hard rock etc., including transportation of Power drill machineries and drilling 150 mm dia at the bore well point fixed at site above 200m including all leads ,lifts etc complete

Supplying and providing Heavy duty 180 mm PVC casing pipe with ISI make including cost of all materials, leads ,lifts etc complete.

Supplying & Inserting 40mm dia HDPE hose pipe of make FLOWTEC or equivalent ISI make for suction inside the borewell with supporting clamp including cost of all materials, labour, lead & lift etc., complete as driected by the department engineer at site.

Supplying & Inserting 20mm dia HDPE hose pipe of FLOWTEC or equivalent ISI make for air pipe inside the borwell with supporting clamp including all materials, labour, lead & lift etc., complete as directed by the department engineer at site.

Supplying providing and fixing of 15 mm Dia GI pipe " B " class of approved quality including cost of all materials, leads ,lifts etc complete.

Supplying and fixing of 180 mm dia PVC End cap approved best quality including all leads ,lifts,etc complete.

Supplying and erection of 5HP air compresser 3 phase electrical motor of approved brand with all related accessories as per ISI in all respect including oil level indicator switch board with 3 Nos. test lamp, 3 Nos. fuse carrier, 1 No. 15AMPS DPIC swithch with L&T make starter with guard and providing earthing to main with no. 8 tinned copper rod and 6' long 40mm dia GI pipe for earting and earth pit filled with charcoal and salt as per standard spectification and laying motor bed by concrete and placing motor over bed, labour charge for placing motor over bed including cost of all materilas lead and lift etc, complete as driected by the department engineer at site.

Supplying and erection of 2HP mono block 3 phase electrical motor of approved brand with all related accessories as per ISI in all respect including oil level indicator switch board with 3 Nos. test lamp, 3 Nos. fuse carrier, 1 No. 15AMPS DPIC swithch with L&T make starter with guard and providing earthing to main with no. 8 tinned copper wire rod and 6' long 40mm dia GI pipe for earthing and earth pit filled with charcoal and salt as per standard spectification and laying motor bed by concrete with placing motor over bed, labour charge for placing motor over bed including cost of all materilas lead and lift etc, complete as driected by the department engineer at site.

Wiring with 2 x 1.5 sq.mm (22/0.3) PVC insulated SC unsheathed multistrand Copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with Steel switch box and 5A F.T switch with continuous earthwire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / fan point

Supply and run of 2x 1.5 sq.mm (22/0.3) PVC insulated Multistrand unsheathed copper conductor of 1100 V grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good on the concealed portion withsuitable colour..suitable heavy gauge

Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu.conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall ,with 150x100x113mm Tw switch box with 3 mm thick hylum sheet cover for 5 A 3 Pin non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC Plug point.

Wiring with 2 x 4 sq.mm (56/0.3) PVC insulated multi strand unsheathed copper conductor cable of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, with 150 mm x 100 mm x 113 mm Steel switch box with 3 mm thick hylem sheet for 15 A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion, with suitable colour for concealed power plug point.

Supply and run of 4 of 4 sq.mm (56/0.3) PVC insulated multi strand unsheathed copper conductor of 1100 V Grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour.

Supply and fixing of single LED fitting complete with LED light with conduit pipe suspension from the ceiling with PVC unsheathed copper leads from the terminals to the fitting with LED tube.4' X 20w Single Industrial type fitting

Supply and fixing of single LED fitting complete with LED light with conduit pipe suspension from the ceiling with PVC unsheathed copper leads from the terminals to the fitting with LED tube.4'x20 W Single Box type fitting

Supply and fixing of 4'x20 W Twin type Mirror optic suspension type fitting (Philips /Crompton / Wipro) complete with louvers cover complete with LED light with conduit pipe suspension, with PVC unsheathed copper leads from the terminals to the fittings with LED tubes.

Supply and fixing of W.T bulk head fitting (Philips / Bajaj / K.Lite / Crompton Greaves) suitable for LED lamp with guard and 1No 20 W LED bulb.

Supply and fixing of fancy glass shade and 11 W LED for BH point.

Supply and fixing of 1400 mm (56") AC ceiling fan complete with stepped electronic 300 W regulator with 300 mm down rod on the existing clamp.

Supplying and fixing of 1200mm sweep AC ceiling fan with electronic requlator with 300mm down rod on the existing clamps of approved quality of Crompton/Rally/ usha/bajaj including cost of all materials lead lift etc complete.

Supply and fixing of 375 mm (15") sweep (heavy duty) AC exhaust fan complete with necessary wall opening and making good of the wall.

Supply and fixing of 450 mm sweep (heavy duty) AC exhaust fan complete with necessary wall opening and making good of the wall.

Supplying and fixing of RCCB safe trip of appd LEGRAND , ISI make , 25amps with suitable box including cost of all materials labour, lead, lift, etc., complete as per standard specification.

Supply and fixing of 32 A TPNMC switch on suitable angle iron frame work with MS cable entry box with earth connection only.

Earthing as per PWD standard with an earth electrode of 2 Mtr. Class 'B' GI pipe of dia not less than 32 mm complete with necessary masonry work.

Supply and fixing of 20 Amps DP plug and socket in sheet enclosure with 32 A DP MCB in flush with wall with earth connection (For AC plug) [Legrand (MDS) / Hager (L&T) make].

Supplying and laying of 4 core 16 Sqmm copper PVC armoured LTUG cable including cost of cable, lead, lift, labour charge, etc., complete.

Supply and laying of 2 x 6 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre

Supply and fixing of 3 phase 4 wire 4 way ICDB of 32 Amps per way with 63 A TPN MC switch with suitable trunking box MS cable entry and internal connection in suitable angle iron frame work,with earth connections.

Supplying and fixing of 4 pole 32 Amps Isolator 1 No with MCB box 4 pole including terminal block for testing purpose at relay and CC room, cost of all materials, lead, lift, labour charge, etc., complete.

Supplying and laying 25 mm dia 10 kg PVC pipe of approved quality for AC unit water drain pipe including cost of all materials, lead, lift, labour charge, etc., complete.

Supplying and fixing 5/8" copper tube for connecting AC panel to AC out door unit including cost of all materials, lead, lift, labour charge, etc., complete.

Supplying, Fixing of buzzers with 5A bell push switch including cost of all materials, lead, lift, labour charge, etc., complete.

Drilling 100 mm dia hole in brick wall and fixing suitable size PVC pipe in wall for providing cables for out door condencing unit including cost of all materials,labour, lead, lift, labour charge, etc., complete.

Drilling 50 mm dia hole in brick wall and fixing suitable size PVC pipe in wall for providing cables for out door condencing unit including cost of all materials, labour, lead, lift, etc., complete.

Laying fixing of Controflex (slicagel) compound in around window & ventilator for protection of rain water including cost of all materials, labour, lead, lift, etc., complete.

Supplying and fixing of 100mm dia. stoneware pipe with open joint and covered with pan tiles including all cost of materails,labour, lead lift etc complete.

Supplying and fixing in position of best quality mirror (22" x 16") with aluminium frame over wash basin including cost of all materials labour, lead, lift, etc. complete as directed by the engineer at site

Supplying and fixing of approved quality of aluminium towel rod with powder coating of size (2 ft) and fixing the same over teak wood round block and soap tray (PVC) in bath room including cost of all materials lead lift labour etc complete as directed by department Engineer at site

Supplying and fixing of PVC shower and Nickle control valve complete

Supply & fixing granite partition of 25 mm thick 600 mm wide and 1200 mm high including necessary cement mortar with colour cement concrete for urinals as directed by department Engineer at site

Providing opening for cable,Exhaust fan AC duct, water pipe line etc in brick work/RCC in building and retaining wall & cable duct including cost of machinaries labour etc complete

Painting with two coats of approved enamel paint over one coat of primer for all M.S door window ,gates etc. including cost of all materilas,labour ,lead and lift etc. complete.

Providing projected border 20 Cm width in CM 1 : 3, 20 mm thick including cost of all materials, labour, lead, lift, etc., complete.

Providing projected border 7.5 Cm width in CM 1 : 3, 20 mm thick including cost of all materials, labour, lead, lift, etc., complete.

Supply and fixing of multi way PVC floor trap 100 x 75 mm as directed by the Engineer at site cost of all materials, labour, lead, lift, etc., complete.

Suuply and fixing double side polished 38 mm thick cuddappa slab for cub boards including cost of all materials, labour, lead, lift, etc., complete.

Providing Decorative terracoata tiles over CM 1:3,20mm thick pointed with white cement over the sun shade slabs / portico etc., and painting two coats including cost of all materials, labour,lead, lift, etc., complete.

Manufacturing, supplying and fixing in position of RCC jolly of 5 cm thick in Cement concrete 1:2:4 using 20 mm machine crushed stone jelly (Excluding cost of reinforcement steel) including cost of mould, finishing , curing, lifting, fixing in position etc., complete complying with standard specification as directed by the Engineer at site.

Supplying and lying in position of ceramic chennal of 150mm wide for drain of best quality and approved make complying with standard specification and as dircted by the engineer at site including the cost of all materials labour, lead, lift, T&P etc..

