Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.6 LAccepted-Finance | L1 | Accepted-Finance Credentials are satisfactory |
Tender Value
₹4.6 L
EMD Value
₹9,300
Closing Date
11 Sept 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EE Civil
BSNL Civil Division II Hyderabad
Addition and Alternation in the 2nd floor in the Office of Special DGT at CTO,Secunderabad
2023_BSNL_166631_1
40 / BCDH II / 2023 24
Open Tender
Civil Works
Item Rate
60 days
Secunderabad Hydereabad
Please refer Tender documents.
3 documents required · 3 mandatory
₹590
AO Cash O/o the PGM-HTD
₹9,300
10 Oct 2023
5 Sept 2023
12 Sept 2023
5 Sept 2023
11 Sept 2023
5 Sept 2023
Amount
1) Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.
a) For thickness of tiles 10 mm to 25 mm
2) Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.
3) Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
4) Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
a) For fixed portion
i) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)
b) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately).
i) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)
5) Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.
a) Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side.
6) Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
a) With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm)
b) With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)
7) Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. complete as per direction of Engineer-in-charge
a) Polyester powder coated minimum thickness 50 micron aluminium.
8) Providing and fixing 100 mm vertical venetian blinds of approved shade, colour, dust guard treated fabric along with all hardware etc., as per manufacturer's specifications etc., of VISTA LEVELOR make or equivalent all complete as per the direction of the Engineer-in -charge (outer to outer area will be measured for payment. Deduction will be made for opeinings of area exceeding 0.20Sqm)
9) Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @3.3kg/sqm including pointing the joints with white cement and matching pigments etc., complete.
10) Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :
a) Water thinnable cement primer.
11) Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:
a) Two or more coats on new work.
12) Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
a) Two or more coats on new work.
13) Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
14) Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
15) Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge.
a) With cement mortar 1:4 (1 cement : 4 fine sand).
16) Providing and fixing 12 mm thick fine fissured square edged mineral fibre board false ceiling tiles of size 600x600mm of approved texture, design and patterns in true horizontal level suspended on interlocking metal powder coated T-Grid sleek frame work, connected to ceiling with GI wire and anchor fastener at every junction and also including cost of making openings for light fittings, grills, diffusers,cut outs made with frame of perimeter channels suitably fixed all complete as per direction of Engineer-in-charge.
17) Removing of the existing Superil 84G False Ceiling strips including its frame work (Rate includes shifting of the removed strips and its connected frame material from the place of work and stacking them at stores)
18) Dismantling anodized aluminium partitons, doors and other frames including proper numbering, laoding and unloading and placing at the required place in the building as directed by the Engineer-in-charge .( The rate includes the rectifying the damages made in the floors/masonry and concrete surfaces as directed by the Engineer-in-charge)
19) Fixing aluminium partitions with available aluminium sections, prelaminated particle board or glass panes etc., including providing new necessary screws, rubber gasket, cleats ,etc., as per the directions of the Engineer-in-charge.
20) 1. Dismantling by dismembering the existing conference table of size (8.40m x 1.80m out side to out side) at SDGT,CTO,2nd Floor, Conference Hall. 2. Assembling of dismantled conference table with Suitable approved lamination for matching . Any incidental new materials such as screws, nuts & bolts, nails, gum, fevicol, edge lamination matching the existing lamination and existing lipping etc shall be providing by the agency. 3. The rate includes all and nothing extra shall be paid on any account over and above the quoted rate. All complete etc as per the directions of the Engineer-in-charge.
21) Demolishing of Existing Damaged Portion of Wall Panelling made of 12 mm thick Pre-laminated partical board fitted with frame work and same may be Disposal of unservicaeble material beyond the Compound, rate includes all Operations,as per the directions of Engineer.in.charge
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .