WC-4644 Renovation of 7th floor wing B of Transit Camp in RHQ Building, POWERGRID, Secunderabad

ATTACHMENTS General guidelines for filling up the Attachments

Renovation of B-Wing of Transit Camp at 7th Floor, RHQ Building, POWERGRID, Secunderabad

Specification No: SR-I/C&M/WC-4644/2026/RFx: 5002005251 (SR1/NT/W-CIVIL/DOM/B00/26/04733)

1 Fill up only green shaded cells in the relevent attachments.

2 Attachments 3, 4, 5, 6, 7, 8, 9, 11, 12,13, 14, 15 and Bid Form for 1st Envelope are included here.

3 Attachment 1 Bid Security : To be submitted as per proforma provided in the Bidding Document.

4 Attachment 2 Power of Attorney : No specific format is provided by POWERGRID. Bidder may use their own format.

8 Attachment 20: Unequivocal consent of the proposed Associate(s) for the purpose of executing the 'Second Contract' and /or 'Third Contract' as an independent Contractor (applicable to foreign bidder) : No specific format is provided by POWERGRID. Bidder may use their own format.

9 Attachment 21: Capacity, Capability and Experience of Proposed Associate(s) (applicable for foreign bidder) : No specific format is provided by POWERGRID. Bidder may use their own format.

पावर ग्रिड कारपोरेशन ऑफ इण्डिया लिमिटेड

(भारत सरकार का उद्यम)

Power Grid Corporation of India Limited

(A Government of India Enterprises)

Renovation of B-Wing of Transit Camp at 7th Floor, RHQ Building, POWERGRID, Secunderabad

Specification No: SR-I/C&M/WC-4644/2026/RFx: 5002005251 (SR1/NT/W-CIVIL/DOM/B00/26/04733)

Enter the details of the bidder below:

Specify type of Bidder Sole Bidder

Name of the Bidder

Address of Registered Office

Contact Details:

Specification No: SR-I/C&M/WC-4644/2026/RFx: 5002005251 (SR1/NT/W-CIVIL/DOM/B00/26/04733) ATTACHMENT-3 (QR)

Renovation of B-Wing of Transit Camp at 7th Floor, RHQ Building, POWERGRID, Secunderabad

(Qualifying Requirement Data)

Bidder’s Name and Address (Bidder) : To

Name: 0 Sr.GM(C&M)

Address: 0 Contracts & Materials Department

0 Power Grid Corporation of India Ltd.,

0 Kavadiguda Main Road,

Secunderabad - 500 080

In support of the Qualification Requirements (QR) for bidders, stipulated in Section-III of the Bidding Documents, we furnish herewith our QR data/details/documents etc. along with other information, as follows (The QR stipulations have been reproduced in italics for ready reference, however, in case of any discrepancy the QR as given in Section-III shall prevail).

We are furnishing the following details/document in support of Qualifying requirement for the subject package.

A Attached copies of original documents defining :

a) The constitution or legal status; #REF!

b) The principal place of business; #REF!

c) The place of incorporation (for bidders who are corporations); or the place of registration and the nationality of the Owners (for applicants who are partnerships or individually-owned firms).

B Attached original & copies of the following documents :

a) Written power of attorney of the signatory of the Bid to commit the bidder.

1.0 GENERAL INFORMATION

Bidder is required to provide general information as per the following format.

S No. Particulars For Individual Firm

1 Name of the Firm

2 Head Office/ Registered Office Address

5 Contact Person

6 Place of Incorporation/ Registration

7 Year of Incorporation/ Registration

8 Nationality of the Agency

[Necessary documents to eatablish legal status of the bidder should be uploaded with the bid]

2.0 TECHNICAL REQUIREMENTS {Reference Section-III}

2.1 Bidder who wishes to participate in the tender should have successfully completed Civil works for any State/Central Govt. departments/ undertakings/ private organizations during last Five years as on the originally scheduled date of bid opening: One similar work of value not less than Rs. 67.18 Lakhs excl. GST or Two similar works, each of value not less than Rs. 41.98 Lakhs excl. GST or Three similar works, each of value not less than Rs. 33.59 Lakhs excl. GST

(a) Following documents shall be submitted by the bidder as evidence of above: (i) Completion certificate(s) from the client for the work inter alia indicating final executed amount and date of completion or any other document, authenticated by the client, containing relevant information to conclusively establish that the bidder has completed the requisite work(s) as per the requirement specified above. (ii) The copy of corresponding work order(s) shall also be submitted. Note: Contracts involving only excavation/earth work or only painting works will not be considered for technical experience.

2.2 Format for the Bidder for indicating its technical experience (in support of meeting the requirement of para 2.1 above is to be furnished, as applicable, using this format]

Name of the Bidder

1 Name of Contract:

2 Contract Reference No. & Date of Award

3 Name and Address of the Employer/Utility by whom the Contract was awarded

4 Scope of work executed under the above contract

5 Date of Completion of works under the Contract

6 Total Value of work executed (Rs.)

7 Details of documents furnished in the Bid, in support of the aforesaid data/details/informations

Name of the Bidder

1 Name of Contract:

2 Contract Reference No. & Date of Award

3 Name and Address of the Employer/Utility by whom the Contract was awarded

4 Scope of work executed under the above contract

5 Date of Completion of works under the Contract

6 Total Value of work executed (Rs.)

7 Details of documents furnished in the Bid, in support of the aforesaid data/details/informations

Name of the Bidder

1 Name of Contract:

2 Contract Reference No. & Date of Award

3 Name and Address of the Employer/Utility by whom the Contract was awarded

4 Scope of work executed under the above contract

5 Date of Completion of works under the Contract

6 Total Value of work executed (Rs.)

7 Details of documents furnished in the Bid, in support of the aforesaid data/details/informations

3.0 FINANCIAL REQUIREMENTS {Reference Section-III}

a) (i) The Minimum Annual Average Turnover* (MAAT) of the bidder for the best three (3) financial years out of the preceding five (5) financial years shall be: Rs. 125.95 Lakhs * Note- “Annual gross revenue from operation/gross operating income as incorporated in the profit &loss account excluding other income”.

Note: In case the bidder is a holding company, the Financial Position criteria referred to in clause 3.0 above shall be that of holding company only (i.e. excluding its subsidiary / group companies). In case bidder is a subsidiary of a holding company, the Financial Position criteria referred to in clause 3.0 above shall be that of subsidiary company only (i.e. excluding its holding company).

RELAXATION FOR MSME BIDDERS MSMEsˆ / START Ups^-: MSEs$ and START Ups^ meeting the specified requirements at (I) Technical Experience above shall also be considered qualified if they meet 80% (Eighty percent) of the requirements as specified at para (II) above in financial position.

^ Start-Ups as defined by DPIIT, applicable as on the originally scheduled date of bid opening. $ MSE as defined in the bidding documents. Bidder shall furnish documentary evidence in support of the qualifying requirements stipulated above.

(a) Following documents shall be submitted by the bidder as evidence of above: i) Audited balance sheet and Profit & Loss Account for the preceding five (5) financial years. In case, the audited balance sheet for latest financial year is not available, a certificate from the Chartered Accountant on their letter head certifying the financial turnover for the latest financial year may be submitted. ii) In case, the bidder is not covered under compulsory tax audit under the IT act for a particular financial year, a copy of acknowledgement of income tax return filed for the corresponding period should also be submitted along with either certificate from Chartered Accountant certifying the turn over or print out of Form 26AS.

3.2 Format for the Bidder for indicating its Financial Criteria (in support of meeting the requirement of para 3.1 above is to be furnished, as applicable, using this format]

Financial Year Turnover

Details of documents furnished in the Bid, in support of the aforesaid data/details/informations

(Use separate sheet for each experience/ Contract)

Date : 00-Jan-00 Printed Name : 0

Place : 00-Jan-00 Designation : 0

Specification No: SR-I/C&M/WC-4644/2026/RFx: 5002005251 (SR1/NT/W-CIVIL/DOM/B00/26/04733) ATTACHMENT-4

Renovation of B-Wing of Transit Camp at 7th Floor, RHQ Building, POWERGRID, Secunderabad

(Alternative, Deviations and Exceptions to the Provisions)

Bidder’s Name and Address (Bidder) : To

Name : 0 Sr.GM(C&M)

Address : 0 Contracts & Materials Department

0 Power Grid Corporation of India Ltd.,

0 Kavadiguda Main Road,

The bidder shall itemize any deviation from the Specifications included in his bid. Each item shall be listed (separate sheets may be used and enclosed with this Attachment) with the following information:

Sl. No. Reference clause in the Specifications Deviation Reason for change The change in Bid Prices if the deviation is withdrawn and the Bidder conforms to the Specifications

Any proposed deviation will be applicable only for the bidder whose bid is substantially responsive in accordance with Clause 22, Section ITB, Vol. I of the bidding documents. If a bid is not substantially responsive, it will be rejected and may not subsequently be made responsive by the bidder by correction of the non-conformity.

The above deviations and variations are exhaustive. We confirm that we shall withdraw the deviations proposed by us at the cost of withdrawal indicated in this attachment, failing which our bid may be rejected and Bid Security forfeited.

Date : 00-Jan-00 Printed Name : 0

Place : 0 Designation : 0

Specification No: SR-I/C&M/WC-4644/2026/RFx: 5002005251 (SR1/NT/W-CIVIL/DOM/B00/26/04733) ATTACHMENT-5

Renovation of B-Wing of Transit Camp at 7th Floor, RHQ Building, POWERGRID, Secunderabad

(Work Completion Schedule)

Bidder’s Name and Address (Bidder) : To

Name : 0 Sr.GM(C&M)

Address : 0 Contracts & Materials Department

0 Power Grid Corporation of India Ltd.,

0 Kavadiguda Main Road,

Secunderabad - 500 080

We hereby declare that the following Work Completion Schedule shall be followed by us in furnishing and installation of the subject package i.e., Renovation of B-Wing of Transit Camp at 7th Floor, RHQ Building, POWERGRID, Secunderabad for the period commencing from the effective date of Contract to us :

Sl. No. Description of Work Period in months from the effective date of Contract

Date : 00-Jan-00 Printed Name : 0

Place : 0 Designation : 0

Note: Bidders to enclose a detailed network covering all the activities to be undertaken for completion of the project indicating key dates for various milestones for each phase constituent-wise

Specification No: SR-I/C&M/WC-4644/2026/RFx: 5002005251 (SR1/NT/W-CIVIL/DOM/B00/26/04733) ATTACHMENT-6

Renovation of B-Wing of Transit Camp at 7th Floor, RHQ Building, POWERGRID, Secunderabad

(Information regarding Ex-employees of POWERGRID in our Organisation)

Bidder’s Name and Address (Bidder) : To

Name : 0 Sr.GM(C&M)

Address : 0 Contracts & Materials Department

0 Power Grid Corporation of India Ltd.,

0 Kavadiguda Main Road,

Secunderabad - 500 080

We hereby furnish the details of ex-employees of POWERGRID who had retired/ resigned at the level of General Manager and above from POWERGRID and subsequently have been employed by us:

Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID Date of joining and designation in our organisation

Date : 00-Jan-00 Printed Name : 0

Place : 0 Designation : 0

Note: The information in similar format should be furnished for each partner of joint venture in case of joint venture bid.

Specification No: SR-I/C&M/WC-4644/2026/RFx: 5002005251 (SR1/NT/W-CIVIL/DOM/B00/26/04733) ATTACHMENT-7

Renovation of B-Wing of Transit Camp at 7th Floor, RHQ Building, POWERGRID, Secunderabad

(Declaration regarding Social Accountability)

Bidder’s Name and Address (Bidder) : To

Name : 0 Sr.GM(C&M)

Address : 0 Contracts & Materials Department

0 Power Grid Corporation of India Ltd.,

0 Kavadiguda Main Road,

We conform that we stand committed to comply to all requirements of Social Accountability Standards i.e., SA8000 (latest Standard available at www.sa-intl.org) and maintain the necessary records.

Date : 00-Jan-00 Printed Name : 0

Place : 00-Jan-00 Designation : 0

Specification No: SR-I/C&M/WC-4644/2026/RFx: 5002005251 (SR1/NT/W-CIVIL/DOM/B00/26/04733) Attachment-8

Renovation of B-Wing of Transit Camp at 7th Floor, RHQ Building, POWERGRID, Secunderabad

Information for E – payment, PF details and declaration for Micro/Small and Medium Enterprise)

Bidder’s Name and Address (Bidder) : To:

Contract & Material

Name : 0 Power Grid Corporation of India Ltd.,

Address : 0 Southern Region -I Headquarters

0 Kavadiguda Main Road

0 Secunderabad - 500080 (Telangana)

I. We have read the provision in the Bidding Documents regarding furnishing the option for advance payment.

Accordingly, as per ITB Clause 9.3 as provided in Section BDS, Section III, Vol.-I of the Bidding Documents,

we hereby confirm to opt the following:

Interest Bearing Initial Advance: Supply Portion

(Select from drop down list)

We are furnishing the following details of Statutory Registration Numbers and details of Bank for electronic payment.

1. Name of the Supplier/ Contractor in whose favour payment is to be made Details

2. Address with PIN Code and State

Registered Office:

Correspondence Address:

3. Status – Company/others

[Declaration of Micro/ Small/ Medium Enterprise under Micro/ Small & Medium Enterprises Development Act 2006, if applicable]

4. Permanent Account (PAN) No.

5. GSTIN in the States/UT where the supply for services take place (states where sites under the subject package is situated)

6 Name of the States/UT GSTIN number

a Andhra Pradesh

9. PF Registration No. of the Company

10. PF Regional Office covered (with Address)

11. Name of Contact Person

12. Telephone No(s)

13. Bank Details for Electronic Payment

Name of the Bank:

Address of Branch:

Type of Account: Current Account

14. 9 digit MICR code printed at bottom in middle, next to cheque no.

15. IFSC (for RTGS)/NEFT Code (to be obtained from the Bank) Sample Cancelled Cheque to be enclosed

We hereby declare that the above information are true and correct and we agree that the payment on account of this Contract, in the event of award, be made in the above account maintained in the above mentioned Bank.

Date : 00-Jan-00 Printed Name : 0

Place : 00-Jan-00 Designation : 0

Specification No: SR-I/C&M/WC-4644/2026/RFx: 5002005251 (SR1/NT/W-CIVIL/DOM/B00/26/04733) ATTACHMENT-9

Renovation of B-Wing of Transit Camp at 7th Floor, RHQ Building, POWERGRID, Secunderabad

(Additional Information)

Bidder’s Name and Address (Bidder) : To

Name : 0 Contract & Material

Address : 0 Power Grid Corporation of India Ltd.,

0 Southern Region -I Headquarters

0 Kavadiguda Main Road

Secunderabad - 500080 (Telangana)

In support of the additional information required as per ITB Sub-Clause 9.3 (i) of the Bidding Documents, we furnish herewith our data/details/documents etc., alongwith other information, as follows (the stipulations have been reproduced in italics for ready reference):

1.0 The Bidder shall furnish

Certificate from their Banker(s) (as per prescribed formats in Form 16, Section-VI: Sample Forms and Procedures) indicating various fund based/non fund based limits sanctioned to the Bidder and the extent of utilization as on date. Such certificate should have been issued not earlier than three months prior to the date of bid opening. Wherever necessary the Employer may make queries with the Bidders’ Bankers. [Reference ITB clause 9.3(p)(i)]

1.1 In accordance with 1.0, certificate(s) from banker as per requisite format, indicating various fund based/non fund based limits sanctioned to the bidder or each member of the joint venture and the extent of utilization as on date is/are enclosed, as per the following details:

Name of the Banker by whom certificate issued

Date of certificate (should not be earlier than 3 months prior to date of bid opening)

Whether fund based/non fund based limits are indicated in the certificate

Whether extent of utilization is indicated in the certificate

1.2 The Bidder should accordingly also provide the following information/documents

(i) Details of Banker:

Address of Banker

Contact Name and Title

(ii) As per para 1.0, Authorization Letter(s) from the bidder addressed to the Banker(s), authorizing POWERGRID to seek queries about the bidder with the Banker(s) and advising the Banker(s) to reply the same promptly, is/are enclosed as per following details:

Sl. No. Letter Ref. Date Addressed to (name of the Bank)

1.0 Litigation History

The bidder should provide detailed information on any litigation or arbitration arising out of contracts completed or under execution by it over the last five years. A consistent history of awards involving litigation against the Bidder may result in rejection of Bid.

1.1 Details of litigation history resulting from Contracts completed or under execution by the bidder over the last five years. A consistent history of awards invlolving litigation against the Bidder may result in rejection of Bid.

Year Name of client, cause of litigation/arbitration and matter in dispute Details of Contract and date Award for or against the bidder Disputed amount

3.0 Description of the plant for carrying out the work

Bidders should provide information of the plant(s) for carrying out the work including the proposal of manufacturing methods in sufficient detail to demonstrate the adequacy of the bidder’s proposals to meet the technical specification.

3.0 OTHER INFORMATION

3.1 Current Contract Commitments of works in progress

Bidders should provide information on their current commitments on all contracts that have been awarded, or for which a letter of intent or acceptance has been received, or for contracts approaching completion, but for which an unqualified, full completion certificate has yet to be issued.

Details of Contract Value of outstanding work (Rs.) Estimated completion date

3.2 Financial Data:

Figures Rs in Million

Details Actual (Previous five years) Projection for next five years

Total Liability

Current Liability

Profit before taxes

Profit after taxes

Date : 00-Jan-00 Printed Name : 0

Place : 00-Jan-00 Designation : 0

Specification No: SR-I/C&M/WC-4644/2026/RFx: 5002005251 (SR1/NT/W-CIVIL/DOM/B00/26/04733) ATTACHMENT-10

Renovation of B-Wing of Transit Camp at 7th Floor, RHQ Building, POWERGRID, Secunderabad

Bidder’s Name and Address (Bidder) : To

Name : 0 Sr.GM(C&M)

Address : 0 Contracts & Materials Department

0 Power Grid Corporation of India Ltd.,

0 Kavadiguda Main Road,

Secunderabad - 500 080

Integrity Pact - NOT Applicable

Date : 00-Jan-00 Printed Name : 0

Place : 00-Jan-00 Designation : 0

Instruction for printing & submitting Integrity Pact

1. The requisite format of Integrity Pact is getting generated automatically and displayed here below.

2. Take print out of first page on a non-judicial stamp paper of Rs. 100/- and other seven pages on plain A4 size paper. Such two sets shall be prepared by the bidder.

3. All the pages of both the copies of the Integrity Pact shall be signed by the authorised representative of the bidder and duly stamped.

4. Both the original copies shall be submitted by the bidder in the form of Hard Copy as part of the first envelope before due date & time of submission of the bid.

5. For further details bidders may please refer ITB Clause 9.3 (n).

Between #REF! #REF!

Power Grid Corporation of India Limited #REF! #REF!

having its Registered Office at B-9, Qutab Institutional Area, Katwaria Sarai, New Delhi – 110016 hereinafter referred to as #REF! #REF!

"POWERGRID", #REF! #REF!

#REF! #REF! having its Registered Office at ,

hereinafter referred to as

"The Bidder/Contractor"

POWERGRID intends to award, under laid-down organisational procedures, contract(s) for Renovation of B-Wing of Transit Camp at 7th Floor, RHQ Building, POWERGRID, Secunderabad

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 1 of 8

Renovation of B-Wing of Transit Camp at 7th Floor, RHQ Building, POWERGRID, Secunderabad Package and Specification Number Specification No: SR-I/C&M/WC-4644/2026/RFx: 5002005251 (SR1/NT/W-CIVIL/DOM/B00/26/04733) POWERGRID values full compliance with all relevant laws and regulations, and the principles of economical use of resources, and of fairness and transparency in its relations with its Bidders/ Contractors.

In order to achieve these goals, POWERGRID and the above named Bidder/Contractor enter into this agreement called 'Integrity Pact' which will form a part of the bid.

It is hereby agreed by and between the parties as under:

Section I - Commitments of POWERGRID

(1) POWERGRID commits itself to take all measures necessary to prevent corruption and to observe the following principles :

a) No employee of POWERGRID, personally or through family members, will in connection with the tender, or the execution of the contract, demand, take a promise for or accept, for him/herself or third person, any material or other benefit which he/she is not legally entitled to.

b) POWERGRID will, during the tender process treat all Bidder(s) with equity and fairness. POWERGRID will in particular, before and during the tender process, provide to all Bidder(s) the same information and will not provide to any Bidder(s) confidential/ additional information through which the Bidder(s) could obtain an advantage in relation to the tender process or the contract execution.

c) POWERGRID will exclude from evaluation of Bids its such employee(s) who has any personnel interest in the Companies/Agencies participating in the Bidding/Tendering process.

(2) If Chairman and Managing Director obtains information on the conduct of any employee of POWERGRID which is a criminal offence under the relevant Anti-Corruption Laws of India, or if there be a substantive suspicion in this regard, he will inform its Chief Vigilance Officer and in addition can initiate disciplinary actions under its Rules.

Section II - Commitments of the Bidder/Contractor

(1) The Bidder/Contractor commits himself to take all measures necessary to prevent corruption. He commits himself to observe the following principles

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 2 of 8

during his participation in the tender process and during the contract execution :

a) The Bidder/Contractor will not, directly or through any other person or firm, offer, promise or give to POWERGRID, or to any of POWERGRID's employees involved in the tender process or the execution of the contract or to any third person any material or other benefit which he/she is not legally entitled to, in order to obtain in exchange an advantage during the tender process or the execution of the contract.

b) The Bidder/Contractor will not enter into any illegal agreement or understanding, whether formal or informal with other Bidders/Contractors. This applies in particular to prices, specifications, certifications, subsidiary contracts, submission or non-submission of bids or actions to restrict competitiveness or to introduce cartelization in the bidding process.

c) The Bidder/Contractor will not commit any criminal offence under the relevant Anti-corruption Laws of India; further, the Bidder/Contractor will not use for illegitimate purposes or for purposes of restrictive competition or personal gain, or pass on to others, any information provided by POWERGRID as part of the business relationship, regarding plans, technical proposals and business details, including information contained or transmitted electronically.

d) The Bidder/Contractor of foreign origin shall disclose the name and address of the Agents/representatives in India, if any, involved directly or indirectly in the Bidding. Similarly, the Bidder/Contractor of Indian Nationality shall furnish the name and address of the foreign principals, if any, involved directly or indirectly in the Bidding.

e) The Bidder/Contractor will, when presenting his bid, disclose any and all payments he has made, or committed to or intends to make to agents, brokers or any other intermediaries in connection with the award of the contract and/or with the execution of the contract.

f) The Bidder/Contractor will not misrepresent facts or furnish false/forged documents/informations in order to influence the bidding process or the execution of the contract to the detriment of POWERGRID.

(2) The Bidder/Contractor will not instigate third persons to commit offences outlined above or be an accessory to such offences.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 3 of 8

Section III- Disqualification from tender process and exclusion from future contracts

(1) If the Bidder, before contract award, has committed a serious transgression through a violation of Section II or in any other form such as to put his reliability or credibility as Bidder into question, POWERGRID may disqualify the Bidder from the tender process or terminate the contract, if already signed, for such reason.

(2) If the Bidder/Contractor has committed a serious transgression through a violation of Section II such as to put his reliability or credibility into question, POWERGRID may after following due procedures also exclude the Bidder/Contractor from future contract award processes. The imposition and duration of the exclusion will be determined by the severity of the transgression. The severity will be determined by the circumstances of the case, in particular the number of transgressions, the position of the transgressors within the company hierarchy of the Bidder/Contractor and the amount of the damage. The exclusion will be imposed for a minimum of 12 months and maximum of 3 years.

(3) If the Bidder/Contractor can prove that he has restored/recouped the damage caused by him and has installed a suitable corruption prevention system, POWERGRID may revoke the exclusion prematurely.

Section IV - Liability for violation of Integrity Pact

(1) If POWERGRID has disqualified the Bidder from the tender process prior to the award under Section III, POWERGRID may forfeit the Bid Guarantee under the Bid.

(2) If POWERGRID has terminated the contract under Section III, POWERGRID may forfeit the Contract Performance Guarantee of this contract besides resorting to other remedies under the contract.

Section V- Previous Transgression

(1) The Bidder shall declare in his Bid that no previous transgressions occurred in the last 3 years with any other Public Sector Undertaking or Government Department that could justify his exclusion from the tender process.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 4 of 8

(2) If the Bidder makes incorrect statement on this subject, he can be disqualified from the tender process or the contract, if already awarded, can be terminated for such reason.

Section VI - Equal treatment to all Bidders / Contractors

(1) POWERGRID will enter into agreements with identical conditions as this one with all Bidders.

(2) POWERGRID will disqualify from the tender process any bidder who does not sign this Pact or violate its provisions.

Section VII - Punitive Action against violating Bidders / Contractors

If POWERGRID obtains knowledge of conduct of a Bidder or a Contractor or his subcontractor or of an employee or a representative or an associate of a Bidder or Contractor or his Subcontractor which constitutes corruption, or if POWERGRID has substantive suspicion in this regard, POWERGRID will inform the Chief Vigilance Officer (CVO).

(*)Section VIII - Independent External Monitor/Monitors

(1) POWERGRID has appointed a panel of Independent External Monitors (IEMs) for this Pact with the approval of Central Vigilance Commission (CVC), Government of India, out of which one of the IEMs has been indicated in the NIT/IFB.

(2) The IEM is to review independently and objectively, whether and to what extent the parties comply with the obligations under this agreement. He has right of access to all project documentation. The IEM may examine any complaint received by him and submit a report to Chairman-cum-Managing Director, POWERGRID, at the earliest. He may also submit a report directly to the CVO and the CVC, in case of suspicion of serious irregularities attracting the provisions of the PC Act. However, for ensuring the desired transparency and objectivity in dealing with the complaints arising out of any tendering process, the matter shall be referred to the full panel of IEMs, who would examine the records, conduct the investigations and submit report to Chairman-cum-Managing Director, POWERGRID, giving joint findings.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 5 of 8

(3) The IEM is not subject to instructions by the representatives of the parties and performs his functions neutrally and independently. He reports to the Chairman-cum-Managing Director, POWERGRID.

(4) The Bidder(s)/Contractor(s) accepts that the IEM has the right to access without restriction to all documentation of POWERGRID related to this contract including that provided by the Contractor/Bidder. The Bidder/Contractor will also grant the IEM, upon his request and demonstration of a valid interest, unrestricted and unconditional access to his documentation. The same is applicable to Subcontractors. The IEM is under contractual obligation to treat the information and documents of the Bidder(s)/Contractor(s)/Subcontractor(s) with confidentiality.

(5) POWERGRID will provide to the IEM information as sought by him which could have an impact on the contractual relations between POWERGRID and the Bidder/Contractor related to this contract.

(6) As soon as the IEM notices, or believes to notice, a violation of this agreement, he will so inform the Chairman-cum-Managing Director, POWERGRID and request the Chairman-cum-Managing Director, POWERGRID to discontinue or take corrective action, or to take other relevant action. The IEM can in this regard submit non-binding recommendations. Beyond this, the IEM has no right to demand from the parties that they act in a specific manner, refrain from action or tolerate action. However, the IEM shall give an opportunity to POWERGRID and the Bidder/Contractor, as deemed fit, to present its case before making its recommendations to POWERGRID.

(7) The IEM will submit a written report to the Chairman-cum-Managing Director, POWERGRID within 8 to 10 weeks from the date of reference or intimation to him by POWERGRID and, should the occasion arise, submit proposals for correcting problematic situations.

(8) If the IEM has reported to the Chairman-cum-Managing Director, POWERGRID, a substantiated suspicion of an offence under relevant Anti-Corruption Laws of India, and the Chairman-cum-Managing Director, POWERGRID has not, within the reasonable time taken visible action to proceed against such offence or reported it to the CVO, the Monitor may also transmit this information directly to the CVC, Government of India.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 6 of 8

(9) The word ‘IEM’ would include both singular and plural.

(*) This Section shall be applicable for only those packages wherein the IEMs have been identified in Section – I : Invitation for Bids and/or Clause ITB 9.3 in Section – III: Bid Data Sheets of Conditions of Contract, Volume-I of the Bidding Documents.

Section IX - Pact Duration

This Pact begins when both parties have legally signed it. It expires for the Contractor after the closure of the contract and for all other Bidder's six month after the contract has been awarded.

Section X - Other Provisions

(1) This agreement is subject to Indian Law. Place of performance and jurisdiction is the establishment of POWERGRID. The Arbitration clause provided in the main tender document / contract shall not be applicable for any issue / dispute arising under Integrity Pact.

(2) Changes and supplements as well as termination notices need to be made in writing.

(3) If the Contractor is a partnership firm or a consortium or Joint Venture, this agreement must be signed by all partners, consortium members and Joint Venture partners.

(4) Nothing in this agreement shall affect the rights of the parties available under the General Conditions of Contract (GCC) and Special Conditions of Contract (SCC).

(5) Views expressed or suggestions/submissions made by the parties and the recommendations of the CVO/IEM# in respect of the violation of this agreement, shall not be relied on or introduced as evidence in the arbitral or judicial proceedings (arising out of the arbitral proceedings) by the parties in connection with the disputes/differences arising out of the subject contract.

# CVO shall be applicable for packages wherein IEM are not identified in Section IFB/BDS of Condition of Contract, Volume-I. IEM shall be applicable for packages wherein IEM are identified in Section IFB/BDS of Condition of Contract, Volume-I.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 7 of 8

(6) Should one or several provisions of this agreement turn out to be invalid, the remainder of this agreement remains valid. In this case, the parties will strive to come to an agreement to their original intentions.

Signature Signature

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

(Office Seal) (Office Seal)

Designation : #REF!

Witness 1 : Witness 1 :

Designation : Designation :

Witness 2 : Witness 2 :

Designation : Designation :

Integrity Pact Page 8 of 8

Specification No: SR-I/C&M/WC-4644/2026/RFx: 5002005251 (SR1/NT/W-CIVIL/DOM/B00/26/04733) ATTACHMENT-11

Renovation of B-Wing of Transit Camp at 7th Floor, RHQ Building, POWERGRID, Secunderabad

Bidder’s Name and Address (Bidder) : To

Name : 0 Sr.GM(C&M)

Address : 0 Contracts & Materials Department

0 Power Grid Corporation of India Ltd.,

0 Kavadiguda Main Road,

Secunderabad - 500 080

Further, we hereby confirm that except as mentioned in the Schedule – 4 (Alternative, Deviations and Exceptions to the Provisions) hereof and/or the Covering Letter, forming part of our First Envelope :

(i) there are no discrepancies/inconsistencies and deviations/omissions/ reservations to the Bidding Documents, in the Second Envelope bid;

We also confirm that in case any discrepancies/ inconsistencies and deviations/ omissions/ reservations, as referred to in para (i) and (ii) above, is observed in the Second Envelope, the same shall be deemed as withdrawn/rectified without any financial implication, whatsoever to POWERGRID. However, in case of any arithmetical errors, the same shall be governed as per the provision of ITB Sub-Clause 27.2 read in conjunction with BDS

Date 0-Jan-1900 Printed Name 0

Place 0-Jan-1900 Designation 0

Specification No: SR-I/C&M/WC-4644/2026/RFx: 5002005251 (SR1/NT/W-CIVIL/DOM/B00/26/04733) ATTACHMENT-10

Renovation of B-Wing of Transit Camp at 7th Floor, RHQ Building, POWERGRID, Secunderabad

Bidder’s Name and Address (Bidder) : To

Name : 0 Sr.GM(C&M)

Address : 0 Contracts & Materials Department

0 Power Grid Corporation of India Ltd.,

0 Kavadiguda Main Road,

Secunderabad - 500 080

Safety Pact - separately attached herewith in Volume-III.

Date : 0 Printed Name : 0

Place : 0 Designation : 0

Specification No: SR-I/C&M/WC-4644/2026/RFx: 5002005251 (SR1/NT/W-CIVIL/DOM/B00/26/04733) ATTACHMENT-13

Renovation of B-Wing of Transit Camp at 7th Floor, RHQ Building, POWERGRID, Secunderabad

(Declaration regarding Code of Integrity for Public Procurement (CIPP) Policy of POWERGRID)

Bidder’s Name and Address (Bidder) : To

Name : 0 Sr.GM(C&M)

Address : 0 Contracts & Materials Department

0 Power Grid Corporation of India Ltd.,

0 Kavadiguda Main Road,

Secunderabad - 500 080

We hereby declare that we have read and abide by the Code of Integrity for Public Procurement (CIPP) Policy of POWERGRID, as detailed herein below:

Code of Integrity for Public Procurement: 1.1 Employer as well as bidders, suppliers, contractors and consultants should observe the highest standard of ethics and should not indulge in the following prohibited practices, either directly or indirectly, at any stage during the procurement process or during execution of resultant contracts:

i) “Corrupt practice”: making offers, solicitation or acceptance of bribe, rewards or gifts or any material benefit, in exchange for an unfair advantage in the procurement process or to otherwise influence the procurement process or contract execution; ii) “Fraudulent practice”: any omission or misrepresentation that may mislead or attempt to mislead so that financial or other benefits may be obtained or an obligation avoided. This includes making false declaration or providing false information for participation in a tender process or to secure a contract or in execution of the contract; iii) “Anti-competitive practice”: any collusion, bid rigging or anti-competitive arrangement, or any other practice coming under the purview of The Competition Act, 2002, between two or more bidders, with or without the knowledge of the Employer, that may impair the transparency, fairness and the progress of the procurement process or to establish bid prices at artificial, non-competitive levels; iv) “Coercive practice”: harming or threatening to harm, persons or their property to influence their participation in the procurement process or affect the execution of a contract;

v) “Conflict of interest”: any personal, financial, or business relationship between the bidder and any personnel of the procuring entity who are directly or indirectly related to the procurement or execution process of the contract, which can affect the decision of the procuring entity directly or indirectly. vi) “Undue Advantage”: improper use of information obtained by the bidder from the procuring entity with an intent to gain an unfair advantage in the procurement process or for personal gain. This also includes if the bidder (or his allied firm) provided services for the need assessment/ procurement planning of the tender process in which it is participating; vii) “Obstructive practice”: materially impede the Employer’s investigation into allegations of one or more of the above mentioned prohibited practices either by deliberately destroying, falsifying, altering; or by concealing of evidence material to the investigation; or by making false statements to investigators and/or by threatening, harassing or intimidating any party to prevent it from disclosing its knowledge of matters relevant to the investigation or from pursuing the investigation; or by impeding the Employer’s rights of audit or access to information.

1.2 Obligations for Proactive Disclosures i) POWERGRID as well as bidders, suppliers, contractors and consultants, are obliged under Code of Integrity for Public Procurement to suo-moto proactively declare any conflicts of interest (coming under the definition mentioned above – pre-existing or as and as soon as these arise at any stage) in any procurement process or execution of contract. Failure to do so would amount to violation of this code of integrity; and ii) Any bidder must declare, whether asked or not in a bid document, any previous transgressions of such a code of integrity with any entity in any country during the last three years or of being debarred by any other procuring entity. Failure to do so would amount to violation of this code of integrity. iii) To encourage voluntary disclosures, such declarations would not mean automatic disqualification for the bidder making such declarations. The declared conflict of interest may be evaluated and mitigation steps, if possible, may be taken by POWERGRID. Similarly voluntary reporting of previous transgressions of Code of Integrity elsewhere may be evaluated and barring cases of various grades of debarment, an alert watch may be kept on the bidder’s actions in the tender and subsequent contract.

1.3 Punitive Provisions: Without prejudice to and in addition to the rights of POWERGRID to other penal provisions as per the Bidding Documents or Contract, if POWERGRID comes to a conclusion that a (prospective) bidder/supplier, directly or through an agent, has violated this code of integrity in competing for the contract or in executing a contract, POWERGRID may take appropriate measures including one or more of the following: i) if the bid(s) is under consideration in any procurement a) Forfeiture or encashment of Bid Security b) calling off of any pre-contract negotiations, and; c) rejection and exclusion of the bidder from the procurement process ii) if a contract has already been awarded a) Cancellation/termination of the contract in question; b) Forfeiture or encashment of Contract Performance Guarantee (CPG) of the contract in question; iii) Provisions in addition to above: a) Removal from the list of registered suppliers and banning/debarment of the bidder/contractor from participation in future procurements in line with POWERGRID’s policy for “Black-Listing of Firms / Banning of Business”. b) In case of anti-competitive practices, information for further processing may be filed with the Competition Commission of India; c) Initiation of suitable disciplinary or criminal proceedings against any individual or staff found responsible.

1.4 In pursuance to this policy, the Employer will have the right to require that the provision be included in Bidding Documents and in contracts, requiring Bidders, suppliers, and contractors and their sub-contractors to permit the Employer to inspect their accounts and records and other documents relating to bid submission and contract performance under this project only and to have them audited by auditors appointed by the Employer.

Further, we hereby confirm that incase of transgression of CIPP, we are aware that we may get delisted from Registered Suppliers / Contractors and POWERGRID may take other punitive actions such as Cancellation of Contracts, Banning and Blacklisting or action in Competition Commission of India etc.

We hereby confirm that we observe the highest standard of ethics and shall not indulge in the following prohibited practices, either directly or indirectly, at any stage during the procurement process or during execution of resultant contracts:

i) Corrupt Practice

ii) Fradulent Practice

iii) Anti-competitive Practice

iv) Coercive Practice

v) Conflict of Interest

vi) Obstructive Practice

Date 0-Jan-1900 Printed Name 0

Place 0-Jan-1900 Designation 0

Specification No: SR-I/C&M/WC-4644/2026/RFx: 5002005251 (SR1/NT/W-CIVIL/DOM/B00/26/04733) ATTACHMENT-14

Renovation of B-Wing of Transit Camp at 7th Floor, RHQ Building, POWERGRID, Secunderabad

(Declaration in regard to bid capacity)

Bidder’s Name and Address (Bidder) : To

Name: 0 Sr.GM(C&M)

Address: 0 Contracts & Materials Department

0 Power Grid Corporation of India Ltd.,

0 Kavadiguda Main Road,

Secunderabad - 500 080

In support of determining the balace bid capacity of the bidders as stipulated in the Qualification Requirements (QR) in Section-III of the Bidding Documents, we hereby declare the following details:

I) Details of the contracts awarded by SR-I, POWERGRID :

S No. Details of the contracts awarded by SR-I, POWERGRID in FY 2025-26 LOA/ PO reference number along with date of award

II) Details of the tenders floated by SR-I, POWERGRID, for which bidder has submitted their bid:

S No. Details of the tenders floated by SR-I, POWERGRID in FY 2025-26, for which bidder has submitted their bid: Tender reference number (RFx / Specification No.) & date of tender publication

Date : 00-Jan-00 Printed Name : 0

Place : 00-Jan-00 Designation : 0

Specification No: SR-I/C&M/WC-4644/2026/RFx: 5002005251 (SR1/NT/W-CIVIL/DOM/B00/26/04733) ATTACHMENT-15

Renovation of B-Wing of Transit Camp at 7th Floor, RHQ Building, POWERGRID, Secunderabad

(Declaration by the Bidder for 'POWERGRID Whistle Blower and Fraud Prevention Policy')

Bidder’s Name and Address (Bidder) : To

Name : 0 Sr.GM(C&M)

Address : 0 Contracts & Materials Department

0 Power Grid Corporation of India Ltd.,

0 Kavadiguda Main Road,

Secunderabad - 500 080

We hereby declare that we, along with our associate/ collaborators/ sub-contractors/ sub-vendors/consultants/ service providers shall strictly adhere to the 'POWERGRID Whistle Blower and Fraud Prevention Policy'.

We, along with our associate / collaborator / subcontractors / sub-vendors / consultants / service providers shall observe the highest standard of ethics and shall not indulge or allow anybody else working in our organization to indulge in fraudulent activities during execution of the contract and would immediately apprise the Employer about any fraud or suspected fraud as soon as it comes to their notice.

Date 0-Jan-1900 Printed Name 0

Place 0-Jan-1900 Designation 0

Specification No: SR-I/C&M/WC-4644/2026/RFx: 5002005251 (SR1/NT/W-CIVIL/DOM/B00/26/04733) Bid Form-1st Envelope

Bid Proposal Ref. No.

Power Grid Corporation of India Ltd.,

Southern Region -I Headquarters

Kavadiguda Main Road

Secunderabad - 500080 (Telangana)

Name of Contract : Renovation of B-Wing of Transit Camp at 7th Floor, RHQ Building, POWERGRID, Secunderabad

Dear Ladies and/or Gentlemen,

1.0 Having examined the Bidding Documents, including Amendments the receipt of which is hereby acknowledged, we the undersigned, offer to execute the work under the above-named package in full conformity with the said Bidding Documents. In accordance with ITB Clause 3.2 of the Bidding Documents, as per which the bid shall be submitted by the bidder under “Single Stage - Two Envelope” procedure of bidding. Accordingly, we hereby submit our Bid consisting of Techno – Commercial Part & Price Parts.

2.0 Attachments to the Bid Form

In line with the requirement of the Bidding Documents, we enclose herewith the following Attachments:

(a) Attachment 1 Bid Security, in a separate envelope, for a sum of Rs. 1,68,000 (Rs. One Lac and Sixty Eight Thousand only) initially valid for a period of Seven (7) months from the date set for opening of bids.

(b) Attachment 2 A power of attorney duly authorized by a Notary Public indicating that the person(s) signing the bid have the authority to sign the bid and thus that the bid is binding upon us during the full period of its validity in accordance with the ITB Clause 6.

(c) Attachment 3 Bidder’s Eligibility and Qualifications

(d) Attachment 4 The variation and deviations from the requirements of the Conditions of Contract, Technical Specification and Drawings in your format enclosed with the Bidding Documents, including, inter alia, the cost of withdrawal of the variations and deviations indicated therein

(e) Attachment 5 Work Completion Schedule.

(f) Attachment 6 Information regarding ex-employees of Employer in Bidder’s firm.

(g) Attachment 7 Declaration regarding Social Accountability

(h) Attachment 8 Information for E – payment, PF details and declaration for Micro/Small and Medium Enterprise

(i) Attachment 9 Additional Information

(j) Attachment 10 Integrity Pact

(k) Attachment 11 Declaration

(l) Attachment 12 Safety Pact

(m) Attachment 13 Declaration for Code of Integrity for Public Procurement (CIPP) Policy of POWERGRID.

(n) Attachment 14 Declaration in regard to bid capacity.

(o) Attachment 15 Declaration for 'POWERGRID Whistle Blower and Fraud Prevention Policy'.

(p) Attachment 21 Affidavit for self-certifictaion PPP-MII

(q) Attachment 23 Compliance to the process related to the e-RA

(r) Attachment 26 Certification by the Bidder per DoE Order

(s) Attachment 28 Hard Copy Declaration

3.0 We are aware that our bid is liable to be rejected in case the same contains any deviation/omission from the contractual and commercial conditions and technical Specifications other than those identified in the bid documents.

3.2 We declare that as specified in Bidding Documents, the RATES of all the Goods to be supplied under this contract shall remain FIRM during the currency of the contract and no price adjustment shall be applicable..

4.0 We confirm that except as otherwise specifically provided our Bid Prices include all taxes, duties, levies and charges as may be assessed on us, our Sub-Contractor/Sub-Vendor or their employees by all municipal, state or national government authorities in connection with the Facilities, in and outside of India.

4.1 100% of applicable Taxes and Duties i.e. GST, which are payable by the Employer under the Contract, shall be reimbursed by the Employer on production of satisfactory documentary evidence by the Contractor in accordance with the provisions of the Bidding Documents

4.3 We confirm that we have also registered/we shall also get registered in the GST Network with a GSTIN, in all the states where the project is located and the states from which we shall make our supply of goods.

5.0 Construction of the Contract

5.1 We declare that we have studied the mode of contracting for Domestic Bidders and we are making this proposal with a stipulation that you shall award us Single Contract covering all goods and related services.

6.0 We have read the various clauses and provisions in bid documents and confirm that all the specified stipulations are acceptable to us.

Further we understand that deviation taken in any of the above clauses by us shall make our bid non-responsive as per provision of bidding documents and rejected by you.

7.0 We undertake, if our bid is accepted, to commence the work immediately upon your Notification/Letter of Award to us, and to achieve the completion of works and related services within the time stated in the Bidding Documents.

8.0 If our bid is accepted, we undertake to provide a Performance Security in the form and amounts, and within the times specified in the Bidding Documents.

9.0 We agree to abide by this bid for a period of Six (06) months from the date initially stipulated for opening of bids as stipulated in the Bidding Documents, and it shall remain binding upon us and may be accepted by you at any time before the expiration of that period

10.0 Until a formal Contract is prepared and executed between us, this bid, together with your written acceptance thereof in the form of your Notification of Award shall constitute a binding contract between us.

11.0 We understand that you are not bound to accept the lowest or any bid you may receive.

12.0 We, hereby, declare that only the persons or firms interested in this proposal as principals are named here and that no other persons or firms other than those mentioned herein have any interest in this proposal or in the Contract to be entered into, if the award is made on us, that this proposal is made without any connection with any other person, firm or party likewise submitting a proposal is in all respects for and in good faith, without collusion or fraud.

(a) Renovation of B-Wing of Transit Camp at 7th Floor, RHQ Building, POWERGRID, Secunderabad

13.5 We declare that items left blank in the Schedules will be deemed to have been included in other items. The TOTAL for each Schedule and the TOTAL of Grand Summary shall be deemed to be the total price for executing the Facilities and sections thereof in complete accordance with the Contract, whether or not each individual item has been priced.

15 Further, we hereby confirm that except as mentioned in the Attachment -4 (Deviations) hereof:

(i) there are no discrepencies/inconsistencies and deviations/omissions/reservations to the Bidding Documents,;

16 We also confirm that in case any discrepencies/inconsitencies and deviations/omissions/reservations, as referred to in para (i) and (ii) above, is observed, the same shall be deemed as withdrawn/rectified without any finacial implication, whatsoever to POWERGRID. However, in case of any artithmetical errors, the same shall be governed as per the provisions of ITB

We, hereby, declare that only the persons or firms interested in this proposal as principals are named here and that no other persons or firms other than those mentioned herein have any interest in this proposal or in the Contract to be entered into, if the award is made on us, that this proposal is made without any connection with any other person, firm or party likewise submitting a proposal is in all respects for and in good faith, without collusion or fraud.

Thanking you, we remain,

Yours faithfully,

For and on behalf of

Date : 00-Jan-00 Printed Name : 0

Place : 00-Jan-00 Designation : 0

Please provide additional information of the Bidder

Business Address :

Country of Incorporation :

State/Province to be indicated :

Name of Principal Officer :

Address of Principal Officer :

Note: Bidders may note that no prescribed proforma has been enclosed for Attachment 2 : Power of Attorney. Bidders may use their own proforma for furnishing the required information with the bid.

USD One Lac Fifty Five Thousand Eight Hundred Eighty Five Only EURO Four Thousand Nine Hundred Sixty Only RMB Ten Thousand Three Hundred Fifty Two Only INR Six Lac Ninety One Thousand Six Hundred Forty Seven Only USD 155885/- + EURO 4960/- + RMB 10352/- + INR 691647/-

USD One Lac Fifty Five Thousand Eight Hundred Eighty Five Only plus EURO Four Thousand Nine Hundred Sixty Only plus RMB Ten Thousand Three Hundred Fifty Two Only plus INR Six Lac Ninety One Thousand Six Hundred Forty Seven Only

85 Eighty Five 60 Sixty 52 Fifty Two 47 Forty Seven

8 Eight Hundred 9 Nine Hundred 3 Three Hundred 6 Six Hundred

55 Fifty Five Thousand 4 Four Thousand 10 Ten Thousand 91 Ninety One Thousand 0 0 0 0 0 plus

1 One Lac 0 0 6 Six Lac 0 0 0 0 1

1 One 1 One 1 One 1 One 0 0 1 0 1

2 Two 2 Two 2 Two 2 Two 0 0 1 1 0

3 Three 3 Three 3 Three 3 Three 0 0 1 1 1

4 Four 4 Four 4 Four 4 Four 0 1 0 0 0

5 Five 5 Five 5 Five 5 Five 0 1 0 0 1

6 Six 6 Six 6 Six 6 Six 0 1 0 1 0

7 Seven 7 Seven 7 Seven 7 Seven 0 1 0 1 1

8 Eight 8 Eight 8 Eight 8 Eight 0 1 1 0 0

9 Nine 9 Nine 9 Nine 9 Nine 0 1 1 0 1

10 Ten 10 Ten 10 Ten 10 Ten 0 1 1 1 0

11 Eleven 11 Eleven 11 Eleven 11 Eleven 1 1 1 1 1 USD One Lac Fifty Five Thousand Eight Hundred Eighty Five Only plus EURO Four Thousand Nine Hundred Sixty Only plus RMB Ten Thousand Three Hundred Fifty Two Only plus INR Six Lac Ninety One Thousand Six Hundred Forty Seven Only

12 Twelve 12 Twelve 12 Twelve 12 Twelve

13 Thirteen 13 Thirteen 13 Thirteen 13 Thirteen

14 Fourteen 14 Fourteen 14 Fourteen 14 Fourteen

15 Fifteen 15 Fifteen 15 Fifteen 15 Fifteen

16 Sixteen 16 Sixteen 16 Sixteen 16 Sixteen 0 0 0 0 0 +

17 Seventeen 17 Seventeen 17 Seventeen 17 Seventeen 0 0 0 0 1 /- +

18 Eighteen 18 Eighteen 18 Eighteen 18 Eighteen 0 0 0 1 0 /-

19 Nineteen 19 Nineteen 19 Nineteen 19 Nineteen 0 0 0 1 1

20 Twenty 20 Twenty 20 Twenty 20 Twenty 0 0 1 0 0

21 Twenty One 21 Twenty One 21 Twenty One 21 Twenty One 0 0 1 0 1

22 Twenty Two 22 Twenty Two 22 Twenty Two 22 Twenty Two 0 0 1 1 0

23 Twenty Three 23 Twenty Three 23 Twenty Three 23 Twenty Three 0 0 1 1 1

24 Twenty Four 24 Twenty Four 24 Twenty Four 24 Twenty Four 0 1 0 0 0

25 Twenty Five 25 Twenty Five 25 Twenty Five 25 Twenty Five 0 1 0 0 1

26 Twenty Six 26 Twenty Six 26 Twenty Six 26 Twenty Six 0 1 0 1 0

27 Twenty Seven 27 Twenty Seven 27 Twenty Seven 27 Twenty Seven 0 1 0 1 1

28 Twenty Eight 28 Twenty Eight 28 Twenty Eight 28 Twenty Eight 0 1 1 0 0

29 Twenty Nine 29 Twenty Nine 29 Twenty Nine 29 Twenty Nine 0 1 1 0 1

30 Thirty 30 Thirty 30 Thirty 30 Thirty 0 1 1 1 0

31 Thirty One 31 Thirty One 31 Thirty One 31 Thirty One 1 1 1 1 1 USD 155885/- + EURO 4960/- + RMB 10352/- + INR 691647/-

32 Thirty Two 32 Thirty Two 32 Thirty Two 32 Thirty Two

33 Thirty Three 33 Thirty Three 33 Thirty Three 33 Thirty Three

34 Thirty Four 34 Thirty Four 34 Thirty Four 34 Thirty Four

35 Thirty Fivr 35 Thirty Fivr 35 Thirty Fivr 35 Thirty Fivr

36 Thirty Six 36 Thirty Six 36 Thirty Six 36 Thirty Six

37 Thirty Seven 37 Thirty Seven 37 Thirty Seven 37 Thirty Seven

38 Thirty Eight 38 Thirty Eight 38 Thirty Eight 38 Thirty Eight

39 Thirty Nine 39 Thirty Nine 39 Thirty Nine 39 Thirty Nine

40 Forty 40 Forty 40 Forty 40 Forty

41 Forty One 41 Forty One 41 Forty One 41 Forty One

42 Forty Two 42 Forty Two 42 Forty Two 42 Forty Two

43 Forty Three 43 Forty Three 43 Forty Three 43 Forty Three

44 Forty Four 44 Forty Four 44 Forty Four 44 Forty Four

45 Forty Five 45 Forty Five 45 Forty Five 45 Forty Five

46 Forty Six 46 Forty Six 46 Forty Six 46 Forty Six

47 Forty Seven 47 Forty Seven 47 Forty Seven 47 Forty Seven

48 Forty Eight 48 Forty Eight 48 Forty Eight 48 Forty Eight

49 Forty Nine 49 Forty Nine 49 Forty Nine 49 Forty Nine

50 Fifty 50 Fifty 50 Fifty 50 Fifty

51 Fifty One 51 Fifty One 51 Fifty One 51 Fifty One

52 Fifty Two 52 Fifty Two 52 Fifty Two 52 Fifty Two

53 Fifty Three 53 Fifty Three 53 Fifty Three 53 Fifty Three

54 Fifty Four 54 Fifty Four 54 Fifty Four 54 Fifty Four

55 Fifty Five 55 Fifty Five 55 Fifty Five 55 Fifty Five

56 Fifty Six 56 Fifty Six 56 Fifty Six 56 Fifty Six

57 Fifty Seven 57 Fifty Seven 57 Fifty Seven 57 Fifty Seven

58 Fifty Eight 58 Fifty Eight 58 Fifty Eight 58 Fifty Eight

59 Fifty Nine 59 Fifty Nine 59 Fifty Nine 59 Fifty Nine

60 Sixty 60 Sixty 60 Sixty 60 Sixty

61 Sixty One 61 Sixty One 61 Sixty One 61 Sixty One

62 Sixty Two 62 Sixty Two 62 Sixty Two 62 Sixty Two

63 Sixty Three 63 Sixty Three 63 Sixty Three 63 Sixty Three

64 Sixty Four 64 Sixty Four 64 Sixty Four 64 Sixty Four

65 Sixty Five 65 Sixty Five 65 Sixty Five 65 Sixty Five

66 Sixty Six 66 Sixty Six 66 Sixty Six 66 Sixty Six

67 Sixty Seven 67 Sixty Seven 67 Sixty Seven 67 Sixty Seven

68 Sixty Eight 68 Sixty Eight 68 Sixty Eight 68 Sixty Eight

69 Sixty Nine 69 Sixty Nine 69 Sixty Nine 69 Sixty Nine

70 Seventy 70 Seventy 70 Seventy 70 Seventy

71 Seventy One 71 Seventy One 71 Seventy One 71 Seventy One

72 Seventy Two 72 Seventy Two 72 Seventy Two 72 Seventy Two

73 Seventy Three 73 Seventy Three 73 Seventy Three 73 Seventy Three

74 Seventy Four 74 Seventy Four 74 Seventy Four 74 Seventy Four

75 Seventy Five 75 Seventy Five 75 Seventy Five 75 Seventy Five

76 Seventy Six 76 Seventy Six 76 Seventy Six 76 Seventy Six

77 Seventy Seven 77 Seventy Seven 77 Seventy Seven 77 Seventy Seven

78 Seventy Eight 78 Seventy Eight 78 Seventy Eight 78 Seventy Eight

79 Seventy Nine 79 Seventy Nine 79 Seventy Nine 79 Seventy Nine

80 Eighty 80 Eighty 80 Eighty 80 Eighty

81 Eighty One 81 Eighty One 81 Eighty One 81 Eighty One

82 Eighty Two 82 Eighty Two 82 Eighty Two 82 Eighty Two

83 Eighty Three 83 Eighty Three 83 Eighty Three 83 Eighty Three

84 Eighty Four 84 Eighty Four 84 Eighty Four 84 Eighty Four

85 Eighty Five 85 Eighty Five 85 Eighty Five 85 Eighty Five

86 Eighty Six 86 Eighty Six 86 Eighty Six 86 Eighty Six

87 Eighty Seven 87 Eighty Seven 87 Eighty Seven 87 Eighty Seven

88 Eighty Eight 88 Eighty Eight 88 Eighty Eight 88 Eighty Eight

89 Eighty Nine 89 Eighty Nine 89 Eighty Nine 89 Eighty Nine

90 Ninety 90 Ninety 90 Ninety 90 Ninety

91 Ninety One 91 Ninety One 91 Ninety One 91 Ninety One

92 Ninety Two 92 Ninety Two 92 Ninety Two 92 Ninety Two

93 Ninety Three 93 Ninety Three 93 Ninety Three 93 Ninety Three

94 Ninety Four 94 Ninety Four 94 Ninety Four 94 Ninety Four

95 Ninety Five 95 Ninety Five 95 Ninety Five 95 Ninety Five

96 Ninety Six 96 Ninety Six 96 Ninety Six 96 Ninety Six

97 Ninety Seven 97 Ninety Seven 97 Ninety Seven 97 Ninety Seven

98 Ninety Eight 98 Ninety Eight 98 Ninety Eight 98 Ninety Eight

99 Ninety Nine 99 Ninety Nine 99 Ninety Nine 99 Ninety Nine

100 One Hundred 100 One Hundred 100 One Hundred 100 One Hundred

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

23 Twenty Three

27 Twenty Seven

28 Twenty Eight

33 Thirty Three

37 Thirty Seven

38 Thirty Eight

73 Seventy Three

74 Seventy Four

75 Seventy Five

77 Seventy Seven

78 Seventy Eight

79 Seventy Nine

83 Eighty Three

87 Eighty Seven

88 Eighty Eight

93 Ninety Three

97 Ninety Seven

98 Ninety Eight

100 One Hundred

Renovation of B-Wing of Transit Camp at 7th Floor, RHQ Building, POWERGRID, Secunderabad”

Specification No: SR-I/C&M/WC-4644/2026/RFx: 5002005251 (SR1/NT/W-CIVIL/DOM/B00/26/04733)

Enter the details of the bidder below:

Specify type of Bidder Sole Bidder

Name of the Bidder TRUE

Address of Registered Office TRUE

Mobile no. +91 TRUE

Printed Name TRUE

Designation TRUE

Place TRUE False

#REF! ATTACHMENT-10

Name : #REF! #REF!

Address : #REF! #REF!

Integrity Pact is annexed herewith this Volume.

Date : 00-Jan-00 Printed Name : 0

Place : 0 Designation : 0

Instruction for printing & submitting Integrity Pact

1. The requisite format of Integrity Pact is getting generated automatically and displayed here below.

2. Take print out of first page on a non-judicial stamp paper of Rs. 100/- and other seven pages on plain A4 size paper. Such two sets shall be prepared by the bidder.

3. All the pages of both the copies of the Integrity Pact shall be signed by the authorised representative of the bidder and duly stamped.

4. Both the original copies shall be submitted by the bidder in the form of Hard Copy as part of the first envelope before due date & time of submission of the bid.

5. For further details bidders may please refer ITB Clause 9.3 (n).

Between 0 #REF!

Power Grid Corporation of India Limited 0 #REF!

having its Registered Office at B-9, Qutab Institutional Area, Katwaria Sarai, New Delhi – 110016 hereinafter referred to as #REF! #REF!

"POWERGRID", #REF! #REF!

0 #REF! having its Registered Office at ,

hereinafter referred to as

"The Bidder/Contractor"

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 1 of 8

In order to achieve these goals, POWERGRID and the above named Bidder/Contractor enter into this agreement called 'Integrity Pact' which will form a part of the bid.

It is hereby agreed by and between the parties as under:

Section I - Commitments of POWERGRID

(1) POWERGRID commits itself to take all measures necessary to prevent corruption and to observe the following principles :

a) No employee of POWERGRID, personally or through family members, will in connection with the tender, or the execution of the contract, demand, take a promise for or accept, for him/herself or third person, any material or other benefit which he/she is not legally entitled to.

b) POWERGRID will, during the tender process treat all Bidder(s) with equity and fairness. POWERGRID will in particular, before and during the tender process, provide to all Bidder(s) the same information and will not provide to any Bidder(s) confidential/ additional information through which the Bidder(s) could obtain an advantage in relation to the tender process or the contract execution.

c) POWERGRID will exclude from evaluation of Bids its such employee(s) who has any personnel interest in the Companies/Agencies participating in the Bidding/Tendering process.

(2) If Chairman and Managing Director obtains information on the conduct of any employee of POWERGRID which is a criminal offence under the relevant Anti-Corruption Laws of India, or if there be a substantive suspicion in this regard, he will inform its Chief Vigilance Officer and in addition can initiate disciplinary actions under its Rules.

Section II - Commitments of the Bidder/Contractor

(1) The Bidder/Contractor commits himself to take all measures necessary to prevent corruption. He commits himself to observe the following principles

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 2 of 8

during his participation in the tender process and during the contract execution :

a) The Bidder/Contractor will not, directly or through any other person or firm, offer, promise or give to POWERGRID, or to any of POWERGRID's employees involved in the tender process or the execution of the contract or to any third person any material or other benefit which he/she is not legally entitled to, in order to obtain in exchange an advantage during the tender process or the execution of the contract.

b) The Bidder/Contractor will not enter into any illegal agreement or understanding, whether formal or informal with other Bidders/Contractors. This applies in particular to prices, specifications, certifications, subsidiary contracts, submission or non-submission of bids or actions to restrict competitiveness or to introduce cartelization in the bidding process.

c) The Bidder/Contractor will not commit any criminal offence under the relevant Anti-corruption Laws of India; further, the Bidder/Contractor will not use for illegitimate purposes or for purposes of restrictive competition or personal gain, or pass on to others, any information provided by POWERGRID as part of the business relationship, regarding plans, technical proposals and business details, including information contained or transmitted electronically.

d) The Bidder/Contractor of foreign origin shall disclose the name and address of the Agents/representatives in India, if any, involved directly or indirectly in the Bidding. Similarly, the Bidder/Contractor of Indian Nationality shall furnish the name and address of the foreign principals, if any, involved directly or indirectly in the Bidding.

e) The Bidder/Contractor will, when presenting his bid, disclose any and all payments he has made, or committed to or intends to make to agents, brokers or any other intermediaries in connection with the award of the contract and/or with the execution of the contract.

f) The Bidder/Contractor will not misrepresent facts or furnish false/forged documents/informations in order to influence the bidding process or the execution of the contract to the detriment of POWERGRID.

(2) The Bidder/Contractor will not instigate third persons to commit offences outlined above or be an accessory to such offences.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 3 of 8

Section III- Disqualification from tender process and exclusion from future contracts

(1) If the Bidder, before contract award, has committed a serious transgression through a violation of Section II or in any other form such as to put his reliability or credibility as Bidder into question, POWERGRID may disqualify the Bidder from the tender process or terminate the contract, if already signed, for such reason.

(2) If the Bidder/Contractor has committed a serious transgression through a violation of Section II such as to put his reliability or credibility into question, POWERGRID may after following due procedures also exclude the Bidder/Contractor from future contract award processes. The imposition and duration of the exclusion will be determined by the severity of the transgression. The severity will be determined by the circumstances of the case, in particular the number of transgressions, the position of the transgressors within the company hierarchy of the Bidder/Contractor and the amount of the damage. The exclusion will be imposed for a minimum of 12 months and maximum of 3 years.

(3) If the Bidder/Contractor can prove that he has restored/recouped the damage caused by him and has installed a suitable corruption prevention system, POWERGRID may revoke the exclusion prematurely.

Section IV - Liability for violation of Integrity Pact

(1) If POWERGRID has disqualified the Bidder from the tender process prior to the award under Section III, POWERGRID may forfeit the Bid Guarantee under the Bid.

(2) If POWERGRID has terminated the contract under Section III, POWERGRID may forfeit the Contract Performance Guarantee of this contract besides resorting to other remedies under the contract.

Section V- Previous Transgression

(1) The Bidder shall declare in his Bid that no previous transgressions occurred in the last 3 years with any other Public Sector Undertaking or Government Department that could justify his exclusion from the tender process.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 4 of 8

(2) If the Bidder makes incorrect statement on this subject, he can be disqualified from the tender process or the contract, if already awarded, can be terminated for such reason.

Section VI - Equal treatment to all Bidders / Contractors

(1) POWERGRID will enter into agreements with identical conditions as this one with all Bidders.

(2) POWERGRID will disqualify from the tender process any bidder who does not sign this Pact or violate its provisions.

Section VII - Punitive Action against violating Bidders / Contractors

If POWERGRID obtains knowledge of conduct of a Bidder or a Contractor or his subcontractor or of an employee or a representative or an associate of a Bidder or Contractor or his Subcontractor which constitutes corruption, or if POWERGRID has substantive suspicion in this regard, POWERGRID will inform the Chief Vigilance Officer (CVO).

(*)Section VIII - Independent External Monitor/Monitors

(1) POWERGRID has appointed a panel of Independent External Monitors (IEMs) for this Pact with the approval of Central Vigilance Commission (CVC), Government of India, out of which one of the IEMs has been indicated in the NIT/IFB.

(2) The IEM is to review independently and objectively, whether and to what extent the parties comply with the obligations under this agreement. He has right of access to all project documentation. The IEM may examine any complaint received by him and submit a report to Chairman-cum-Managing Director, POWERGRID, at the earliest. He may also submit a report directly to the CVO and the CVC, in case of suspicion of serious irregularities attracting the provisions of the PC Act. However, for ensuring the desired transparency and objectivity in dealing with the complaints arising out of any tendering process, the matter shall be referred to the full panel of IEMs, who would examine the records, conduct the investigations and submit report to Chairman-cum-Managing Director, POWERGRID, giving joint findings.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 5 of 8

(3) The IEM is not subject to instructions by the representatives of the parties and performs his functions neutrally and independently. He reports to the Chairman-cum-Managing Director, POWERGRID.

(4) The Bidder(s)/Contractor(s) accepts that the IEM has the right to access without restriction to all documentation of POWERGRID related to this contract including that provided by the Contractor/Bidder. The Bidder/Contractor will also grant the IEM, upon his request and demonstration of a valid interest, unrestricted and unconditional access to his documentation. The same is applicable to Subcontractors. The IEM is under contractual obligation to treat the information and documents of the Bidder(s)/Contractor(s)/Subcontractor(s) with confidentiality.

(5) POWERGRID will provide to the IEM information as sought by him which could have an impact on the contractual relations between POWERGRID and the Bidder/Contractor related to this contract.

(6) As soon as the IEM notices, or believes to notice, a violation of this agreement, he will so inform the Chairman-cum-Managing Director, POWERGRID and request the Chairman-cum-Managing Director, POWERGRID to discontinue or take corrective action, or to take other relevant action. The IEM can in this regard submit non-binding recommendations. Beyond this, the IEM has no right to demand from the parties that they act in a specific manner, refrain from action or tolerate action. However, the IEM shall give an opportunity to POWERGRID and the Bidder/Contractor, as deemed fit, to present its case before making its recommendations to POWERGRID.

(7) The IEM will submit a written report to the Chairman-cum-Managing Director, POWERGRID within 8 to 10 weeks from the date of reference or intimation to him by POWERGRID and, should the occasion arise, submit proposals for correcting problematic situations.

(8) If the IEM has reported to the Chairman-cum-Managing Director, POWERGRID, a substantiated suspicion of an offence under relevant Anti-Corruption Laws of India, and the Chairman-cum-Managing Director, POWERGRID has not, within the reasonable time taken visible action to proceed against such offence or reported it to the CVO, the Monitor may also transmit this information directly to the CVC, Government of India.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 6 of 8

(9) The word ‘IEM’ would include both singular and plural.

(*) This Section shall be applicable for only those packages wherein the IEMs have been identified in Section – I : Invitation for Bids and/or Clause ITB 9.3 in Section – III: Bid Data Sheets of Conditions of Contract, Volume-I of the Bidding Documents.

Section IX - Pact Duration

This Pact begins when both parties have legally signed it. It expires for the Contractor after the closure of the contract and for all other Bidder's six month after the contract has been awarded.

Section X - Other Provisions

(1) This agreement is subject to Indian Law. Place of performance and jurisdiction is the establishment of POWERGRID. The Arbitration clause provided in the main tender document / contract shall not be applicable for any issue / dispute arising under Integrity Pact.

(2) Changes and supplements as well as termination notices need to be made in writing.

(3) If the Contractor is a partnership firm or a consortium or Joint Venture, this agreement must be signed by all partners, consortium members and Joint Venture partners.

(4) Nothing in this agreement shall affect the rights of the parties available under the General Conditions of Contract (GCC) and Special Conditions of Contract (SCC).

(5) Views expressed or suggestions/submissions made by the parties and the recommendations of the CVO/IEM# in respect of the violation of this agreement, shall not be relied on or introduced as evidence in the arbitral or judicial proceedings (arising out of the arbitral proceedings) by the parties in connection with the disputes/differences arising out of the subject contract.

# CVO shall be applicable for packages wherein IEM are not identified in Section IFB/BDS of Condition of Contract, Volume-I. IEM shall be applicable for packages wherein IEM are identified in Section IFB/BDS of Condition of Contract, Volume-I.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 7 of 8

(6) Should one or several provisions of this agreement turn out to be invalid, the remainder of this agreement remains valid. In this case, the parties will strive to come to an agreement to their original intentions.

Signature Signature

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

(Office Seal) (Office Seal)

Designation : Designation :

Witness 1 : Witness 1 :

Designation : Designation :

Witness 2 : Witness 2 :

Designation : Designation :

Integrity Pact Page 8 of 8

USD One Lac Fifty Five Thousand Eight Hundred Eighty Five Only EURO Four Thousand Nine Hundred Sixty Only RMB Ten Thousand Three Hundred Fifty Two Only INR Six Lac Ninety One Thousand Six Hundred Forty Seven Only USD 155885/- + EURO 4960/- + RMB 10352/- + INR 691647/-

USD One Lac Fifty Five Thousand Eight Hundred Eighty Five Only plus EURO Four Thousand Nine Hundred Sixty Only plus RMB Ten Thousand Three Hundred Fifty Two Only plus INR Six Lac Ninety One Thousand Six Hundred Forty Seven Only

85 Eighty Five 60 Sixty 52 Fifty Two 47 Forty Seven

8 Eight Hundred 9 Nine Hundred 3 Three Hundred 6 Six Hundred

55 Fifty Five Thousand 4 Four Thousand 10 Ten Thousand 91 Ninety One Thousand 0 0 0 0 0 plus

1 One Lac 0 0 6 Six Lac 0 0 0 0 1

1 One 1 One 1 One 1 One 0 0 1 0 1

2 Two 2 Two 2 Two 2 Two 0 0 1 1 0

3 Three 3 Three 3 Three 3 Three 0 0 1 1 1

4 Four 4 Four 4 Four 4 Four 0 1 0 0 0

5 Five 5 Five 5 Five 5 Five 0 1 0 0 1

6 Six 6 Six 6 Six 6 Six 0 1 0 1 0

7 Seven 7 Seven 7 Seven 7 Seven 0 1 0 1 1

8 Eight 8 Eight 8 Eight 8 Eight 0 1 1 0 0

9 Nine 9 Nine 9 Nine 9 Nine 0 1 1 0 1

10 Ten 10 Ten 10 Ten 10 Ten 0 1 1 1 0

11 Eleven 11 Eleven 11 Eleven 11 Eleven 1 1 1 1 1 USD One Lac Fifty Five Thousand Eight Hundred Eighty Five Only plus EURO Four Thousand Nine Hundred Sixty Only plus RMB Ten Thousand Three Hundred Fifty Two Only plus INR Six Lac Ninety One Thousand Six Hundred Forty Seven Only

12 Twelve 12 Twelve 12 Twelve 12 Twelve

13 Thirteen 13 Thirteen 13 Thirteen 13 Thirteen

14 Fourteen 14 Fourteen 14 Fourteen 14 Fourteen

15 Fifteen 15 Fifteen 15 Fifteen 15 Fifteen

16 Sixteen 16 Sixteen 16 Sixteen 16 Sixteen 0 0 0 0 0 +

17 Seventeen 17 Seventeen 17 Seventeen 17 Seventeen 0 0 0 0 1 /- +

18 Eighteen 18 Eighteen 18 Eighteen 18 Eighteen 0 0 0 1 0 /-

19 Nineteen 19 Nineteen 19 Nineteen 19 Nineteen 0 0 0 1 1

20 Twenty 20 Twenty 20 Twenty 20 Twenty 0 0 1 0 0

21 Twenty One 21 Twenty One 21 Twenty One 21 Twenty One 0 0 1 0 1

22 Twenty Two 22 Twenty Two 22 Twenty Two 22 Twenty Two 0 0 1 1 0

23 Twenty Three 23 Twenty Three 23 Twenty Three 23 Twenty Three 0 0 1 1 1

24 Twenty Four 24 Twenty Four 24 Twenty Four 24 Twenty Four 0 1 0 0 0

25 Twenty Five 25 Twenty Five 25 Twenty Five 25 Twenty Five 0 1 0 0 1

26 Twenty Six 26 Twenty Six 26 Twenty Six 26 Twenty Six 0 1 0 1 0

27 Twenty Seven 27 Twenty Seven 27 Twenty Seven 27 Twenty Seven 0 1 0 1 1

28 Twenty Eight 28 Twenty Eight 28 Twenty Eight 28 Twenty Eight 0 1 1 0 0

29 Twenty Nine 29 Twenty Nine 29 Twenty Nine 29 Twenty Nine 0 1 1 0 1

30 Thirty 30 Thirty 30 Thirty 30 Thirty 0 1 1 1 0

31 Thirty One 31 Thirty One 31 Thirty One 31 Thirty One 1 1 1 1 1 USD 155885/- + EURO 4960/- + RMB 10352/- + INR 691647/-

32 Thirty Two 32 Thirty Two 32 Thirty Two 32 Thirty Two

33 Thirty Three 33 Thirty Three 33 Thirty Three 33 Thirty Three

34 Thirty Four 34 Thirty Four 34 Thirty Four 34 Thirty Four

35 Thirty Fivr 35 Thirty Fivr 35 Thirty Fivr 35 Thirty Fivr

36 Thirty Six 36 Thirty Six 36 Thirty Six 36 Thirty Six

37 Thirty Seven 37 Thirty Seven 37 Thirty Seven 37 Thirty Seven

38 Thirty Eight 38 Thirty Eight 38 Thirty Eight 38 Thirty Eight

39 Thirty Nine 39 Thirty Nine 39 Thirty Nine 39 Thirty Nine

40 Forty 40 Forty 40 Forty 40 Forty

41 Forty One 41 Forty One 41 Forty One 41 Forty One

42 Forty Two 42 Forty Two 42 Forty Two 42 Forty Two

43 Forty Three 43 Forty Three 43 Forty Three 43 Forty Three

44 Forty Four 44 Forty Four 44 Forty Four 44 Forty Four

45 Forty Five 45 Forty Five 45 Forty Five 45 Forty Five

46 Forty Six 46 Forty Six 46 Forty Six 46 Forty Six

47 Forty Seven 47 Forty Seven 47 Forty Seven 47 Forty Seven

48 Forty Eight 48 Forty Eight 48 Forty Eight 48 Forty Eight

49 Forty Nine 49 Forty Nine 49 Forty Nine 49 Forty Nine

50 Fifty 50 Fifty 50 Fifty 50 Fifty

51 Fifty One 51 Fifty One 51 Fifty One 51 Fifty One

52 Fifty Two 52 Fifty Two 52 Fifty Two 52 Fifty Two

53 Fifty Three 53 Fifty Three 53 Fifty Three 53 Fifty Three

54 Fifty Four 54 Fifty Four 54 Fifty Four 54 Fifty Four

55 Fifty Five 55 Fifty Five 55 Fifty Five 55 Fifty Five

56 Fifty Six 56 Fifty Six 56 Fifty Six 56 Fifty Six

57 Fifty Seven 57 Fifty Seven 57 Fifty Seven 57 Fifty Seven

58 Fifty Eight 58 Fifty Eight 58 Fifty Eight 58 Fifty Eight

59 Fifty Nine 59 Fifty Nine 59 Fifty Nine 59 Fifty Nine

60 Sixty 60 Sixty 60 Sixty 60 Sixty

61 Sixty One 61 Sixty One 61 Sixty One 61 Sixty One

62 Sixty Two 62 Sixty Two 62 Sixty Two 62 Sixty Two

63 Sixty Three 63 Sixty Three 63 Sixty Three 63 Sixty Three

64 Sixty Four 64 Sixty Four 64 Sixty Four 64 Sixty Four

65 Sixty Five 65 Sixty Five 65 Sixty Five 65 Sixty Five

66 Sixty Six 66 Sixty Six 66 Sixty Six 66 Sixty Six

67 Sixty Seven 67 Sixty Seven 67 Sixty Seven 67 Sixty Seven

68 Sixty Eight 68 Sixty Eight 68 Sixty Eight 68 Sixty Eight

69 Sixty Nine 69 Sixty Nine 69 Sixty Nine 69 Sixty Nine

70 Seventy 70 Seventy 70 Seventy 70 Seventy

71 Seventy One 71 Seventy One 71 Seventy One 71 Seventy One

72 Seventy Two 72 Seventy Two 72 Seventy Two 72 Seventy Two

73 Seventy Three 73 Seventy Three 73 Seventy Three 73 Seventy Three

74 Seventy Four 74 Seventy Four 74 Seventy Four 74 Seventy Four

75 Seventy Five 75 Seventy Five 75 Seventy Five 75 Seventy Five

76 Seventy Six 76 Seventy Six 76 Seventy Six 76 Seventy Six

77 Seventy Seven 77 Seventy Seven 77 Seventy Seven 77 Seventy Seven

78 Seventy Eight 78 Seventy Eight 78 Seventy Eight 78 Seventy Eight

79 Seventy Nine 79 Seventy Nine 79 Seventy Nine 79 Seventy Nine

80 Eighty 80 Eighty 80 Eighty 80 Eighty

81 Eighty One 81 Eighty One 81 Eighty One 81 Eighty One

82 Eighty Two 82 Eighty Two 82 Eighty Two 82 Eighty Two

83 Eighty Three 83 Eighty Three 83 Eighty Three 83 Eighty Three

84 Eighty Four 84 Eighty Four 84 Eighty Four 84 Eighty Four

85 Eighty Five 85 Eighty Five 85 Eighty Five 85 Eighty Five

86 Eighty Six 86 Eighty Six 86 Eighty Six 86 Eighty Six

87 Eighty Seven 87 Eighty Seven 87 Eighty Seven 87 Eighty Seven

88 Eighty Eight 88 Eighty Eight 88 Eighty Eight 88 Eighty Eight

89 Eighty Nine 89 Eighty Nine 89 Eighty Nine 89 Eighty Nine

90 Ninety 90 Ninety 90 Ninety 90 Ninety

91 Ninety One 91 Ninety One 91 Ninety One 91 Ninety One

92 Ninety Two 92 Ninety Two 92 Ninety Two 92 Ninety Two

93 Ninety Three 93 Ninety Three 93 Ninety Three 93 Ninety Three

94 Ninety Four 94 Ninety Four 94 Ninety Four 94 Ninety Four

95 Ninety Five 95 Ninety Five 95 Ninety Five 95 Ninety Five

96 Ninety Six 96 Ninety Six 96 Ninety Six 96 Ninety Six

97 Ninety Seven 97 Ninety Seven 97 Ninety Seven 97 Ninety Seven

98 Ninety Eight 98 Ninety Eight 98 Ninety Eight 98 Ninety Eight

99 Ninety Nine 99 Ninety Nine 99 Ninety Nine 99 Ninety Nine

100 One Hundred 100 One Hundred 100 One Hundred 100 One Hundred

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

23 Twenty Three

27 Twenty Seven

28 Twenty Eight

33 Thirty Three

37 Thirty Seven

38 Thirty Eight

73 Seventy Three

74 Seventy Four

75 Seventy Five

77 Seventy Seven

78 Seventy Eight

79 Seventy Nine

83 Eighty Three

87 Eighty Seven

88 Eighty Eight

93 Ninety Three

97 Ninety Seven

98 Ninety Eight

100 One Hundred

Renovation of B-Wing of Transit Camp at 7th Floor, RHQ Building, POWERGRID, Secunderabad”

Schedule-I : DSR Scheduled Items

Bidder’s Name and Address (Sole Bidder) : 0 Contract Services

Address : 0 Power Grid Corporation of India Ltd.,

0 Southern Region Transmission system -I

0 Kavadiguda Main Raod, Secunderabad - 500080

All prices are in INR

Sl. No. DSR 2023 Ref No: Service Number SAC (Service Accounting Codes) Whether SAC in column ‘4’ is confirmed. If not indicate applicable the SAC # Rate of GST applicable ( in %) Whether rate of GST in column ‘6’ is confirmed. If not indicate applicable rate of GST # Description (DSR'23 Items- Civil Works) Unit Quantity Unit Erection Charges as per DSR incl. GST Unit Erection Charges as per DSR excl. GST Unit Erection Charges incl. Escl.@3% excluding GST Quoted rates excl. GST (as per Quoted Percentage) GST % Amount as per DSR excluding GST GST Quoted Amount excluding GST GST

Part-I CIVIL SCHEDULE ITEMS

1 4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) cum 5.00 6,812.00 5,772.88 5946.07 5,946.07 18.00% 29,730.35 5,351.46 29,730.35 5,351.46

2 4.12 Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification per 50kg Cement 17.00 18.15 15.38 15.84 15.84 18.00% 269.28 48.47 269.28 48.47

3 5.22A.6 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.: Thermo Mechanically Treated Bars of grade fe 500D or more KG 200.00 107.85 91.40 94.14 94.14 18.00% 18,828.00 3,389.04 18,828.00 3,389.04

4 '6.4.2 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (75kg/sq,cm) in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) Note: Fly ash brick of same class confirming to relevant IS code can also be used if clay bricks of designated class are not available. cum 1.00 9,105.95 7,716.91 7948.41 7,948.41 18.00% 7,948.41 1,430.71 7,948.41 1,430.71

5 '6.13.2 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (75kg/sq,cm) in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand). Note: Fly ash brick of same class confirming to relevant IS code can also be used if clay bricks of designated class are not available. sqm 233.00 1,123.80 952.37 980.94 980.94 18.00% 228,559.02 41,140.62 228,559.02 41,140.62

6 6.15 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. sqm 233.00 104.80 88.81 91.48 91.48 18.00% 21,314.84 3,836.67 21,314.84 3,836.67

7 8.2.2.1 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.:Granite stone slab colour black, Cherry/Ruby red: Area of slab upto 0.50 sqm sqm 13.00 5,413.50 4,587.71 4725.34 4,725.34 18.00% 61,429.42 11,057.30 61,429.42 11,057.30

8 8.2.2.2 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.:Granite stone slab colour black, Cherry/Ruby red:Area of slab over 0.50 sqm sqm 12.00 5,136.30 4,352.80 4483.38 4,483.38 18.00% 53,800.56 9,684.10 53,800.56 9,684.10

9 8.3.2 Providing edge moulding to 18mm thick Granite stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work. metre 76.00 510.95 433.01 446.00 446.00 18.00% 33,896.00 6,101.28 33,896.00 6,101.28

10 8.4 Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width up to 150 mm with epoxy resin based adhesive, including cleaning etc. complete. metre 58.00 568.55 481.82 496.28 496.28 18.00% 28,784.24 5,181.16 28,784.24 5,181.16

11 8.5 Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. each 13.00 978.70 829.41 854.29 854.29 18.00% 11,105.77 1,999.04 11,105.77 1,999.04

12 9.1.1 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Second class teak wood Cum 0.50 142,949.70 121,143.81 124778.13 124,778.13 18.00% 62,389.07 11,230.03 62,389.07 11,230.03

13 9.7.7.2 Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :Float glass panes:5.0 mm thick glass panes (weight not less than 12.50 kg/sqm). sqm 2.00 2,600.45 2,203.77 2269.88 2,269.88 18.00% 4,539.76 817.16 4,539.76 817.16

14 9.53 Providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). Each 12.00 228.85 193.94 199.76 199.76 18.00% 2,397.12 431.48 2,397.12 431.48

15 12.45.3 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I.wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum moisture resistant board sqm 350.00 1,529.10 1,295.85 1334.72 1,334.72 18.00% 467,152.00 84,087.36 467,152.00 84,087.36

16 12.52.3 Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.: 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. sqm 9.00 2,215.15 1,877.25 1933.56 1,933.56 18.00% 17,402.04 3,132.37 17,402.04 3,132.37

18 13.5.2 15 mm cement plaster on rough side of single or half brick wall of mix : 1:6 (1 cement: 6 coarse sand) sqm 299.00 395.35 335.04 345.09 345.09 18.00% 103,181.91 18,572.74 103,181.91 18,572.74

19 13.9.1 Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement.:12 mm cement plaster sqm 24.00 449.55 380.97 392.40 392.40 18.00% 9,417.60 1,695.17 9,417.60 1,695.17

20 13.21 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. Per bag of 50kg cement 52.00 22.10 18.73 19.29 19.29 18.00% 1,003.08 180.55 1,003.08 180.55

21 13.61.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work. sqm 50.00 155.90 132.12 136.08 136.08 18.00% 6,804.00 1,224.72 6,804.00 1,224.72

22 13.83.2 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.:Two coats sqm 350.00 142.80 121.02 124.65 124.65 18.00% 43,627.50 7,852.95 43,627.50 7,852.95

23 13.85.3 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.: With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre sqm 859.00 73.95 62.67 64.55 64.55 18.00% 55,448.45 9,980.72 55,448.45 9,980.72

24 13.116 Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.) Sqm 106.00 1,360.45 1,152.92 1187.51 1,187.51 18.00% 125,876.06 22,657.69 125,876.06 22,657.69

25 17.1.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests Each 1.00 6,767.40 5,735.08 5907.14 5,907.14 18.00% 5,907.14 1,063.29 5,907.14 1,063.29

26 18.7.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall :25 mm nominal outer dia Pipes. metre 25.00 401.55 340.30 350.51 350.51 18.00% 8,762.75 1,577.30 8,762.75 1,577.30

27 18.7.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall : 40 mm nominal outer dia Pipes metre 10.00 702.95 595.72 613.59 613.59 18.00% 6,135.90 1,104.46 6,135.90 1,104.46

28 18.8.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia Pipes metre 120.00 537.60 455.59 469.26 469.26 18.00% 56,311.20 10,136.02 56,311.20 10,136.02

29 18.8.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25 mm nominal outer dia Pipes metre 10.00 627.25 531.57 547.51 547.51 18.00% 5,475.10 985.52 5,475.10 985.52

30 18.77 Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. each 4.00 452.00 383.05 394.54 394.54 18.00% 1,578.16 284.07 1,578.16 284.07

TOTAL : Scheduled Items-Civil 1,566,077.75 281,893.99 1,566,077.75 281,893.99

SCHEDULE ITEMS (Electrical Portion)

1 1.10.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. Group C Point 60.00 1,704.00 1,444.07 1,444.07 18.00% 86,644.2000 15,595.9560 86,644.20 15,595.96

2 1.55.3 Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. Group C Point 40.00 994.00 842.37 842.37 18.00% 33,694.8000 6,065.0640 33,694.80 6,065.06

3 1.11 Wiring for twin control light point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. Point 6.00 1,803.00 1,527.97 1,527.97 18.00% 9,167.8200 1,650.2076 9,167.82 1,650.21

4 1.14.2 Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Metre 100.00 311.00 263.56 263.56 18.00% 26,356.0000 4,744.0800 26,356.00 4,744.08

5 1.14.3 Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Metre 200.00 373.00 316.10 316.10 18.00% 63,220.0000 11,379.6000 63,220.00 11,379.60

6 1.18.2 Supplying and drawing following pair 0.5 mm dia FRLS/HFFR PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 2 Pair Metre 200.00 39.00 33.05 33.05 18.00% 6,610.0000 1,189.8000 6,610.00 1,189.80

7 1.19 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. Metre 50.00 54.00 45.76 45.76 18.00% 2,288.0000 411.8400 2,288.00 411.84

8 1.21.1 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm Metre 200.00 151.00 127.97 127.97 18.00% 25,594.0000 4,606.9200 25,594.00 4,606.92

9 1.21.2 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm Metre 100.00 168.00 142.37 142.37 18.00% 14,237.0000 2,562.6600 14,237.00 2,562.66

10 1.24.4 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 A socket outlet Each 50.00 136.00 115.25 115.25 18.00% 5,762.5000 1,037.2500 5,762.50 1,037.25

11 1.24.5 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 6 pin 15/16 A socket outlet Each 10.00 219.00 185.59 185.59 18.00% 1,855.9000 334.0620 1,855.90 334.06

12 1.24.6 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Telephone socket outlet Each 8.00 168.00 142.37 142.37 18.00% 1,138.9600 205.0128 1,138.96 205.01

13 1.24.7 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. TV antenna socket outlet Each 8.00 168.00 142.37 142.37 18.00% 1,138.9600 205.0128 1,138.96 205.01

14 1.24.8 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Bell push Each 4.00 159.00 134.75 134.75 18.00% 539.0000 97.0200 539.00 97.02

15 1.26 Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. Each 4.00 47.00 39.83 39.83 18.00% 159.3200 28.6776 159.32 28.68

16 1.27.1 Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. 1 or 2 Module (75mmX75mm) Each 2.00 354.00 300.00 300.00 18.00% 600.0000 108.0000 600.00 108.00

17 1.27.2 Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. 3 Module (100mmX75mm) Each 8.00 384.00 325.42 325.42 18.00% 2,603.3600 468.6048 2,603.36 468.60

18 1.27.3 Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. 4 Module (125mmX75mm) Each 6.00 401.00 339.83 339.83 18.00% 2,038.9800 367.0164 2,038.98 367.02

19 1.27.4 Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. 6 Module (200mmX75mm) Each 20.00 462.00 391.53 391.53 18.00% 7,830.6000 1,409.5080 7,830.60 1,409.51

20 1.27.5 Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. 8 Module (125mmX125mm) Each 10.00 517.00 438.14 438.14 18.00% 4,381.4000 788.6520 4,381.40 788.65

1.27.6 Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. 12 Module (200mmX150mm) Each 3.00 614.00 520.34 520.34 18.00% 1,561.0200 280.9836 1,561.02 280.98

1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. Each 25.00 545.00 461.86 461.86 18.00% 11,546.5000 2,078.3700 11,546.50 2,078.37

1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. Each 15.00 659.00 558.47 558.47 18.00% 8,377.0500 1,507.8690 8,377.05 1,507.87

1.33 Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. Each 8.00 104.00 88.14 88.14 18.00% 705.1200 126.9216 705.12 126.92

TOTAL : Scheduled Items-Electrical 318,050.49 57,249.09 318,050.49 57,249.09

Total of Scheduled Items- Civil + Electrical (Schedule-I) 1,884,128.24 339,143.08 1,884,128.24 339,143.08

Percentage (%) above/below +/- on DSR 2023 Rates excluding GST mentioned above (to be quoted by Bidder) 0.00%

Total of Schedule I excluding GST considering offered % age 1,884,128.24

Total GST 339,143.08

GRAND TOTAL incl. GST 2,223,271.32

As the %variation w.r.t total DSR Amount cell left Blank the bid is considered as Non-responsive

Renovation of B-Wing of Transit Camp at 7th Floor, RHQ Building, POWERGRID, Secunderabad”

Schedule-II : Non-Scheduled Items

Bidder’s Name 0 To:

Address : 0 Contract Services

0 Power Grid Corporation of India Ltd.,

0 Southern Region Transmission system -I

Kavadiguda Main Raod, Secunderabad - 500080

Sl. No. Service Number SAC Code Whether GST is confirmed Rate of GST applicable ( in %) Whether rate of GST in column ‘6’ is confirmed. If not indicate applicable rate of GST # Description (Non Schedule Items) Unit Quantity Unit Rate without GST Total Amount excl. GST GST Remarks 99

A NON-SCHEDULE ITEMS:BUY BACK

NS_BB_1 BUYBACK 18% Buy Back by Contractor for dismantled of False ceiling materials/wooden flush door shutters/waste CPVC pipe/ waste sewerage pipe/aluminium sections/Electrical damaged wire/damaged switches/damaged sanitary fittings/etc. which are decided by engineer-In-Charge. kg 750.00 0.00 0.00

TOTAL : Non-Schedule Items-Civil 0.00 0.00

B NON-SCHEDULE ITEMS: CIVIL

Part 1: Demolishing work

NS_1 Removing of Furniture 18% Considered in the foyer area / bedroom area / open area near glazing / wardrobe area / dressing unit area in all rooms / open hall dining area/lift lobby /workers rooms. Demolition of the existing false ceiling in the foyer area / bedroom area / wardrobe area / and gypsum/Metalic false ceiling in the washroom area. The contractor has to remove the existing loose all furniture like three seater - twin seater sofa /coffee table / low height seating unit / tv units in the foyer area / tv unit in the bedroom / tv storage unit in the foyer area and in the bedroom / double cot bed / side tables of bed / round table with plastic chairs / lounge chair / wardrobe / dressing unit / mirror near the dressing unit. Disconnecting - removing the existing MEP related items like light fixtures / switch controls /switch box GI/ fans / geyser/ electrical heaters / cassette units / AC grills / smoke detectors / response indicators / speakers / fire hooters /disconnecting the fire sprinkle from false ceiling/electrical wiring including PVC conduit wherever required are to be removed and handed over to the client at site premises as per the their existing site condition to reuse or the client may not be reused the same after the proposed work are done. The debris to be cleared out of the site premises using the fire staircase or service lift with the client permission and dumped/stacked at one location in the plot area / site area (ground area or basement may be decided by client). The dumped debris in the site area to be cleared through truck transport based on the required number truck trips depending upon the load to municipal dumping yard. The vendor to quote theprice of demolition / clearing the debris from site till the municipal dump yard including labour, lead, lift and transportation. NOTE: THE DEMOLITION / REMOVAL OF FURNITURE IS CONSIDERED IN NUMBER OF ROOMS AVAILABLE AS PER SITE CONDITIONS. THE VENDOR HAS TO VISIT THE SITE, UNDERSTAND THE SCOPE OF WORK AS PER SITE CONDITIONS AND QUOTE THE SAME ACCORDINGLY ON LUMPSUM BASIS PER ROOM. ROOMS MEANS INCLUDING TOILETS. LIFT LOBBY CONSIDER AS ONE ROOM MEANS INCLUDING CORRIDOR FOR WORKERS AREA Rooms 10.00 0.00 0.00

NS_2 dismantling 18% Demolition of the existing flooring /Brick wall/ wall dado including the existing cement plaster upto 5' - 0" to 8' - 0" in height as per the existing site conditions and dismantling of existing plaster/waterproofing in sunken and removing of cinder/waste materials etc. Consider removing the alumunium partions/existing jali's / floor traps to be removed /sewerage pipe/plumbing fixtures / accessories / existing water closet / flush tank / flush tank cover / washbasin / bottle trap / tap / angle cock / bib cock / shower head / tap / two way diverter etc. All the fixtures to be handover to the client in the as per the present condition. The existing main door frame of to be removed and reused at the proposed main door entry for the same as decided by Engineer-in-Charge. The vendor has to clear the demolished debris from the washroom and dump the debris outside the washroom from their to the interior debris collection area as per the client choice / desired location in the site area / plot area (ground area or basement may be decided by client). The dumped debris in the site area to be cleared through truck transport based on the required number truck trips depending upon the load to municipal dumping yard. The vendor to quote the price of demolition / clearing the debris from site till the municipal dump yard including labour, lead, lift and transportation. Note:- 1. floor area shall be measured for floor dismantling including tiles with mortar, all plumbing/sanitary pipes & assoceries,sunken water proofing, sunken waste materials, PCC, plaster, electrical raceway etc. 2. wall area shall be measured for wall dismantling including all plumbing/sanitary accessories, wall tiles, plaster, brickwork,lintel, chokhat, plaster etc etc. SFT 5,663.00 0.00 0.00

Part 2: Civil works

NS 3 Water proofing 18% 1) Cleaning and preparation of surface with the help of wire brush or grinder. Wash the roof with clean water pressure jet. Remove all loose concrete, grease, oil using wire brush, and scrubber. Undulation in RCC roof slab surface, honeycombs, pin hones, imperfections should be chiselled shall be repaired with Polymer Modified Mortar mixed by adding 1 kg Dr. Fixit Pidicrete URP, 5 kg fresh cement, and 15 kg graded sand. (i.e., in the ratio of 1:5:15) or with dual shrinkage compensated Dr. Fixit Polymer Modified Mortar HB. Etc., complete. All pipes to be placed / inserted in the core cut areas, apply a coat of Dr. Fixit Pidicrete Epoxy bonding agent over this, sprinkling fine sand / quartz sand and fill the gap with shrinkage compensating Dr. Fixit Polymer modified mortar HB / non-shrink grout. 2) The concrete surface must be brought into surface saturated dry condition (SSD). Providing & Applying 2 or more coats of high performance two component prepacked cementitious waterproofing, Dr. Fixit Pidifin 2K, with a mix ratio of (liquid: Powder), parts by wt. - 1:2 at the rate 0. 55 - 0.58 Sq.mt / Kg for 2 coats to achieve the DFT of 1mm in a span of 4 - 6 hours with a roller / brush on the prepared concrete substrate. Over the splash zone / shower wall taking the coating up the full height and up to 1 meter height on vertical surface and on other walls and 0.3 metre on horizontal surface below threshold for complete bathroom waterproofing. All the coats to be applied in perpendicular direction to each other. Allow the coating to air cure for 3-5 days before conducting water ponding test for 24 Hrs. Note:- Necessary grouting by injection through pressure gun or motor by cement and waterproffing chemical for aresting of leakage/sepage shall be included. Make:- Pidilite/Fosroc. Sqm 204.00 0.00 0.00

NS 4 Sunken filling 18% Providing and placing brick bat or any equivalent light weight water absorbing materials filling in the sunk floors in toilets/kitchen sunks, well compacted carefully by hand beating to required slopes including consolidation, making hole or core to the beam/wall for providing 40mm dia PVC drain (spout pipe) pipe of required length, pipe should be fixed properly to the beam or wall with water proofing compound with cover the inlet pipe mouth with SS jali and packing with 40/20/10 mm stone aggregate with sufficient quantity including all lead and lifts at any height. For toilet and Kitchen sunken portions. Cum 23.00 0.00 0.00

NS 5 1:2:4 concrete 18% Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering - All work up to 8th floor level :1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20/10 mm nominal size) for screed concrete, lintel, coping or any type. Cum 3.00 0.00 0.00

NS 6 kadapa stone 18% Providing and fixing 40 mm thick kadapa stone slab to used as horizontal base for Granite slab over it, in cement mortar 1:4 (1 cement : 4 coarse sand), including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade, all complete as per the direction of Engineer-in charge. : sqm 5.00 0.00 0.00

NS 7 floor tiles 18% Providing and laying full body glazed polished Vitrified tiles in floor of size 1200X1800 mm:Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Type -Full body (Solid surface) glazed polished vetrified Tiles. size-1200X1800mm Make:- Jhonson /kajaria (premuium range) or equivalent. Sqm 260.00 0.00 0.00

NS 8 floor tiles 18% Providing and laying full body Vitrified tiles in floor of matte / antiskid finish of size 600 x 1200 mm: Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Type -Full body (solid surface) vetrified matte/antiskid Tiles. size-600X1200mm Sqm 31.00 0.00 0.00

NS 9 Wall Tiles 18% Glazed vitrified tiles polished finish wall tiles size 600 X 1200 mm for wall dado: Providing and laying Vitrified wall tiles in of size 600 x 1200 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to 1S:15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser and dado laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed vitrified tiles polished finish wall tiles size of Tile 600 x 1200 mm. Considered for wall dado upto ceiling height. Sqm 197.00 0.00 0.00

NS 10 Grouting of Tiles 18% Grouting the joints of floor or wall tiles (upto any height) of any tile size having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Sqm 31.00 0.00 0.00

NS 11 extra mortar 18% Extra providing and laying cement mortar 1:4 (I cement:4 fine aggregate) below tile in floor to maintain the level all complete as per direction of engineer-in-charge. Cum 20.00 0.00 0.00

NS 12 UPVC Window 18% Providing and fixing factory made uPVC glazed/wire mesh/sliding(Two/Three track)/slidingcumfixed/fixed/casement/louverscumfixed/louverscumcasement/any position windows/doors with multipoint locking system comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape,colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality with floted galss thickness 5mm all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note:- (i) Sites with basic wind speed > 45 m/sec as per IS 875 — Part 3 (ii) Sites with structure height more than 20m for all wind speeds Sqm 9.00 0.00 0.00

Part 3: Interior works

NS 13 TV Unit 18% 3" thk projected panel finished in Designer laminate for mounting TV: Consider the TV unit size 5' to 6' X 4' to 8' The tv unit to be a projected panel of 3" thk out of which 1.5" will be the visible side thickness surface . The rest of the thickness which is 1.5"thk to be a recessed surface, the exposed surface of recessed to be finished in 1.0 mm thk black laminate as approved by the architect / client. The frame work of aluminium frame of 1.5 mm thk guage and of size 50.80 mm x 25.40 mm at every 2' - 0" x 2' - 0" spacing vertically / horizontaly fixed to the wall. Fixing assocerries like screw/ply with screw/SS or Alumunium cleat with screw make that frame 3'' projected from wall, partition and exposed resessed area to be covered with one layer of 18 mm thk marine grade with IS 710 boiling water proof ply which comes with ten years warranty. The ply surface to be covered with 3 mm thk HDHMR sheet on all the external / visible surfaces. The exposed 3 mm thk HDHMR to be finished with 1.0 mm - 1.2 mm thk designer laminate as approved by the Design Consultant / Architect / Chief Engineer. The Designer laminate surface to be fixed with combination of flat gold / rose gold colour PVD coating beading inside stainless steel of 304 grade which is customised as per the approved sizes of 8 mm - 25 mm width based on the design intent. The beading strips to be fixed using adhesive as per Engineer-In-Charge. Also the Desinger laminate surface to have 4mm x 4mm thk grooves horizontally and vertically / paper joint. All the grooves needs to be painted to match the colour of the laminate. Necessary cut outs to be made for sockets and other services & all complete as per direction of Engineer-In-Charge. Note : The partition measurement will be considered only for visible area. NOTE: The 1.0 mm - 1.2 mm thk designer laminate to be scratch resistant / finger print impression resistant and to be from texture finish / marble series / concrete finish /Glossy finish series as approved by the Engineer-In-charge. Necessary cut outs to be made for sockets and other electrical points. Make:- Geen Ply/century/, For Alumunium channel make:- Tata/Jindal SFT 240.00 0.00 0.00

NS 14 Storage below TV Unit 18% Low height storage unit below 3" thk projected tv panel finished in laminate: Considered low height storage unit of approx. size 5' to 6' - 0" legnth x 1' - 8" to 2' - 0" ht x 1' - 8" deep to be made of 18 mm thk marine grade with IS 710 boiling water proof ply which comes with ten years warranty with a combination of shutters / open shelves / drawer units/glass shutters as per architect drawing. All the inner surfaces of the low height storage unit to be finished with 0.8 mm thk laminate and the outer / exposed surfaces to be finished with 1.0 mm - 1.2 mm thk Designer laminate of glossy / matt finish as per Engineer-In-Charge. the low height storage unit to be have alumunium profile (colour shall be decided by Engineer-In-Charge) opening for the proposed shutters. All the outer / external surfaces to be finished in designer laminate as approved of 1.0 mm thk - 1.2 mm thk as per Engineer-In-Charge. All the edges of the drawers / shutters to be finished with 1.0 mm thick PVC edge binding/lipping to match with the colour of approved laminate. The drawers to have telescopic channels with soft closure and the shutter to have soft closure box hinges , handle of approved make. Necessary cut outs to be made for sockets and other services & all complete as per direction of Engineer-In-Charge. NOTE: The 1.0 mm - 1.2 mm thk designer laminate to be scratch resistant / finger print impression resistant and to be from texture finish / marble series / concrete finish /glossy finish series as Engineer-in-charge. Necessary cut outs to be made for sockets and other electrical points. Make:- Geen Ply/century, for hardware make:- Dorma/godrej. SFT 54.00 0.00 0.00

NS 15 Pelmets 18% Pelmets for curtains: Providing & fixing of pelmet finished in 1.0 mm thk laminate on the inner and exposed surface. The approx. size to be considered 0' - 6" deep x 0' - 6" wide. The Pelmet to be made out of 18 mm thk marine grade with IS 710 boiling water proof ply which comes with ten years warranty. The plywood framework to be fixed to the true ceiling / slab / beam (including necessary hardware). The pelmet to hold dual / three channel curtains / blinds as Engineer-in-Charge. Make:- Geen Ply/century, RFT 41.00 0.00 0.00

NS 16 CNC Cut Partitions 18% Free Standing CNC cut partition finished in duco & final PU polish: Considered inside the dining hall infront of handwash area. Providing & fixing CNC partitions cut in geometrical / floral / bidri / Mashrebiya patterns as per the design approved by Engineer-in-charge. The CNC cut patterns to be made using two layers of 18 mm thk HDHMR which needs to be fixed used high quality adhesive and the same needs to be finished in duco paint as per the approved color as decided by Engineer-In-Charge. The same external surface to be finished with PU polish as the final coat to achieve glossy finish. The CNC cut free standing partitions to inside the 3" x 3" thk frame to be made of 18 mm thk marine grade with IS 710 boiling water proof ply which comes with ten years warranty and the exposed surface of the frame work to be clad with 3 mm thk HDHMR all around for the application of PU polish. The Cost To Include The Price Of CNC Cutting / duco Painting and final coat of PU polishing. The Perforated Sheet To Be Fixed to the floor and to the ceiling for to be sturdy and stable. Consider approx one length of the peforated partition to be 4' - 0" x 8' - 0" in height to understand the details of free standing partition. Necessary ss screw and hardware included for fixing of frame & all complete as per direction of Engineer-In-Charge. Make:- Geen Ply/century SFT 42.00 0.00 0.00

NS 17 12 mm Ply panneling 18% Providing & fixing of paneling made of 12 mm thk marine grade with IS 710 boiling water proof ply which comes with ten years warranty for existing wall paneling/sill paneling wherever required in proper line & alignment fixing with necessary hardware all complete as directed by Engineer-In-Charge. Necessary cut outs to be made for sockets and other electrical points. Make:- Geen Ply/century SFT 64.00 0.00 0.00

NS 18 18 mm Ply panneling 18% Providing & fixing of paneling made of 18 mm thk marine grade with IS 710 boiling water proof ply which comes with ten years warranty for wall paneling/sill paneling wherevr required in proper line & alignment fixing with necessary hardware all complete as directed by Engineer-In-Charge. Necessary cut outs to be made for sockets and other electrical points. Make:- Geen Ply/century SFT 128.00 0.00 0.00

NS 19 3mm HDHMR 18% Providing and fixing 3mm HDHMR sheet on existing ply/wall for the application of paint/fluted pannel with or without 3mmx3mm Vertical groove at edges fixed with advanced waterproofing and anti bubling glue adesive all complete as directed by Engineer-In-Charge. Necessary cut outs to be made for sockets and other electrical points. Geen Ply/century SFT 64.00 0.00 0.00

NS 20 Alumunium framing 18% Providing & fixing of the frame work of aluminium frame of 1.5 mm thk guage and of size 50.80 mm x 25.40 mm at every 2' - 0" x 2' - 0" spacing vertically / horizontaly fixed to the wall. Fixing assocerries like screw/ply with screw/SS or Alumunium cleat with screw make that frame. Necessary cut outs to be made for sockets and other electrical points. For Alumunium channel make:- Tata/Jindal SFT 32.00 0.00 0.00

NS 21 Laminate 18% Providing and fixing 0.8 mm to 1mm finished in designer/plain laminate of on existing HDHMR/ply sheet fixed with advanced waterproofing and anti bubling glue adesive all complete as directed by Engineer-In-Charge. Necessary cut outs to be made for sockets and other electrical points. Make:- Geen Ply/century SFT 32.00 0.00 0.00

NS 22 Fluted Panels 18% Fluted panels: Providing and fixing the charcoal fluted panels of in height fixed on proposed Wall/partitions. The existing ply panelling/wall to be finished in fluted panels (of wood / concrete / marble series shades) as approved by the design by engineer-in-charge. The same needs fixed using extremely strong adhesive pro bond and head less nails. The fluted panels groove to be vertical. Necessary cut outs to be made for sockets and other electrical points. SFT 99.00 0.00 0.00

NS 23 Bunk bed 2tier 18% Providing and supplying Heavy Duty Mild Steel Bunker Bed (two tier) for hostel/barrack/ use, fabricated out of 50×50×2.0 mm thick M.S. square hollow sections for vertical posts and 50×25×1.6 mm thick M.S. rectangular hollow sections for horizontal members and intermediate supports, including bed platform made of 18 mm thick commercial plywood conforming to IS:303 with 1 mm laminate on both sides fixed over frame with suitable fasteners , providing upper berth safety guard railing minimum 300 mm height made of 25×25×1.2 mm M.S. square tubes, fixed type ladder made of 25×25×1.2 mm M.S. tube with properly spaced anti-slip steps, all welding joints properly ground smooth and edges rounded, providing PVC end caps to exposed hollow sections and nylon bushes at bottom, complete surface preparation including cleaning and rust removal, applying one coat red oxide zinc chromate primer and finishing with two or more coats of synthetic enamel paint (applying by spray or powder coating of approved colour with minimum 60 micron thickness) of approved shade, complete with all materials, labour, fabrication, welding, grinding, transportation, loading/unloading and placing in position at site as directed by Engineer-in-Charge, complete in all respects. (Size 3 feetX6feet). MS section apolo/tata/jindal Each 3.00 0.00 0.00

NS 24 Overhead storage unit 18% Overhead storage unit above the platform: The overhead storage shutters to be finished in 1 mm acrylic sheet. The storage depth shall be 1 feet 3 inch. The over head Storage to be made out of 18 mm thk marine grade with IS 710 boiling water proof ply which comes with ten years warranty. The outer surface of the storage unit to be finished in 1mm acrylic sheet as approved by the engineer-in-charge. The inner surfaces to be of the over head storage to be finished in 0.8 mm thk laminate as approved. The storage shutters to have 3/4" to 1" extension below the storage line for opening the shutters using fingers as per architect drawing. The shutter to have 3 nos of hinges per shutter, including all accessories & hardware. Necessary cut outs to be made for sockets and other electrical points / ac points / access control / bio metric etc. Make:- Geen Ply/century SFT 25.00 0.00 0.00

NS 25 Storage below counter 18% Storage below counter: The storage below counter top to be made out of 18 mm thk marine grade with IS 710 boiling water proof ply which comes with ten years warranty all the exposed surfaces. The depth of storage shall be 2 feet to 2 feet 6 inch as decided by engineer-In-charge. The storage to have combination of drawers / shutters and open shelves to be finished in 1 mm acrylic sheet on outer surface and The inner surfaces of the storage unit to be finished in 0.8 mm thk laminate . All the shutters to have PVC / Acrylic machine pressed edge binding / lipping to match the color of the acrlyic sheet. The storage to have combination of shutters / drawers. The same to be fixed using drawer channels heavy duty soft closure and shutter to have hinges, and handle/push button etc, storage height from the FFL, the storage unit to have 4" high recessed modular aluminium skirting, including all accessories & hardware. Necessary cut outs to be made for sockets and other electrical points / ac points / access control / bio metric etc.The mesurement for billing will be considered only in the front storage unit elevation. Make:- Geen Ply/century SFT 25.00 0.00 0.00