Providing sealant materials in the expansion joint in the terrace floor up to a depth of 52mm, cleaning the edges properly to remove dust, stain, oil etc, finishing the edgs with polimer modified mortar viz. mixture of cement, sand with water & poly propylene with water proofing compound, applying Epoxy adhesive on the grooves of 1000 series products & also on the concrete surface, compress & install 'REACT 1000 - A01-044' of vexcolt/ Uk or equivalent for 40mm width in the expansion joint, finishing the system flush with to existing surface, including the cost of all materials, lead, lift, T&P, etc. complete.

Forming expansion joints in roof slab with 18 gauge GI sheets as per 2B plan W.No 2/41 revised TNBP specification.

Supplying, laying and fixing of GI Chain link fencing with mesh size 50x50mm10gauge and GI angle of size 50x50x6mm including GI binding wire, laying& tensioning cost of all materials labour lead lifts, etc., complete. as per standard specification

Supplying and fixinfg R C C collar 60 cm dia 60cm height for Earth pit including cost of cement, steel , centering, labour, curing, all leads and lifts, etc., complete. as per standard specification

Supplying and spreading 100 mm tk of 20 mm metal over crusher dust , including cost of , all materials, labour, curing, all leads and lifts, etc., complete. as per standard specification

Supplying and spreading 100 mm tk of 40 mm metal over crusher dust , including cost of , all materials, labour, curing, all leads and lifts, etc., complete. as per standard specification

Supplying and spreading crusher dust 100mm thick , including cost of Antiweed treatment with all materials, labour, curing, all leads and lifts, etc., complete. as per standard specification

Labour charges for transporting of all types of cable duct cover slab to working site from curing tank and keeping them alignment in position including lead, lift etc., complete

Supply and fixing of 100 mm dia "B" class GI pipe of approved quality and make as directed by the engineer at site including cost of all specials materials, transport, lead , lift etc, complete

Supplying and fixing in position of 100 mm dia gun metal gate valve leader make of best quality including cost of materials lead lift labour etc complete.as directed by department Engineer at site

Supplying and fixing rolling shutter mechanically operated with gear box crank handle top cover of 18 gauge thick MS sheet anchoring rod, hasp & shackle to details including labour and materials for providing pockets to guides of rolling shutters making necessary holes in masonry or concrete 1:2:4 and making good, including one shop coat of anit-corrosive primer erectd in position (size 2500x2500mm) with high tension coils, type spring arrangements.as directed by department Engineer at site

Assembling of templates and fixing the foundation bolts in position without any tilt until completion of concrete,checking the alignment for various structures including cost of template, labour,lead lifts etc complete. For Towers and lightening mast

Assembling of templates and fixing the foundation bolts in position without any tilt until completion of concrete,checking the alignment for various structures including cost of template, labour,lead lifts etc complete. For equipment Plinth

Fabricating, galvanising & supplying of foundation bolts using EN 8 steel of various sizes as per drawing with 3 Nos GI nuts including welding a plate of size 100x100x12mm thick as required size at the bottom of bolt including cost of materials,labour,lead lift etc., complete

Fabricating,galvanising & supplying of foundation bolts using GI steel of various sizes as per drawing with 3 Nos GI nuts including welding a plate of size 100x100x12mm thick as required at the bottom of bolt including cost of materials,labour,lead lift etc., complete

Fabrication, galvanising and suplying of Tower parts ( Various structures for 400 KV substation ) as per bill of materials and as per the standard specificaion at site including cost of all materials etc.complete.

Labour charges for Transport and erection of substation towers including tightening of bolts and nuts with washers, final checking before loading the structures, cost of all labour, T&P, lead and lift etc. complete.

Supply of GI bolts and nuts and washers of various sizes conforming to latest relevent IS including cost of materials ,transport to site with all lead and lift etc., Complete.

Providing necessary pocket holes in transformer plinth for accessories supports etc complete

Supply and fixing of MS rails of approved quality in transformer plinth including cost of material and fixing charges etc complete

Design of foundation for types of towers, support structures, lightning Mast all equipments, transformer and allied structures, cable duct/trench, road ,road side drain, compound wall etc required for the substation and submission of design, detailed drawings etc as per standard specifications

Supplying, fabricating and fixing in position of G.I angles for cable duct spliting the fixed end of angles for anchorage including cost of steel labour lead and lift and hot tip of galvanizing charges etc complete

Drilling suitable holes using power drilling machine to the required depth to fix the angle without disturbing the strength of the concrete including hire charges for drilling machine cable lead lift etc complete

Supplying and fixing of 75 mm dia PVC pipe of approved ISI mark for weep holes for RCC vertical wall including cost of pipe lead, lift, labour etc., complete as per standard specification.

Supply and Fixing of 6 rows of barbed wire 10 gauge for fencing in " Y" Angle 50x50x6 mm and two cross wire between the column including cost of angle, barbed wire, transporting to the site including all labour, leads, lifts etc complete

Providing laying Granular sub base on prepared sub grade using grading -1 material using IRC 53mm-2.36mm graded stone aggregate in accordance with the requirements of the specification. The material shall be laid in one or more layers as sub-base as necessary according to line grades and cross section shown in drawings or as directed by the Engineer

Providing and laying Wet Mix Macadam Base course of 250 mm compacted thickness in two layers of 125 mm thick or else specified on the prepared sub-base with IRC 45-2.36mm graded stone aggregate and granular material of quality size and grading in layers as specified, including mixing in Base Mix Plant, spreading in uniform layer with motor grader and compaction with vibrating roller of 80 - 100KN static weight and fine dressing to required grade and cross slope as directed by dept Engineer at site.

Providing and applying prime coat over WMM surface 6 kg of bitumen Emulsion (SS II) per 10sq.m area including cost and conveyance of bituminous binder including labour charges for preparing the surface and applying the required quantity of bitumen as tack coat by bitumen sprayer etc., complete as clause 503 of MORT & H specifications

Providing and laying Bituminous Macadam of 50mm thickness which work shall consist of construction, in a single course of compacted crushed aggregates premixed with 60/70 grade bitumen at the rate if 3.5 percent by weight of total mix to serve as base/binder course, in accordance with the requirement of the specifications and in conformity with the drawing or as directed by the Engineer. (Using CMP, Paver).

Providing and applying tack coat over BM surface 2.50kg of bitumen Emulsion (RS-I) per 10sq.m area including cost and conveyance of bituminous binder including labour charges for preparing the surface and applying the required quantity of bitumen as tack coat by bitumen sprayer etc., complete as clause 503 of MORT & H specification

Providing and laying semi dense bituminous concrete 25mm thick compacted which shall consist of construction of a single course binder/wearing course on a previously prepared bituminous base to the requirements of the specification.

Providing of RCC Heavy duty pipe (NP3) 600 mm dia across road crossing including cost of collar pipe as directed by department engineer at site for cable crossing and storm water drainage including all materials ,labour,leads and lift etc, complete.

Providing of RCC Heavy duty pipe (NP3) 300 mm dia across road crossing including cost of collar pipe as directed by department engineer at site for cable crossing and storm water drainage including all materials, labour, leads and lift etc, complete.

Supply and laying of 65mm dia GI Pipe B class including cost of materals labour, lead and lift etc. complete.

Supply of Three drawer table wooden/steel furniture manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete. sample to be approved by department Engineer

Supply of S type chair made of steel manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete. sample to be approved by department Engineer

Supply Side rack open type 4 self wooden/steel furniture manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete. sample to be approved by department Engineer

Supply of steel Half bench manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete. sample to be approved by department Engineer

Supply of Revolving chair manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete. sample to be approved by department Engineer

Supply of Operater table 6' x 5' wooden/steel furniture manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete. sample to be approved by department Engineer

Supply of PVC chair of reputed make or any other ISI mark including cost of all materials, labour, lead and lift etc., complete. sample to be approved by department Engineer

Providing concrete road with R.C.C 1:2:4,150 mm thick over M 10 grade concrete 100 mm thick using 12 to 20 mm metal including cost of materials,labour, leads and lifts etc.complete.

Providing expansion joint for road concrete as per specification in both direction using prevalid aspheltics pad 20 mm thick to full width and depth of 150 mm thick plastering with CM 1:3, 20 mm thick including cost of cement, all materials, labour, curing, all leads and lifts etc., complete as per standard specification.

Description of Work / Item(s)

Amount

500 MVA, 3 Phase, 50Hz, 400/230-33KV, YNaod11 Auto Transformer with RTCC Panel and all accessories, Terminal connectors and clamps and with Neutral CT for enabling REF protection and using PLC to control Fans, Pumps and OLTC with RTCC and must be compatible with the SAS. System equipments for Nitrogen Injection Fire Protection System including FRLS cables, accessories, Heat Sensor for Fire Detectors and Spare Nitrogen Cylinder Regulator Assembly.

200 MVA,3 phase, 50Hz, 400/110-33 KV YNaod11 Auto Transformer with RTCC Panel and all accessories, Terminal connectors and clamps and with Neutral CT for enabling REF protection and using PLC to control Fans, Pumps and OLTC with RTCC and must be compatible with the SAS System equipments for Nitrogen Injection Fire Protection Systems including FRLS cbles, accessories, Heat Sensor for Fire Detectors Spare Nitrogen Cylinder Regulator Assembly

125 MVAR,3 phase,50Hz 400KV Bus reactor (Without NGR)with Neutral CT with associated equipments, Terminal connectors and clamps. System equipments for Nitrogen Injection Fire Protection Systems including FRLS cables, accessories, Heat Sensor for Fire Detectors, Spare Nitrogen Cylinder Regulator Assembly.

420 KV, 3150 A, 63 KA, SF 6 Circiut Breaker 220 V DC Control (without pre insertion resister) with Control switching device. (CSD) and all accessories, Terminal connectors and clamps including mounting structure G I Bolt and standing lader arrangements.

420 KV, 3150 A, 63 KA, SF 6 Circiut Breaker 220 V DC Control with pre insertion resister and all accessories, with Terminal connectors and clamps including mounting structure G I Bolt and standing lader arrangements.

245 KV, 2000 A, 50 KA, SF 6 Circiut Breaker 220 V DC Control with all accessories, with Terminal connectors and clamps including mounting structure G I Bolt and standing lader arrangements.

145 KV, 2000 A, 40 KA, SF 6 Circiut Breaker 220 V DC Control with all accessories, with Terminal connectors and clamps including mounting structure G I Bolt and standing lader arrangements.

420 KV, 3000 A, 63 KA, 5 Core Single phase Outdoor Current Transformer (Ratio 3000-2000-1000-/1A) with Terminal Connectors and clamps, G I Tubular Mounting Structure , Hot Dip Galvanising Steel Bolt (1 No.Junction Box for 3Nos CT's)

245 KV, 2000 A, 50 KA, 5 Core Single phase Outdoor Current Transformer (Ratio 2000-1200-800-/1A) with Terminal Connectors and clamps.G I Tubular Mounting Structure, Hot Dip Galvanising Steel Foundation Bolt (1 No.Junction Box for 3Nos CT's)

145 KV, 1200 A, 40 KA, 5 Core Single phase Outdoor Current Transformer (Ratio 2000-1200-800/1A) with Terminal Connectors and clamps, G I Tubular Mounting Structure, Hot Dip Galvanising Steel Bolt (1 No.Junction Box for 3Nos CT's)

420 KV, 200 VA, 400KV/√3/110 V /√3, Capacitive Voltage Transformer with Terminal Connectors and clamps, G I Tubular Mounting Structure , Hot Dip Galvanising Steel Bolt (1 No.Junction Box for 3Nos CVT's)

245 KV, 200 VA, 230KV/√3/110 V /√3, 50KA Line Voltage Transformer with Terminal Connectors and clamps G I Tubular Mounting Structure Hot Dip Galvanising Steel Bolt (1 No.Junction Box for 3Nos LVT)

145 KV, 200 VA, 110KV/√3/110 V /√3, Line VoltageTransformer with Terminal Connectors and clamps,G I Tubular Mounting Structure, Hot Dip Galvanising Steel Bolt (1 No.Junction Box for each LVT)

245 KV, 200 VA, 50KA 230KV/√3/110 V /√3, Potential Transformer with Terminal Connectors and clamps,G I Tubular Mounting Structure, Hot Dip Galvanising Steel Bolt (1 No.Junction Box for 3Nos PT)

145 KV, 200 VA, 110KV/√3/110 V /√3, Potential Transformer with Terminal Connectors and clamps, G I Tubular Mounting Structure ,Hot Dip Galvanising Steel Bolt (1 No.Junction Box for 3Nos PT)

390 KV, 10KA Station Type Lightning Arrestor with surge Monitor, Terminal connectors and clamps and all accessories, G I Tubular Mounting Structure, Hot Dip Galvanising Steel Bolt

216 KV, 10KA Station Type Lightning Arrestor with surge Monitor, Terminal connectors and clamps and all accessories G I Tubular Mounting Structure Hot Dip Galvanising Steel Bolt

96 KV, 10KA Station Type Lightning Arrestor with surge Monitor, Terminal onnectors and clamps and all accessories G I Tubular Mounting Structure Hot Dip Galvanising Steel Bolt

420 KV, 3150 A, 63 KA, Horizontal double Break with Single earth switch- 440 V AC Motor operated with 220 V DC Control, 3Nos MOMD for Main Blade and 3 Nos MOMD for earth switch with G I Tubular Mounting Structure , Hot Dip Galvanising Steel Bolt with Solid core insulators and Terminal connectors and clamps.

420 KV, 3150 A, 63 KA, Horizontal double Break with Double earth switch- 440 V AC Motor operated with 220 V DC Control, 3Nos MOMD for Main Blade and 6 Nos MOMD for earth switch including G I Tubular Mounting Structure Hot Dip Galvanising Steel Bolt with Solid core insulators and Terminal connectors and clamps.

245 KV, 2000 A, 50 KA, Horizontal Centre Rotating Double Break with Single earth switch- 440 V AC Motor operated with 220 V DC Control, 1 No MOMD for Main Blade and 1 No MOMD for earth switch with G I Tubular Mounting Structure Hot Dip Galvanising Steel Bolt with Solid core insulators and Terminal connectors and clamps.

245 KV, 2000 A, 50 KA, Horizontal Centre Rotating Double Break with out earth switch- 440 V AC Motor operated with 220 V DC Control, 1 No MOMD for Main Blade with G I Tubular Mounting Structure Hot Dip Galvanising Steel Bolt with Solid core insulators and Terminal connectors and clamps.

145 KV, 2000 A, 40 KA, Horizontal Centre Rotating Double Break with Single earth switch- 440 V AC Motor operated with 220 V DC Control, 1 No MOMD for Main Blade and 1 No MOMD for earth switch including G I Tubular Mounting Structure , Hot Dip Galvanising Steel Bolt with Solid core insulators and Terminal connectors and clamps.

145 KV,2000 A, 40 KA, Horizontal Centre Rotating Double Break with out earth switch- 440 V AC Motor operated with 220 V DC Control, 1 No MOMD for Main Blade. including G I Tubular Mounting Structure Hot Dip Galvanising Steel Bolt with Solid core insulators and Terminal connectors and clamps.

420 KV, 3150 A, 63 KA, Vertical Operated Single Break Bus Earth switch- 440 V AC Motor operated with 220 V DC Control, 1 No MOMD for earth switch. including G I Tubular Mounting Structure Hot Dip Galvanising Steel Bolt with Solid core insulators and Terminal connectors and clamps.

245 KV, 2000 A, 50 KA, Vertical Operated Single Break Bus Earth switch- 440 V AC Motor operated with 220 V DC Control, 1 No MOMD for earth switch,including G I Tubular Mounting Structure Hot Dip Galvanising Steel Bolt with Solid core insulators and Terminal connectors and clamps.

145 KV,2000 A, 40 KA, Vertical Operated Single Break Bus Earth switch- 440 V AC Motor operated with 220 V DC Control,1 No MOMD for earth switch including G I Tubular Mounting Structure Hot Dip Galvanising Steel Bolt with Solid core insulators and Terminal connectors and clamps.

420 KV, Solid core Insulator with Corona ring G I Tubular Mounting Structure with Hot Dip Galvanising Steel Bolt with Terminal connectors and seating clamps.

245 KV, Solid core Insulator G I Tubular Mounting Structure with Hot Dip Galvanising Steel Bolt with Terminal connectors and seating clamps.

145 KV, Solid core Insulator G I Tubular Mounting Structure with Hot Dip Galvanising Steel Bolt with Terminal connectors and seating clamps

LT 433 V, AC Distribution Board with MCB's with LT Circuit Breaker Control and Change over switch for 400 KV SS

800A AC change over switch

220V DC Distribution board with MCBs, with one control Panel each for change over arrangement of Charger supply

200 A DC change over switch with panel (1 panel for 4 Switches)

Out door 433 V AC Distribution Cubic with 20 Nos, 32 A MCB's and 10 Nos, 16 A MCB's, with weather proof stainless steel cabinet for all equipmnets/ Isolators.

Outdoor 433 V AC Distribution Cubic with 1 No, 200 A MCB's and 10 Nos, 32 A MCB's, with weather proof stainless steel cabinet for ICT's and Reactors.

Outdoor 220 V DC Distribution Cubic with 30 Nos, 32 A MCB's with weather proof stainless steel cabinet for all equipmnets/ Isolators/ICT's and Reactors.

Outdoor 433 V AC Distribution Cubic with 10 Nos, 32 A MCB's with weather proof stainless steel cabinet for LLM .

220 V DC, 400 AH, battery complete set with Single tier teak wood stand, insulator and terminal connectors, Hydrometer Room thermometer, Multimeter and with all accessories

220 V, 80 A Float, float cum Boost Battery Charger with Change over switch.(FC+FCBC)

220 V DC, 300 AH, battery complete set with Single tier teak wood stand, insulator and terminal connectors, Hydrometer Room thermometer, Multimeter and with all accessories

220 V, 60 A Float / Float cum Boost Battery Charger with Change over switch.(FC+FCBC)

48V DCDB with MCB's, DC Change over switch, neccessary cabling for 48 V DC Charger and 48 V DC Batteries

48 V DC, 400 AH, battery complete set with Single tier teak wood stand, insulator and terminal connectors, Hydrometer Room thermometer, Multimeter and with all accessories

48 V, 120 A Float , float cum Boost Battery Charger with Change over switch.(FC+FCBC)

Control and Protection Panel for 400KV Line/Feeders

Control and Protection Panel for 400KV Tie breaker bay

Control and Protection Panel for 400KV/230KV Inter Connecting Transformers

Control and Protection Panel for 400KV/110KV Inter Connecting Transformers

Control and Protection Panel for 400KV Bus Reactor

400KV Bus Bar Protection Panel

Synchronising cum Islanding Panel for 400KV bays

Control and Protection Panel for 230KV Line/Feeder

Control and Protection Panel for 230KV Transfer Bus Coupler bay

230KV Bus Bar Protection Panel

Synchronising cum Islanding Panel for 230KV bays

Control and Protection Panel for 110KV Line/Feeder

Control and Protection Panel for 110KV Transfer Bus Coupler bay

110KV Bus Bar Protection Panel

Synchronising cum Islanding Panel for 110KV bays

Spares for Control and Protection panel and for SAS

Sub station Automation system for 400/230-110KV AIS for 42 bays (8 Nos 400KV dia, 9 Nos 230KV bays, 12 Nos 110KV bays)

DFR (digital fault recorder) system with PMU (phasor measurement unit) complete with all devices for 6 Nos 400KV lines and DFR workstation

Spares for DFR cum PMU equipment (comprises 1 No Acquisition unit and hardware modules of each type for Evaluation unit, necessary accessories)

Outdoor armoured 24core FO cable for connectivity of all Kiosks with the SAS LAN and with station Auxilliary systems including all FODP's

Digital Protection Coupler (Including Remote end stations).

Optic Line Terminal equipments(OLTES), STM 16/4 optical interface cards and STM 4/1 optical interface cards with cross connect Multiplexer.

EPAX for PLCC system for 48 Subscripers and 16 Trunks

Telephone Cable (4 Pair 5 Nos, each with 500 Mtrs.)

Telephone

Digital Multimeter (AC/DC)

5KV Digital Insulation Tester

Tong Tester (200 mA-20 Amps-200 Amps)

Tong Tester (Upto 2000 Amps) AC

Oil BDV kit

1KV Analog Megger(Hand Operated)

Circuit Breaker Analysing Kit (Multi break)

On Line Earth Tester

Primary Injection Kit(2000 Amps Continuous)

Current Transformer and Potential Transformer Analyser Kit latest

Optical Source Meter

Optical Power Meter

Optical Splicing Machine and Splicing Kit

Ultra Long Haul Optical Time Domain Reflectometer

Bit error rate meter

Optical to E1 converters

Computerised Relay Test kit (Three phase fully automatic relay test kit with IEC61850 test features and Laptop computer of reputed make: 1 set)

FODB (48 Fibre capacity) as per standards

T&P Furniture

PC & Software

LED Bulb (20Watts of Higher) for emergency lighting of Control Room)

Armoured Copper Control Cable 8CX 4mm2

Armoured Copper Control Cable 4CX4mm2

Armoured Copper Cable 4CX16mm2

Armoured Copper Control Cable 28 C X 2.5mm2

Armoured Copper Control Cable 14 C X 2.5mm2

Armoured Copper Control Cable 20C X 2.5mm2

Armoure Copper Control Cable 4C X 2.5mm2

Armoured Copper Control Cable 8CX 2.5mm2

Armoured Copper Control Cable 2CX2.5mm2

LT Power cable 4C x 120 sq.mm AL

LT Power cable 4C x 240 sq.mm AL

LT Power cable 4C x 25 sq.mm AL

LT Power cable 2C x 16 sq.mm AL

Armoured Fibre Optic Cable 48 Core (For communication equipment)

Armoured Copper Cable 2x35mm2

Gland and End connectors forOptic Fibre Cables

Cable Gland of Various size

Copper sockets of various sizes for wiring termination with necessary PVC sleeves, cable tie etc.,

11 KV , 160 KN Anti fog Strain Disc Insulator

11 KV ,120 KN Anti fog Strain Disc Insulator

100mm Dia Aluminium Bus Bar with welding sleeve

75mm Dia Aluminium Bus Bar with welding sleeve

ACSR Moose Conductor

Electrical Insulation Anti skid Rubber mat 2000X1000X13mm

Trolley Mounted adjustable Telescopic GI Ladder 12 Meter Height

Aluminium Ladder 8 Mtrs Length

Aluminium Ladder 4 Mtrs Length

Discharge rod made of hard PVC,copper flat and 6sq.mm cable

Earth Rod made of hard PVC,copper flat and 6 sq.mm cable

First Aid Box

Digital clock for GPS Time calibration

Portable Emergency Lamp-Rechargable Type

Emergency lampwall mounted with Battery backup

GI Ladder type Cable Tray 2.5m L, 0.3m W and 2mm thickness with coupling plate and bolt nuts

GI Ladder type Cable Tray 2.5m L, 0.45m W and 2mm thickness with coupling plate and bolt nuts

GI Ladder type Cable Tray 2.5m L, 0.60m W and 2mm thickness with coupling plate and bolt nuts

Steel Bolt and Nut,Spring Washer and Flat washer of reputed make of various size for use to all power connectors

Red oxide Paint of reputed make for painting of all EarthRaisers and MS materials

Aluminium Paint wherever necessary

Anti Corrossive black paint of reputed make for painting of all joints in Earth Raiser connections and Earth mats

Enamel Paint of reputed make of various colours for colour coding painting of Bottom of all structures,equipments and name boards as per field requirement

Reflector sticker of reputed make for colour coding of all equipments and structures

T clamp to suit Twin MOOSE ACSR on all ways with 450mm sub-conductor spacing

T clamp to suit Twin MOOSE on main ways with 450mm sub-conductor spacing and single MOOSE on branch way

T clamp to suit Twin Moose on main way with 450mm sub-conductor spacing and Twin Moose ACSR on branch way with 450mm sub-conductor spacing

T clamp to suit 4" IPS Al. tube on Main way and Quad MOOSE on Branch way with 450mm sub-conductor spacing

T clamp to suit 4" IPS Al. tube on Main way and Twin MOOSE on Branch way with 450mm sub-conductor spacing

Corona Bell to suit 4" IPS Al. tube

420kV Bolted type Double Tension String assembly suitable for 25 no.Anti fog type 160kN Disc Insulators per string and its associated hardware accessories with turn buckle, with double anchoring, corona ring, and tension clamp set suitable for Twin MOOSE ACSR bundle with 450mm Sub conductor spacing.

420kV Bolted type Double Tension String assembly suitable for 25 no.Anti fog type 160kN Disc Insulators per string and its associated hardware accessories without turn buckle, with double anchoring, corona ring, and tension clamp set suitable for Twin MOOSE ACSR bundle with 450mm Sub conductor spacing.

420kV Bolted type Single Suspension String assembly suitable for 25 no. Anti fog type disc insulator of 120kN, with Drop Clamp and its associated hardware accessories suitable for Twin MOOSE ACSR with 450mm Sub Conductor spacing.

420kV Bolted type Single Suspension String assembly suitable for 25 no. Anti fog type disc insulator of 120kN, with Drop Clamp and its associated hardware accessories suitable for Quad MOOSE ACSR with 450mm Sub Conductor spacing.

420kV Bolted type Double Tension String assembly suitable for 25 no. Anti fog type 160kN Disc Insulators per string and its associated hardware accessories with turn buckle, with double anchoring, corona ring, arcing horn and tension clamp set suitable for 4 x MOOSE ACSR bundle with 450mm Sub conductor spacing.

420kV Bolted type Double Tension String assembly suitable for 25 no. Anti fog type 160kN Disc Insulators per string and its associated hardware accessories without turn buckle, with double anchoring, corona ring, arcing horn and tension clamp set suitable for 4 x MOOSE ACSR bundle with 450mm Sub conductor spacing.

Rigid Spacers to suit 2 x MOOSE ACSR Conductor with 450mm sub conductor spacing.

Rigid Spacers to suit 4 x MOOSE ACSR Conductor with 450mm sub conductor spacing.

T clamp to suit 2 x MOOSE ACSR on all ways with 225mm sub conductor spacing

T clamp to suit 2 x MOOSE ACSR on main way with 225 sub-conductor spacing and 2 x MOOSE ACSR on branch way with 225mm sub-conductor spacing.

T clamp to suit 2 x MOOSE on main way with 225mm sub-conductor spacing and 1 x MOOSE ACSR on branch way.

T clamp to suit 3" IPS Al. tube on Main way and 2 x MOOSE ACSR on Branch way with 225mm sub-conductor spacing

T clamp to suit 4"IPS Al tube on main way and 2 x MOOSE ACSR on branch way with 225mm sub-conductor spacing.

