INTERNAL PERIODICAL AND ASSOCIATED MAINT WKS LIKE JOINERY WORK, TILING WORK, PLUMBING WORK ETC TO CERTAIN BLDGS IN DID LINE, NC HUT, OFFRS MD ACCN IN THE AREA OF AGE B/R-II UNDER GE (EAST) DELHI CANTT-10

Amount

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc.

M&L for 10 mm thick cement plaster in cement mortar 1:6 on brick or concrete surface etc. on wall finished even and fair extra cement, all as specified .

M&L for 15 mm thick cement plaster in cement mortar 1:4 on brick or concrete surface etc. on wall finished even and fair without using extra cement, all as specified .

M&L for 10 mm thick cement plaster in cement mortar 1:3 on brick or concrete surface etc. on ceiling finished even and fair without using extra cement, all as specified .

M&L for Non-Skid coloured ceramic tiles 6 to 7mm thick (square/rectangular) area of each tiles exceeding 0.11Sqm but not exceeding 0.18 Sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and incl 15mm thick screed bed in cement mortar 1:6 including incl dismantling floor, hearth or wall tiling including cement mortar bedding (but notbacking), and removing rubbish off the premises complete all as specified and as directed.(Make-Kajaria,somany,orient bell)

M&L for 1st/Premium quality glazed ceramic digital coloured tiles with highlighter of size 300x 600x 7 mmthick as in vertical surfaces such as skirtings, dados etc set & jointed in neat cement slurry & pointed with white or coloured cement to match the shade of tiles laid over and including 10mm thick rendering in cement mortar 1:4 including dismantling of old tiles with backing,and removing rubbish off the premises complete all as specified and as directed complete all as specified and as directed.(Make-Kajaria,somany,orient bell)

M&L for Vitrified coloured ceramic tiles light shade 10mm thick (square/rectangular) polished, area of tiles not exceeding 0.36Sqm each in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in cement mortar 1:6 including dismantling of old tiles with backing,and removing rubbish off the premises complete all as specified and as directed complete all as specified and as directed.(Make- Kajaria,somany,orientbell)

M&L for Vitrified coloured ceramic tiles light shade 10mm thick (square/rectangular) polished, area of tiles not exceeding 0.36Sqm each as in vertical surfaces of dados/skirtings/sides of pillars etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick backing layer in cement mortar 1:4 including dismantling of old tiles with backing, and removing rubbish off the premises complete all as specified and as directed complete all as specified and as directed.

S&F in repair 25mm dia Stainless steel curtain rod with of superior quality including SS end bulbs and SS brackets fixed complete all as specified

M&L for preparation of Internal wall surface old/new by complete removal of existing treatment of walls for upto 4 storey buildings by mechanised sander of Berger Paints or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools as required and applying a layer of 1mm thick wall care putty, again sand papering thus making surface smooth and applying one coat of primer and applying two coats of interior grade acrylic emulsion paint premium quality on surfaces complete all as specified and directed by Engr-in-charge. Note : Final finishes to be applied with roller.

Preparation of old decorated internal wall/ceiling surface by sand paper of required sizes, filling in wall care putty in potholes existing or created again sand papering thus prepairing surface smooth to recieve further finishes complete all as specified and all as directed.

Applying two coats of oil bound distemper on wall surfaces complete all as specified and directed. (Note : Finishing coat to applied with roller).

Applying one coats of Oil Bound distemper on ceiling surface complete all as specified and directed. (Note : Finishing coat to applied with roller).

Applying one coats of Smooth Acrylic Emulsion on ceiling surface complete all as specified and directed. (Note : Finishing coat to applied with roller).

Preparation of old painted wood or wood based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.

Preparation of new wood or wood based surfaces of any description over 10cm width or girth and applying twocoat of synthetic enamel paint, over a coat of primer complete all as specified and as directed.

Preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.

Preparation of new steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed.

S&F in repair Wall mixer 3 in 1 inlet system with provision of both shower (hand shower and over head shower) complete with suitable long bend pipe connecting leg ,CP flange etc complete all as specified and as directed.

