Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.9 LAccepted-AOC | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹41.9 L+₹5.3 L (14.4%)Rejected-AOC NEAR PAYAL CINEMA P O SEVOKE ROAD SILIGURI 734 001 | DARJEELING | WEST BENGAL | 734001 | L2 | Rejected-AOC Rejected being L2 |
Tender Value
₹34.5 L
EMD Value
₹68,920
Closing Date
23 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 867 EWS
GE 867 EWS C/O 99 APO PIN-913867
SPL REPAIR TO BLDG NO T-93 AT KALIMPONG UNDER GE 867 EWS
2023_MES_610161_1
GE/867/TOKEN/10 OF 2023-2024
Open Tender
Civil Works
Item Wise
180 days
KALIMPONG
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE 867 EWS
₹68,920
10 Nov 2023
21 Jul 2023
26 Aug 2023
21 Jul 2023
23 Aug 2023
4 Aug 2023
21 Jul 2023 - 1 Aug 2023
Amount
Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings sheets in roof all as specified and directed by Engr-in-Charge
S&F Pre- painted galvalume aluminum zinc coating GI based steel sheet of approved profile of corrugation, 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws all as specified and directed by Engr-in-Charge.
S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering, eaves board, ridges, hips,valley gutters, drip and straight flashing cladding to wall etc, fixed with self tapping screws all as specified and directed by Engr-in-Charge.
Dismantling cast iron work (Steel and iron) of any description, completed all as specifed and directed
S&F of joist, channel, angle, flat iron or Tee sections, fixed independently with connecting plates, etc confirming to Fe 410-W (Gde 250 quality A) complete all as specified and directed.
Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness including cover fillet complete all as specified and directed.
Dismantling timber scantlings 40 Sqcm and over in section, in any position (framed work) all as specified and directed.
Dismantling timber fillets, rails, posts rafters purlins etc under 40 Sqcm in section fixed in any position (unframed work) complete all as specified and directed.
S&F false ceiling with powder coated exposed GI grid suspension system (E-Grid T-2430 or equvalent load carrying capacity with mid span deflection not exc. 1/360 span with hanger spacing of 1200mm c/c) consisting of main runner 3600mm long, cross Tee 1200mm/600mm long and wall angle. The main runners to be placed @ 1200mm, the cross Tee 1200mm will be inserted in the pre cut slots of main runner at a regular interval of 600mm to form a modular grid of 1200mmX600mm. Additional cross Tees of 600mm shall be placed perpendicular to the cross tee 1200mm long to finally form a grid of 600mmX600mm. Suspensor system (Grid) made out of GI sheet main Tee of size 23.5mmx38.50mmX0.36mm and cross Tee of size 23.5mmX23.5mmX0.36mm and angle size 19mmx19mmX0.36 mm. Grid of modular size 600mmX600mm shall be supported by 4 mm dia G.I. wire from purlins/soffit with and including 4mm thick high pressure steam cured non asbestos fiber cement designer ceiling board (Density>1200Kg/Cum) of size 595mmX595mm, confirming IS 14862 & Type B Category III of ISO 8336, tested as per AS 1530 part 3 & BS-476 Part 4, 5, 6, 7 & 8, complete all as per manufacturer's instruction. (Make : Everest or equvalent as approved by GE)
Dismantling boarding, any description, fixed in any position with nails all as specified and directed by Engr-in-Charge
Dismantling Brickwork or stone/ boulder masonry, for portions ordered to be dismantled , built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
M & L for Modular bricks in cement mortar with fly ash bricks, straight or curved on plan exc 6m mean radius, setting in CM (1:6) Complete all as specifed and directed by Engr- in charge.
Taking down cement plaster on brick or stone masonry surfaces of walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for 15 mm thick rendering on fair faces of brick work or concrete sur face, in cement mortar (1:6) on , rendering finished fair and even complete complete all as specified and directed.