T clamp to suit 3" IPS Al. tube on Main way and 2 x MOOSE ACSR on Branch way with 225mm sub-conductor spacing

Terminal Connector on 230KV Underhung post insulator to suit 2 x MOOSE ACSR with 225mm sub-conductor spacing-Through type

Terminal Connector on 230KV Underhung post insulator to suit 4 x MOOSE ACSR with 225mm sub-conductor spacing-Through type

230kV Bolted type Double Tension String assembly with double anchoring suitable for 15 no. anti fog type 160kN Disc Insulators per string and its associated hardware accessories with turn buckle, tension clamp set suitable for 2 x MOOSE ACSR bundle with 225mm Sub conductor spacing.

230kV Bolted type Double Tension String assembly with double anchoring suitable for 15 no. anti fog type 160kN Disc Insulators per string and its associated hardware accessories without turn buckle, tension clamp set suitable for 2 x MOOSE ACSR bundle with 225mm Sub conductor spacing.

230KV Underhung Insulator (8KN) for suspension for connecting 2 x MOOSE ACSR with 225mm sub conductor spacing

230kV Bolted type Double Tension String assembly with double anchoring suitable for 8 no. anti fog type 160kN Disc Insulators per string and its associated hardware accessories tension clamp set suitable for 2 x MOOSE ACSR bundle with 225mm Sub conductor spacing on both side insulator hardware.

230kV Bolted type Double Tension String assembly suitable with double anchoring for 15 no. anti fog type 160kN Disc Insulators per string and its associated hardware accessories with turn buckle tension clamp set suitable for 4 x MOOSE ACSR bundle with 225mm Sub conductor spacing

230kV Bolted type Double Tension String assembly suitable with double anchoring for 15 no. anti fog type 160kN Disc Insulators per string and its associated hardware accessories without turn buckle tension clamp set suitable for 4 x MOOSE ACSR bundle with 225mm Sub conductor spacing

230KV Underhung Insulator (8KN) for suspension for connecting 4 x MOOSE ACSR with 225mm sub conductor spacing

Rigid Spacers to suit 4 x MOOSE ACSR Conductor with 225mm subconductor spacing.

Rigid Spacers to suit 2 x MOOSE ACSR Conductor with 225mm subconductor spacing.

T clamp to suit 2 x MOOSE ACSR on all ways with 225mm sub conductor spacing

T clamp to suit 2 x MOOSE ACSR on main way with 225 sub-conductor spacing and 2 x MOOSE ACSR on branch way with 225mm sub-conductor spacing.

T clamp to suit 2 x MOOSE on main way with 225mm sub-conductor spacing and 1 x MOOSE ACSR on branch way.

T clamp to suit 3" IPS Al. tube on Main way and 2 x MOOSE ACSR on Branch way with 225mm sub-conductor spacing

T clamp to suit 4"IPS Al tube on main way and 2 x MOOSE ACSR on branch way with 225mm sub-conductor spacing.

Corona Bell to suit 3" IPS Al. tube

110kV Bolted type Double Tension String assembly with double anchoring suitable for 10 Nos. anti fog type 160kN Disc Insulators per string and its associated hardware accessories with turn buckle, tension clamp set suitable for 2 x MOOSE ACSR bundle with 225mm Sub conductor spacing.

110kV Bolted type Double Tension String assembly with double anchoring suitable for 10 Nos. anti fog type 160kN Disc Insulators per string and its associated hardware accessories without turn buckle, tension clamp set suitable for 2 x MOOSE ACSR bundle with 225mm Sub conductor spacing.

110KV Underhung Insulator (8KN) for suspension for connecting 2 x MOOSE ACSR with 225mm sub conductor spacing

110kV Bolted type Double Tension String assembly with single anchoring suitable for 10 no. anti fog type 160kN Disc Insulators per string and its associated hardware accessories tension clamp set suitable for 2 x MOOSE ACSR bundle with 225mm Sub conductor spacing on both side insulator hardware.

110kV Bolted type Double Tension String assembly with double anchoring suitable for 10 nos. anti fog type 160kN Disc Insulators per string and its associated hardware accessories with turn buckle tension clamp set suitable for 4 x MOOSE ACSR bundle with 225mm Sub conductor spacing

110kV Bolted type Double Tension String assembly with double anchoring suitable for 10 nos. anti fog type 160kN Disc Insulators per string and its associated hardware accessories without turn buckle tension clamp set suitable for 4 x MOOSE ACSR bundle with 225mm Sub conductor spacing

110KV Underhung Insulator (6KN) for suspension for connecting 4 x MOOSE ACSR with 225mm sub conductor spacing

Rigid Spacers to suit 4 x MOOSE ACSR Conductor with 225mm subconductor spacing.

Rigid Spacers to suit 2 x MOOSE ACSR Conductor with 225mm subconductor spacing.

Fired 'C' Type Boltless wedge connectors to suit moose conductor to moose conductor connections.

Fired 'C' Type Boltless wedge connectors to suit moose conductor to Equipment connections.

230KV Bolted type suspension fitting suitable for Quad moose

230 KV Bolted type suspension fitting suitable for Twin moose

110 KV Bolted type suspension fitting suitable for Quad moose

110 KV Bolted type suspension fitting suitable for Twin moose

420kV Single Suspension String assembly suitable for 25 no.Anti fog type disc insulator of 120kN, with Through Clamp and its associated hardware accessories suitable for Twin MOOSE ACSR with 450mm Sub Conductor spacing.

T clamp for single moose to single moose for 400KV

Free end clamp 4" Al. bus (expansion type)

Free end clamp 3" Al. bus (Rigid/sliding)

Free end clamp 3" Al. bus (expansion type)

Mechanical foam type fire extinguisher trolly mounted 60 Ltrs capacity with complete set with hose and air induction nozzle and all accessories strictly confirming to latest issue of IS 13386/1992 with ISI certification

Mechanical foam type portable 9ltrs capacity fire extinguisher with initial charge complete with chromium plated GI Cap, High pressure nylon braided discharge hose, nozzle and all accessories strictly confirming to latest issue of IS 10204/2001 with ISI certification

Dry chemical Power Cylindrical shape fire extinguisher with initial charge complete with rubber or braided hose dry powder level indicator and all accessories strictly confirming to the latest issue of IS specified with ISI certification Fire extinguisher DCP type trolley mounted 25KG capacity with accessories

Dry chemical Power Cylindrical shape fire extinguisher with initial charge complete with rubber or braided hose dry powder level indicator and all accessories strictly confirming to the latest issue of IS specified with ISI certification Fire extinguisher DCP type Portable 9KG capacity

Dry chemical Power Cylindrical shape fire extinguisher with initial charge complete with rubber or braided hose dry powder level indicator and all accessories strictly confirming to the latest issue of IS specified with ISI certification Fire extinguisher DCP type Portable 6KG capacity

Manufacturing and supply of Fire bucket of 10 litre capacity made out of 26(0.46) SWG MS Sheet painted with white & red enamel paint inside & outside respectively : bottom of bucket shall be U shaped outside of the bucket shall be written as Fire in English & tamil in white enamel paint,including cost of all materials

Manufacturing and supply Supply of sand drum made out of oil drum of size 580mm dia and 420 mm height with conical cover madeout of tin sheet provided with handle including the cost of barrel,sand and consumables as directed by the field engineer

Fire shed suitable to storing outdoor fire equipments near Auto Transformer and 230Kv Breakers

Fire stand suitable to Battery Room

Fire protection alaram system for Main control room building, Cable gallery and for all the Kiosk buildings with smoke detectors

Fire fighting equipments Display Boards and first aid safety chart boards as required.

First Aid Box and Artificial Respiration kit as required.

MS Rod 40mm for Earth Mat, Auxiliary earth mat and Earth Electode, MS Flat 75X12mm for earth raiser for earthing system, Earth Spike with standard GI Pipe/GI Round rod 40mm dia, Height 3000mm, Provision for sharp edge at top,Provision for earth connections to MS Flat 65X10mm/GI Earth wire 7/3.55, 3 run each and painting as required by the field engineer.

Supply of maintanance free earthing system consisting of one copper bonded Earthing Electrode 17.20mm dia 3050mm length (10 feet) length with 250micron copper bonding along with 2 bags of (11.3kg each) of Ground enhancement mwterial (GEM 25A) and 50x50x25mm size clmap, 65x10mm, 200mm length Flat for terminal connector

Special compound to improve earth electrode resistance

250KVA Diesel Generator Set with all accessories with provision of Automatic Main Failure(AMF) Panel for emergency AC supply

11KV/433V, 500KVA Station transformer (including structure) with 4 way FRP pillar box and with suitably rated SCADA ready RMU (RRLL configuration) with FRTU including suitably rated HT cable between RMU to station transformer and termination kit and LT supply cable, accessories and arrangements, FO communication cable with necessary media converters for integrating FRTU in RMU with SAS

Outdoor yard illumination for switch yard, LLM tower, street lighting with tubular pole as per specification and design, including all materials and consumables using LED technology for arriving LUX level of 30.

AC FRP junction box

DC FRP interlock junction box

AC Distribution Panel for Kiosk

DC Distribution Panel for Kiosk

3KVA,UPS for emergency lighting of control room

Visual monitoring system for monitoring complete switchyard and control room for day and night for monitoring of the entire switch yard area and for security of premises

Supply of complete packaged AC unit including duct and accessories with 50% redundancy duly considering the heat loads for entire control room and office room

Environmental control unit which comprise of 2 Nos. two tonne capacity and type split A/C Air conditioners (1 Main + 1 standby) working inconjunction through a microprocessor based controller for desired operation.Each unit should have two compressors etc complete as per standard specification .