S&F in repair Sink mixer with regular swinging spout (wall mounted model ) with connecting legs & wall flanges) for 15 mm bore, fixed in repairs, complete all as specified and as directed.

S&F in repair fancy type angle Stop valves cast copper alloy chromium plated screwed down, high pressure, with crutch or butterfly handles, screwed both ends for iron pipes or for unions, 15mm dia of pipe, complete.

Cutting chases pinning in making good to facing where required for concealed water tubing and making good cutting not exc 10cm girth in brick walls complete.

Taking up or down steel tubing and connections 15mm bore complete.

Taking up or down steel tubing and connections 20mm bore complete.

M&L Steel water tubes, medium grade, ISI marked, galvanised, 15mm bore with all fittings, fixed to walls and ceiling or laid in floors complete.

All as per Srl item No but 20mm bore complete.

S&F in repair PVC (Plastic polymer Cistern) valve less, Symphonic action type, flushing cistern of capacity 10 liters, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete

S&F in repair vitreous china wash down water closet pan pedestal pattern white including connection in drain and in flushing pipe complete including 'P' or 'S' trap complete all as specifed and directed.

S&F in repair Plastic water closet seat cover black/white closed pattern with flat bottom and cover and mild steel chromium plated hinging device, fixed in repairs complete.

S&F in repair fancy type chromium plated long body Bib taps cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule 15mm bore icluding CP wall flange complete

S&F in repair Center hole basin mixer 15mm dia chromium plated brass with costed swinging spout including plugging and securing to walls,complete.

S&F in repair CP , tubular towel rail 60cm long fixed with and including CP brass screws and wooden /plastic cleats complete

S&F PVC connection 15mm dia and 600 mm long with 2 Nos PTMT nuts, in repairs complete.

S&F in repair looking mirror of size 600mmx450mm mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plug with chromium plated brass screw and cup washer including first class hardwood beading 20 mm wide on sides including polishing complete all as specified and directed.

S&F in repair PVC (SWR) floor trap, plain with grating (waste hole/plain type) including jointing with solvent cement, 75 to 100 mm mm diameter of outlet, all as specified.

Cleaning and removing all scale and dirt, etc from water tanks of capacity exceeding 500 but n.exc 1000 ltrs and from mouth of circulating pipes with suitable chemical or solvent as per manufacturer's instruction duly taking care not to damage etc including disconnecting, reconnecting & refixing water tanks in position complete.

S&F in repair Glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specifed and directed.

S&F in repair Corner Glass Shelf of size 225mm x 225mm including screws and bracket fixed in position, complete all as specified and as directed

S&F stainless steel peg set (set of 06 hook) fixed with screw and PVC gutty on wall in position as per sample kept in GE office complete all as specified .

Dismantling water tanks exc 500 but n exc 1000 Ltrs capacity and removing to store.

S&F tripple layer Rotational moulded HDPE Water Storage Tanks 500 ltrs capacity (cylindrical vertical with closed top) hoisted including threaded type lid and fixed in position completeall as specified in SSR Part I etc complete.(Make- Syntex)

ditto as above but 1000 ltr capacity complete all as specified and directed(make- syntex,SPL,Plasto)

S&F in repairs Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore (minimum weight 210 gms), complete.

S&F in repair Gun metal gate valve with iron wheel head screed both ends for iron pipe and fixed 20mm bore complete

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 sqm each complete all as specified

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each complete.

Taking down shutters of any description n .exc 2 Sqm each complete.

Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing; frame work for water tanks and similar work conforming to Fe 290 Gde-E-165 including dismantling of old steel work all as specified and as directed by Engr-in-Charge.

S&F 105mm x 60mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed as per SSR Part-I complete all as specifed and directed by Engr -in- Charge.

S&F 125mm x 60mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed as per SSR Part-I complete all as specifed and directed by Engr -in- Charge.