M&L 15 mm thick rendering on fair faces of brick work or concrete surface in cement mortar 1:4 on external wall finished even and fair mixed with integral water proofing compound @ 3% by weight of cement or in the manner specified by the manufacturer and in the proportions indicated all as specified and as directed. Note:-WPC will be measured and paid separately as supply only.
Supply only integral water proofing compond all as specified and as directed.
M&L preparation of new plastered or unplastered surfaces of walls, applying two coats of oil emulsion distemper over a coat of Chalk whiting, on plastered surfaces, prepara-tory to distempering over 1mm thick wall care putty on wall, complete all as specified and directed.
M&L complete removal existing treatment and applying two coats of oil emulsion distemper over a coat of Chalk whiting, on plastered surfaces, prepara-tory to distempering over 1mm thick wall care putty on wall, complete all as specified and directed.
M&L for preparation on newly plastered / previously untreated surfaces of wall for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces including 2mm thick wall care putty on wall complete all as specified and directed.
M&L complete removal of existing treatment and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces including 2mm thick wall care putty on wall complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing rubbish off the complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick premium quality conforming to IS-13712, grade B-II(a) (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 20 mm thick screed bed in cement mortar (1:6) complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick premium quality conforming to IS-13712, grade B-II(a) (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm on vertical surfaces such as dado/skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 10 mm thick backing coat in cement mortar 1:3 complete all as specified and directed.
M&L for non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 20mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.
M&L for glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/450x300x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, including including 15mm thick rendering in CM (1:3) complete all as specified and as directed
M & L Granite (of any type) work 20MM thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 20mm thick screed bed in CM (1:6) complete all as specified and directed by Engr - in - Charge.
All as per item ser No 27 here-in before but on vertical surfaces such skirting/ dados etc including 15mm thick rendering in CM (1:3) all as specified and directed by Engr-in-Charge
M & L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 20mm thick screed bed or bedding layer in CM (1:6) complete
M&L for machine cut Kota stone slab as in vertical surfaces such as dado/skirting, 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing and exposed edges of Kota stone shall be rounded complete over and including 15 mm thick rendering in CM (1:3) finished even and rough all as specified and directed.
Demolition of cement concrete (un reinforced) in ground floor & paving not exceeding 15 cm thick below or above ground level all as specified and directed by Engr-in-Charge
M&L for 75 mm thick PCC (1:3:6) type C-2 using 40mm graded crushed stone agg as in plinth protection/ path laid slope of 1 in 12 and finshing cement concrete surface even and smooth without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering of exposed edges or as directed by Engr -in-charge.
M&L for PCC (1:3:6) type C-2 (using 40 mm graded crushed stone aggregate) as in surface channels, drains including all necessary form work complete all as specified and directed.
M&L extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed.
Add or deduct extra for forming fair finished , for each 33 mm girth or part thereof over or under 30cm ditto, complete all as specifed.
M&L for PCC (1:3:6) type C-1 (using 20 mm graded crushed stone aggregate) asin lintels upto 1.5m clear span,cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, hold fast, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed.
Taking down chowkhats or frame not exc 1.50 sqm each with shutter (without taking off shutters from the frame) complete all as specified and directed.
Taking down chowkhats or frame exc 1.50 and not exc 4 sqm each with shutter (without taking off shutters from the frame) complete all as specified and directed.
S&F pressed steel frame of size 125 x 60mm for door with one or more rebates including necessary fixing, lugs, hinges,lock ,strike plate, etc complete all as specified.
S&F pressed steel frame of size 105 x 60mm for door with one or more rebates including necessary fixing, lugs, hinges,lock ,strike plate, etc complete all as specified.
S & F 40mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides with decorative face veneer with lipping/frame to match complete all as specified and directed.
S&F 35 mm thick (batten thickness) Glazed and skeleton shutters using second class hard wood, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats
S&F 35 mm thick second class hard wood , plain, framed panelled shutters (any number of panels), with panels of 12 mm thick timber flat on both sides (feather edged), or of 12mm thick veneered particle board medium density wood particle board with commercial face veneers complete all as specified and directed. Note :- The dimension of the various components or parts of shutters shall be as specified in clause 8.24 (a) of MES SSR 2009 Part I
Taking down shutters of any description exc 1 sqm and n exc 2 sqm each and refixing in same opening after Resecuring or easing & adjusting complete all as specified.
Taking down shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and directed.
S&F of solid PVC door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube as per specification and drawing given in clause 8.B.3 of SSR -2010 (Part-II Rates) complete all as specified and directed.
S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing given in clause 8.B.2 of SSR -2010 (Part-II Rates) complete all as specified and directed.
S&F steel window with side hung shutter, including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.
S&F steel window with side hung shutter, including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.
S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete complete all as specified and directed.
S&F steel window or ventilator fixed type with glazing bar complete complete all as specified and directed.
S&F mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars,barred iron doors, ladders, framed balusters, walk ways, railings and similar work confirming to Fe-410-0 or Fe 310-0 complete all as specified and directed.
S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and directed by Engr-in-Charge
S & F 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane
S & F 4mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.
S&F 100 mm size butt hinges, medium weight , stainless steel complete all as specified and directed
S&F of 150 mm long aluminium, anodised, barrel tower bolt, of extruded section and fixed all as specified and directed.
S&F 150 mm size Aluminium handles, cast type, anodised and all as specified and directed.
S&F of 250 mm long aluminium alloy, anodised sliding door bolts with haps staple(bolt type), and fixing clips of sheet, cast or extruted sections and fixing bolt and sliding bolts of extruted sections or cast aluminium alloy and fixed complete all as specified and directed.
S&F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered , put together with glue, pinned at joints complete all as specified and directed.
M&L preparation of new wooden surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L preparation of old wooden surfaces of any description over 10 cm width or girth not otherwise described and applying one coats of synthetic enamel paint ,complete all as specified and directed.
M&L preparation of old steel surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.
S&F in repair of PVC low level flushing cistern 10 Ltr capacity, valveless syphonic action type complete with inlet, ball valve, float valve, bends brackets, rawl plug, brass screws handle etc complete having BIS description mark with IS-2731 with and including suitable size of MS brackets, plug, screw all as required incl taking down existing high level/low level flushing cistern any type disconnecting pipes and jointing with new one etc, and making good the floors/walls as per existing floor finish/wall finish including 32 mm bore PVC flush pipe and jointing with water closet of any type all as specified and directed.
S&F in repair vitreous china wash down water closet pan (pedestal pattern) white fixed in repair (excluding flushing cistern and flush pipe) incl Plastic water closet seat, black/white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device with recessed bottom complete all as specified..
S&F in repairs vitreous china wash basin white of any pattern, flat back of size 550mmx400mm (excluding taps), waste, chain and plug including waste pipe ,suitable size of brackets and making good the damaged walls as per existing wall finish complete all as specified and directed
S & F in repair pillar tap Fancy Type cast copper alloy 15mm bore with capstan head, chromium plated, screwed down high pressure, with "Hot" or "Cold" with long screw shank and fly nuts, screwed for iron pipes.
S&F 32 mm dia Waste fittings (Waste cuppling), brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed
S&F 32 mm dia low density polyethylene (LDPE) pipes of pressure rating 6 Kgf / sq.cm complete all as specified and directed
S&F PVC connection pipe 15 mm size with PTMT nuts of length 600mm complete all as specified and directed.
S&F in repair brass chromium plated tubular towel rail of 20mm dia D' type 60cm long between flanges complete all as specified and directed.
S&F in repair Toilet paper holder with flat recessed type stainless steel or brass, chromium plated fixed to walls with chromium plated (CP) brass screws, completed all as specifed .
S&F in repairs Grating doom 100mm dia of PTMT (Minimum weight 25gms) all as specified and directed by Engr-in-Charge
Taking up or down 15 mm bore old steel tubing and connections, including disconnection of fittings and removal from site complete all as specified and directed.