NS 26 Putty 18% Putty finishing: Surface Preparation: Apply wall putty/POP on all exposed surfaces including walls, columns, gypsum partitions/false ceiling to achieve a smooth and even finish suitable for painting.Putty shall be applied in layers to achieve a total thickness of 2–3 mm and finished to a uniform, wave-free surface.Surface preparation shall include cleaning, scraping, filling of minor crevices, and sanding as required.Provide grooves at junctions and corners wherever as per Engineer-In-Charge. Sqm 608.00 0.00 0.00

NS 27 Royal Paint 18% Painting Application: Prepare and finish the surface with a total of three coats of superior Premium Emulsion Paint of approved brand and shade, following this sequence:Initial sanding of the surface.Application of one coat of primer.Sanding after putty application.Reapplication of one coat of primer.One coat of Premium Emulsion paint.Touch-up with putty wherever required.Final application of two roller coats of Premium Emulsion paint.The scope includes all necessary surface preparation activities such as cleaning, scraping, smooth filling, scaffolding, and finishing.(Primer & Putty shall be paid respective line Item. Make-1) Asian paint Royal or equivalent. sqm 382.00 0.00 0.00

NS 28 Texture Paint 18% Textured paint: Texture painting with approved concrete texture finish (lime based material / micro topping effect) two coats of Travertino Romano Powder plus one coat of Aqua wax with VELOSAN diluted with water @ 1:3 ratio and color wash with VELOSAN with water dilution @ 1:2 on existing / proposed wall surface / HDHMR / Exterior Grade MDF surface which is clear from dust and other particles, prepared with two coats of putty 2-3 mm thick and water based primer without any undulation and zero level from all dry wall joints. Application system: Coat 1: Travertino Romano base coat applied evenly on the existing / proposed wall surface / HDHMR / Exterior Grade MDF using Trowels drying time one hour. Coat 2: Apply second coat of Travertino Romano Top Coat applied evenly on the same surface with Desired texture and neccessary buffing to achieve the desired smoothness as per the Enigneer-in-charge, consider approx drying time two hours. Coat 3: VELOSAN Aqua wash to partially seal the surfaces and to reduce the absorption of later color wash VELOSAN diluted with water @1:3 ratio and applied with a sponge roller approx drying time one hour. Coat 4: VELOSAN color wash mixed with desired / aprpoved color as per the look & feel presentation / Chief engineer / Design consultant choice to achieve dual tone effect, applied on the surfaces using a sponge. VELOSAN diluted with water @ 1:2 ratio, and to be applied without any color patches - approx drying time one hour. Considered Color/texutures paint materials of Asian paints / equivalent make. This item is including putty & primer application as per specification. Sqm 128.00 0.00 0.00

NS 29 wall art decoration 18% providing and installtion (or making at site) of wall art decoration/ wall decor/asthetic type/ wall art type painting on existing wall/panneling by HDHMR (CNC Cut with painting/duco painting) as per selected desgin or as decided by engineer-In-Charge. SFT 48.00 0.00 0.00

NS 30 Ply pannelling of choukhat 18% Ply panelling for all the door frames finished in Veneer: The existing door frame after minor modifications / repairs which is prepared to look like a new door frame to be clad with 18 mm thk marine grade with IS 710 boiling water proof ply which comes with ten years warranty panelling on all three sides including above the lintel part to make it look like a complete framed structure front / side and back of the frame and the same needs to be finished in 3.0 mm thk premium designer veneer of Century / green ply / equivalent makes. All the edges to of the panelling to have 3mm x 3mm 'v' groove and 3mm or bigger groove design other than edge shall be as per Engineer-In-Charge.The groove needs to be painted to match the colour of the veneer & complete as per drawing or as directed by Engineer-In-Charge.. Make:- Geen Ply/century SFT 292.00 0.00 0.00

NS 31 Room main Door 18% Single leaf solid door finished in Veneer on both sides for all the internal areas: The door frame to have a proposed 35 to 40 mm thk flush door / block board shutter of marine grade / boiling water proof to be finished in 3 mm thk premium designer veneer of century / green ply / equivalent make on both sides & all around teak wood lipping at edges 25 mm thickness fixing with necessary nails/hardware. The shutters to have 3 mm x 3mm grooves horizontally & vertically as per the Engineer-In-Charge. Make:- Geen Ply/century SFT 168.00 0.00 0.00

NS 32 Tower Bolt 18% Providing and fixing SS tower bolts Satin finish 250 mm long with necessary screws etc. complete : Make;-Doorset/godrej or equivalent. Each 20.00 0.00 0.00

NS 33 Hinges 18% Providing and fixing SS 304 two ball bearing hinges of size 100X75x3 mm SS satin finish with necessary screws etc. complete. Doorset/godrej/dorma or equivalent. Each 80.00 0.00 0.00

NS 34 Hndle with Lock & key 18% Provind and fixing SS handle with fire rated mortrise lock (55 basket) with 60mm profile cylder one side key and one side knob of satin finish will all complete as per direction of Engineer-In-Charge. Make:-dorma/doorset/godrej. (model as approved by engineer-in -charge.) Each 10.00 0.00 0.00

NS 35 Hndle with Lock & without key 18% Provind and fixing SS handle with fire rated mortrise lock (55 basket) with 60mm profile cylder one side coin and one side knob of satin finish will all complete as per direction of Engineer-In-Charge. Make:-dorma/doorset/godrej. (model as approved by engineer-in -charge.) Each 10.00 0.00 0.00

NS 36 Magnetic door stooper 18% Providing & fixing of magnetic door stoooper at back side of door (floor mounted or wall mounted heavy duty) to hold the door. Each 20.00 0.00 0.00

NS 37 autometic Glass Door 18% Providing & fixing of autometic sliding double door of Toughned glass with autometic operating system of Track Length 4.15 metre with motion +safety radar, zensafe radar with remote control to hold glass shutter max 160kg & 2000 mm for double shutter of clear max height 2700 with powersocket with all complete as per direction of Engineer-In-charge. Make-Dorma model No XL-C 4131 or Equivalent. Each 1.00 0.00 0.00

NS 38 Glass Door 18% Double leaf glass doors with modular door frame for Guest House : Supply & fixing of DORMAKABA ALT 100 SG aluminium glazed door (double leaf) with glass infill of toughened / laminated glass with Alterra rebate door frame system all around the door. Aluminium stile to be formed out of 100x40mm horizontal and vertical door profile frame with clips & seals. Door hardware -open door closer TS 70, offset pull handle 350mm with narrow stile lock package and door drop down seal. Suitable for glass thickness of 10/12/13.52mm.the profile shall be matt natural anodized, the profile manufacturer to supply all the necessary clips, seals and fixing accessories for the system. All profiles to be with 1.5 mm gauge thickness excluding 20 microns of anodizing. Door size: 5'- 6" x 7'- 0" (suit to site conditions). Make Dorma / Alloy / Equivalent. Each 1.00 0.00 0.00

NS 39 WPC door Frame 18% WPC Door frame 65X125mm: Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws, resistance to spread of flame with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5 mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Frame size 65 x 125 mm Make-Qute/HDHMR Doors-NCL/Ecoste/Ecocell/green plypannel/DEC Industries/Jamex or equivalant. Metre 10.00 0.00 0.00

NS 40 WPC Door Shutters 18% Providing and fixing factory made minimum 28 mm thick single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size and design/pattern comprising of virgin polymer, calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives and resistance to spread of flame of with property of being termite/borer proof, water/moisture proof and fire retardant of approved brand and fixing all complete as per direction of Engineer-In- Charge. Make-Qute/HDHMR Doors-NCL/Ecoste/Ecocell/green plypannel/DEC Industries/Jamex or equivalant. Sqm 16.00 0.00 0.00

NS 41 DGU Glass for sound proof 18% Aluminum section with Polyester powder coating DGU acoustic proof glass ( 6mm+6mm) Sealed with Water proof Silicon sealant (necessary harware fitting screw/sealants/spacers/fasteners/EDPM/Neoprene gasket etc shall be included). The glass to be fixed from inside the guest room area without disturbing the existing structural glazing glass all complete as directed by Engineer-In-Charge. making suitable arrangment for opening of existing casement window & inside area make soundproof arrangment at window area or as directed by engineer-in-charge. SFT 574.00 0.00 0.00

Part-4 Bathroom/Toilets Sanitary

NS 42 SWR Pipe 110 mm 18% SWR pipe 110 mm: Providing, fixing , laying, testing & commissioning (Concealed/surface mounted or underground) uPVC SWR Rigid pipes confirming to IS 13592 Type B of PRICE/SUPREME/FINOLEX or equivalent make for drainage line including necessary fittings such as couplers, bends, tees, cross tees, cowls, 2way/3way junction of any degree,clamps, rubber packing ring, acess door etc. wherever required confirming to IS-14735, joining with adhessive solvent cement including cost of jointing materials and all other necessary fixtures, fitting, air and water tight testing of the line etc. complete at all levels. (Centre line length of completed pipe line shall be measured for payment purpose) (A) 110mm outer dia. metre 43.00 0.00 0.00

NS 43 SWR pipe 75 mm 18% SWR pipe 75 mm: Providing, fixing , laying, testing & commissioning (Concealed/surface mounted or underground) uPVC SWR Rigid pipes confirming to IS 13592 Type B of PRICE/SUPREME/FINOLEX or equivalent make for drainage line including necessary fittings such as couplers, bends, tees, cross tees, cowls, 2way/3way junction of any degree,clamps, rubber packing ring, acess door etc. wherever required confirming to IS-14735, joining with adhessive solvent cement including cost of jointing materials and all other necessary fixtures, fitting, air and water tight testing of the line etc. complete at all levels. (Centre line length of completed pipe line shall be measured for payment purpose) (B) 75mm outer dia. metre 38.00 0.00 0.00

NS 44 SWR pipe 40-50 mm 18% SWR pipe 40-50 mm: Providing, fixing , laying, testing & commissioning (Concealed/surface mounted or underground) uPVC SWR Rigid pipes confirming to IS 13592 Type B of PRICE/SUPREME/FINOLEX or equivalent make for drainage line including necessary fittings such as couplers, bends, tees, cross tees,reducer, cowls, 2way/3way junction of any degree,clamps, rubber packing ring, acess door etc. wherever required confirming to IS-14735, joining with adhessive solvent cement including cost of jointing materials and all other necessary fixtures, fitting, air and water tight testing of the line etc. complete at all levels. (Centre line length of completed pipe line shall be measured for payment purpose) (C) 50mm outer dia. metre 8.00 0.00 0.00

NS 45 Nahani / floor Trap 18% Nahani / floor Trap: Providing, fixing, testing and commissioning uPVC SWR self cleaning Nahani trap, plain floor trap/ Multi floor trap etc. confirming to IS-14735 of 110 mm dia inlet and 75 mm outlet nominal dia. including fixing PVC reducer of 110mm dia. to 75 mm dia. and jointing with adhessive solvent cement including cost of cutting and making good the walls and floors at all levels etc. complete. each 18.00 0.00 0.00

NS 46 CPVC Ball Valve 25 mm 18% CPVC Ball Valve 25 mm dia: Providing and fixing CPVC Ball Valve 25 mm dia with lever arm conforming to SDR 11 pressure class as per ASTM D – 2846 of PRICE/SUPREME/FINOLEX or equivalent make joining with adhessive solvent cement including cost of jointing materials and all other necessary fixtures, fitting, air and water tight testing etc. complete at all levels. each 1.00 0.00 0.00

NS 47 CPVC Ball Valve 32 mm 18% CPVC Ball Valve 32 mm dia : Providing and fixing CPVC Ball Valve 32 mm dia with lever arm conforming to SDR 11 pressure class as per ASTM D – 2846 of PRICE/SUPREME/FINOLEX or equivalent make joining with adhessive solvent cement including cost of jointing materials and all other necessary fixtures, fitting, air and water tight testing etc. complete at all levels. each 1.00 0.00 0.00

NS 48 CPVC Ball Valve 40 mm 18% CPVC Ball Valve 40 mm dia: Providing and fixing CPVC Ball Valve 40 mm dia with lever arm conforming to SDR 11 pressure class as per ASTM D – 2846 of PRICE/SUPREME/FINOLEX or equivalent make joining with adhessive solvent cement including cost of jointing materials and all other necessary fixtures, fitting, air and water tight testing etc. complete at all levels. each 1.00 0.00 0.00

NS 49 Shower Enclosure 18% Supply & installation of premium quality of shower cubicle enclosure of toughned galss 8mm thick with hardware fitting of Stainless steel matte chorme finished in L shape/straignt/cubical shape, one door-one fixed or two fixed -one door with handle inner & outer in L shape, easy to clean, dimension of glass length as mentioned in drawing or as direction of Engineer-In Charge. Design/type/brand of shower cubical should be finalized by Engineer-In-charge before execution of work. partitons by glass including frames shall be mesured for billing. Make: Kohler / Jaquar/ TOTO/ and Grohe. SFT 168.00 0.00 0.00

NS 50 Floor Mounted WC 18% Floor mounted WC with all fittings- Providing and fixing premium quality white vitreous china Floor mounted box rim single peice WC , UF soft close slim seat covers with dual flush 3/6 litre low profile flush (LPF), anti germ glaze, toilet seat cover with antimicrobial agent with all fittings and fixtures complete for P trap including cutting and making good the walls and floors wherever required as per manufacturers specification and direction of Engineer-in-charge. Jaquar Make- model no- LYS-WHT-38851P180UFSMN OR EQUIVALENT. Each 7.00 0.00 0.00

NS 51 Wash Basin 18% Lavatory/ Wash Basin: Providing and fixing premium quality white vitreous china over-counter oval shape thin rim table top wash basin of minimum size 500x380x120 mm with all other fittings and fixtures complete including cuttings and making good the walls and floor wherever required as per manufacturers specification and direction of Engineer-in-charge.Jaquar Model no-JDS-WHT-25937 OR EQUIVALENT. Each 9.00 0.00 0.00

NS 52 Click Clack Waste 18% Click Clack Waste:-Providing and fixing premium quality C.P Brass chrome finished click clack waste 32 mm size half thread with 80 mm height with all other fittings and fixtures complete including cuttings and making good the walls and floor wherever required as per manufacturers specification and direction of Engineer-in-charge. Jaquar Model no-ALD-CHR-729 OR EQUIVALENT. Each 9.00 0.00 0.00

NS 53 Bottle Trap 18% Bottle trap: Providing and fixing premium quality C.P brass chrome finished 32 mm size with 300 mm & 190mm long wall connection pipes & wall flange Removable trap eye for easy cleaning, with all other fittings and fixtures complete including cuttings and making good the walls and floor wherever required as per manufacturers specification and direction of Engineer-in-charge. Jquar Model no-ALD-CHR-769L300X190 OR EQUIVALENT Each 9.00 0.00 0.00

NS 54 Faucet/Tap 18% Faucet: Providing and fixing premium quality C.P. brass chrome finish Pillar cock faucet 152 mm height with 15.03 LPM @ 3 bar. faucet shall fixed with 450 mm long braded hose complete with all other fittings and fixtures complete including cuttings and making good the walls and floor wherever required as per manufacturers specification and direction of Engineer-in-charge Jaquar model no-ALI-CHR-85001 OR EQUIVALENT. Each 9.00 0.00 0.00

NS 55 Diverter exposed kit part 18% Exposed part kit of Diverter: Providing and fixing premium quality C.P. brass chrome finish of single lever exposed parts kit of diverter of operating lever,cartiridge sleeve, wall flange (with seal) & assembly sleeve & Button (compatible with ALD-065M) complete with all other fittings and fixtures complete including cuttings and making good the walls and floor wherever required as per manufacturers specification and direction of Engineer-in-charge. Jaquar model no- ALI-CHR-85065MK or Equivalent. Each 7.00 0.00 0.00

NS 56 Concealed Diverter 18% Concealed Diverter: Providing and fixing premium quality C.P. brass Concealed body for single lever diverter 40 mm cartridge with button assembly (button on Top) but without exposed parts (compatible with ALI-CHR-85065MK) complete with all other fittings and fixtures complete including cuttings and making good the walls and floor wherever required as per manufacturers specification and direction of Engineer-in-charge. Jaquar model no- ALD-CHR-065M or Equivalent. Each 7.00 0.00 0.00

NS 57 Spout/Faucet 18% Spout: Providing and fixing premium quality C.P. brass chrome finish of Bath Spout With Button Attachment For Hand Shower With Wall Flange with 21.14 LPM @ 3 Bar complete with all other fittings and fixtures complete including cuttings and making good the walls and floor wherever required as per manufacturers specification and direction of Engineer-in-charge. Jaquar model no- SPJ-CHR-85463 or Equivalent. Each 7.00 0.00 0.00

NS 58 Shower 18% Shower: Providing and fixing premium quality C.P. brass chrome finish of Overhead Shower 240X240mm Square Shape Single Flow (Body & Face Plate Stainless Steel) with Rubit Cleaning System with 37.91 LPM @ 3 Bar complete with all other fittings and fixtures complete including cuttings and making good the walls and floor wherever required as per manufacturers specification and direction of Engineer-in-charge. Jaquar model no- OHS-CHR-1629 or Equivalent. Each 7.00 0.00 0.00

NS 59 Shower Arm 18% Shower Arm: Providing and fixing premium quality C.P. brass chrome finish of Shower Arm 400X25X25mm Square Shape for Wall Mounted Showers with Flange complete with all other fittings and fixtures complete including cuttings and making good the walls and floor wherever required as per manufacturers specification and direction of Engineer-in-charge. Jaquar model no- SHA-CHR-455L400 or Equivalent. Each 8.00 0.00 0.00

NS 60 Hand shower with flexible metal pipe 18% Hand shower with flexible metal pipe:-Providing and fixing premium quality C.P. brass chrome finish of hand shower 105 mm dia round shape single flow with air effect (ABS body & Face plate chrome plated) with rubit cleaning system with flexible tube 12 mm dia & 1.5 meter long with nuts with hand shower,with wall bracket for hand shower and all other fittings and fixtures complete all chrome finish including cuttings and making good the walls and floor wherever required as per approved quality & as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar model : HSH-CHR-1715 + SHA-CHR-549D12 + SHA-CHR-555 or equivalant. Each 7.00 0.00 0.00

NS 61 2-way bib cock 18% 2-way bib cock:-Providing and fixing premium quality chrome finish of Two way bib cock with wall flange complete in all respect as per manufacturers specification and direction of Engineer-in-charge. Jaquar model 2-way bib cock ALI-CHR-85041 or Equivalent. Each 9.00 0.00 0.00

NS 62 Angle Valve 18% Angle Valve:-Providing and fixing premium quality C.P. brass chrome finish of angle valve with cover plate for WCs, Wash basin, health Faucet etc as per approved quality 15 mm nominal bore & as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar model : ALI-CHR-85053 or equivalant Each 27.00 0.00 0.00

NS 63 Health Faucet 18% Health Fucet:-Providing and fixing premium quality C.P. barss chrome finish of health Faucet of approved quality and make of the required length of flexible pipe upto the angle cock/two way bib cock, clamp to hold the same, fixing on the wall / Glazed tiles with S.S screws etc complete in all respect as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar model : ALD-CHR-573 or equivalant Each 8.00 0.00 0.00

NS 64 Paper Holder 18% Paper Holder:-Providing and fixing premium quality C.P. chrome finish of Toilet Paper Holder of standard shape and size complete in all respect as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar Model: AKP-CHR-35753PS or equivalent. Each 7.00 0.00 0.00

NS 65 Towel Ring 18% Towel Ring:-Providing and fixing premium quality C.P. chrome finish of Towel ring square with round flange of standard shape and size complete in all respect as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar Model : AKP-CHR-35721P or equivalent Each 8.00 0.00 0.00

NS 66 Coat Hook 18% Coat Hook:-Providing and fixing premium quality C.P chrome finish of coat hook of standard shape as approved quality and colour complete in all respect as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar model : AQN-CHR-7761 or equivalant. Each 8.00 0.00 0.00

NS 67 Towel Rack 18% Towel Rack:-Providing and fixing premium quality C.P. chrome finish of towel Rack of standard shape and size complete in all respect as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar Model : AHS-CHR-1581H or equivalent. Each 7.00 0.00 0.00

NS 68 Tumbler Holder 18% Tumbler Holder:-Providing and fixing premium quality C.P Chrome finish Tumbler holder of standard shape as approved quality and colour complete in all respect as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar model : AQN-CHR-7741 or equivalant. Each 7.00 0.00 0.00

NS 69 Soap Dispenser 18% Soap Dispenser:-Providing and fixing premium quality C.P. Chrome finish of Soap dispenser with glass bottle of standard shape as approved quality and colour complete in all respect as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar model : ACN-CHR-1137N or equivalant. Each 7.00 0.00 0.00

NS 70 Shower basket 18% Shower basket small:-Providing and fixing premium quality C.P chrome finish shower basket of size 300x120x120 mm chrome finish of standard shape as approved quality and colour complete in all respect as per manufacturers specification and direction of Engineer-in-charge. Each 16.00 0.00 0.00

NS 71 Stop Cock with fittings 18% Stop Cock with fittings:-Providing and fixing premium quality CP Brass concelead stop coack chrome finish with fitting sleeve, operating lever & adjustable wall flange with seal with Concealed Body of Flush Cock Suitable for 20mm Pipe Line with Protection Cap of standard shape as approved quality with all fittings and fixtures complete including cutting and making good the walls complete to in all respect as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar model :ALI-CHR-85083K+ ALD-CHR-089R or equivalant. Each 9.00 0.00 0.00

NS 72 SS jali for nahani for toilet with cockrage trap 18% SS jali for nahani for toilet with cockrage trap:-Providing and fixing 5 inch X 5Inch stainless (SS304) matt finsh steel jali (grating) with or without hole consisting four piece system with Cockroach Trap, and frame thickness 1mm & grating thickness 1.5 mm for waste pipe of floor or Nahani trap complete in all respect as per manufacturers specification and direction of Engineer-in-charge. Make : Nirali/Lipka/ Viking/Roca/Jaquar/Kohler or equivalent. Each 20.00 0.00 0.00

NS 73 Hand Dryer 18% Flash touch-free infrared hand dryer:- Providing and fixing Bolt touch-free infrared hand dryer with 1150W rated power & carbon brush motor of size 153X162X280 mm with 1150W rated power , 304 stainless steel shell, Metal housing, durable and environmentally friendly,Compact size, strong airflow and low noise,Dynamic display of power indicator, and all completetd with fitting and fixtures & as per manufacturers specification and direction of Engineer-in-charge. Jaquar Model No-HDR-SSF-AK2803D- Flash touch-free infrared hand dryer with 1150W rated power & carbon brush motor or Equivalent. Each 1.00 0.00 0.00

NS 74 Manual Soap dispenser 18% Manual Soap dispenser :- Providing and fixing wall mounted soap dispenser with push button operated with robust of size 204 x 107 x 108 mm with 1.1 Litre capacity of Quantity dispensed per pulsation 1.0 – 2.0ml with Thermoplastic SAN container suitable for high traffic facilities, white ABS top filling lid to refill with white ABS push button fixing with all fitting complete as per direction of Engineer-In-charge or Manufacturer specification. Jaquar Model No-SDR-WHT-DJ0010FN SOAP DISPENSER - PUSH BUTTON or Equivalent. Each 1.00 0.00 0.00

NS 75 Wall Mounted Paper towel dispensers 18% Wall Mounted Paper towel dispensers:- providing and fixing of stainless steel AISI 304, satin finish Wall Mounted Paper towel dispensers of Size 275x330x133 mm with Manual paper towel dispenser, surface mounted, Robust and vandal-resistant,this dispenser is designed to be installed in any type of washroom, Models suitable for C/Z folded paper towels; in this category, products are available that allow amounts ranging between 400 and 600 towels, Paper tower dispensers are supplied with a lock and special key for opening and screws, especially designed so that the paper can be easily replaced and all completetd with fitting and fixtures & as per manufacturers specification and direction of Engineer-in-charge. Jaquar Model No-PTD-SAP-DT0106CSN- Wall Mounted Paper towel dispensers or Equivalent. Each 1.00 0.00 0.00

NS 76 LED Mirror 18% Full body mirror with inbuilt LED light: Supply & Installation of 5 mm thk diamond clear mirror with edge polishing, single band frosting with warm white LED lights 240 bulbs per mtr in three colour, touch sensor and defogger with 20 x 20 mm anodised slim alumunium frame with one year warranty.The mirror considered for these areas has defogger element as it is in the wet areas. (Mirror Make : Saint gobain / modi guard / equivalent). SFT 52.00 0.00 0.00

NS 77 Sinck cock 18% Sink Cock: Providing and fixing C.P. brass chrome finish of Sink Cock 200 mm heigh with lever operated with all fittings and fixtures complete including cutting and making good the walls complete to in all respect as per manufacturers specification and direction of Engineer-in-charge. JAQUAR Model No : FUP-CHR-29357PM OR EQUIVALENT. Each 2.00 0.00 0.00

NS 78 Wall Mixer 18% Wall Mixer:-Providing and fixing premium quality C.P. brass chrome finish of wall mixer with provision of overhead shower complete with 115 mm long bend pipe on upper side, connecting legs & wall flanges, and all other fittings and fixtures complete all chrome finish including cuttings and making good the walls and floor wherever required as per approved quality & as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar model :FUS-CHR-29273UPR or equivalant. Each 1.00 0.00 0.00

NS 79 Shower Head 18% Shower Head:-Providing and fixing premium quality C.P. brass chrome finsih of Overhead Shower 100mm Round Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System with 17.26 LPM @ 3 bar and all other fittings and fixtures complete all chrome finish including cuttings and making good the walls and floor wherever required as per approved quality & as per manufacturers specification and direction of Engineer-in-charge. Make : Jaquar model : OHS-CHR-1989 or equivalant. Each 1.00 0.00 0.00

TOTAL : Non-Schedule Items-Civil 0.00 0.00

C NON-SCHEDULE ITEMS:ELECTRICAL

NS 80 18% Supplying and erecting LED mirror light with integrated driver including 7W to 9W lamp with polycarbonate housing and opal diffuser to be fixed above mirror or as required on clamps complete .( Murphy 6W 3-IN-1 Rose Gold Finish Mirror Light or equivalent) Each 9.00 0.00 0.00

NS 81 18% Supplying and erecting decorative indoor Wall Mount 2W LED luminaire Fitting wayon up and down light ( Murphy MLAC-FL5OS or equivalent) Each 6.00 0.00 0.00

NS 82 18% Supply, installation, connection, testing and commissioning of LED square / circular 15W down lighter having pressure die-cast aluminium housing, opal translucent cover, mounting arrangement with board for surface type or spring loaded mounting clips for flush type complete. ( Murphy MLDL-CBLS-15CW-1 or equivalent) Each 87.00 0.00 0.00

NS 83 18% Supply, installation, connection, testing and commissioning of LED strip light/cove light/profile light fixed with or without alumunium profile frame and PVC white as per design and requirement or as direction of Engineer-In-Charge. Product specification- Wattage: 24 Watts,LEDs per Meter: 144 LEDs, Slim Design: Perfect for narrow profiles, Uniform Light Output: Enjoy a well-lit space without distractions,Dimmable: Adjust the brightness to your liking,Energy-Efficient: Save on energy costs with long-lasting LEDs,Customizable: Shape and install it as per your unique requirements. ( Philips Slim Edge LED Profile Strip light Product SKU : 929003514101 Warm White or equivalent) Metre 86.20 0.00 0.00

NS 84 18% Supply, installation, connection, testing and commissioning of Exhaust fan of light duty250 V A.C. 50 cycles 225mm. 1400 RPM rust proof body & blades, wiremesh, duly erected in an approved manner and marking .( Havells Ventil Air DX 250mm or equivalent) Each 10.00 0.00 0.00

NS 85 18% Supply, installation, connection, testing and commissioning of Ding Dong / electronic musical type call bell with heavy duty coil suitable to operate on 230V A.C. supply erected on polished double wooden block/sunmica block of suitable size. ( Panasonic Penta Ding Dong Door Bell Or equivalent) Each 7.00 0.00 0.00

NS 86 18% Supplying & erecting 10 pairs x 0.5 mm dia PVC insulated armoured telephone cable 0.9/0.6 sq.mm PVC Sheathed solid tinned copper conductor cable laid in provided trench/ cable tray . Metre 80.00 0.00 0.00

NS 87 18% Supplying, installing, testing & commissioning approved type Push button telephone instrument desk top/wall mount with caller ID unit of approved make . ( Beetel M59 or equivalent) Each 8.00 0.00 0.00

NS 88 18% Supply & installation of 12U wall mounted network rack alongwith all necessary hardware & accessories, etc.complete as required . Each 1.00 0.00 0.00

NS 89 18% Supplying and fixing 24-port Pure-Gigabit L2 Managed Switch, 12 Gigabit SFP slots, 4 Combo Gigabit LAN ports in provided U Rack complete. ( TP-LINK TL-SG5412F or equivalent) Each 1.00 0.00 0.00

NS 90 18% Supplying and drawing co-axial TV cable RG-11 grade, solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit . Metre 120.00 0.00 0.00

NS 91 18% Supply & installation of 4-way Splitter box for TV cable termination including all necessary hardware, accessories, etc. . Each 8.00 0.00 0.00

NS 92 18% Supply, installation, connection, testing and commissioning of 6W LED Study Table Lamp suitable for Table standing. ( Philips Orbit Desk Light 919215850922 or equivalent) Each 7.00 0.00 0.00

NS 93 18% Supply, installation, connection, testing and commissioning of Storage Water Heater 15L - Free Standard Installation & Pipes, 4 Star Rated, Induction Technoloy: 25 % Faster Heating,No Heating element: Scaling Resistant,Saves energy: Rs 30,000 saving in 5 Years Span: 25 % less yearly electricity consumption,Remote Control : Easy operation,Feroglas Coated Inner Container: Provides superior corrosion resistance,Digital Temperature Display: Temperature setting as per comfort,Smart Mode Setting : Auto off & Auto on time, Eco Mode: Optimal bathing temperature with 7 years waranty ( Havells GHWVMGEREW15- Magnatron Prime Storage Water Heater (Geyser) or equivalent. Each 2.00 0.00 0.00

NS 94 18% Supplying, installing, testing and commissioning split type variable speed Inverter technology room Air conditioning unit 1.5 TR capacity with 5 star rating, 4way swing, 5 in 1 convertible cooling , stabilization free operation having ISEER minimum 5.05 suitable to operate on250V, 50 cycles, A.C. supply having 1 no of air handling unit hiwall / floor mounting type complete with refrigerant R410 A/R32 and copper condensor at position. as per technical specifications. (Note copper pipe and cable 3 mtr is included ) extra pipe & cable shall be payble under relivant item ( Blue star IE518PNU 1.5 Ton 5 star, inverter split AC) or equivalent. Set 2.00 0.00 0.00

NS 95 18% Additional 100 % copper pipe (1/2'' & 1/4'') with insulation and 1.5 mm 3core copper cable wire suitable for 1.5 T AC wherever required. Metre 30.00 0.00 0.00

NS 96 18% Supply & fixing of flexible hose pipe of length 1 metre to 1.5 metre suitable to connection with existing fire fighting sprinkle and testing of lekage etc all complete as per direction of Engineer-In-Charge. Each 30.00 0.00 0.00

NS 97 18% Supply & Installation of smoke dedector with commisioon with the main existing pannel all complete as per direction of Engineer-In-Charge. Each 2.00 0.00 0.00

NS 98 18% Supply & fixing of Ceiling mount speaker and integration with existing annoucement system with all complete as per direction of Engineer-In-Charge. Each 12.00 0.00 0.00

TOTAL FOR NON-SCHEDULE ITEMS: (Electrical) 0.00 0.00

Total of Non-Schedule Items (Schedule - II) 0.00 0.00 Sheet OK

Total of Non-Schedule Items incl. GST(Schedule - II) 0.00 Sheet OK

As all the line items are Left Blank the bid is considered as Non-responsive

Renovation of B-Wing of Transit Camp at 7th Floor, RHQ Building, POWERGRID, Secunderabad”

(GRAND SUMMARY)

Bidder’s Name and Address (Sole Bidder) : To:

Name : 0 Contract Services

Address : 0 Power Grid Corporation of India Ltd.,

0 Southern Region Transmission system -I

0 Kavadiguda Main Raod,

Secunderabad - 500080

Sl. No. Description Total Price (INR)

1.1 TOTAL SCHEDULE NO. I

Supply & Installation Charges- Schedule Civil & Electrical Items for Renovation of B-Wing of Transit Camp at 7th Floor, RHQ Building, POWERGRID, Secunderabad” NOT QUOTED

1.2 TOTAL SCHEDULE NO. II

Supply & Installation Charges- Non-Schedule Civil & Electrical Items for Renovation of B-Wing of Transit Camp at 7th Floor, RHQ Building, POWERGRID, Secunderabad” NOT QUOTED

I Total of Service/Installation Charge (ITEMS TAB: Item 01 INSTALLATION FOR DCB (INR) : SRM ATB for BID PRICE SUMMARY Statement ) Non-responsive Bid

GST on Schedule-I 339,143.08

GST on Schedule-II 0.00

Total GST for BID PRICE SUMMARY Statement ) Non-responsive Bid

III GRAND TOTAL Non-responsive Bid

Date : 0 Printed Name : 0.00

Place : 0 Designation : 0.00

Specification No: SR-I/C&M/WC-4644/2026/RFx: 5002005251 (SR1/NT/W-CIVIL/DOM/B00/26/04733) Bid Form 2nd Envelope

BID FORM (Second Envelope)

Bid Proposal Ref. No.

Contract Services

Power Grid Corporation of India Ltd.,

Southern Region Transmission System-I

Name of Contract : Renovation of B-Wing of Transit Camp at 7th Floor, RHQ Building, POWERGRID, Secunderabad”

Dear Ladies and/or Gentlemen,

1.0 In continuation of First Envelope of our Bid, we hereby submit the Second Envelope of the Bid, both of which shall be read together and in conjunction with each other, and shall be construed as an integral part of our Bid. Accordingly, we the undersigned, offer to undertake the above-named package in full conformity with the said Bidding Documents for the sum of Rs. Non-responsive Bid /- only or such other sums as may be determined in accordance with the terms and conditions of the Bidding Documents. In continuation of First Envelope of our Bid, we hereby submit the Second Envelope of the Bid, both of which shall be read together and in conjunction with each other, and shall be construed as an integral part of our Bid. Accordingly, we the undersigned, offer to undertake the above-named package in full conformity with the said Bidding Documents for the sum of Rs. /- only or such other sums as may be determined in accordance with the terms and conditions of the Bidding Documents. Non-responsive Bid

Sch-1 Schedules Items as per DSR 2021 excluding GST

Sch-2 Non-Scheduled Items

Sch-3 Grand Summary

2.3 We declare that as specified in Clause 4.6, ITB, Vol.-IA of the Bidding Documents, the prices of all the Services to be supplied under this contract shall be FIRM and doesnot subject to any price adjustment as per relevant clauses in bidding document.

3.0 We confirm that except as otherwise specifically provided our Bid Prices in this Second Envelope include all taxes, duties, levies and charges as may be assessed on us/our Associate (applicable for Foreign Bidder), our Sub-Contractor/Sub-Vendor or their employees by all municipal, state or national government authorities in connection with the Facilities, in and outside of India.

3.1 100% of applicable Taxes and Duties i.e GST , which are payable by the Employer under the Contract, shall be reimbursed by the Employer on production of satisfactory documentary evidence by the Contractor in accordance with the provisions of the Bidding Documents.

3.3 We confirm that we have also registered/we shall also get registered in the GST Network with a GSTIN, in all the states where the project is located and the states from which we shall make our supply of goods.

4.0 # (For Joint Venture only) We, the partners of Joint Venture submitting this bid, do agree and confirm that in case of Award of Contract on the Joint Venture, we shall be jointly and severally liable and responsible for the execution of the Contract in accordance with Contract terms and conditions.

5.0 We, hereby, declare that only the persons or firms interested in this proposal as principals are named here and that no other persons or firms other than those mentioned herein have any interest in this proposal or in the Contract to be entered into, if the award is made on us, that this proposal is made without any connection with any other person, firm or party likewise submitting a proposal is in all respects for and in good faith, without collusion or fraud.

Thanking you, we remain,

Yours faithfully,

For and on behalf of

Date : 00-Jan-00 Printed Name : 0

Place : 0 Designation : 0

Please provide additional information of the Bidder

Business Address :

Country of Incorporation :

State/Province to be indicated :

Name of Principal Officer :

Address of Principal Officer :

Note: Bidders may note that no prescribed proforma has been enclosed for Attachment 2 : Power of Attorney. Bidders may use their own proforma for furnishing the required information with the bid.