Renovation work of office building of hydromeoteorology sub div. No.5. and ground water division at Pachpedi, Jabalpur (3rd Call)

RENOVATION WORK OF OFFICE BUILDING OF HYDROMETEOROLOGY SUB DIV. NO.5. AND GROUND WATER DIVISION AT PACHPEDI, JABALPUR (3rd Call)

Grading roof for water proofing treatment with cement concerete 1:2:4 (1 cement, 2 coarse sand 3 grades stone agreae 20mm nominal size. etc complete in all respect as per specifications, drawings and as directed by the Engineer-in-charge.

Kota Stone slab 20 mm thick in riser of step, Skirtting, dado & pillers laid in 12 mm (av) thick cement morter 1:3 & jointed with gray cement slurry mixed pigment to match the shate of the slab i/c rubbing & polishing etc complete in all respect as per specifications, drawings and as directed by the Engineer-in-charge.

Dismentling doors windows and clerestory windows (Steel or wood) shutter including choukhat architrave, holdfast etc complete and stacking within 50 meter lead of area 3 sq meters and below. ((Door (D))

Door (D3)

window

Providing and fixing unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type B including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes for working pressure of 4 kg/sqcm. etc complete in all respect as per specifications, drawings and as directed by the Engineer-in-charge. ( 12.32.1) (75mm diameter (minimum wall thickness 1.8mm)

110 mm diameter (minimum wall thickness 2.2mm)

Providing and fixing unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. (12.33.1.1) Coupler (a) 75 mm

Single tee with door (a) 75x75x75mm

(b) 110x110x110mm

Single tee without door (a) 75x75x75mm

(b) 110x110x110mm

Bend 87.50 (a) 75 mm bend

(b) 110mm bend)

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron P or S trap, uPVC P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : etc complete in all respect as per specifications, drawings and as directed by the Engineer-in-charge.

Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete including painting of fittings and cutting and making good the walls and floors etc. wherever required : etc complete in all respect as per specifications, drawings and as directed by the Engineer-in-charge.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. etc complete in all respect as per specifications, drawings and as directed by the Engineer-in-charge. (18.7.1) 15 mm nominal outer dia .Pipes.

25 mm nominal outer dia .Pipes.

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : (18.32.1) 25 mm nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : (18.35.3) 25 mm nominal bore

Providing and fixing PTMT bib cock of approved quality and colour. (18.65.1) 15mm nominal bore, 86 mm long. Weighing not less than 88 gms.

Providing and fixing PTMT stop cock of approved quality and colour. 15 mm nominal bore, 86mm long. Weighing not less than 88 gms.

Providing and fixing PTMT pillar cock of approved quality and colour . 15mm nominal bore, 107mm long.Weighing not less than 110 gms.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : (21.1.1.1) (a) For fixed portion, Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15)

For shutters of doors, windows and ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15) etc complete in all respect as per specifications, drawings and as directed by the Engineer-in-charge. (for door frame)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) : etc complete in all respect as per specifications, drawings and as directed by the Engineer-in-charge. With float glass panes of 4.0 mm thickness

For shutters of doors, windows and ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15) etc complete in all respect as per specifications, drawings and as directed by the Engineer-in-charge.

15 mm cement plaster on the rough side of single or half brick wall of mix : etc complete in all respect as per specifications, drawings and as directed by the Engineer-in-charge. (1:4 (1 cement : 4 sand)

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: etc complete in all respect as per specifications, drawings and as directed by the Engineer-in-charge. (14.5.1) Float glass panes of thickness 4 mm

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on old work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. etc complete in all respect as per specifications, drawings and as directed by the Engineer-in-charge.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : etc complete in all respect as per specifications, drawings and as directed by the Engineer-in-charge.

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc complete in all respect as per specifications, drawings and as directed by the Engineer-in-charge.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. etc complete in all respect as per specifications, drawings and as directed by the Engineer-in-charge.