S&F for GI tubes medium grade, 15mm bore, with all fittings, fixed to walls, ceiling or laid in floors including taking up or down steel tubing and connections, cleaning for refixing or removal to store etc complete all as specified and directed.
M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth on stone walls complete all as specified and directed.
Taking up or down 20 mm bore old steel tubing and connections, including disconnection of fittings from tubing including cleaning for re-fixing or removal from site complete all as specified and directed.
S&F 20 mm bore tubes medium grade galvanised with and incl all GI fitting (such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug etc ) and fixed complete to wall and ceiling or laid in/on floor complete all as specified and directed,
S&F in repair Soap dish, CP, fixed to plugs with chromium plated brass screws complete all as specified and directed
S&F in repair 15 mm bore stop valve fancy type, chromium plated with long shank and cup, screwed both ends for iron pipe or for unions complete all as specified and directed
S&F in repairs, bib taps, 15mm, fency type chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed comple all as specified and directed.
S& F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.
S&F in repairs 75 mm size PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.
S & F SWG gully trap size 150 x 150 mm square or round mounted type ‘S’, setting and jointed with solvent cement complete all as specified.
Demolition and breaking up old broken , PVC (SWR) , Cast Iron, AC, SWG soil waste and vent pipe of 75/100mm bore including accessories set in cement mortar and removing rubbish from site as directed by Engineer-in-Charge complete all as specified and directed.
S&F of 110 mm PVC (SWR) drain pipe single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
S&F of 75 mm PVC (SWR) drain pipe single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
S & F of 110mm bore PVC (SWR) Vent cowl complete all as specified and directed by Engr - In- Charge.
S&F of 75 mm bore PVC (SWR) bend any radius complete all as specified and directed.
S&F of 110 X 75 mm bore PVC (SWR) reducer including jointing with solvent cement complete all as specified and directed.
S&F of 75 mm bore PVC (SWR) vent cowl including jointing with solvent cement complete all as specified and directed.
S & F of 110mm bore PVC (SWR) bends complete all as specified and directed by Engr - In- Charge.
S & F of 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed by Engr - In- Charge.
S & F of 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed by Engr - In- Charge.
S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position or in pipe etc. complete in all respect as specified.
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed.
M&L for 75mm thick Cement concrete (PCC) (1:3:6) (40mm graded aggregate) Type C2 of as in sub base complete all as specified and directed..
M & L for screed bed or bedding layer in Cement Mortar (1:6) of 20mm thick for laying floor finishes complete all as specified and directed by Engr - in- Charge.
M&L for coloured & polished Chequered cement concrete tiles 30cm x 30cm x 25mm thick,set, jointed and pointed in neat cement slurry with pigment complete all as specified and directed by Engr - in - Charge.
S & F in repair vitreous China Urinal, Half stall type, Fixing only in new work or refixing in old, white (excluding flushing cistern, flush pipe and waste pipe), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe complete all as specified and directed.
Taking down shutters of any description n exc 1 sq. m each complete all as specified.
S&F in repair of vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) all as specified and directed.
S & F for 6mm thick Plywood grade BWR, type BB , No. of ply 05, completed all as specifed and directed
M & L for Weather boarding ( Hardwood 2nd class), clean sawn, plain, 20mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm lap complete all as specified and directed.
S & F in rapair brass chromium plated shower rose 125mm size with or without swivel joints any size, including fixing to steel pipe or union, all as specified or directed by engr - in - charge.
S & F in repair for Brass CP mixer for mixing hot & cold (Wall Mixer), water screwed down for iron pipe and fixed with 15mm bore pipe, completed all as specified and directed .
S & F in repair for Brass CP mixer for mixing hot & cold ( WHB Mixer), water screwed down for iron pipe and fixed with 15mm bore pipe, completed all as specified and directed .
Taking down copper/aluminium point wiring (light fan, Socket or power ) Complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, light fitting etc, removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of wall, floors, etc. as directed by the Engineer – in - Charge.