Factory made, 2nd class hard wood,35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass / gauge etc. (without sash bars) edges or framing plain, chamfered or rounded fitted with cut or mitered beads for securing glass etc. size of members of shutters as specified in SSR Part - I section 8.20 (a), all as specified and directed by Engr-in-Charge.

Factory Made flush shutter 30 mm thick solid core construction with block board core and ply wood faced pannels commercials type on both sideswith decorative rubber beading complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet re-inforced with MS square tube in opening as per specification and shown on drg SSR Part-II 2004.

S&F, factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain cover PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rails lock rail and bottom rail on either side & as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement coplete as per specification and shown on drawing SSR Part-II (2020).

Aluminium alloy powder coated (50micron) anodised auminium door frame section 100xmm x 44mmx2mm thickness ,shutters of aluminium section ofsize 85mm x44mm x2mm thick Top rail and both styled of size 100 mmx44mmx2mm thick lock rail and bottom rail of xize 115mm x 44mm x2mm thick incl aluminium anodised snap beading and rubber packing & 5.50 mm thick froasted designer glass (as approved by GE) incl 100 mm long alm butt hinges 04 Nos each leaf 200mm long tower bolt, 200 mm long fancy ryper alm handle -02 Nos on each leaf ,4 lever brass 100mm long mortice lock & double action floor door spring heavy duty suitable to 1M wide shutter for each leaf, complete all as specified and as directed.

S&F aluminum anodised powder coated grill section 5 to 6 mm of square/diamond shape having pitch size of mesh 75x100 mm etc complete all as directed.

Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) (A) Area not exceeding 2.00 sqm each

S&F Ist class hardwood as small fittings n exc 200cu cm each such as brackets of any type , latch and hinge blocks, shaped door and window stops and the like incl, all necessary labours and butt hinge of size 40mm complete all as specified as directed.

S&F MS butt hinges 100mm long medium weight cold rolled mild steel etc

S&F aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt, all as specified .

Extruded aluminum alloy handle, fabricated type, anodized 125mm size, fixed in repairs complete.

S&F Aluminium alloy, anodised, sliding door bolt 200mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete.

150 mm, Mild steel ordinary rat tail rod pattern springs of brass including roller and roller plate, fixed in repairs complete.

S&F Floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel fixed in floor with over all length of cover plate 140 mm fixed in repairs complete.

S&F in repair Door closer hydraulically regulated, aluminium body, designation No.3, universal type, suitable for door shutters of weight between 61 to 80 Kg, fixed in repairs complete.

S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire of average width of aperture 1.18mm fixed with tinned tacks or galvanised wire staple

Hacking out old broken glass (any thickness size, quality or description) from wooden/ steel frames glazed with putty or fixed with wooden beads/metal pins complete.

S&F sheet glass ordinary quality and glazing with oil putty in square n. exc 0.50 Sqm in each pane 3.50mm thick all as specified

All as per item No above but frosted glass.

Dismantling boarding, any description, fixed in any position with screw complete

M&L for prelaminated particle board ,interior grade prelaminated one side with decorated choice lamination and other side balancing white lamination fixed with screws to timber frame work 18/19mm thick.(Make- Rajshree or equivalent)

S&F, Ist class hard wood external teak wood leaping, 6mm thick to 18-19mm thick block board or veneered particle board, fixed with nails complete.

Material and labour for 2nd class hard wood(Sal) plain fillets square rectangular or triangular in section clean swan secured with nails or brads sectional area exc 6 and not exc 13 sq cm , fixed in repair complete all as specified and directed by Engr-in charge

Supply and fix continues (piano) hinges, mild steel, bright finish width of flap (when open) 30mm.

S&F magnetic catches with steel body ‘H’ type, fixed to kitchen/cupboard shutter complete.

S&F, 75mm Long polished extruded brass Handle fixed with screw.

S&F,50 mm knob be bright polished hard wood fixed with screw.

Hasp and staple 125mm size, safety type, aluminum anodised including bolt to hinge plate, fixed in repairs with screws complete.

Rubber door seal 32mm wide with Aluminium strip of size 19mm wide fixed with machine steel screw with washer complete

Taking down existing ceiling of any type and any description and provn of E-board 4mmthick self design type tiles ceiling on GI Powder coated channel/Tee/Grid of make(Armstrong or equivalent) frame work with the following specification including cutting holes to brick wall built in cement mortar & making good in cm 1:3 of cement concrete 1:2:4 type BO as required :- (a) Plugging to wall around the rooms & supplying & fixing GI Powder coated angle of size 25x25x1.0 mm (b) 1.60mm dia GI wire suspenders with adjustable clamps including fixing to ceiling dash free fasterers (c) 25mm x 25mm x 1.5mm GI Powder coated tee as in main & cross members at 595mm c/c supported suspenders alongwith adjustable clamp to maintain level . (d) E-board 4mmthick self design type ceiling tiles of size 610mm x610mm confirming to relevant IS in squares of GI Powder coated Tee with clips made to shape. Shade and pattern of E- board shall be as approved by GE

M&L for cutting holes into of through brick walls exc half brick but n exc one brick built in cement mortar for inserting hold fast and making good dismental porton in cement mortar 1:3 or cement concrete 1:2:4 type B1 all as specified and directed

S&F in repair 125 mm size Brass chromium plated shower rose suitable for 15 mm bore pipe complete all as specified and directed. Make-Hindware

S&F in repair 15mm bore 2 way bib tap cast copper alloy with cruth or butterfly handle screwed down, screwed for iron pipe or for brass ferrule 15mm bore including CP wall flange all as specified and directed

S&F in repair fancy type chromium plated brass bib cock with flange with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete Make :Hindware.

S&F in repairs CP Health faucet including flexible pipe of 1 m length fixing to 15m dia pipe with brass check nut complete all as specifed and directed. Make- Hindware)

S&F in repair PVC (SWR) pipes single socketed 110 mm bore in any length with rubber ring joints fixed to walls

S&F in repair PVC (SWR) pipes single socketed 75 mm bore in any length with rubber ring joints fixed to walls

S&F PVC (SWR) bends any radius 110 mm bore

S&F PVC (SWR) Tee any radius 110 mm bore

Taking down carefully old unserviceable copper/aluminium point wiring From existing conduit / batten type (light, fan, socket or power point) complete such as switches, ceiling rose, pendent holder, bell ,regulator and socket etc and making good the disturbed surface of wall / floor/ ceiling etc as original complete all as directed.

M&L for point wiring complete with 1.5 Sq mm (nominal area) FRLS, PVC insulated un-sheathed and multistranded copper conductor cable ISI marked and including PVC concealed ISI marked of size 20 mm dia medium grade and PVC conduit fittings such as tees, bends,including FRLS, PVC insulated unsheathed 1.5 Sqmm multistranded copper earth wire, connecting to common earth dolly with and incl Metal flush box of suitable size for fixing switches/sockets/fan regulator etc , with and including cover plates of suitable size and making good surface as original complete all as directed for the following :-

(a) one light point / fan point/ wall fan point/ bell/ buzzer controlled by one 1-way switch/ bell push.

(b) one socket outlet point 5 amps on the Same board.

(c) one socket outlet point 5 amps on the independent board.

S & F for switch piano, flush type single pole, one way 5 Amp complete all as directed.

S & F for of socket outlet 2 in 1, 3 pin, 5A, flush type complete all as directed.

S & F for of socket outlet 2 in 1, 3 pin, 5 and 15A, flush type complete all as directed.

S&F of step type Fan regulator , 120 watts, piano flush type complete all as directed.

S&F of Modular switch 16 Amp, 1 way, 1 module size complete all as directed.

S&F of Modular socket 6/16 Amp multipurpose, 2 module size complete all as directed.

S&F in repair Modular Metal Flush Box 6 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface complete all as specified and as directed

S&F in repair Modular white cover plate with frame 6 module all as directed

Supply and fixing in replacement of LED mirror light fitting 10 watt, cool/warm white and making all electric connections complete all as directed.

Supply and fixing in replacement of LED tube light fitting, 20 watt. with and including all electric connections complete all as specified and as directed.

