Maintenance of Street Lights High Masts Subways Underdeck and FOB lights on Delhi PWD road SD III PWD EMD South West

Supplying, Installation, Testing and Commissioning of Foam jet High contrast for producing high contrast/foam effect to extensively wind stable, water level independent moc Brass /SS 316L of following size etc. complete as required.

25 mm Dia inlet 32 mm orfice 160 mm long

Supplying, Installation, Testing and Commissioning of underwater Luminaries surface mounted RGB LED spot light 6 x 3W with IP 68 protection, SS/ aluminum dia casting body with power coated paint, soft rubber gasket along with 2 years free replacement guaranty etc. complete as required..

Supplying, Installation, Testing and Commissioning of RGB controller with remote Kit wattage not less than 200 watt i/c connection along with 2 years free replacement guaranty etc. complete as required.

Supplying, Installation, Testing and Commissioning of fixing of Power Supply/SMPS for suitable to run LED Lights, Body-Metal input Power-220 V AC/ Output Power-12 V DC etc. complete as required.

Supplying, Installation, Testing and Commissioning of three phase open well ISI Marked submersible pumpset of 1.5H.P. capacity suitable for operation on 415V(+-10%), 3- phase AC supply compatible for operations on dynamic variable frequency / speed having IP 68 Protection including providing required no's of heavy duty M.S clamps made of flat iron and suitable size top cover made of suitable thick MS sheet as required. and making of flexible IP68 cable connections etc. complete of suitable head and discharge etc. complete as required.

Supplying, Installation, Testing and Commissioning of fixing of following dia. Gun metal gate valve (Screwed type) on the existing pipeline, including testing & Commissioning etc. complete as required..

Supplying & fixing PVC insulated PVC sheathed copper conductor submersible flat cable ISI Marked in existing metal/ HDPE / PVC/ pipe/ in bore well/ in sump including fixing the cable to GI/HDPE pipe with suitable cable tags of following sizes etc. complete as required.

4core X 2.5 sq mm size

Supplying and Making water Proof joint of underwater cables for submersible cable complete as per direction, instruction and entire satisfaction of Engineer-in-charge.

Supply of UPVC pipes (10 Kgf/cm2) of make supreme / Prince or equivalent confirming to IS 4985:2000 including all UPVC fitting tested to a test pressure of 10 Kgf/sqcm i/c jointing with good quality solvent of following sizes.

50 mm OD Pipe

32 mm OD Pipe

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

LED Flood Light, powder coated pressure die cast aluminium (System lumen efficacy ≥105 <120 lm/Watt). Supplying, Installation, Testing & Commissioning of Flood Light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC as per CISPR -15, lenses for beam angle 30 deg-120deg as per the application and the project requirement., suitable tilt able fitting, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin) , SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output .LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).

SITC of weather proof pole box inside existing CC Foundation made out of hot moulded SMC sheet with clamp /fastner neutral link strip, gland thimble and 1 No. 6 Amps SPMCB Complete with inter connection with copper wire, earthing.

(Box Size - 155 mm x 155 mm x 100 mm)

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 4930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.

63 mm dia (OD-63 mm & ID-51 mm nominal)

Fabrication, supplying and installation of outdoor type cubical Feeder Pillar of depth not less than 30 cm, made out of M.S sheet 2 mm thick (14 SWG) duly compartmentalized having 4 strip aluminium bus bar of minimum 300 Amp., and having following accessories mounted inside the cubical panel board i/c making connection, interconnection with aluminium thimbles, earthing with two nos, earth studs duly painted with one coat of red oxide & two coats of superior quality enamel paint complete etc. as required. (For One no. Panel)

Providing & Fixing of following electrical accessorries/switches etc in the above existing panel board including making connection testing, commissioning etc. complete as reqd.

250 A,50KA,FPMCCB (Ics=Icu=100%) Incoming

100 A,30KA,FPMCCB (Ics=Icu=100%) Outgoing

63 Amp TPN MCB

63 Amp DP MCB

Digital Timer

Power contactor 110 A (ML-6 Similar)

LED Indicator Lamp

Danger Plate

Earthing with G.I. earth pipe 4.5 Meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Running operation & maintenance i/c watch and ward of following Fountains installed at PWD Roads i/c cleaning the sump, repairing electrical & mechanical faults of pump sets, electrical panels and fittings / fixture / waterline / LED fittings, cleaning of Nozzle for smooth functioning of fountain etc. Complete as required and as per direction of Engineer-in-charge 1) Bowl Fountain - 02 Nos. (Near Hayatt Hotel, R K Puram) 2) Bowl Fountain - 01 No (Near T1 Pump House.) a) Operator -2 Nos. (In two shift) (One no in each shift) (6 AM to 2 PM & 2 PM to 10 PM) (For all days i/c sunday and holidays)

Supplying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade aluminium armoured cable of following size complete as required.

4 x 6 Sq.mm