LC/Key Board/Earth Mat &Earth Electrode layout of size 3000 mm X 1500 mm out of 75X25 mm Alu. Frame embedded with 12mm pre laminated wood particle board using screw on rear two Nos plain class of 5 mm thick fixed with metal roller moving on Aluminium Channel with on front with locking arrangement LG class piece should be fastended on the glass shutters for opening and closingwall clamp made out of 6mm MS plate should be provided on as per drawing along with hook for key with token and as directed by the field engineer including cost of all materials.

110 KV, 1 x 630 Sq.mm Aluminium XLPE UG Cable

110 KV, 10 KA Station Type Lightning Arrestor with surge Monitor, Terminal connectors and all accessories Including G I Tubular Mounting Structure and Hot Dip Galvanising foundation structure for UG termination for 110KV line

110 KV outdoor Termination kit for 1 x 630 Sq.mm Aluminium XLPE UG Cable with all accessories with GI Termination structure and Hot Dip Galvanising grouting bolt

Single phase link box without CCPU

Single phase link box with CCPU

1C x 240Sq.mm Copper Sheath bonding cable for 110KV XLPE UG Cable

Flexible copper tape/rope, flexible braided copper for interlinking panel earthing and for providing connectivity wherever necessary/ other purpose as directed by field engineer

Description of Work / Item(s)

Amount

500 MVA, 3 Phase, 50Hz, 400/230-33KV, YNaod11 Auto Transformer with RTCC Panel and all accessories, Terminal connectors and clamps and with Neutral CT for enabling REF protection and using PLC to control Fans, Pumps and OLTC with RTCC and must be compatible with the SAS. System equipments for Nitrogen Injection Fire Protection System including FRLS cables, accessories, Heat Sensor for Fire Detectors and Spare Nitrogen Cylinder Regulator Assembly.

200 MVA,3 phase, 50Hz, 400/110-33 KV YNaod11 Auto Transformer with RTCC Panel and all accessories, Terminal connectors and clamps and with Neutral CT for enabling REF protection and using PLC to control Fans, Pumps and OLTC with RTCC and must be compatible with the SAS System equipments for Nitrogen Injection Fire Protection Systems including FRLS cbles, accessories, Heat Sensor for Fire Detectors Spare Nitrogen Cylinder Regulator Assembly

125 MVAR,3 phase,50Hz 400KV Bus reactor(Without NGR) with Neutral CT with associated equipments, Terminal connectors and clamps. System equipments for Nitrogen Injection Fire Protection Systems including FRLS cables, accessories, Heat Sensor for Fire Detectors, Spare Nitrogen Cylinder Regulator Assembly.

420 KV, 3150 A, 63 KA, SF 6 Circiut Breaker 220 V DC Control (without pre insertion resister) with Control switching device. (CSD) and all accessories, Terminal connectors and clamps including mounting structure G I Bolt and standing lader arrangements.

420 KV, 3150 A, 63 KA, SF 6 Circiut Breaker 220 V DC Control with pre insertion resister and all accessories, with Terminal connectors and clamps including mounting structure G I Bolt and standing lader arrangements. (4 Nos for PGCIL Bay)

245 KV, 2000 A, 50 KA, SF 6 Circiut Breaker 220 V DC Control with all accessories, with Terminal connectors and clamps including mounting structure G I Bolt and standing lader arrangements.

145 KV, 2000 A, 40 KA, SF 6 Circiut Breaker 220 V DC Control with all accessories, with Terminal connectors and clamps including mounting structure G I Bolt and standing lader arrangements.

420 KV, 3000 A, 63 KA, 5 Core Single phase Outdoor Current Transformer (Ratio 3000-2000-1000-/1A) with Terminal Connectors and clamps, G I Tubular Mounting Structure , Hot Dip Galvanising Steel Bolt (1 No.Junction Box for 3Nos CT's)

245 KV, 2000 A, 50 KA, 5 Core Single phase Outdoor Current Transformer (Ratio 2000-1200-800-/1A) with Terminal Connectors and clamps.G I Tubular Mounting Structure, Hot Dip Galvanising Steel Bolt (1 No.Junction Box for 3Nos CT's)

145 KV, 1200 A, 40 KA, 5 Core Single phase Outdoor Current Transformer (Ratio 2000-1200-800/1A) with Terminal Connectors and clamps, G I Tubular Mounting Structure, Hot Dip Galvanising Steel Bolt (1 No.Junction Box for 3Nos CT's)

420 KV, 200 VA, 400KV/√3/110 V /√3, Capacitive Voltage Transformer with Terminal Connectors and clamps, G I Tubular Mounting Structure , Hot Dip Galvanising Steel Bolt (1 No.Junction Box for 3Nos CVT's)

245 KV, 200 VA, 230KV/√3/110 V /√3, 50KA Line Voltage Transformer with Terminal Connectors and clamps G I Tubular Mounting Structure Hot Dip Galvanising Steel Bolt (1 No.Junction Box for 3Nos LVT)

145 KV, 200 VA, 110KV/√3/110 V /√3, Line VoltageTransformer with Terminal Connectors and clamps,G I Tubular Mounting Structure, Hot Dip Galvanising Steel Bolt (1 No.Junction Box for each LVT)

245 KV, 200 VA, 50KA 230KV/√3/110 V /√3, Potential Transformer with Terminal Connectors and clamps,G I Tubular Mounting Structure, Hot Dip Galvanising Steel Bolt (1 No.Junction Box for 3Nos PT)

145 KV, 200 VA, 110KV/√3/110 V /√3, Potential Transformer with Terminal Connectors and clamps, G I Tubular Mounting Structure, Hot Dip Galvanising Steel Bolt (1 No.Junction Box for 3Nos PT)

390 KV, 10KA Station Type Lightning Arrestor with surge Monitor, Terminal connectors and clamps and all accessories, G I Tubular Mounting Structure, Hot Dip Galvanising Steel Bolt

216 KV, 10KA Station Type Lightning Arrestor with surge Monitor, Terminal connectors and clamps and all accessories G I Tubular Mounting Structure Hot Dip Galvanising Steel Bolt

96 KV, 10KA Station Type Lightning Arrestor with surge Monitor, Terminal onnectors and clamps and all accessories G I Tubular Mounting Structure Hot Dip Galvanising Steel Bolt

420 KV, 3150 A, 63 KA, Horizontal double Break with Single earth switch- 440 V AC Motor operated with 220 V DC Control, 3 Nos MOMD for Main Blade and 3 Nos MOMD for earth switch with G I Tubular Mounting Structure , Hot Dip Galvanising Steel Bolt with Solid core insulators and Terminal connectors and clamps.

420 KV, 3150 A, 63 KA, Horizontal double Break with Double earth switch- 440 V AC Motor operated with 220 V DC Control, 3 Nos MOMD for Main Blade and 6 Nos MOMD for earth switch including G I Tubular Mounting Structure Hot Dip Galvanising Steel Bolt with Solid core insulators and Terminal connectors and clamps.

245 KV, 2000 A, 50 KA, Horizontal Centre Rotating Double Break with Single earth switch- 440 V AC Motor operated with 220 V DC Control, 1 No MOMD for Main Blade and 1 No MOMD for earth switch with G I Tubular Mounting Structure Hot Dip Galvanising Steel Bolt with Solid core insulators and Terminal connectors and clamps.

245 KV, 2000 A, 50 KA, Horizontal Centre Rotating Double Break with out earth switch- 440 V AC Motor operated with 220 V DC Control, 1 No MOMD for Main Blade with G I Tubular Mounting Structure Hot Dip Galvanising Steel Bolt with Solid core insulators and Terminal connectors and clamps.

145 KV, 2000 A, 40 KA, Horizontal Centre Rotating Double Break with Single earth switch- 440 V AC Motor operated with 220 V DC Control, 1 No MOMD for Main Blade and 1 No MOMD for earth switch including G I Tubular Mounting Structure , Hot Dip Galvanising Steel Bolt with Solid core insulators and Terminal connectors and clamps.

145 KV,2000 A, 40 KA, Horizontal Centre Rotating Double Break with out earth switch- 440 V AC Motor operated with 220 V DC Control, 1 No MOMD for Main Blade. including G I Tubular Mounting Structure Hot Dip Galvanising Steel Bolt with Solid core insulators and Terminal connectors and clamps.

420 KV, 3150 A, 63 KA, Vertical Operated Single Break Bus Earth switch- 440 V AC Motor operated with 220 V DC Control, 1 No MOMD for earth switch. including G I Tubular Mounting Structure Hot Dip Galvanising Steel Bolt with Solid core insulators and Terminal connectors and clamps.

245 KV, 2000 A, 50 KA, Vertical Operated Single Break Bus Earth switch- 440 V AC Motor operated with 220 V DC Control, 1 No MOMD for earth switch,including G I Tubular Mounting Structure Hot Dip Galvanising Steel Bolt with Solid core insulators and Terminal connectors and clamps.

145 KV,2000 A, 40 KA, Vertical Operated Single Break Bus Earth switch- 440 V AC Motor operated with 220 V DC Control,1 No MOMD for earth switch including G I Tubular Mounting Structure Hot Dip Galvanising Steel Bolt with Solid core insulators and Terminal connectors and clamps.

420 KV, Solid core Insulator with Corona ring G I Tubular Mounting Structure with Hot Dip Galvanising Steel Bolt with Terminal connectors and seating clamps.

245 KV, Solid core Insulator G I Tubular Mounting Structure with Hot Dip Galvanising Steel Bolt with Terminal connectors and seating clamps.

145 KV, Solid core Insulator G I Tubular Mounting Structure with Hot Dip Galvanising Steel Bolt with Terminal connectors and seating clamps

LT 433 V, AC Distribution Board with MCB's with LT Circuit Breaker Control and Change over switch for 400 KV SS

800A AC change over switch

220V DC Distribution board with MCBs, with one control Panel each for change over arrangement of Charger supply

200 A DC change over switch with panel (1 panel for 4 Switches)

Out door 433 V AC Distribution Cubic with 20 Nos, 32 A MCB's and 10 Nos, 16 A MCB's, with weather proof stainless steel cabinet for all equipmnets/ Isolators.

Outdoor 433 V AC Distribution Cubic with 1 No, 200 A MCB's and 10 Nos, 32 A MCB's, with weather proof stainless steel cabinet for ICT's and Reactors.

Outdoor 220 V DC Distribution Cubic with 25 Nos, 32 A MCB's with weather proof stainless steel cabinet for all equipmnets/ Isolators/ICT's and Reactors.

Outdoor 433 V AC Distribution Cubic with 10 Nos, 32 A MCB's with weather proof stainless steel cabinet for LLM .

220 V DC, 400 AH, battery complete set with Single tier teak wood stand, insulator and terminal connectors, Hydrometer Room thermometer, Multimeter and with all accessories

220 V, 80 A Float / Boost Battery Charger with Change over switch.

220 V DC, 300 AH, battery complete set with Single tier teak wood stand, insulator and terminal connectors, Hydrometer Room thermometer, Multimeter and with all accessories

220 V, 60 A Float / Boost Battery Charger with Change over switch.

DCDB with MCB's, neccessary cabling for 48 V DC Charger and 48 V DC Batteries

48 V DC, 400 AH, battery complete set with Single tier teak wood stand, insulator and terminal connectors, Hydrometer Room thermometer, Multimeter and with all accessories

48 V, 120 A Float / Boost Battery Charger with Change over switch.

Control and Protection Panel for 400KV Line/Feeders

Control and Protection Panel for 400KV Tie breaker bay

Control and Protection Panel for 400KV/230KV Inter Connecting Transformers

Control and Protection Panel for 400KV/110KV Inter Connecting Transformers

Control and Protection Panel for 400KV Bus Reactor

400KV Bus Bar Protection Panel

Synchronising cum Islanding Panel for 400KV bays

Control and Protection Panel for 230KV Line/Feeder

Control and Protection Panel for 230KV Transfer Bus Coupler bay

230KV Bus Bar Protection Panel

Synchronising cum Islanding Panel for 230KV bays

Control and Protection Panel for 110KV Line/Feeder

Control and Protection Panel for 110KV Transfer Bus Coupler bay

110KV Bus Bar Protection Panel

Synchronising cum Islanding Panel for 110KV bays

Sub station Automation system for 400/230-110KV AIS for 42 bays (8 Nos 400KV dia, 9 Nos 230KV bays, 12 Nos 110KV bays)

DFR (digital fault recorder) system with PMU (phasor measurement unit) complete with all devices for 6 Nos 400KV lines and DFR workstation

Outdoor armoured 24core FO cable for connectivity of all Kiosks with the SAS LAN and with station Auxilliary systems including all FODP's

Digital Protection Coupler (Including Remote end stations).

Optic Line Terminal equipments(OLTES), STM 16/4 optical interface cards and STM 4/1 optical interface cards with cross connect Multiplexer.

EPAX for PLCC system for 48 Subscripers and 16 Trunks

Telephone Cable (4 Pair 5 Nos, each with 500 Mtrs.)

FODB (48 Fibre capacity) as per standards

LED Bulb (20Watts of Higher) for emergency lighting of Control Room)

Armoured Copper Control Cable with Al. Tag for identification of both ends, Glands, Lugs for termination identification of ferules and Copper sockets for wiring termination with necessary PVC sleeves, cable tie etc.,

Armoured Copper Control cable 8CX 4 Sq.mm

Armoured Copper Control Cable 4CX4 Sq.mm

Armoured Copper Control Cable 4CX16 Sq.mm

Armoured Copper Control Cable 28 C X 2.5mm2

Armoured Copper Control Cable 14 C X 2.5mm2

Armoured Copper Control Cable 20C X 2.5mm2

Armoure Copper Control Cable 4C X 2.5mm2

Armoured Copper Control Cable 8CX 2.5mm2

Armoured Copper Control Cable 2CX2.5mm2

LT Power cable 4C x 120 sq.mm AL

LT Power cable 4C x 240 sq.mm AL

LT Power cable 4C x 25 sq.mm AL

LT Power cable 2C x 16 sq.mm AL

Armoured Fibre Optic Cable 48 Core (For communication equipment) with Gland and End connectors

Armoured Copper Cable 2X35mm2

11 KV , 160 KN Anti fog Strain Disc Insulator

11 KV ,120 KN Anti fog Strain Disc Insulator

100mm Dia Aluminium Bus Bar with welding sleeve

75mm Dia Aluminium Bus Bar with welding sleeve

ACSR Moose Conductor

GI Ladder type Cable Tray 2.5m L, 0.3m W and 2mm thickness with coupling plate and bolt nuts

GI Ladder type Cable Tray 2.5m L, 0.45m W and 2mm thickness with coupling plate and bolt nuts

GI Ladder type Cable Tray 2.5m L, 0.60m W and 2mm thickness with coupling plate and bolt nuts

Steel Bolt and Nut,Spring Washer and Flat washer of reputed make of various size for use to all power connectors

T clamp to suit Twin MOOSE ACSR on all ways with 450mm sub-conductor spacing

T clamp to suit Twin MOOSE on main ways with 450mm sub-conductor spacing and single MOOSE on branch way

T clamp to suit Twin Moose on main way with 450mm sub-conductor spacing and Twin Moose ACSR on branch way with 450mm sub-conductor spacing

T clamp to suit 4" IPS Al. tube on Main way and Quad MOOSE on Branch way with 450mm sub-conductor spacing

T clamp to suit 4" IPS Al. tube on Main way and Twin MOOSE on Branch way with 450mm sub-conductor spacing

Corona Bell to suit 4" IPS Al. tube

420kV Bolted type Double Tension String assembly suitable for 25 no.Anti fog type 160kN Disc Insulators per string and its associated hardware accessories with turn buckle, with double anchoring, corona ring, and tension clamp set suitable for Twin MOOSE ACSR bundle with 450mm Sub conductor spacing.

420kV Bolted type Double Tension String assembly suitable for 25 no.Anti fog type 160kN Disc Insulators per string and its associated hardware accessories without turn buckle, with double anchoring, corona ring, and tension clamp set suitable for Twin MOOSE ACSR bundle with 450mm Sub conductor spacing.

420kV Bolted type Single Suspension String assembly suitable for 25 no. Anti fog type disc insulator of 120kN, with Drop Clamp and its associated hardware accessories suitable for Twin MOOSE ACSR with 450mm Sub Conductor spacing.

420kV Bolted type Single Suspension String assembly suitable for 25 no. Anti fog type disc insulator of 120kN, with Drop Clamp and its associated hardware accessories suitable for Quad MOOSE ACSR with 450mm Sub Conductor spacing.

420kV Bolted type Double Tension String assembly suitable for 25 no. Anti fog type 160kN Disc Insulators per string and its associated hardware accessories with turn buckle, with double anchoring, corona ring, arcing horn and tension clamp set suitable for 4 x MOOSE ACSR bundle with 450mm Sub conductor spacing.

420kV Bolted type Double Tension String assembly suitable for 25 no. Anti fog type 160kN Disc Insulators per string and its associated hardware accessories without turn buckle, with double anchoring, corona ring, arcing horn and tension clamp set suitable for 4 x MOOSE ACSR bundle with 450mm Sub conductor spacing.

Rigid Spacers to suit 2 x MOOSE ACSR Conductor with 450mm sub conductor spacing.

Rigid Spacers to suit 4 x MOOSE ACSR Conductor with 450mm sub conductor spacing.

T clamp to suit 2 x MOOSE ACSR on all ways with 225mm sub conductor spacing

T clamp to suit 2 x MOOSE ACSR on main way with 225 sub-conductor spacing and 2 x MOOSE ACSR on branch way with 225mm sub-conductor spacing.

T clamp to suit 2 x MOOSE on main way with 225mm sub-conductor spacing and 1 x MOOSE ACSR on branch way.

T clamp to suit 3" IPS Al. tube on Main way and 2 x MOOSE ACSR on Branch way with 225mm sub-conductor spacing

T clamp to suit 4"IPS Al tube on main way and 2 x MOOSE ACSR on branch way with 225mm sub-conductor spacing.

T clamp to suit 3" IPS Al. tube on Main way and 2 x MOOSE ACSR on Branch way with 225mm sub-conductor spacing

Terminal Connector on 230KV Underhung post insulator to suit 2 x MOOSE ACSR with 225mm sub-conductor spacing-Through type

Terminal Connector on 230KV Underhung post insulator to suit 4 x MOOSE ACSR with 225mm sub-conductor spacing-Through type

230kV Bolted type Double Tension String assembly with double anchoring suitable for 15 no. anti fog type 160kN Disc Insulators per string and its associated hardware accessories with turn buckle, tension clamp set suitable for 2 x MOOSE ACSR bundle with 225mm Sub conductor spacing.

230kV Bolted type Double Tension String assembly with double anchoring suitable for 15 no. anti fog type 160kN Disc Insulators per string and its associated hardware accessories without turn buckle, tension clamp set suitable for 2 x MOOSE ACSR bundle with 225mm Sub conductor spacing.

230Kv Underhung Insulator (8KN) for suspension for connecting 2 x MOOSE ACSR with 225mm sub conductor spacing

230kV Bolted type Double Tension String assembly with double anchoring suitable for 8 no. anti fog type 160kN Disc Insulators per string and its associated hardware accessories tension clamp set suitable for 2 x MOOSE ACSR bundle with 225mm Sub conductor spacing on both side insulator hardware.

230kV Bolted type Double Tension String assembly suitable with double anchoring for 15 no. anti fog type 160kN Disc Insulators per string and its associated hardware accessories with turn buckle tension clamp set suitable for 4 x MOOSE ACSR bundle with 225mm Sub conductor spacing

230kV Bolted type Double Tension String assembly suitable with double anchoring for 15 no. anti fog type 160kN Disc Insulators per string and its associated hardware accessories without turn buckle tension clamp set suitable for 4 x MOOSE ACSR bundle with 225mm Sub conductor spacing

230Kv Underhung Insulator (8KN) for suspension for connecting 4 x MOOSE ACSR with 225mm sub conductor spacing

Rigid Spacers to suit 4 x MOOSE ACSR Conductor with 225mm subconductor spacing.

Rigid Spacers to suit 2 x MOOSE ACSR Conductor with 225mm subconductor spacing.

T clamp to suit 2 x MOOSE ACSR on all ways with 225mm sub conductor spacing

T clamp to suit 2 x MOOSE ACSR on main way with 225 sub-conductor spacing and 2 x MOOSE ACSR on branch way with 225mm sub-conductor spacing.

T clamp to suit 2 x MOOSE on main way with 225mm sub-conductor spacing and 1 x MOOSE ACSR on branch way.

T clamp to suit 3" IPS Al. tube on Main way and 2 x MOOSE ACSR on Branch way with 225mm sub-conductor spacing

T clamp to suit 4"IPS Al tube on main way and 2 x MOOSE ACSR on branch way with 225mm sub-conductor spacing.

Corona Bell to suit 3" IPS Al. tube

110kV Bolted type Double Tension String assembly with double anchoring suitable for 8 noS. anti fog type 160kN Disc Insulators per string and its associated hardware accessories with turn buckle, tension clamp set suitable for 2 x MOOSE ACSR bundle with 225mm Sub conductor spacing.

110kV Bolted type Double Tension String assembly with double anchoring suitable for 8 nos. anti fog type 160kN Disc Insulators per string and its associated hardware accessories without turn buckle, tension clamp set suitable for 2 x MOOSE ACSR bundle with 225mm Sub conductor spacing.

110Kv Underhung Insulator (8KN) for suspension for connecting 2 x MOOSE ACSR with 225mm sub conductor spacing

110kV Bolted type Double Tension String assembly with single anchoring suitable for 8 no. anti fog type 160kN Disc Insulators per string and its associated hardware accessories tension clamp set suitable for 2 x MOOSE ACSR bundle with 225mm Sub conductor spacing on both side insulator hardware.

110kV Bolted type Double Tension String assembly with double anchoring suitable for 8 nos. anti fog type 160kN Disc Insulators per string and its associated hardware accessories with turn buckle tension clamp set suitable for 4 x MOOSE ACSR bundle with 225mm Sub conductor spacing

110kV Bolted type Double Tension String assembly with double anchoring suitable for 8 nos. anti fog type 160kN Disc Insulators per string and its associated hardware accessories without turn buckle tension clamp set suitable for 4 x MOOSE ACSR bundle with 225mm Sub conductor spacing

110Kv Underhung Insulator (6KN) for suspension for connecting 4 x MOOSE ACSR with 225mm sub conductor spacing

Rigid Spacers to suit 4 x MOOSE ACSR Conductor with 225mm subconductor spacing.

Rigid Spacers to suit 2 x MOOSE ACSR Conductor with 225mm subconductor spacing.

Fired 'C' Type Boltless wedge connectors to suit moose conductor to moose conductor connections.

Fired 'C' Type Boltless wedge connectors to suit moose conductor to Equipment connections.

230KV Bolted type suspension fitting suitable for Quad moose

230 KV Bolted type suspension fitting suitable for Twin moose

110 KV Bolted type suspension fitting suitable for Quad moose

110 KV Bolted type suspension fitting suitable for Twin moose

420kV Single Suspension String assembly suitable for 25 no.Anti fog type disc insulator of 120kN, with Through Clamp and its associated hardware accessories suitable for Twin MOOSE ACSR with 450mm Sub Conductor spacing.

T clamp for single moose to single moose for 400KV

Free end clamp 4" Al. bus (expansion type)

Free end clamp 3" Al. bus (Rigid/sliding)

Free end clamp 3" Al. bus (expansion type)

Fire protection alaram system for Main control room building, Cable gallery and for all the Kiosk buildings with smoke detectors

MS Rod 40mm for Earth Mat,Auxiliary earth mat and Earth Electode, MS Flat 75X12mm for earth raiser for earthing system, Earth Spike with standard GI Pipe/GI Round rod 40mm dia, Height 3000mm,Provision for sharp edge at top,Provision for earth connections toMS Flat 65X10mm/GI Earth wire 7/3.55, 3 run each and painting as required by the field engineer.

Maintanance free earthing system consisting of one copper bonded Earthing Electrode 17.20mm dia 3050mm length (10 feet) length with 250micron copper bonding along with 2 bags of (11.3kg each) of Ground enhancement mwterial (GEM 25A) and 50x50x25mm size clmap, 65x10mm, 200mm length Flat for terminal connector

250KVA Diesel Generator Set with all accessories with provision of Automatic Main Failure(AMF) Panel for emergency AC supply

11KV/433V, 500KVA Station transformer (including structure) with 4 way FRP pillar box and with suitably rated SCADA ready RMU (RRLL configuration) with FRTU including suitably rated HT cable between RMU to station transformer and termination kit and LT supply cable, accessories and arrangements, FO communication cable with necessary media converters for integrating FRTU in RMU with SAS

Outdoor yard illumination for switch yard, LLM tower, street lighting with tubular pole as per specification and design, including all materials and consumables using LED technology for arriving LUX level of 30.

AC FRP junction box

DC FRP interlock junction box

AC Distribution Panel for Kiosk

DC Distribution Panel for Kiosk

Visual monitoring system for monitoring complete switchyard and control room for day and night for monitoring of the entire switch yard area and for security of premises

Supply of complete packaged AC unit including duct and accessories with 50% redundancy duly considering the heat loads for entire control room and office room

Environmental control unit which comprise of 2 Nos. two tonne capacity and type split A/C Air conditioners (1 Main + 1 standby) working inconjunction through a microprocessor based controller for desired operation.Each unit should have two compressors etc complete as per standard specification.

LC/Key Board/Earth Mat &Earth Electrode layout of size 3000 mm X 1500 mm out of 75X25 mm Alu. Frame embedded with 12mm pre laminated wood particle board using screw on rear two Nos plain class of 5 mm thick fixed with metal roller moving on Aluminium Channel with on front with locking arrangement LG class piece should be fastended on the glass shutters for opening and closingwall clamp made out of 6mm MS plate should be provided on as per drawing along with hook for key with token and as directed by the field engineer including cost of all materials.

110 KV, 1 x 630 Sq.mm Aluminium XLPE UG Cable

110 KV, 10 KA Station Type Lightning Arrestor with surge Monitor, Terminal connectors and all accessories Including G I Tubular Mounting Structure and Hot Dip Galvanising foundation structure for UG termination for 110KV line

110 KV outdoor Termination kit for 1 x 630 Sq.mm Aluminium XLPE UG Cable with all accessories with GI Termination structure and Hot Dip Galvanising grouting bolt

Single phase link box without CCPU

Single phase link box with CCPU

1C x 240Sq.mm Copper Sheath bonding cable for 110KV XLPE UG Cable

LARSEN AND TOUBRO LIMITED

TRANSGLOBAL POWER LIMITED

BGR Energy Systems Limited

TRANSGLOBAL POWER LIMITED

TRANSGLOBAL POWER LIMITED

LARSEN AND TOUBRO LIMITED

BGR Energy Systems Limited

TRANSGLOBAL POWER LIMITED