Replacement of LED lamp 7W/9W,with base B22/ E27 , round type, 230V, AC-50 Hz, warm/cool white complete all as specified and as directed.

Supply and fixing in replacement of Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 04 way, 240 volts with bus bar rating 200 Amps including dust and vermin proof and making all necessary connections complete all as directed.

Supply and fixing in replacement of MCB C Curve type, 10 kA, 10 to 32 Amp, Single Pole with over load and short circuit protection complete all as directed.

Supply and fixing in replacement of MCB B Curve type, 10 kA, 40 Amp, Single Pole with over load and short circuit protection complete all as directed.

Supply and fixing in replacement of MCB C Curve type, 10 kA, 40- 63 Amps, SPN with over load and short circuit protection complete all as directed.

Material and labour in replacement for Sub main wiring with 2 run of 4.0 Sqmm (nominal area) FR, PVC insulated, unsheathed andmultistranded copper conductor cable ISI marked, drawn in to existing PVC conduit with and including 4.0 Sqmm (nominal area) FR, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked as earth wire, connected with thimble complete all as specified.

Material and labour in replacement for Sub main wiring with 2 run of 10 Sqmm (nominal area) FR, PVC insulated, unsheathed andmultistranded copper conductor cable ISI marked, drawn in to existing PVC conduit with and including 10 Sqmm (nominal area) FR, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked as earth wire, connected with complete all as specified.

M&L in replacement of PVC insulated unsheathed single core multistranded copper conductor wire of size 1.5 sqmm, 1100 volts grade cable, FRLS,complete all specified and as directed.

M&L in replacement of PVC insulated unsheathed single core multistranded copper conductor wire of size 2.5 sqmm, 1100 volts grade cable, FRLS,complete all specified and as directed.

M&L in replacement of PVC insulated unsheathed single core multistranded copper conductor wire of size 4.0 sqmm, 1100 volts grade cable, FRLS,complete all specified and as directed.

Supply and fixing in replacement of MCCB incommer Distribution Board ( Vertical Load line DB) double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, VTPN 04 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCCB as incommer and MCB as outgoing and making all necessary connections and taking out the old unserviceable DB complete all as directed. Note:- MCCB & MCBs will be measured and paid separately

S & F in replacement of MCCB, 415 volts, three pole of cap 160 Amps, 36 KA, ICS = 100% ICU, with Thermal - Magnetic Release, including necessary spreader / thimbles of suitable size and making connections complete all as directed.

S & F in replacement plastic body capacitor of capacity 2.5- 3.15 mfd with wire suitable for single phase motor and making connection complete all as specified and directed

S&F PVC Gang Box suitable for two No 5 Amps Switch . complete all as specified and as directed.

S&F PVC Gang Box suitable for one No 5 Amps Switch and one No 5 Amps Socket complete all as specified and as directed

S&F PVC Gang Box suitable for five No 5 Amps Switch complete all as specified and as directed

S&F PVC Gang Box suitable for four No 16 Amps Switch complete all as specified and as directed

Supply and fixing of PVC casing & caping ( ISI marked) 20 mm width double lock type inclusive of all fittings such as tees, bends, elbow, etc and all fixing accessories such as couples,Pvc Rawal Plugs, saddles, etc complete all as directed.

Supply and fixing of PVC casing & caping ( ISI marked) 25 mm width double lock type inclusive of all fittings such as tees, bends, elbow, etc and all fixing accessories such as couples,Pvc Rawal Plugs, saddles, etc complete all as directed.

Supply and fixing of PVC casing & caping ( ISI marked) 32 mm width double lock type inclusive of all fittings such as tees, bends, elbow, etc and all fixing accessories such as couples,Pvc Rawal Plugs, saddles, etc complete all as directed.

Serviceing and testing of IDECOOL 6-6000 CFM two stage cooling system with Patented DAMA heat Exchanger and 10 micron filtration complete all as specified and directed.

VED PRAKASH ARORA

Vipul Construction

STAR CONSTRUCTION CO