Disconnection and taking down distribution boards, switch fuse unit, , enclosure for MCB including MCB's of any type and size and keeping aside for reuse of serviceable one.
Material and labour for point wiring with 1.5 Sqmm (nominal area) PVC insulated un - sheathed single core multi stranded copper conductor FRLS cable 1100 volts grade (conforming to IS) drawn through and including rigid non metallic PVC conduit not less than 20mm size dia, medium grade with all necessary fittings, concealed wiring , for light / E/fan/Bell point controlled by one switch including 1.5 Sq mm PVC insulated copper stranded conductor for earth continuity conductor and connected to earth dolly and to be terminated in 1.6 mm thick pressed steel terminal boxes (concealed type in permanent bldg and surface in temporary bldg or as directed ) for mounting fittings like switch, socket, fan regulator etc. with 3 mm thick laminated bakelite sheet cover ,for housing switches, socket outlet, regulator etc. complete all as specified or directed including testing on completion.
All as per item No 112 here – in – before but for one 3 / 5 -pin switch socket outlet 5 amps on independent board.
All as per item No 112 here-in-before but One 3 pin socket outlet 5 Amps on the same board with other switchs with cables 1.5 Sqmm size.
All as per item No 112 here – in – before but for one switch socket outlet 15 Amps on independent board with 2.5 Sqmm multi stranded and 2.5 Sq mm stranded (for earth) PVC insulated un-sheathed copper cable.
Supply and fix switch piano flush button, single pole, 5 amps, one way all as specified and as directed.
Supply & Fixing ceiling rose surface bakelite 65 X 50 mm three terminal all as specified and as directed.
Supply and fix switch socket combination 2 – in – one, 3 Pin / 5 Pin, 5 amps flush type all as specified and as directed.
Supply and fixing switch socket combination 2 – in – one 6 Pin , 5 / 15 amps flush type universal all as specified and as directed.
S & F Energy efficient LED tube light fitting 4", 1x22 watt, with bipin holders, connector block, CCT - 6500K, system output lumen not less than 2000lm, extruded aluminium housing with high quality Polycabonate diffuser, wide voltage protection range 140V-270V including connecting up with PVC insulated 3 core sheathed 0.5 sqmm copper conductor two numbers PVC mounting blocks for fixing of fitting complete all as specified and as directed by Engineer-in-charge. Make : Philips, Model - TMC 501, TMC 501P 1XT-LED 22W P3241 or equivalent in Crompton/Havells.
Supply, Fixing, Testing & Commsioning of IP66 & IK09 integral LED Bulk Head luminaire with housing made of Pressure Die Cast alumunium & Optical cover made of Opal Polycarbonate for glare free lighting . System Lumen Output of minimum 600 lumens. Power Consumption should not exceed 10W (Including Driver Loss). For Glare free lighting luminaire should be with Opal diffused Polycarbonate. Make : Philips, Cat part No. "WT 202W LED 6S CW PSU S2 PC", Color temperature 6500 K, CRI >80, Housing - High pressure die cast aluminum, Mounting - Surface, THD < 20%, PF >0.9, Operating voltage range 120V-277V AC. Submission of LM80-08 for LED source & LM79-08 for Luminaire from third NABL Accredited Lab / UL mandatory including connecting up with 3.0 core, 0.5 sqmm copper conductor sheathed as specified and directed.
Supply and fixing wall mounted LED luminare, 1x 10 watts with glass shed, prewired with holder, including one 10 watts LED lamp, Modle Endura Rugby New 10W Cat No- LHEOAOP7PZ6W010 Make- Havells or equivalent model of Philips/Bajaj / Crompton.
Supply and fixing lamp holder insulated body with back plate for batten fitting all as specified and as directed.
S & F in LED retro fit lamp B-22 holder base with poly carbonate body and aluminium heat shrink of 5 W complete with tube rod all as directed.
Supply and fixing Sheet metal enclosure for MCB TPN DB’s, Phosphatised Powder Painted Double door 200 amp rated, Triple pole and neutral link of 4 way 415 volt AC all as specified and directed by Engr-in-Charge . Make- Legrand/Siemens/Schindler.
Supply and fix MCB, Tripple Pole & Neutral, 40 to 100 Amps, 415 volts, 50 Hz, 10kA complete all as specified and directed by Engr-in-Charge. Make- Legrand, Siemens, Schinder, Havells.
Supply and fixing Sheet metal enclouser Double door for MCB DB,s Phosphatised Powder Painted with bus bar 200 Amps rated Single pole and neutral linkof 8 way 240 Volts AC. Make- Legrand/Siemens/Schindler.
Supply and fixing MCB Single pole and neutral upto 32 Amps capacity 10 KA 240 Volts 50 HZ. conforming to IS/IEC 60898-1 2002, integrated label holder, Sliding bottom clamp, IP 20 protection, Make- Legrand, Siemens, Schinder, Havells.
Supply and fix MCB single pole (SP), 10 kA of 5 Amps to 32 Amps capacity 240 Volts. conforming to IS/IEC 60898-1 2002, integrated label holder, Sliding bottom clamp, IP 20 protection, Make- Legrand, Siemens, Schinder, Havells.
M&L for sub main wiring along with earth wire of size two run of 6 sq mm + one run of 6 Sq mm earth wire single core PVC insulated FRLS cable with stranded copper conductor FRLS including drawing into 25 mm rigid non-metalic PVC conduit concealed in wall.(Note Two run of 6 Sqmm and one run of 6 Sqmm wire including one run of 25 mm dia cunduite shall be measured as one unit length including taking down of old servicible sub main wiring.
Taking down carefully electric storage type water heater (Geysers) of any make and any capacity from its mounting place opening for servicing, inspection compete including back plate, heating element, inner copper tank etc, de-scaling back plate and heating element by cleaning with Sulfuric acid/ de-scaling compound painting outer body and re-assembling of Geysers after repairs carrying out and re-fixing in same position including replacement of old nuts, bolts and rubber gasket etc, complete all as specified and as directed by the Engineer-in Charge. Note :- Any type of rubber gasket , rubber washer, screws , insulating tape required shall be deemed to be included in the quoted rate.
Supply and fixing Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type all as specified and as directed.
Supply and fix switch piano flush button, single pole, 15 amps, one way all as specified and as directed.
Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm buried directly in ground ( earth pit not less than 2.25 m deep bellow ground level ) with top edge of the plate not less than 1.5 m bellow normal ground level, connected to galvanized earth lead wire 4 mm dia. by means of galvanized iron or steel bolts , nuts , check nuts and washers, and connected to equipments as directed , including funnel with GI med grade watering pipe 20 mm bore , wire mesh , charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode , with concrete pit in PCC (1:3:6) type C-1 , 50 mm thick pre cast RCC (1:2:4) type B-1 cover slab reinforced with 8 mm dia deformed bar 15 cm C/C and suitable handle of 10 mm dia round bar ,GI medium grade pipe for earth lead protection including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance n.exc. 50 m and necessary testing complete all as shown on electrical plate No. 3 of MES SSR Part-I complete all as specified and directed.
Taking down existing exhaust fan and keep in safe custody to the MES store and refixing the same all as directed and specified by Engr in charge.
M&L in repairs for sub main wiring along with earth wire of size two run of 4 sq mm + one run of 4 Sq mm earth wire single core PVC insulated cable with stranded copper conductor FRLS including drawing into 25 mm dia rigid non-metalic PVC conduit concealed in walls/ceilings.(Note Three run of 4 Sqmm including one run of 25 mm dia conduite shall be measured as one unit length including taking down of old servicible sub main wiring.
Note: In case doubling/duplicancy of BOQ items , the lowest quoted rate shall be applicable for payment.
SCHEDULE OF CREDIT
Janata Enterprises
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .